LINKSYS WRT54GV82 Wireless-G Broadband Router With 4-Port Switch User Manual

LINKSYS LLC Wireless-G Broadband Router With 4-Port Switch

a href="https://usermanual.wiki/LINKSYS" itemprop="url"> LINKSYS >

Users manual3

Chapter 3 Advanced Configuration21Wireless-G Broadband RouterStatus > WirelessThe Status > Wireless screen displays the status of your wireless network.Status > WirelessWirelessMAC Address This is the Router’s MAC Address, as seen on your local, wireless network.Mode As selected from the Wireless > Basic Wireless Settings screen, this displays the wireless mode (Mixed, G-Only, or Disabled) used by the network.SSID As entered on the Wireless > Basic Wireless Settings screen, this displays the wireless network name or SSID.DHCP Server The status of the DHCP server function is displayed here.Channel As entered on the Wireless > Basic Wireless Settings screen, this displays the channel on which your wireless network is broadcasting.Encryption Function As selected on the Wireless > Wireless Security screen, this displays the status of the Router’s wireless security.Click Refresh to update the on-screen information.
Appendix A Troubleshooting22Wireless-G Broadband RouterAppendix A: TroubleshootingYour computer cannot connect to the Internet. Follow these instructions until your computer can connect to the Internet:Make sure that the Router is powered on. The Power LED should be green and not flashing.If the Power LED is flashing, then power off all of your network devices, including the modem, Router, and computers. Then power on each device in the following order:Cable or DSL modemRouterComputerCheck the cable connections. The computer should be connected to one of the ports numbered 1-4 on the Router, and the modem must be connected to the Internet port on the Router.The modem does not have an Ethernet port.The modem is a dial-up modem for traditional dial-up service. To use the Router, you need a cable/DSL modem and high-speed Internet connection.You cannot use the DSL service to connect manually to the Internet.After you have installed the Router, it will automatically connect to your Internet Service Provider (ISP), so you no longer need to connect manually.The DSL telephone line does not t into the Router’s Internet port.The Router does not replace your modem. You still need your DSL modem in order to use the Router. Connect the telephone line to the DSL modem, insert the setup CD into your computer, and then follow the on-screen instructions.••1.2.3.•When you double-click the web browser, you are prompted for a username and password. If you want to get rid of the prompt, follow these instructions.Launch the web browser and perform the following steps (these steps are specific to Internet Explorer but are similar for other browsers):Select Tools > Internet Options. Click the Connections tab.Select Never dial a connection. Click OK.The Router does not have a coaxial port for the cable connection.The Router does not replace your modem. You still need your cable modem in order to use the Router. Connect your cable connection to the cable modem, insert the setup CD into your computer, and then follow the on-screen instructions.The computer cannot connect wirelessly to the network.Make sure the wireless network name or SSID is the same on both the computer and the Router. If you have enabled wireless security, then make sure the same security method and key are used by both the computer and the Router.You need to modify the settings on the Router.Open the web browser (for example, Internet Explorer or Firefox), and enter the Router’s IP address in the address field (the default IP address is 192.168.1.1). When prompted, leave the User name field blank and enter the password to the Router (the default is admin). Click the appropriate tab to change the settings.WEB: If your questions are not addressed here, refer to the Linksys website, www.linksys.com.1.2.3.4.
Download:
Mirror Download [FCC.gov]
Document ID865303
Application IDkzcCSN0eML96eZOqSfqwyg==
Document DescriptionUsers manual3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize98.7kB (1233735 bits)
Date Submitted2007-11-07 00:00:00
Date Available2007-11-07 00:00:00
Creation Date2007-11-01 21:06:56
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2007-11-01 21:07:00
Document TitleUsers manual3
Document CreatorAdobe InDesign CS2 (4.0.3)
FCC ID Filing: Q87-WRT54GV82

Navigation menu