LibreStream Technologies MCD2500 Rugged Mobile Collaboration Device User Manual 400151 00 revB
LibreStream Technologies Inc. Rugged Mobile Collaboration Device 400151 00 revB
Contents
- 1. User Manual Notices
- 2. User Manual
User Manual Notices
Re
g
ulator
y
and Safet
y
Guide:
Onsi
g
ht 2500
Another Innovation by Librestream
Librestream Onsight 2500 Regulatory and Safety Guide
i
Table of Contents
1. Scope ............................................................................................................... 1
2. General Safety Information ............................................................................ 1
2.1. Battery........................................................................................................... 1
2.2. Battery Disposal ............................................................................................ 2
2.3. Safety Notice................................................................................................. 2
2.4. AC Adapter Information................................................................................. 2
2.5. FCC RF Exposure Notice.............................................................................. 3
2.6. Industry Canada RF Notice ........................................................................... 3
3. CE Declaration of Conformity........................................................................ 4
4. France - Outdoor Configuration .................................................................... 6
5. Immunity for Industrial Environments .......................................................... 7
6. Radiated Emissions........................................................................................ 7
6.1. FCC Class B Notice ...................................................................................... 7
6.2. Industry Canada Class B Notice ................................................................... 7
7. Hazardous Location Operation...................................................................... 8
8. Medical Grade Device (Canada Class 1) ..................................................... 11
8.1. Intended operation ...................................................................................... 11
8.2. Instructions for use...................................................................................... 11
8.3. Device Safety Notice ................................................................................... 12
8.4. Adapter Information..................................................................................... 12
8.5. RF Exposure Notice .................................................................................... 13
9. Australia/New Zealand.................................................................................. 17
10. Japan ............................................................................................................. 17
11. Taiwan............................................................................................................ 17
12. WEE Information........................................................................................... 17
Librestream Contact Information ........................................................................... 19
Librestream Onsight 2500 Regulatory and Safety Guide
1
1. Scope
This manual applies to the following models. References to MCD2500 in this manual,
apply to all the listed models below.
MCD2500
MCD2500n
2. General Safety Information
Do not attempt to service or dismantle this equipment. All repairs must be done by
an authorized Librestream service depot.
Contact support for an authorized Librestream service depot.
Do not block or insert objects into any openings in the equipment. Doing so may
damage internal components and may cause fire or shock hazards.
Carefully read the Librestream Quick Start Guide and the User manual before
operating the Onsight 2500, paying special attention to “Operating Environment” in
section 10.
Use only a Librestream-supplied power adapter with the equipment. Use of other
adapters may cause fire or explosion hazards.
Operate the external power adapter in a well ventilated area. Do not cover the
power adapter with papers or any other items as the adapter may become hot.
This symbol appears within this manual, as well as the User
Manual, Quick Start Guide, and on the product label. The symbol
means “Attention, consult ACCOMPANYING DOCUMENTS”.
This is a critical symbol and the user must refer to the
accompanying documents.
2.1. Battery
CAUTION! RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE OR INSTALLED INCORRECTLY.
Observe the correct polarity when changing the lithium battery. Install battery
according to the manufacturer’s product documentation.
Replace battery only with the same type as recommended by the manufacturer
Dispose of used batteries according to the manufacturer’s product documentation
and local disposal requirements
Use only Librestream-supplied batteries with the Onsight 2500. Use of other types
may increase the risk of fire or explosion or damage to the equipment.
Librestream Onsight 2500 Regulatory and Safety Guide
2
Do not store the battery in places where metallic objects may come in contact with
the battery terminals (e.g. in a pocket with keys, in a drawer with paper clips, etc.).
The resulting short-circuit can cause extremely high temperatures that may
damage the battery and cause burns or fires.
Do not attempt to disassemble the battery. The battery poses a burn hazard if
handled improperly. Immediately dispose of a damaged or leaking battery.
Do not store or leave the Onsight 2500 or Onsight 2500 battery near a heat source
(e.g. radiator, stove, heater, automobile dashboard, etc.) as the battery may
explode or ignite.
