LG Electronics USA T19LE Color Monitor User Manual

LG Electronics USA Color Monitor T910BJ T910B ENG

a href="https://usermanual.wiki/LG-Electronics-USA" itemprop="url"> LG Electronics USA >

USERS MANUAL

AnnouncementNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter ference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
A1This unit has been engineered and manufactured to ensure your personalsafety, however improper use may result in potential eletrical shock or firehazards. In order to allow the proper operation of all safeguardsincorporated in this monitor, observe the following basic rules for itsinstallation, use, and servicing. Keep it in an accessible place for futurereference.On SafetyUse only the power cord supplied with the unit. In case you use another powercord, make sure that it is certified by the applicable national standards if not beingprovided by the supplier. If the power cable is faulty in any way, please contact themanufacturer or the nearest authorized repair service provider for a replacement.The power supply cord is used as the main disconnect device. Ensure that thesocket-outlet is easily accessible after installation.Operate the monitor only from a power source indicated in the specifications ofthis manual or listed on the monitor. If you are not sure what type of power supplyyou have in your home, consult with your dealer.Overloaded AC outlets and extension cords are dangerous. So are frayed powercords and broken plugs. They may result in a shock or fire hazard. Call your servicetechnician for replacement.Hands must be dry when holding the power plug to avoid an electric shock.Do not damage the power cord by disassembling, bending, pulling or heating up.It can cause fire or electric shock.Make sure to completely insert the power plug. Insecure connections can causefire.Do not Open the Monitor.There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the monitor is not operating properly.To Avoid Personal Injury :Do not place the monitor on a sloping shelf unless properly secured.Use only a stand recommended by the manufacturer.Do not try to roll a stand with small casters across thresholds or deep pilecarpets.Important Precautions
Download:
Mirror Download [FCC.gov]
Document ID430435
Application IDkDFWn2abMsCSpyPUOsypZQ==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize116.3kB (1453798 bits)
Date Submitted2004-06-11 00:00:00
Date Available2004-06-11 00:00:00
Creation Date2003-03-14 17:27:08
Producing SoftwareAcrobat Distiller 4.0 for Macintosh
Document Lastmod2004-04-22 10:34:15
Document TitleT910BJ(T910B)-ENG
Document CreatorQuarkXPress3.3: LaserWriter 8 KH-8.7.1
Document Author: **
FCC ID Filing: BEJT19LE

Navigation menu