Landis Gyr Technology NG1R1S1 NIC AM User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	3838113
Application ID	HxAQDB9pVdt+HM4VchbQ2g==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.17kB (589583 bits)
Date Submitted	2018-05-03 00:00:00
Date Available	2018-05-03 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Foxit PhantomPDF Printer Version 7.3.4.0308
Document Lastmod	2018-05-03 09:49:59
Document Title	Manual

Certification Exhibit
FCC ID: R7PNG1R1S1
IC: 5294A-NG1R1S1
FCC Rule Part: 15.247
ISED Canada Radio Standards Specification: RSS-247
Project Number: 72127440
Manufacturer: Landis+Gyr Technology, Inc.
Model: NIC AM
Manual
5015 B.U. Bowman Drive Buford, GA 30518 USA
Review Draft 5/2/2018
Landis+Gyr
Network Bridge
N2200/N2250
Data Sheet
Publication: 98-1822 Rev AA
LANDIS+GYR CONFIDENTIAL INFORMATION
Review Draft 5/2/2018
Limitation on Warranties and Liability
Information in this document is subject to change without notice. This manual or any part of it thereof may not
be reproduced in any form unless permitted by contract or by written permission of Landis+Gyr.
In no event will Landis+Gyr be liable for any incidental, indirect, special, or consequential damages (including
lost profits) arising out of or relating to this publication or the information contained in it, even if Landis+Gyr
has been advised, knew, or should have known of the possibility of such damages.
© 2018 Landis+Gyr, Inc. All Rights Reserved
Covered by both issued and pending patents.
For further patent information see: https://www.landisgyr.com/about/patent-notices/
Landis+Gyr Network Bridge N2200/N2250 Data Sheet
Publication: 98-1822 Rev AA
Revision History
Modification Date
Revision
Description
Author
AA
In Progress
Vicky Costello
© 2018 Landis+Gyr • All rights reserved
Contact Us:
Landis+Gyr technical support:
1-888-390-5733
solutionsupport.na@landisgyr.com
To provide feedback about this documentation, contact the Technical Documentation team at:
ustechnicaldocumentation@landisgyr.com.
Review Draft 5/2/2018
Network Bridge
N2200 (RF Mesh)/N2250 (RF Mesh IP)
Data Sheet
Product Overview
The Landis+Gyr Network Bridge provides the basis for a powerful RF wireless mesh
network for remote data collection and end device monitoring and control. The Network
Bridge supports full two-way peer-to-peer communication to all devices within the network.
The product offers advanced functionality, such as individual message prioritization,
additional memory for localized intelligence, and it is based on the Linux operating system.
The N2200 (RF Mesh)/N2250 (RF Mesh IP) provides interface and control to distribution
equipment and critical devices that require low latency.
Figure 1 - 1. N2200/N2250 Network Bridge
In addition to the standard RF Mesh and RF Mesh IP radios, the N2200/N2250 has one
internal slot that can be fitted with LTE wireless or other future WAN technologies. The
N2200/N2250 comes equipped with two serial, two Ethernet ports and WiFi for configuration. Landis+Gyr's Network Bridge/Network Gateway Platform offers a family of Field Area
Data Sheet
98-1822 Rev AA
Review Draft 5/2/2018
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
Landis+Gyr
Network Devices that can be configured and deployed to build a robust communication network infrastructure enabling communication to edge devices in the field.
Dimensions
Figure 1 - 2. Network Bridge Physical Dimensions
98-1822 Rev AA
Data Sheet
Review Draft 5/2/2018
Landis+Gyr
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
N2200/N2250 Specifications
Product Specifications
Table 1 lists the general product specifications for the N2200 (RF Mesh)/N2250 (RF Mesh
IP) Network Bridge Series.