2.2. Battery Disposal
The Onsight 2500 uses a Lithium-Ion battery and must be disposed of properly:
The battery must not be disposed with household or office waste.
Do not dispose of the battery in a fire as the battery may explode.
Contact your local waste disposal agency for the address of the nearest battery
disposal location.
2.3. Safety Notice
The Onsight 2500 mobile streaming camera (Model MCD2500) was evaluated to IEC
60950-1:2001, EN60950-1:2001, UL 60950-1:2003 and CSA C22.2 60950-1:2003
standards and found to be in compliance with the standard requirements.
U8 09 09 61052 011
2.4. AC Adapter Information
This device is supplied with an AC Adapter for charging the battery and powering the
Onsight 2500. The following labels identify the international safety approvals for the
AC Adapter.
Librestream Onsight 2500 Regulatory and Safety Guide
3
2.5. FCC RF Exposure Notice
For body worn operation, this product has been tested and meets RF exposure
guidelines when used with an accessory that contains no metal. Use of other
accessories may not ensure compliance with RF exposure guidelines. No metallic
accessories should be used with this device and multiple devices should not be co-
located at a distance of less than 20 cm.
Warning: Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate this equipment.
2.6. Industry Canada RF Notice
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur)
approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de
brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type
d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
Librestream Onsight 2500 Regulatory and Safety Guide
4
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
License Exempt Radio Apparatus / Appareils radio exempts de licence
The device for operation in the band 5150-5250 MHz is only for indoor use ONLY,
this restriction is to reduce the potential for harmful interference to co-channel mobile
satellite systems.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable
aux systèmes de satellites mobiles utilisant les mêmes canaux.
High-power radars are allocated as primary users (i.e. priority users) of the bands
5250-5350 MHz and 5650-5850 MHz and these radars could cause interference
and/or damage to LE-LAN devices.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux
(c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et
ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-
EL.
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall complies with the e.i.r.p. limit.
Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350
MHz et 5470-5725 MHz conforme à la limite de p.i.r.e.
The maximum antenna gain permitted for devices in the band 5725-5825 MHz
complies with the e.i.r.p. limits specified for point-to point and non point-to-point
operation as appropriate.
Le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825
MHz) conforme à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non
point à point, selon le cas.
3. CE Declaration of Conformity
CE Declaration of Conformity (DOC) is shown on following page. The signed copy of
the Declaration of conformity is available; please contact Librestream customer
support if you require a signed copy.
Librestream Onsight 2500 Regulatory and Safety Guide
5
Declaration of Conformity
(According to ISO/IEC Guide 22 and EN 45014)
Manufacturer’s Name: Librestream Technologies Inc.
Manufacturer’s Address: 895 Waverly St., Suite 110
Winnipeg, MB R3T 5P4
Canada
declares, that the product:
Product Name: Onsight 2500R / Onsight 2500Ex
Model Number(s): MCD2500
to which this declaration relates, meets the essential health and safety requirements and is in
conformity with the relevant EU Directives listed below:
R&TTE 1999/5/EC
EU EMC Directive 2004/108/EC
EU Low Voltage Directive 2006/95/EC
ATEX Directive 94/9/EC (Onsight 2500Ex only)
using the relevant section of the following EU standards and other normative documents:
EMC: EN 55011, EN61000-6-2
EN 61000-3-2, EN 61000-3-3
ETSI EN 300 328,
ETSI EN 301 489,
EN 50360
Safety: EN/IEC 60950-1
Explosive Atmospheres: EN 60079-0, EN 60079-15 (Onsight 2500Ex only)
European National Restrictions / Restrictions Européen
France :
L'utilisation de cet équipement (avec 2.4GHz Wireless LAN) est soumise a certaines restrictions: Cet
équipement peut être utilisé à l'intérieur d'un bâtiment en utilisant toutes les fréquences entre 2400 a
2483.5MHz (Chaîne 1-13). Pour l’utilisation en environnement extérieur, toutes fréquences entre 2454-
2483.5MHz doivent être désactivés. Voyer les instructions inclus pour configuration extérieure de cet
équipement. Pour les dernières restrictions, voir http://www.art-telecom.fr
For 2.4 GHz Wireless LAN operation of this product, certain restrictions apply: This equipment may be
used indoor for the entire 2400-2483.5 MHz frequency band (channels 1-13). For outdoor use, the
frequency band from 2454-2483.5 MHz must be disabled. Please see included instructions on how to
configure the product for outdoor use in France. For the latest restrictions, see http://www.art-telecom.fr
Place of Issue: Winnipeg MB. Canada Date of Issue: January 12th, 2010
Note: The Original DoC is signed
Librestream Onsight 2500 Regulatory and Safety Guide
6
4. France - Outdoor Configuration
1. Starting from the default Viewfinder display, press the Display button three
times to display the Main Menu.
