LINKSYS EA4500 802.11 a/b/g/n AP User Manual Operation

Download:
Mirror Download [FCC.gov]
Document ID	1630148
Application ID	rqNE3drNnNQ0A0dLio8P/g==
Document Description	User Manual - Operation
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	70.6kB (882505 bits)
Date Submitted	2012-02-02 00:00:00
Date Available	2012-04-16 00:00:00
Creation Date	2011-12-07 11:03:36
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2012-01-31 14:03:00
Document Title	User Manual - Operation
Document Creator	Microsoft® Office Word 2007
Document Author:	VeryPDF

Linksys EA-Series Routers
Linksys EA-Series
Table of Contents
Table of Contents
Product overview
EA2700/EA3500
Back view
Bottom view
EA4500
Top view
Back view
Wireless Security
How to start Cisco Connect
Use Cisco Connect to manage your router
How to manually set up your router
Language
Internet Setup
Wireless > Basic Wireless Settings
Wireless Settings
Troubleshooting
How to run Cisco Connect after setup
Your router was not successfully set up
Get Windows XP Service Pack 3 message
Your Internet cable is not plugged in message
Cannot access your router message
Device not found message
11
12
12
13
14
15
Specifications
Advanced Configuration
How to open the browser-based utility
Setup > Basic Setup
Personal options
Office options
Option settings
Setting Up Your EA-Series Router
Where to find more help
How to set up your router
Wireless > Wireless Security
Linksys EA2700
Linksys EA3500
Linksys EA4500
17
18
19
Linksys EA-Series
Product overview
Product overview
•
Power indicator—Stays on steadily while power is connected and
following a successful Wi-Fi Protected Setup connection Flashes slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error
•
Power—Connect the included AC power adapter to this port
EA2700/EA3500
CAUTION
Use only the adapter that came with your router
Back view
•
Power button—Press | (on) to turn on the router
Bottom view
Power port
USB port (EA3500 only)
Internet port
Ethernet ports
Power indicator
Wi-Fi Protected Setup button
Your router’s appearance may vary
•
USB port (EA3500 only)—To easily share disk storage with other users on
your network or on the Internet, connect a USB drive to this port
•
Ethernet ports—Connect Ethernet cables (also called network
cables) to these Fast Ethernet (10/100, for E1200 and E1500) or Gigabit
(10/100/1000, for EA2700 and EA3500) ports, color coded blue, and to other
wired Ethernet network devices on your network
•
Internet port—Connect an Ethernet cable (also called a network or
Internet cable) to this port, color coded yellow, and to your modem
Your router’s appearance may vary
•
Reset button—Press and hold this button for 5-10 seconds (until the
port lights flash at the same time) to reset the router to its factory defaults
You can also restore the defaults using the browser-based utility
Wi-Fi Protected Setup™ button—Press this button to easily configure
wireless security on Wi-Fi Protected Setup-enabled network devices For
more information, see ―Wireless Security‖ on page 8
Linksys EA-Series
Product overview
Back view
EA4500
Top view
Ethernet ports
Internet port
Power port
Wi-Fi Protected Setup button
Reset button
USB port
•
Ethernet ports—Connect Ethernet cables (also called network cables)
to these Gigabit (10/100/1000) ports, color coded blue, and to other
wired Ethernet network devices on your network
•
Internet port—Connect an Ethernet cable (also called a network or
Internet cable) to this port, color coded yellow, and to your modem
•
Wi-Fi Protected Setup™ button—Press this button to easily configure
wireless security on Wi-Fi Protected Setup-enabled network devices For
more information, see ―Wireless Security‖ on page 8
•
USB port—To easily share disk storage with other users on your network
or on the Internet, connect a USB drive to this port
•
Reset button—Press and hold this button for 5-10 seconds (until the
port lights flash at the same time) to reset the router to its factory defaults
You can also restore the defaults using the browser-based utility
•
Power—Connect the included AC power adapter to this port
Indicator light
•
Indicator light—Stays on steadily while power is connected and
following a successful Wi-Fi Protected Setup connection Pulses slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error
CAUTION
Use only the adapter that came with your router
•