Table 1. Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP)
Product Specifications
Element
Description
Electrical (General)
Input Voltage Range
12-24 VDC +/- 20% (9.6-28.8 VDC)
Current
1.39A-0.45A
Processing Unit
CPU
Cortex A5
Clock Speed
536 MHz
RAM Memory
512 Mbytes DDR2 RAM
FLASH Memory
2 GB NAND
Bridge Radio Processing Unit
CPU
Dual-core Cortex M4, AMTEL SAM4C32A
Clock Speed
120 MHz
RAM Memory
304 Kbytes
FLASH Memory
2 MB + 4MB External
ROM Memory
8 Kbytes
LAN Packet Port
Serial Interface
RS-232C/RS-485; RJ45; 1200 to 115,200 bps
Protocol
Gridstream LAN Packet Protocol
Parity
None
Data Bits
Stop Bits
Duplex
Full
Transparent Port
Data Sheet
Serial Interface
RS-232C/RS-485; RJ45; 1200 to 115,200 bps
Protocol
Any Asynchronous Byte-Oriented Protocol
Parity
None
Data Bits
7 or 8
Stop Bits
1 or 2
Duplex
Full
98-1822 Rev AA
Review Draft 5/2/2018
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
Landis+Gyr
Table 1. Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP)
Product Specifications (Continued)
Element
Description
Ethernet
ETH 0
10/100/1000 Ethernet
ETH 1
10/100 Ethernet
WIFI
Manufacturer
Redpine Signals
Model
RS9113 n-Link™
Manufacturer Part Number
RS9113-NBZ-D3N
LTE Cat6 (US Only-ATT and Verizon)
Manufacturer
Sierra Wireless
Model
MC Series
Manufacturer Part Number
MC7455
Mechanical
Enclosure
Black Anodized Aluminum, IP41
Dimensions
55.20mm W X 120.00mm D X 112.10mm H
Weight
1.10 lbs
Operating Temperature Range
-40°C to 60°C
Storage Temperature Range
-40°C to 85° C
Limited Lifetime
Life
20 years
98-1822 Rev AA
Data Sheet
Review Draft 5/2/2018
Landis+Gyr
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
Radio Specifications Americas
Table 2 lists the radio specifications for the N2200 (RF Mesh)/N2250 (RF Mesh IP) Network
Bridge Series for Americas.
Table 2. Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP)
Radio Specifications Americas
Element
Description
Radio (General)
Radio Model
Model: NIC AM
Communication Protocol (PHY)
IEEE 802.15.4-2015 - SUN FSK PHY
North America: 902-928 MHz
RF Frequency Range
Brazil: 902-907.5, 915-928 MHz
N2250 (RF Mesh IP): 200, 400 KHz
Channel Spacing
N2200 (RF Mesh): 100, 300 KHz
N2250 (RF Mesh IP): 50, 150, 200 Kbps
RF Data Rate
N2200 (RF Mesh): 9.6, 19.2, 38.4, 115.2 Kbps
Receiver
-106 dBm(50 Kbps)
Sensitivity (at 10% packet error rate)
-101 dBm(150 Kbps)
-98 dBm(200 Kbps)
Adjacent Channel Rejection
35 dB Typical
Alternate Channel Rejection
50 dB Typical
Transmitter
Output Power (at Antenna Connector)
50 mW to 1W
Modulation Type
2FSK
Out-of-band Spurious Emissions
<-70 dBc
Antenna Requirements
Data Sheet
Type
Vertically polarized, omnidirectional
Gain
< 5.5 dBi
Connector
N Connector, Female
98-1822 Rev AA
Review Draft 5/2/2018
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
Landis+Gyr
Radio Specifications India
Table 3 lists the radio specifications for the N2200 (RF Mesh)/N2250 (RF Mesh IP) Network
Bridge Series for India.