2. From the Main menu, tap the Configuration menu option to display a
Configuration window.
3. From the Configuration window, select the Radio Tab.
4. Select the Checkbox “France – Outdoor Use”, and click Accept. If Accept is not
clicked the settings will not take affect.
Librestream Onsight 2500 Regulatory and Safety Guide
7
5. Immunity for Industrial Environments
This product has been tested and found to comply with EN 61000-6-2: Immunity for
Industrial Environments. When in the presence of high levels of radio-frequency
electromagnetic fields, the user may notice interference within the video content
present on the equipment. If this occurs, the user should re-orient the equipment or
increase the separation between the equipment and the interfering source. If an
external audio headset is being used and is the receiving source of audio
interference, the user may experience improved performance by using a headset
which has been tested and found to comply with EN61000-6-2: Immunity for
Industrial Environments.
6. Radiated Emissions
6.1. FCC Class B Notice
This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These rules are designed to provide
reasonable protection against harmful interference in a residential installation. This
product generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference with
radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If the equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment on
and off, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications that are not expressly approved by the
manufacturer could void the user’s authority to operate this equipment.
6.2. Industry Canada Class B Notice
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de classe B est conforme à la norme NMB-003 du Canada.
Librestream Onsight 2500 Regulatory and Safety Guide
8
7. Hazardous Location Operation MCD2500 (Onsight 2500Ex)
All user documentation and the instructions within this section must be
read and understood before:
Charging the battery;
Operating on AC power;
Insertion or removal of the:
o Battery
o SD card
o Headset
o I/O Cover
o Power Sled
o I/O Sled
Operation with any accessory or peripheral.
The user must review the following information and warnings before using the
MCD2500 within a hazardous environment:
Hazardous Location Ratings:
Please refer to the product label to determine the product’s part number and
hazardous location rating.
MCD2500 devices with part number 200416-01 or 200155-01 have the
following hazardous location ratings:
Class I Division 2, Groups A, B, C, D T5
Class I, Zone 2 AEx nA IIC T5
Class I, Zone 2 Ex nL IIC T5
Ta =-10ºC to +40ºC
MCD2500 devices with part number 200416-02, or 200155-02 have the
following hazardous location ratings:
IECEx FME 08.0008X
Ex nL IIC T5 Gc
Ta =-10ºC to +40ºC
FM08ATEX0077X
II 3 G Ex nL IIC T5
Ta = -10ºC to +40ºC
If you are uncertain about the product’s rating please contact the customer
support department for more information.
Librestream Onsight 2500 Regulatory and Safety Guide
9
Hazardous Location General Information:
The MCD2500 is constructed with a Lexan polycarbonate housing and is overmolded
with a thermoplastic polyurethane elastomer.
Evaluation for material compatibility of the MCD2500 to actual end-user service
conditions is strongly recommended.
WARNINGS
Carefully read all the provided manuals and documentation.
Observe the rated operating and storage environment specifications.
The I/O cover must be installed on the MCD2500 prior to entering the
potentially hazardous environment and it must remain installed at all times
while in the potentially hazardous environment. Ensure that the I/O
connector is clean and free of debris prior to installing the I/O cover. Every
time before entering the hazardous environment, ensure that the I/O cover
is fastened securely to the MCD2500 by hand-tightening the I/O cover’s
retention screws.