Power button—Press | (on) to turn on the router
Linksys EA-Series
Setting Up Your EA-Series Router
Setting Up Your EA-Series Router
To start Cisco Connect for the first time:
Where to find more help
1 . Insert the CD into your CD or DVD drive
In addition to this User Guide, you can find help at these locations:
•
2 . Click Set up your Linksys Router
Linksys.com/support (documentation, downloads, FAQs, technical
support, live chat, forums)
•
Cisco Connect help (run Cisco Connect, then click Learn More where
available)
•
Browser-based utility context-sensitive help (open the utility, then click
Help in the right-side column )
If you do not see this:
•
For Windows, click Start, Computer, then double-click the CD drive
and the Setup icon
•
For Mac, double-click the CD icon on your desktop, then double-click
the Setup icon
3 . Follow the on-screen instructions to complete your router setup
How to set up your router
The easiest and fastest way to set up your router is to run the Cisco Connect
setup software
How to start Cisco Connect
When you run the setup CD, Cisco Connect (your router’s setup software) is
automatically installed onto your computer You can then use Cisco Connect to
easily manage your router
NOTE:
If you lose your setup CD, you can download the software from
Linksys.com/support
Use Cisco Connect to manage your router
After your router has been set up and Cisco Connect has been installed, you
can use Cisco Connect to easily manage many of your router’s settings such as:
•
Connect devices to your network
•
Test your Internet connection speed
•
Configure parental controls
•
Set up guest access
•
Change your router’s name and password
How to manually set up your router
After setting up the router with the setup software (located on the CD), the
router will be ready for use If you would like to change its advanced settings,
or if the software does not run, use the router’s browser-based utility You can
access the utility with a web browser on a computer connected to the router
For more information on using the utility, see ―How to open the browser-based
utility‖ on page 4
Linksys EA-Series
Advanced Configuration
Advanced Configuration
How to open the browser-based utility
2 . Enter the user name and password, then click oK The utility’s main menu
opens
To access some advanced settings, you need to open the browser-based utility
To open the browser-based utility:
1 . Run Cisco Connect, click Change under Router settings, click Advanced
settings, then click oK
– or –
TIPS
If you set up your router without using Cisco Connect, your router’s
default password is admin (You can leave the user name blank )
If you used Cisco Connect to set up your router, you can see your
router’s user name and password by running Cisco Connect, then
clicking Router settings
Open a web browser on a computer connected to your network, then go
to 192.168.1.1
The router prompts you for a user name and password
Linksys EA-Series
Advanced Configuration
Setup > Basic Setup
Language
The first screen that appears is the Basic Setup screen This allows you to change
the router’s general settings
Select your language To use a different language, select one from the dropdown menu The language of the browser-based utility will change five seconds
after you select another language
Internet Setup
The Internet Setup section configures the router to your Internet connection
Most of this information can be obtained through your Internet Service
Provider (ISP)
Internet Connection Type
Select the type of Internet connection your ISP provides from the drop-down
menu The available types are:
•
Automatic Configuration - DHCP
•
Static IP
•
PPPoE
•
PPTP
•
L2TP
•
Telstra Cable
Automatic Configuration - DHCP
The default Internet Connection Type is Automatic Configuration - DHCP
(Dynamic Host Configuration Protocol) Keep the default only if your ISP
supports DHCP or if you connect using a dynamic IP address (This option
usually applies to cable connections )
Static IP
If you are required to use a fixed IP address to connect to the Internet, select
Static IP
PPPoE
If you have a DSL connection, check whether your ISP uses Point-to-Point
Protocol over Ethernet (PPPoE) If so, select PPPoE
Linksys EA-Series
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to
connections in Europe If your PPTP connection supports DHCP or a dynamic IP
