LG Electronics USA LTOGENA Cellular/PCS CDMA Automotive Transceiver with Bluetooth User Manual 1
LG Electronics USA Cellular/PCS CDMA Automotive Transceiver with Bluetooth Users Manual 1
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
LG Telematics Test Manual [Gen90L] Version 1.0 2009.07.03 LG Telematics Revision History Author Sangjin Han Description Merged document. Document start Date July 3,2009 LG Telematics Contents 1. How to Place a Call 2. ATT Tool for TCU Setting 3. VCP Commander FCC information LG Telematics 1. How to Place a Call Fig.9 LG Telematics LG Telematics 2. ATT Tool for TCU Setting 1) Set COM Port Fig 18 2) Check Connection Status Fig.19 LG Telematics 3) NAD Screen Fig.20 4) Select Forced band mode and apply it Fig.21 LG Telematics - Click to see the selectable menu for changing - After select the Service mode, click Control to apply it. Fig.22 5) Check result of change. Fig.23 LG Telematics 3. VCP Commander 1) Run “VCP-Commander.exe”. This tool is single executable file. 2) Connect the named CAIT -port to your PC’s serial port. 3) Check the serial baud rate of VCP. (Power-up default is 38400 bps) 4) Select your PC’s COM-port, Press Connect button. 5) Test the right connection. Press verify that Status END , is flipped ( Cmd FAIL to Cmd OK ). Fig.25 6) Select command from drop-down-list and enter Value 1 or Value 2 according to each command. 7) Press SET button, then status is flipped. 8) Below table are command lists, value 1 and value 2. “Command” “Value 1” “Value 2” Description PREF_AUTOMATIC Don’t care Don’t care Set system selection mode Don’t care Don’t care Set MOB_P_REV PREF_CELL_ONLY PREF_PCS_ONLY PREF_CDMA_ONLY PREF_ANALOG_ONLY PREF_HOME_ONLY PREF_P_REV_3 PREF_P_REV_4 PREF_P_REV_6 temporally LG Telematics A_KEY See See example 1 example 1 PREF_FOR_RC 1~5 Don’t care Set NV_PREF_FOR_RC_I IMSI_MCC 3-digit Don’t care Set NV_IMSI_MCC_I Don’t care Set NV_IMSI_11_12_I decimal Set A-key value ie. “120” IMSI_11_12 2-digit decimal ie, (MNC) “12” SCM One-byte Don’t care Set NV_SCM_I Don’t care Set decimal SLOT_SYCLE_INDEX 0~7 NV_SLOT_CYCLE_INDEX_I MOB_TERM_HOME 0 or 1 Don’t care Enable(1) or Disable(0) MOB_TERM_FOR_SID 0 or 1 Don’t care Enable(1) or Disable(0) MOB_TERM_FOR_NID 0 or 1 Don’t care Enable(1) or Disable(0) Dial_SO2_LB, Don’t care Don’t care Originate call with Dial_SO3_EVRC, specified SO. Dial number Dial_SO9_LB13, is fixed to “111” internally. Dial_SO54, Dial_SO55_LB, Dial_SO32768, Dial_SO32798, Dial_SO32799, CALL_ANSWER Don’t care Don’t care Answer incoming call. CALL_END Don’t care Don’t care End call. Power_Down Don’t care Don’t care Force power-down “Communication Module” only. After this command, must do unplug then plug main VCP power to power-up Module. Power_Recycle Don’t care Don’t care Force power-recycle “Communication Module” only. LG Telematics FCC Information FCC part 15.19 This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Installation This unit should only be installed by qualified personnel by GMOnstar. Address P.O. Box 430627 Pontiac, MI 48343
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Print high-res Author : sjhan Create Date : 2009:07:15 15:37:43+09:00 Modify Date : 2010:11:10 15:15:27-05:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2010:11:10 15:15:27-05:00 Format : application/pdf Title : Microsoft Word - Users Manual for LG Telematics.doc Creator : sjhan Document ID : uuid:482c1359-892a-41cd-bbad-3ef740b90b99 Instance ID : uuid:5a61674e-70ee-468e-a3e1-b6772f165aab Page Count : 11EXIF Metadata provided by EXIF.tools