The MCD2500 cannot be used with the AC power adapter or I/O sled within
the hazardous environment.
WARNING - DO NOT OPEN BATTERY DOOR WHEN ENERGIZED. The
battery door must be securely closed within the hazardous environment.
WARNING – DO NOT REMOVE OR INSTALL BATTERY IN THE
HAZARDOUS ENVIRONMENT.
WARNING - DO NOT CHARGE IN HAZARDOUS AREA. Battery charging
is not permitted within the hazardous environment.
AC power supply operation is not permitted within the hazardous
environment.
WARNING - DO NOT REMOVE OR INSTALL SD CARD IN HAZARDOUS
AREA. The SD Memory Card Insertion and/or Removal are not permitted
within the hazardous environment.
Inspect the camera before each use. The MCD2500 can not be used within
a hazardous environment if any damage is visible or if the device appears to
not operate correctly.
At no time is the user allowed to use a device that has been disassembled
or assembled by anyone other then an authorized service representative.
Do not attempt to service or dismantle this equipment. Service and
maintenance must be performed by an authorized service center.
Librestream is the only approved authorized service center of MCD2500
devices for hazardous locations. For service please contact:
Librestream
895 Waverley St., Suite 110
Winnipeg, MB. Canada
R3T-5P4
Librestream Onsight 2500 Regulatory and Safety Guide
10
Phone: 1-800-849-5507
Email: support@librestream.com
Accessories in Hazardous Location:
The MCD2500 has been approved to work within the hazardous
environment with an approved headset, SD flash memory card and the built
in battery. All other accessories or peripherals are not allowed in hazardous
locations.
The MCD2500 device shall only be used with the approved Librestream
battery P/N 100229, LiIon, 7.2V nominal, 2400mAH capacity, discharge
duration 2.4hrs@1A. WARNING – DO NOT REMOVE, INSTALL OR
CHARGE BATTERY IN THE HAZARDOUS ENVIRONMENT.
The MCD2500 device shall only be used with an approved headset in
hazardous locations. Please contact customer support for information on an
approved headset for hazardous locations.
The MCD2500 device shall only be used with an approved SD flash
memory card in hazardous locations. Please contact support for information
on an approved SD Memory Card. WARNING - DO NOT REMOVE OR
INSTALL SD CARD IN HAZARDOUS AREA.
Librestream Onsight 2500 Regulatory and Safety Guide
11
8. Medical Grade Device (Canada Class 1)
The Medical Grade Onsight 2500 mobile streaming camera (Model # MCD2500),
complies with UL60601-1:1st edition and CAN/CSA C22.2 601.1-M90 ONLY when
used in conjunction with power supply UE24WCP-120150SPA.
8.1. Intended operation
The Medical Grade Onsight 2500 is intended to be used as a recording and
observation/collaboration tool in applications that are not life threatening in the
Canadian Health Care market.
8.2. Instructions for use
The Medical Grade Onsight 2500 contains intended and unintended radio frequency
(RF) transmitters. Special precautions during installations, and use, according to the
accompanying documentation are mandatory. The Medical Grade Onsight 2500 RF
communications can affect Medical Electrical Equipment if precautions are not
adhered to.
The Medical Grade Onsight 2500 is intended for use by healthcare professionals
only. This device may cause radio interference or may disrupt the operation of
nearby equipment. It may be necessary to take mitigation measures, such as
reorienting or relocating the equipment or shielding the location.
The Medical Grade Onsight 2500 has been tested with the following cables;
1. Eartec Mono Headset PN Monarch LST Rev 3,
2. 1m S-Video Cable,
3. 1m unshielded Cat5e cable,
4. 1m Audio cable (3.5mm plug to 2.5mm plug),
5. Generic USB Mouse.
The use of any cables or accessories other than those specified, with the exception
of accessories and cables qualified and sold by the manufacturer of the equipment
may result in increased emissions or decreased immunity of the equipment and may
cause the device to be non-compliant with the requirements of IEC 60601-1-2:2004
(Ed 2.1).