address, then select obtain an IP Address Automatically If you are required
to use a fixed IP address to connect to the Internet, then select Specify an IP
Address and configure the options below
Advanced Configuration
Wireless > Basic Wireless Settings
The basic settings for wireless networking are set on this screen
NOTE
After you set up the wireless network(s), set up the wireless security
settings
L2TP
Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to
connections in Israel
Wireless Settings
Telstra Cable
Telstra Cable is a service that generally applies to connections in Australia
Connect on Demand or Keep Alive
The Connect on Demand and Keep Alive options let you choose whether
the router connects to the Internet only as needed (useful if your ISP charges
for connect time), or if the router should always be connected Select the
appropriate option
network Mode Select the wireless standards your network will support
•
Mixed If you have Wireless-N (2 4 GHz), Wireless-G, and Wireless-B devices
in your network, keep the default, Mixed
•
Wireless-B/G only If you have both Wireless-B and Wireless-G (2 4 GHz)
devices in your network, select Wireless-B/G only
•
Wireless-B only If you have only Wireless-B devices, select Wireless-B
only
•
Wireless-G only If you have only Wireless-G devices, select Wireless-G
only
•
Wireless-n only If you have only Wireless-N (2 4 GHz) devices, select
Wireless-n only
•
Disabled If you have no Wireless-B, Wireless-G, and Wireless-N (2 4 GHz)
devices in your network, select Disabled
NOTE
If you have a dual-band router, you can select Mixed, Wireless-A
Only, Wireless-N Only, or Disabled for the 5 GHz band
If you are not sure which mode to use, keep the default, Mixed
Linksys EA-Series
Advanced Configuration
network name (SSID) The Service Set Identifier (SSID) is the network name
shared by all devices in a wireless network It is case-sensitive and must not
exceed 32 keyboard characters The default is Cisco followed by the last 5 digits
of the router’s serial number, which is found on the bottom of the router If
you used the setup software for installation, then the default Network Name is
changed to an easy-to-remember name
NOTE
If you restore the router’s factory default settings (by pressing
the Reset button or using the Administration > Factory Defaults
screen), the Network Name will return to its default value Change
the Network Name back to its original name, or you will have to
reconnect all devices on your wireless network to the new network
name
Channel Width For best performance in a network using Wireless-B,
Wireless-G and Wireless-N (2 4 GHz) devices, select Auto (20 MHz or 40 MHz)
For a channel width of 20 MHz, keep the default, 20 MHz only
Channel Select the channel from the drop-down list for Wireless-B, Wireless-G,
and Wireless-N (2 4 GHz) networking If you are not sure which channel to
select, then keep the default, Auto
SSID Broadcast When wireless clients survey the local area for wireless
networks to associate with, they will detect the SSID broadcast by the router
To broadcast the router’s SSID, keep the default, Enabled If you do not want to
broadcast the router’s SSID, then select Disabled
Linksys EA-Series
Wireless Security
Wireless Security
Wireless > Wireless Security
Option settings
The wireless security settings configure the security of your wireless network(s)
The router supports the following wireless security options: WPA2/WPA Mixed
Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2
Enterprise, WPA Enterprise, WEP, and RADIUS (WPA stands for Wi-Fi Protected
Access WEP stands for Wireless Equivalent Privacy RADIUS stands for Remote
Authentication Dial-In User Service )
WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal
NOTES
If you select WPA2/WPA Mixed Mode as your Security Mode, each
device in your wireless network MUST use WPA2/WPA and the
same passphrase
If you select WPA2 Personal as your Security Mode, each device
in your wireless network MUST use WPA2 Personal and the same
passphrase
Personal options
Security option
Strength
WPA2 Personal
Strongest
WPA2/WPA Mixed Mode
WPA2: Strongest
WPA: Strong
WPA Personal
Strong
WEP
Basic
Office options
The office options are available for networks that use a RADIUS server
for authentication The office options are stronger than the personal
options because WPA2 or WPA provides encryption while RADIUS provides