Table 3. Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP)
Radio Specifications India
Element
Description
Radio (General)
Radio Model
Model: NIC IN
Communication Protocol (PHY)
IEEE 802.15.4-2015 - SUN FSK PHY
RF Frequency Range
865-867 MHz
N2250 (RF Mesh IP): 200 KHz
Channel Spacing
N2200 (RF Mesh): 100 KHz
N2250 (RF Mesh IP): 50, 100, 150 Kbps
RF Data Rate
N2200 (RF Mesh): 9.6, 19.2, 38.4 Kbps
Receiver
-106 dBm (50 Kbps)
Sensitivity (at 10% packet error rate)
-101 dBm (150 Kbps)
-98 dBm (200 Kbps)
Adjacent Channel Rejection
35 dB Typical (50 Kbps)
Alternate Channel Rejection
50 dB Typical (50 Kbps)
Transmitter
Output Power (at Antenna Connector)
50 mW to 1W
Modulation Type
2FSK
Out-of-band Spurious Emissions
>70 dBc
Antenna Requirements
Type
Vertically polarized, omnidirectional
Gain
< 5.5 dBi
Connector
N Connector, Female
98-1822 Rev AA
Data Sheet
Review Draft 5/2/2018
Landis+Gyr
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
Regulatory Compliance
FCC Compliance
FCC Class B
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the Instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Consult Landis+Gyr or an experienced radio technician for help
WARNING: Changes or modifications to this device not expressly approved by
Landis+Gyr could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC and ISED radiation exposure limits. This equipment
should be installed and operated with a minimum distance of 28 cm between the radiator
and your body. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Cet équipement est conforme aux limites FCC/IC d'exposition aux radiations définies pour
un environnement non contrôlé.
Cet équipement doit être installé et utilisé à une distance minimale de 28cm entre le radiateur et votre corps.
Cet émetteur ne doit pas être co-implantés ou exploités en conjonction avec une autre
antenne ou émetteur.
Data Sheet
98-1822 Rev AA
Review Draft 5/2/2018
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
Landis+Gyr
EIRP Limit
The equipment meets the required FCC specifications with any customer-selectable RF
power setting of the radio, using the antennas indicated in this document. FCC testing was
conducted using an omnidirectional whip antenna with a gain of 5 dBi. Omnidirectional whip
antennas with higher gain may result in EIRP levels in excess of the FCC limit.
Antennas of a type other than omnidirectional whip are not FCC approved for this device.

NOTE: If you increase the power from the factory settings, this can cause communication problems
for other radios in the network.
FCC ID Labels
FCC ID Label contents are shown in Figure 2 and Figure 3.
Figure 2. FCC ID Label (RF Mesh)
10
98-1822 Rev AA
Data Sheet
Review Draft 5/2/2018
Landis+Gyr
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
Figure 3. FCC ID Label (RF Mesh IP)
Requirement for Hosting Certified Radios
The following radio modules are approved for use in the Bridge.
•
NIC
•
Cell Modems
•
WiFi
Transmitters that are added to the Bridge require testing to be approved.
•
If the transmitters are added by the customer, the customer is responsible for this
testing.
•
If Landis+Gyr adds these modules, the testing will be performed, and they will be
added to the list of approved modules.
Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device. Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed
below with the maximum permissible gain and required antenna impedance for each
Data Sheet
98-1822 Rev AA
11
Review Draft 5/2/2018
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
Landis+Gyr
antenna type indicated. Antenna types not included in this list, having a gain greater than
the maximum gain indicated for that type, are strictly prohibited for use with this device.
This radio transmitter (5294A-NG1R1S1) has been approved by Industry Canada.
Approved Antenna: Omni-directional antenna, 5.5 dBi gain, 902-928 MHz, antenna impedance is 50 ohms.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de
sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son
numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie
Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain
admissible maximal et l'impédance requise pour chaque type d'antenne. Les types
d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal
indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Brazil
Anatel
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
Regulatory Compliance India
WPC Guidelines
This device complies with WPC guidelines. This device complies with Part 15 of the FCC
rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
12
98-1822 Rev AA
Data Sheet
Review Draft 5/2/2018
Landis+Gyr
Network Bridge N2200 (RF Mesh)/N2250 (RF Mesh IP) Data Sheet
Safety Information
California Hazard Identification
Data Sheet
WARNING: This product contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm.
98-1822 Rev AA
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 14
Language                        : en-US
Tagged PDF                      : Yes
Has XFA                         : No
Producer                        : Foxit PhantomPDF Printer Version 7.3.4.0308
Author                          : 
Creator                         : 
Subject                         : 
Title                           : 
Modify Date                     : 2018:05:03 09:49:59-05:00

EXIF Metadata provided by EXIF.tools