Leedarson Lighting 7HPLWA1 Wifi Smart Plug User Manual 1

LEEDARSON LIGHTING CO., LTD. Wifi Smart Plug 1

Contents

User Manual -1

Use and Care Guide
Wi-Fi Smart Plug
1 Safety information
WARNING:
• For indoor use only. Do not use in wet locations.
• The total current limit of the device is 10A. Do not exceed this value!
• If a direct short is created on the output, the Smart Plug will be damaged and no
longer function.
• Do not disassemble the product, or make repairs yourself. You run the risk of electric
shock and voiding the limited warranty. If you need service, please contact us.
2 Package Contents
Wi-Fi Smart Plug *1
Quick start guide*1
3 Product Description
LED Indicator: Under normal working state, Green—on, Red—off.
Icon
Status
Behavior
Slow Breathing Green
Plug initiated, is ready to start plug network configuration
Quick Blinking Green
Connecting to the network
or disconnected from a Wi-Fi network
Solid Green
Connected to the network and plug is turned on
Slow Blinking Orange
Factory reset or firmware OTA
Red
The Smart plug is Switched off
Specification
Max Load
NA Plug: 120V~,60Hz,Max 10A
Operating Temperature
0℃~40℃
Operating Humidity
10 -90%RH, Non-condensing
Certification
FCC ID,UL
4 Installation and Operation
1. Get the Arnoo app for Android or iOS from Google Play or Apple Store.
OR Scan QR Code to download App。
2. Open the app, and it will walk you through creating an account and login to the
home screen.
3. Add the Plug
A Connect your smartphone to a 2.4GHz Wi-Fi network.
B Connect the smart plug to a grounded wall socket，the LED indicator will slowly
blinking， if not please Press and hold the power key for 5S to reset.
C Follow the guide in app to connect the smart plug to Wi-Fi router. ( Go to your
smartphone Setting→WLAN, find SmartPlug-xxxx to start plug network setting.)
D Once plug connected to network successfully, the LED indicator change to solid
green.
5 Function
5.1 Remote Control: Turn your electronic device on and off from anywhere using the
mobile app.
5.2 Schedule: Set specific times for your device to turn on/off as setting connected
lighting turn on at 19:00 every Monday. Or like setting lights to come on at dusk or turn
off at sunrise.
5.3 Timer: set a countdown timer to have plug turn off automatically. As setting after
30 minutes turn off automatically.
5.4 Flexibility: Slim design fits with standard wall outlet and leaves the second outlet
free.
5.5 Energy Monitor: Measures the energy consumption of the connected device.(Optional Some
Smart Plug not support )
6 Trouble shooting
1. Q: What devices can I control with the Smart Plug?
A: You can control lights, fans, humidifiers, portable heaters, and any small appliances
in accordance with the Smart Plug’s specifications.
2. Q: What can i do, if the smart plug network configuration process has failed, LED
indicator always is blinking Green.
A: Check for interference or relocate the Smart Plug to another location within the signal
range.
Make sure that you connected the Smart Plug to the 2.4GHz network.
Repeat the plug network configuration process (AP mode configuration recommend)
Factory reset the Smart Plug and try to add it again
3. Q: How to factory reset the smart plug.
A: Press and hold the power key 10s until the Led indicator blinks green slowly.
FCC Statement
1.This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Note: The grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
of 20 cm between the radiator and your body.
conditions:
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
IC 20cm RF
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
of 20 cm between the radiator and your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements de la IC é
tablies pour un environnement non contrôé. Cet équipement doit être installé et
fonctionner à au moins 20 cm de distance d’un radiateur ou de votre corps.

Navigation menu