authentication
Security option
Strength
WPA2 Enterprise
Strongest
WPA2/WPA Enterprise Mixed
Mode
WPA2: Strongest
WPA: Strong
WPA Enterprise
Strong
RADIUS
Basic
If you select WPA Personal as your Security Mode, each device
in your wireless network MUST use WPA Personal and the same
passphrase
Passphrase Enter a passphrase of 8-63 characters The default is password If
you used the setup software for installation, then the default is changed to a
unique passphrase, which you can find by running Cisco Connect, then clicking
Router settings
Linksys EA-Series
WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA
Enterprise
These option is used in coordination with a RADIUS server (These should only
be used when a RADIUS server is connected to the router )
NOTES
If you select WPA2/WPA Enterprise Mixed Mode as your Security
Mode, each device in your wireless network MUST use WPA2/WPA
Enterprise and the same shared key
Wireless Security
WEP
WEP is a basic encryption method, which is not as secure as WPA
NOTE:
If you select WEP as your Security Mode, each device in your
wireless network MUST use WEP and the same encryption and
shared key
If you select WPA2 Enterprise as your Security Mode, each device
in your wireless network MUST use WPA2 Enterprise and the same
shared key
If you select WPA Enterprise as your Security Mode, each device
in your wireless network MUST use WPA Enterprise and the same
shared key
Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or
104/128-bit (26 hex digits) The default is 40/64-bit (10 hex digits)
Passphrase Enter a passphrase to automatically generate WEP keys Then
click Generate
Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually
RADIUS Server Enter the IP address of the RADIUS server
TX Key Select a default TX (Transmit) Key to use The default is 1
RADIUS Port Enter the port number of the RADIUS server The default is 1812
Shared Key Enter the key shared between the router and the server
Linksys EA-Series
Wireless Security
RADIUS
Disabled
This option features WEP used in coordination with a RADIUS server (This
should only be used when a RADIUS server is connected to the router )
If you choose to disable wireless security, you will be informed that wireless
security is disabled when you first attempt to access the Internet You will given
the option to enable wireless security, or confirm that you understand the risks
but still wish to proceed without wireless security
NOTE:
If you select RADIUS as your Security Mode, each device in your
wireless network MUST use RADIUS and the same encryption and
shared key
RADIUS Server Enter the IP address of the RADIUS server
RADIUS Port Enter the port number of the RADIUS server The default is 1812
Shared Secret Enter the key shared between the router and the server
Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or
104/128-bit (26 hex digits) The default is 40/64-bit (10 hex digits)
Passphrase Enter a passphrase to automatically generate WEP keys Then
click Generate
Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually
TX Key Select a default TX (Transmit) Key to use The default is 1
10
Linksys EA-Series
Troubleshooting
Troubleshooting
This chapter can help you solve common setup issues and connect to the
Internet Your router’s CD includes Cisco Connect, the router setup software
that makes it easy to connect network devices, change router settings, control
guest access, enable parental controls, and connect to the Internet Cisco
Connect is also installed onto your computer during setup If Cisco Connect
is prevented from completing the setup, this chapter will guide you through
finding solutions
How to run Cisco Connect after setup
When you run the setup CD, Cisco Connect is automatically installed onto your
computer You can then use Cisco Connect to easily manage your network
To start Cisco Connect on a Windows computer:
1 . Click Start, All Programs, then click Cisco Connect
The Cisco Connect main menu opens
To start Cisco Connect on a Mac oS X computer:
1 . Open Finder and click Applications in the left panel
2 . Double-click the Cisco Connect icon
You can find more help from our award-winning customer support at
linksys.com/support.
The Cisco Connect main menu opens
11
Linksys EA-Series
Troubleshooting
Your router was not successfully set up
•
