LINKSYS WPSM54GV11 Wireless-G PrintServer User Manual

LINKSYS LLC Wireless-G PrintServer Book

a href="https://usermanual.wiki/LINKSYS" itemprop="url"> LINKSYS >

Contents

Manual 2

34Chapter 6: Configuring the PrintServer Using the Web-based UtilityThe Printer Tab - Logical PortWireless-G PrintServer with Multifunction Printer SupportThe Printer Tab - Logical PortThe Logical Printers tab contains the logical printer settings of the PrintServer. Configure them for each Logical Printer.The PrintServer has three logical or virtual printer ports. For example, you can have three different configurations for your USB printer: Logical Printer 1 for landscape orientation, Logical Printer 2 for double-sided copies, and Logical Printer 3 for manual feed. Then you will map Logical Printers 1, 2, and 3 to the physical printer on the PrintServer’s USB port.Select PrinterLogical Printer No. From the Logical Printer Port No: drop-down menu, select the number (1-3) of the printer you wish to configure. Click the Get Data button to update the display with the current data for the selected logical printer.DetailsPre-string (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer before each print job. This string cannot exceed 30 characters.Post String (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer after each print job. This string cannot exceed 30 characters.Convert LF to CR+LF. If checked, LF (line feed) characters are changed to CR+LF (carriage return + line feed). Click the Save button to apply your changes, or click Cancel to cancel your changes.Figure 6-10: Printer - Logical Port
35Chapter 6: Configuring the PrintServer Using the Web-based UtilityThe Status Tab - DeviceWireless-G PrintServer with Multifunction Printer SupportThe Status Tab - DeviceThe Device tab allows you to view information about the PrintServer.Server DetailsThe PrintServer’s settings and status information are displayed here. No values can be changed on this screen. This screen is for information only.Upgrade. If you want to upgrade the PrintServer’s firmware, follow these instructions:1. Visit www.linksys.com and download the firmware upgrade file for the Wireless-G PrintServer. 2. Extract the file on your computer. 3. On the Device screen, click the Upgrade button.4. On the Firmware Upgrade screen, enter the location of the extracted firmware file, or click the Browse button to find this file.5. Click the Start Upgrade button, and follow the on-screen instructions.On the Device screen, click the Refresh button to retrieve this information again.Figure 6-11: Status Tab - Devicedownload: to receive a file transmitted over a networkfirmware: the programming code that runs a networking deviceupgrade: to replace existing software or firmware with a newer versionFigure 6-12: Firmware Upgrade
Download:
Mirror Download [FCC.gov]
Document ID815167
Application IDBZ2PWoeYKAj0T4V3DPTMew==
Document DescriptionManual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize78.39kB (979833 bits)
Date Submitted2007-07-12 00:00:00
Date Available2007-07-12 00:00:00
Creation Date2007-07-11 16:50:21
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2007-07-11 16:50:30
Document TitleBook Template.book
Document CreatorFrameMaker 7.0
Document Author: junelee
FCC ID Filing: Q87-WPSM54GV11

Navigation menu