The Medical Grade Onsight 2500 should not be used adjacent to or
stacked with other equipment. If adjacent or stacked use is necessary,
the equipment should be monitored to verify normal operation in the
configuration in which it will be used.
The Medical Grade Onsight 2500 should not be used as an accessory
to any other device that is not explicitly referenced in the Regulatory or
User manuals.
Librestream Onsight 2500 Regulatory and Safety Guide
12
8.3. Device Safety Notice
The Medical Grade Onsight 2500 mobile streaming camera (Model# Onsight 2500),
complies with UL60601-1:1st edition and CAN/CSA C22.2 601.1-M90 ONLY when
used in conjunction with the power supply model no. UE24WCP-120150SPA.
U8 09 10 61052 012
8.4. Adapter Information
This Medical Grade Onsight 2500 is supplied with an AC Adapter for charging the
battery and powering the device. The following labels identify the North American
medical grade safety approvals that the AC Adapter has been qualified for. Please
note that this supply and Medical Grade Onsight 2500 only have North American
Medical Grade approvals when used in conjunction.
The device is classified as Class II equipment when used with approved power
supply unit; internally powered equipment (Battery Mode).
The degree of protection against electrical shock is not classified since there are no
applied parts.
The device is classified as continuous mode of operation.
The protection against harmful ingress of water is classified as ordinary equipment
IPX0.
The following symbols mean;
1. The power input into the power supply is rated at 100-240V alternating
current at 50/60Hz frequency. The input current is 600mA.
2. The power output of the power supply is 12.0V direct current rated at
1.5A maximum.
3. The device is rated as a Class II device.
Librestream Onsight 2500 Regulatory and Safety Guide
13
8.5. RF Exposure Notice
This Medical Grade Onsight 2500 device intentionally transmits RF energy at 2.4GHz
and 5GHz at up to 65mW for communications. It is recommended this equipment be
kept at a minimum distance of 60cm from all other Medical Electrical Equipment.
See user manual for details of how to turn RF transmit off for non-wireless
configurations.
IEC 60601-1-2:2004(Ed 2.1) Table 202 Requirements
The equipment is intended for use in the electromagnetic environment specified
below. The customer or the user of the equipment should assure that it is used in
such an environment.
Emissions test Compliance
Electromagnetic environment – guidance
RF emissions
CISPR 11 Group 1
When this device is operating in non-wireless
mode the equipment uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11 Class B
Harmonic
emissions IEC
61000-3-2
Class A
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Complies
The equipment is suitable for use in all
establishments including domestic and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
Librestream Onsight 2500 Regulatory and Safety Guide
14
IEC 60601-1-2:2004(Ed 2.1) Table 202 Requirements
The equipment is intended for use in the electromagnetic environment specified
below. The customer or the user of the Equipment should assure that it is used in
such an environment.
Immunity test IEC 60601
test level
Compliance
level
Electromagnetic
environment – guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
±6 kV
contact ±8
kV air
±6 kV contact ±8
kV air with
documented
necessary
Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should be
at least 30 %.
Electrical fast
transient/burst
IEC 61000-4-4
±2 kV for
power
supply lines
±1 kV for
input/output
lines
±2 kV for power
supply lines ±1
kV for
input/output
lines
Mains power quality should
be that of a typical
commercial or hospital
environment.
Surge IEC
610004-5
±1 kV
line(s) to
line(s) ±2
kV line(s) to
earth
±1 kV line(s) to
line(s) ±2 kV
line(s) to earth
Mains power quality should
be that of a typical
commercial or hospital
environment.
Voltage dips,
short
interruptions and
voltage
variations on
power supply
input lines IEC
61000-4-11 UT
= 230 Vac
<5 % UT
(>95 % dip
in UT) for
0,5 cycle 40
% UT (60 %
dip in UT)
for 5 cycles
70 % UT (30
% dip in UT)
for 25 cycles
<5 % UT
(>95 % dip
in UT) for 5
sec
<5 % UT (>95 %
dip in UT) for 0,5
cycle 40 % UT
(60 % dip in UT)
for 5 cycles 70 %
UT (30 % dip in
UT) for 25 cycles
No anomalies
95% dip meets
requirements.