Temporarily disable your computer’s firewall (see the security software’s
instructions for help), then run the Setup program again on the router’s
CD
•
If you have another computer, use that computer to run the Setup
program again on the router’s CD
Get Windows XP Service Pack 3 message
On Windows XP computers, Cisco Connect requires Service Pack 3 in order to
work If you receive a ―Get Windows Service Pack 3‖ message when setting up
your router for the first time, follow these troubleshooting steps
If Cisco Connect did not complete the setup, you can try the following:
•
Press and hold the Reset button on your router with a paperclip or pin
for 10-15 seconds, then run the Setup program again on the router’s CD
If the currently installed Service Pack is older than version 3, you need to
download and install Service Pack 3
TIP
To temporarily connect to the Internet and download the required
Service Pack, you can use the included Ethernet cable to connect
your computer directly to your modem
To install Service Pack 3:
1 . Click the link in the Cisco Connect error message or connect to the
Microsoft Update website (update.microsoft.com/windowsupdate)
2 . Follow the instructions on the website or contact Microsoft if you need
further help
Your router’s appearance may vary
3 . After downloading and installing Service Pack 3, run the Setup program
on your router’s CD
12
Linksys EA-Series
Troubleshooting
Your Internet cable is not plugged in
message
If you get a ―Your Internet cable is not plugged in‖ message when trying to set
up your router, follow these troubleshooting steps
Back view of cable modem
Back view of DSL modem
2 . Make sure that your modem is connected to power and is turned on If it
has a power switch, make sure that it is set to the on or l position
3 . If your Internet service is cable, verify that the cable modem’s CABLE port
is connected to the coaxial cable provided by your ISP
Or, if your Internet service is DSL, make sure that the DSL phone line is
connected to the modem’s DSL port
To fix the problem:
1 . Make sure that an Ethernet or Internet cable (or a cable like the one
supplied with your router) is securely connected to the yellow Internet
port on the back of the router and to the appropriate port on your
modem This port on the modem is usually labeled Ethernet, but may
be named Internet or WAN
4 . If your computer was previously connected to your modem with a USB
cable, disconnect the USB cable
5 . Return to the Cisco Connect window and click next to try again If the
window has already been closed, run the Setup program again on the
router’s CD
Back view of router
13
Linksys EA-Series
Cannot access your router message
If you cannot access your router because your computer is not connected to
your network, follow these troubleshooting steps
Troubleshooting
3 . Click your own network name, then click Connect In the example
below, the computer was connected to another wireless network named
JimsRouter The name of the Linksys EA-Series network, BronzeEagle in this
example, is shown selected
To access your router, you must be connected to your own network If you
currently have wireless Internet access, the problem may be that you have
accidentally connected to a different wireless network
To fix the problem on Windows computers:
1 . On your Windows desktop, right-click the wireless icon in the system tray
4 . If you are prompted to enter a network key, type your password (Security
Key) into the network key and Confirm network key fields, then click
Connect
2 . Click View Available Wireless networks A list of available networks
appears
Your computer connects to the network, and you should now be able to
access the router
14
Linksys EA-Series
To fix the problem on Mac computers:
1 . In the menu bar across the top of the screen, click the AirPort icon A list
of wireless networks appears Cisco Connect has automatically assigned
your network a name
Troubleshooting
Device not found message
If you get a ―Device not found‖ message when trying to connect a network
device (such as an iPhone, iPod, or smartphone), follow these troubleshooting
steps
In the example below, the computer was connected to another wireless
network named JimsRouter The name of the Linksys EA-Series network,
BronzeEagle in this example, is shown selected
2 . Click the wireless network name of your Linksys EA-Series router
