LINKSYS WRT54GRV11 Wireless-G Broadband Router with RangeBooster User Manual

LINKSYS LLC Wireless-G Broadband Router with RangeBooster Book

a href="https://usermanual.wiki/LINKSYS" itemprop="url"> LINKSYS >

Contents

Manual 2

35Chapter 6: Configuring the Wireless-G Broadband Router with RangeBoosterThe Administration Tab - Factory DefaultsWireless-G Broadband Router with RangeBoosterThe Administration Tab - Factory DefaultsClick the Restore Factory Defaults button to reset all configuration settings to their default values. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by default.The Administration Tab - Firmware UpgradeDo not upgrade your firmware unless you are experiencing problems with the Router. For more information about upgrading firmware, refer to “Appendix C: Upgrading Firmware”.Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website, www.linksys.com. Then extract the file.Please select a file to upgrade. In the field provided, enter the name of the extracted firmware upgrade file, or click the Browse button to find this file.Start to Upgrade. After you have selected the appropriate file, click this button, and follow the on-screen instructions.Help information is shown on the right-hand side of the screen.Figure 5-45: Administration Tab - Factory DefaultsFigure 5-46: Administration Tab - Firmware UpgradeNote: The Router will lose all of the settings you have customized. Before you upgrade its firmware, write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all of your configuration settings.
36Chapter 6: Configuring the Wireless-G Broadband Router with RangeBoosterThe Status Tab - RouterWireless-G Broadband Router with RangeBoosterThe Status Tab - RouterThe Router screen on the Status Tab displays the Router’s current status.Router InformationFirmware Version. This is the Router’s current firmware.Current Time. This shows the time, as you set on the Setup Tab.Internet MAC Address. This is the Router’s MAC Address, as seen by your ISP.Host Name. If required by your ISP, this would have been entered on the Setup Tab.Domain Name. If required by your ISP, this would have been entered on the Setup Tab.Internet ConnectionConnection Type. This indicates the type of Internet connection you are using. If your Router has a PPPoE Internet connection, the PPPoE IP Connection screen will be displayed, which allows you to disconnect the connection.Internet IP Address. The Router’s Internet IP Address is displayed here.Subnet Mask and Default Gateway. The Router’s Subnet Mask and Default Gateway address are displayed here for DHCP and static IP connections.DNS1-3. Shown here are the DNS (Domain Name System) IP addresses currently used by the Router.MTU. MTU is the Maximum Transmission Unit. It specifies the largest packet size permitted for Internet transmission. The default setting, Manual, allows you to enter the largest packet size that will be transmitted. You should leave this value in the 1200 to 1500 range. To have the Router select the best MTU for your Internet connection, select Auto.IP Address Release. Available for a DHCP connection, click this button to release the current IP address of the device connected to the Router’s Internet port.IP Address Renew. Available for a DHCP connection, click this button to replace the current IP address—of the device connected to the Router’s Internet port—with a new IP address.Figure 5-47: Status Tab - RouterFigure 5-48: Status Tab - Router with PPPoE IP Connection
Download:
Mirror Download [FCC.gov]
Document ID648276
Application IDJuT9fw4Le36tJT91Vlh4yA==
Document DescriptionManual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize175.89kB (2198619 bits)
Date Submitted2006-04-18 00:00:00
Date Available2006-04-18 00:00:00
Creation Date2006-04-18 08:57:23
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2006-04-18 08:59:44
Document TitleBook Template.book
Document CreatorFrameMaker 7.0
Document Author: bewalter
FCC ID Filing: Q87-WRT54GRV11

Navigation menu