LIDACHENG TECHNOLOGY IXSW055 Switch Wireless Controller User Manual

SHENZHEN LIDACHENG TECHNOLOGY CO.,LTD Switch Wireless Controller

Contents

User Manual

Switch Wireless Controller
Specificate
文件编号：
发行日期：2018/06/15
版本：
B1
A键
右摇杆
B键
A键
Button Function
Up
screenshot
Down
Right
Power LED
Select
Left Joystick
TURBO
L1
L2
HOME
R2
R1
X
B
Y
start
Reset
Y
X
A
B
Right Joystick
Switch Wireless Controller
Specificate
文件编号：
发行日期：2018/06/15
版本：
B1
一、Connection Instruction
1. Turn on the Switch console
2. Move the cursor to the Joy-con icon on the Switch console display
3. Press the A button on the Joy-con, enter to open the Bluetooth operation interface
4. Press the A button on the Joy-con to turn on the Bluetooth connection
Switch Wireless Controller
Specificate
文件编号：
发行日期：2018/06/15
版本：
B1
5. Press the Y+Home button on the Switch Wireless Controller for 3 seconds. Turn on the controller
Bluetooth mode. After the Bluetooth is turned on, the controller enters the pairing mode with the Switch
console automatically. After the Bluetooth connection is successful, the power indicator light is on.
6. After the controller is successfully connected, the controller icon will appear on the Switch console
display. Press the A button on the wireless controller to confirm and press the B button to return to the
main page for game operation.
7. If there is no matching within 2 minutes, the controller will sleep automatically. Press Y+HOME on the
wireless controller again to pair with the Switch console
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.

Navigation menu