Mains power quality should
be that of a typical
commercial or hospital
environment. If the user of
the equipment requires
continued operation during
power mains interruptions,
it is recommended that the
equipment be powered
from an uninterruptible
power supply or a battery.
Power frequency
(50 Hz) magnetic
field IEC 61000-
48
3 A/m 3 A/m
Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical
commercial or hospital
environment.
Librestream Onsight 2500 Regulatory and Safety Guide
15
IEC 60601-1-2:2004(Ed 2.1) Table 204 Requirements
The equipment is intended for use in the electromagnetic environment specified
below. The customer or the user of the equipment should assure that it is used in
such an environment.
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic
environment – guidance
Conducted RF
IEC 61000-4-6
3 Vrms
150 kHz to 80
MHz
3V
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz to 2,5
GHz
3 V/m
Portable and mobile RF
communications equipment
should be used no closer to any
part of the equipment including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the
transmitter.
Recommended separation
distance
where P is the maximum output
power rating of the transmitter
in watts (W) according to the
transmitter manufacturer and d
is the recommended separation
distance in meters (m). Field
strengths from fixed RF
transmitters, as determined by
an electromagnetic site survey
(a) should be less than the
compliance level in each
frequency range (b) Interference
may occur in the vicinity of
other known RF transmitting
devices and equipment marked
with the following symbol:
Librestream Onsight 2500 Regulatory and Safety Guide
16
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects and
people.
a) Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM
radio broadcast and TV broadcast cannot be predicted theoretically with accuracy.
To assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in
the location in which the equipment is used exceeds the applicable RF compliance
level above, the equipment should be observed to verify normal operation. If
abnormal performance is observed, additional measures may be necessary, such as
re-orienting or relocating the equipment
b) Over the frequency range 150 kHz to 80 MHz, field strengths should be less than
3 V/m.
Librestream Onsight 2500 Regulatory and Safety Guide
17
9. Australia/New Zealand
N1246
10. Japan
This unit must be connected to the public internet via a router/switch that has JATE
approval.
11. Taiwan
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使
用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能
。低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經
發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使
用。前項合法通信，指依電信法規定作業之無線電通信。低功率
射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機
設備之干擾。
12. WEE Information
Information on collection and recycling arrangements for Librestream customers can
be found at www.librestream.com/recycling
Librestream Onsight 2500 Regulatory and Safety Guide
18
Librestream Onsight 2500 Regulatory and Safety Guide
Doc #: 400151-00 Rev B
November 2011
Information in this document is subject to change without notice. Reproduction in any
manner whatsoever without the written permission of Librestream is strictly forbidden.
Copyright © 2006 – 2010
Librestream Technologies Incorporated.
All rights reserved.
Name of Librestream Products:
Onsight 1000
Onsight 2000
Onsight 2500
Copyright Notice:
Copyright 2004 – 2010 Librestream Technologies Incorporated. All Rights Reserved.
Patents Notice:
United States Patent # 7,221,386, together with additional patents pending in
Canada, the United States and other countries, all of which are in the name of
Librestream Technologies Inc.
Trademark Notice:
Librestream, the Librestream logo, Onsight, Onsight Expert, Onsight Mobile, Onsight
Enterprise, and Onsight Management Suite are either registered trademarks or
trademarks of Librestream Technologies Incorporated in Canada, the United States
and/or other countries. All other trademarks are the property of their respective
owners.
Librestream Contact Information
Website
www.librestream.com
Head Office
Librestream Technologies Inc.
Suite 110, 895 Waverley St.
Winnipeg, Manitoba
Canada, R3T 5P4
General Inquiries:
Email contact@librestream.com
Phone (204) 487-0612
Fax (204) 487-0914
Support:
Email support@librestream.com
Phone (800) 849-5507
Fax (204) 487-0914