Lightcomm Technology MID1016-MK Tablet PC User Manual 18MHZ031 QSG V1 1
Lightcomm Technology Co., Ltd. Tablet PC 18MHZ031 QSG V1 1
User Manual
60mm
240mm
100mm100mm
Quick Setup Guide
10.1 Inch Quad Core Tablet
Features
Important safety instructions 1. Charging the battery
Note: Charge your tablet fully before using it the
first time.
1 Connect the micro USB cable to your tablet.
2 Connect the other end of the micro USB cable
to the USB power adapter (wall charger), then
plug the adapter into a power outlet. It takes
about three hours to fully charge your tablet.
Caution: Use only the included power adapter to
charge your tablet's battery. An incompatible
adapter may damage your tablet.
When you turn on your tablet for the first time,
you'll be prompted to set up things like Wi-Fi and
email.
Follow the instructions displayed on your tablet to
complete setup.
1) Press and hold (power) until the Power off
screen opens.
2) Tap Power Off.
Press and hold the (power) button on the side
of your tablet.
To wall outlet
2. Turning on your tablet
Welcome English (united Kingdom)
English (united States)
Espanol (españa)
3. Setting up your tablet
4. Turning off your tablet:
Guía de instalación rápida
10.1 Inch Quad Core Tableta
Características
Importante instrucciones de seguridad
1. Carga de la batería
Nota: cargue el paquete de baterías completa-
mente antes de usarlo por primera vez.
1) Conecte el cable micro USB a su tableta.
2) Enchufe el otro extremo del cable micro USB
al adaptador de alimentación USB (cargador de
pared) y conecte el adaptador en un tomacorrien-
te. Se necesita aproximadamente tres horas para
cargar completamente su tableta.
Cuidado: use solamente el adaptador de
alimentación incluido la batería de su tableta. Un
adaptador incompatible puede dañar su tableta.
Cuando encienda su tableta por primera vez, se
le pedirá configurar funciones como Wi-Fi y el
correo elctrónico. Siga las instrucciones que se
muestran en su tableta para completar la
instalación.
1) Mantenga presionado el botón (encendido)
hasta que se abra la pantalla Power off
(Desconectar).
2) Toque apagar (Power Off).
Mantenga presionado el botón (encendido) en
la parte lateral de su tableta.
To wall outlet
2. Encendido de su tableta
Welcome English (united Kingdom)
English (united States)
Espanol (españa)
3. Preparación de su tableta
4. Para apagar su tableta:
www.digi-land.net
Made in China
www.digi-land.net
Hecho en China
1) Please read this instruction carefully before
using your device to ensure safe and correct use.
2) Always leave sufficient space around the
product for ventilation. Do not place product in or
on a bed, rug, in a bookcase or cabinet that may
prevent air flow through vent openings.
3) Do not use this unit near water. Do not place
over the unit any container with liquid inside.
4) Please do not put your device in high tempera-
ture, moisture or dust place. The tablet is not
waterproof.
5) Avoid falling or violent collision. Do not violently
shake the touch screen, otherwise, it could lead to
damage or display abnormal.
6) If system shutdown automatically, it means the
battery may used up, battery charging is
required.
7) Please charge the tablet regularly if not in use
for a long time to avoid the damage caused by the
excessive consumption of battery.
8) Do not disassemble or use alcohol, thinner or
benzene class to swab product surface.
9) Please do not use the tablet when driving or
walking in the street, otherwise it may lead an
accident.
10) Please choose the appropriate volume, if had
tinnitus, please lower the volume or stop using.
11) When CPU operates in high speed, especially
playing 3D games or High-definition video for a
long time, the fuselage will have fever.
12) The battery is contained with the device,
please do not take out the battery.
1) Por favor, lea atentamente este manual antes de
usar su dispositivo con el fin de asegurar el uso
seguro y correcto.
2) Siempre deje suficiente espacio para ventilación
alrededor del producto. No ponga el producto en la
cama, alfombra, librero o gabinete que pueda obstruir
la corriente de aire a través de apeturas de
ventilación.
3) No utilice esta unidad cerca de agua. No coloque
sobre la unidad ningún recipiente con líquido en su
interior.
4) Por favor, no ponga el dispositivo en alta tempera-
tura, humedad o el lugar lleno de polvo; la tableta no
es resistente al agua.
5) Evitar caída o colisión violenta, no agitar violenta-
mente la pantalla táctil, de lo contrario, podría
provocar daños o visualización anormal.
6) Si el sistema se apague de forma automática, será
arrancable de nuevo poco después de la parada.
7) Por favor, cargue la tableta con regularidad si no
usarla durante mucho tiempo para evitar daños
causados por el consumo excesivo de la batería.
8) No desmonte, ni utilice alcohol, disolvente o clase
benceno para frotar la superficie del producto.
9) Por favor, no use la tableta cuando se conduce o
se camina por la calle, de lo contrario puede provocar
un accidente.
10) Por favor, elija el volumen adecuado, si tenía
tinnitus, por favor, baje el volumen o deje de usar.
11) Cuando la CPU se funciona bajo alta velocidad,
especialmente en los juegos 3D o en modo de
reproducción a largo tiempo de alta definición de
vídeo, el fuselaje tendrá el fenómeno de fiebre.
12) La batería está contenida con el dispositivo, por
favor
Cut line
Remarks:
Structure Style
Material
technique
Tolerance
Description
折前240*100mm,折后60*100mm
±3mm
Size marking
File Name
Rivision
/
Customer
Project#
Scale
Style
18MHZ031-QSG-V1.1
MID1016
DIGILAND
V1.1
1:1
Designer
Checked
Design Date 2018.08.01
安装指南
80g双胶纸
双面/单黑印刷,风琴折
韦远坤
邹剑文插页
240mm
△此部分折叠在最外面
面
一
面
二
Folding line
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.