(BronzeEagle in the example)
3 . Type your wireless network password (Security Key) into the Password
field, then click oK
TIP
For a stronger signal during initial setup, move your wireless
devices near your router Long distances make it harder for the
router to detect the devices
To fix the problem:
1 . Run Cisco Connect
15
Linksys EA-Series
2 . Click Computers and devices The Computers and other devices window
appears
3 . Click other Wireless devices
Troubleshooting
Example: On your Smartphone or other wireless device, locate the WiFi menu and search for available wireless networks In this example,
using the network information provided by Cisco Connect shown in the
previous screen, click BronzeEagle
Android
4 . Enable your wireless network device’s Wi-Fi connection, then search for
your wireless network name See your device documentation for help
NOTE
Your wireless device must support WPA/WPA2
iPhone
7 . Enter the password (Security Key) provided by Cisco Connect In this
example, the security key is B6eM9UkCjz
NOTE
The password is case sensitive Make sure that you enter letters in
the correct case
5 . On the wireless network device, select the network name of your router
and enter the password (Security Key)
6 . In Cisco Connect, click next
8 . When your wireless device is successfully connected to your wireless
network, enter a name for the device in Cisco Connect, then click Finish
16
Linksys EA2700
Specifications
Environmental
Linksys EA2700
Model Name
Linksys EA2700
Description
Dual-Band N600 Router with Gigabit
Model Number
EA2700
Standards
802 11n, 802 11a, 802 11g, 802 11b, 802 3,
802 3u, 802 3ab
# of Antennas
4 total, 2 internal antennas per each
2 4 GHz & 5 GHz radio band
Detachable (y/n)
No
Modulation
802 11b: CCK, QPSK, BPSK
802 11g: OFDM
802 11a: OFDM
802 11n: BPSK, QPSK, 16-QAM,
64-QAM
Receive Sensitivity
(Typical)
2 4 GHz
802 11b: -87 dBm @ 11 Mbps
802 11g: -70 dBm @ 54 Mbps
802 11n 20 MHz: -70 dBm @ MCS15
802 11n 40 MHz: -66 dBm @ MCS15
5 GHz
802 11a: -70 dBm @ 54 Mbps
802 11n 20 MHz: -66 dBm @ MCS23
802 11n 40 MHz: -62 dBm @ MCS23
Antenna Gain in dBi
Dimensions
225 x 35 x 180 mm
(8 86‖ x 1 38‖ x 7 09‖)
Unit Weight
452 g (15 94 oz)
Power
12V, 1A
Certifications
FCC, IC, CE, Wi-Fi A/B/G/N
Operating Temp
0 to 40°C (32 to 104°F)
Storage Temp
-20 to 60°C (-4 to 140°F)
Operating Humidity
10 to 80%, relative humidity,
non-condensing
Storage Humidity
5 to 90% non-condensing
NOTES
For regulatory, warranty, and safety information, see the CD that
came with your router or go to Linksys.com/support
Specifications are subject to change without notice
Maximum performance derived from IEEE Standard 802 11
specifications Actual performance can vary, including lower
wireless network capacity, data throughput rate, range and
coverage Performance depends on many factors, conditions and
variables, including distance from the access point, volume of
network traffic, building materials and construction, operating
system used, mix of wireless products used, interference and other
adverse conditions
2 4 GHz:
Antenna 1 (right rear): ≤2 94 dBi
Antenna 2 (front right): ≤3 78 dBi
5 GHz:
Antenna 1 (right front): ≤5 86 dBi
Antenna 2 (front left): ≤4 88 dBi
UPnP
Supported
Security features
WEP, WPA, WPA2
Security key bits
Up to 128-bit encryption
19
Linksys EA3500
Specifications
Storage File System Support FAT, and NTFS, and HFS+
Linksys EA3500
Model Name
Linksys EA3500
Environmental
Description
Dual-Band N750 Router with Gigabit and USB
Dimensions
Model Number
EA3500
6 69‖ x 0 98‖ x 7 48‖
(170 x 25 x 190 mm)
# of Antennas
6 total, 3 internal antennas per
each 2 4 GHz & 5 GHz radio band
Unit Weight
7 62 oz (216 g)
Power
12V, 2A
Detachable (y/n)
No
Certifications
FCC, IC, CE, Wi-Fi A/B/G/N
Switch Port Speed
10/100/1000 Mbps
Operating Temp
32 to 95°F (0 to 35°C)
Ports
Internet, Ethernet (1-4), USB, Power
Storage Temp
-4 to 140°F (-20 to 60°C)
Buttons
Reset, Wi-Fi Protected Setup
Operating Humidity
LEDs
Power, Ethernet (1-4)
10 to 80% relative humidity,
non-condensing
Modulation
802 11b: CCK, QPSK, BPSK
802 11g: OFDM
802 11a: OFDM
802 11n: BPSK, QPSK, 16-QAM, 64-QAM
Storage Humidity
5 to 90% non-condensing
Receive Sensitivity
2 4 GHz
802 11b: -87 dBm @ 11 Mbps (Typical)
802 11g: -77 dBm @ 54 Mbps (Typical)
802 11n (20 MHz): -71 dBm @ MCS15 (Typical)
802 11n (40 MHz): -68 dBm @ MCS15 (Typical)
5 GHz
