LINKSYS WUSB11V4 Wireless USB Network Adapter User Manual

LINKSYS LLC Wireless USB Network Adapter Book

a href="https://usermanual.wiki/LINKSYS" itemprop="url"> LINKSYS >

Contents

Part 2

15Chapter 6: Driver Installation and Configuration for Windows XPWireless-B USB Network AdapterChapter 6: Driver Installation and Configuration for Windows XPAfter connecting the Adapter to your computer, you will install the driver and configure the Adapter.1. Windows XP will automatically detect the Adapter. Insert the Setup CD-ROM into your CD-ROM drive. Click the radio button next to Install the software automatically (Recommended). Then click the Next button.2. When Windows has finished installing the driver, click the Finish button.You have now completed the driver installation for the Wireless-B USB Network Adapter. To configure the Adapter, proceed to the next section, “Windows XP Wireless Zero Configuration.” IMPORTANT: Do NOT run the Wireless-B USB Network Adapter Setup Wizard. If the Setup Wizard runs automatically after the Setup CD-ROM has been inserted, click the Exit button.Figure 6-1: Install Software AutomaticallyFigure 6-2: wizard Finished
16Chapter 6: Driver Installation and Configuration for Windows XPWindows XP Wireless Zero ConfigurationWireless-B USB Network AdapterWindows XP Wireless Zero Configuration1. After installing the Adapter, the Windows XP Wireless Zero Configuration icon will appear in your computer’s system tray. Double-click the icon. 2. The screen that appears will show any available wireless network. Select the network you want. If this network has WEP encryption enabled, go to step 3.If this network does not have WEP encryption enabled, make sure the box next to Allow me to connect to the selected wireless network, even though it is not secure is checked. Then click the Connect button, and go to step 4.encryption: encoding data transmitted in a network. NOTE: Windows XP has a built-in configuration tool. Use Windows XP Wireless Zero Configuration (in the system tray at the bottom of your screen) to configure the Adapter.NOTE: Steps 2 and 3 are the instructions and screenshots for Windows XP with Service Pack 1 installed.If you have not installed Service Pack 1, select the network you want, and click the Connect button. If the network has WEP encryption enabled, enter the WEP key in the Network key field, and then click the Connect button.Figure 6-3: The Zero Configuration IconFigure 6-4: Zero Configuration Connection without WEP
Download:
Mirror Download [FCC.gov]
Document ID429485
Application IDiifFur/fHx67kFU6b4zeqQ==
Document DescriptionPart 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize251.46kB (3143291 bits)
Date Submitted2004-06-09 00:00:00
Date Available2004-05-14 00:00:00
Creation Date2004-05-14 19:25:40
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2004-05-14 19:26:07
Document TitleBook Template.book
Document CreatorFrameMaker 7.0
Document Author: kenl
FCC ID Filing: Q87-WUSB11V4

Navigation menu