802 11a: -75 dBm @ 54 Mbps (Typical)
802 11n 20 MHz: -70 dBm @ MCS15 (Typical)
802 11n 40 MHz: -67 dBm @ MCS15 (Typical)
Antenna Gain
NOTES
For regulatory, warranty, and safety information, see the CD that
came with your router or go to Linksys.com/support
Specifications are subject to change without notice
Maximum performance derived from IEEE Standard 802 11
specifications Actual performance can vary, including lower
wireless network capacity, data throughput rate, range and
coverage Performance depends on many factors, conditions and
variables, including distance from the access point, volume of
network traffic, building materials and construction, operating
system used, mix of wireless products used, interference and other
adverse conditions
2 4 GHz (Dipole Antennas)
Antenna 1 ≤ 2.69 dBi (right)
Antenna 2 ≤ 3.67 dBi (left)
Antenna 3 ≤ 4.95 dBi (front)
5 GHz (Dipole Antennas)
Antenna 1 ≤ 4.73 dBi (right)
Antenna 2 ≤ 3.32 dBi (left)
Antenna 3 ≤ 3.88 dBi (front)
UPnP
Supported
Security features
WEP, WPA, WPA2
Security key bits
Up to 128-bit encryption
20
Linksys EA4500
Specifications
Linksys EA4500
Supported File Systems
for Storage Device
FAT32, NTFS, and HSF+
Model Name
Linksys EA4500
UPnP
Supported
Description
Dual-Band N900 Router with Gigabit and USB
Security Features
WEP, WPA, WPA2
Model Number
EA4500
Security Key Bits
Up to 128-bit encryption
Standards
802 11n, 802 11a, 802 11g, 802 11b, 802 3,
802 3u, 802 3ab
Environmental
Radio Frequency
2 4 and 5 GHz
Dimensions
Switch Port Speed
10/100/1000 Mbps (Gigabit Ethernet)
8 86‖ x 0 98‖ x 6 30‖
(225 x 25 x 160 mm)
Ports
Power, USB, Internet, Ethernet (1-4)
Unit Weight
12 7 oz (0 36 g)
Power
12V, 2A
Certifications
FCC, IC, CE, Wi-Fi a/b/g/n,
Windows 7, DLNA
Operating Temp
32 to 104°F (0 to 40°C)
Storage Temp
-4 to 140°F (-20 to 60°C)
Operating Humidity
10 to 80% relative humidity,
non-condensing
Storage Humidity
5 to 90% non-condensing
Buttons
Reset, Wi-Fi Protected Setup
LEDs
Top panel: Power
Back panel: Internet, Ethernet (1-4)
Number of Antennas
6 total, 3 internal antennas per
each 2 4 GHz and 5 GHz radio band
No
Detachable (y/n)
Modulations
Receive Sensitivity
802 11b: CCK, QPSK, BPSK
802 11g: OFDM
802 11a: OFDM
802 11n: BPSK, QPSK, 16-QAM, 64-QAM
2 4 GHz
802 11b: -87 dBm @ 11 Mbps (Typical)
802 11g: -77 dBm @ 54 Mbps (Typical)
802 11n: 20 MHz: -70 dBm @ MCS23 (Typical)
802 11n: 40 MHz: -66 dBm @ MCS23 (Typical)
5 GHz
802 11a: -74 dBm @ 54 Mbps (Typical)
802 11n: 20 MHz: -67 dBm @ MCS23 (Typical)
802 11n: 40 MHz: -64 dBm @ MCS23 (Typical)
Antenna Gain in dBi
2 4 GHz (3 internal PIFA antennas)
PIFA 1 ≤ 3 31 dBi (Right)
PIFA 2 ≤ 3 45 dBi (Front)
PIFA 3 ≤ 1 96 dBi (Left)
5 GHz (3 internal PIFA antennas)
PIFA 1 ≤ 3 71 dBi (Right)
PIFA 2 ≤ 3 60 dBi (Front)
PIFA 3 ≤ 4 27 dBi (Left)
NOTES
For regulatory, warranty, and safety information, see the CD that
came with your router or go to Linksys.com/support
Specifications are subject to change without notice
Maximum performance derived from IEEE Standard 802 11
specifications Actual performance can vary, including lower
wireless network capacity, data throughput rate, range and
coverage Performance depends on many factors, conditions and
variables, including distance from the access point, volume of
network traffic, building materials and construction, operating
system used, mix of wireless products used, interference and other
adverse conditions
21
Visit linksys.com/support for award-winning 24/7 technical support
Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries
A listing of Cisco’s trademarks can be found at www cisco com/go/trademarks All other trademarks mentioned in this document are the property of their respective owners
© 2011 Cisco and/or its affiliates All rights reserved
3425-01547

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2011:12:07 11:03:36Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2012:01:31 14:03+08:00
Metadata Date                   : 2012:01:31 14:03+08:00
Format                          : application/pdf
Creator                         : VeryPDF
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:8677de92-b7eb-4a40-a404-5bfffb50fc7d
Instance ID                     : uuid:9c7a6daf-ee34-4ff3-88c3-5134bea3b014
Page Count                      : 22
Language                        : en-US
Author                          : VeryPDF

EXIF Metadata provided by EXIF.tools