Lightcomm Technology MID8006 Tablet User Manual NS P08A7100 16 0058 IMP INFO V2 Final Press

Download:
Mirror Download [FCC.gov]
Document ID	3037619
Application ID	7gFHG9spvR/xM4YaTTSPVA==
Document Description	Users Manual - Model NS-P08A7100
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.86kB (273206 bits)
Date Submitted	2016-06-23 00:00:00
Date Available	2016-09-23 00:00:00
Creation Date	2016-05-12 09:46:35
Producing Software	madbuild
Document Lastmod	2016-05-16 10:49:49
Document Title	NS-P08A7100_16-0058_IMP-INFO_V2_Final_Press
Document Author:	D2

V2
FINAL
FOR PRINT
Important Information
8" Android™ Tablet
NS-P08A7100
FIND YOUR USER GUIDE ONLINE!
We are going green so a copy of your User
Guide is not provided in the box but is
available online. To find your manual, touch the
? icon on your tablet or go to
www.insigniaproducts.com on your computer,
then click Support & Service.
Enter NS-P08A7100 in the box under Manual,
Firmware, Drivers & Product Information, then
click ► .
Before using your new product, please read these instructions to prevent any damage.
NS-P08A7100
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this product near water. Do not touch your device with wet hands.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not expose the device to direct sunlight.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
product.
Only use attachments/accessories specified by the manufacturer.
Unplug this device during lightning storms or when unused for long periods
of time.
To reduce the risk of fire or electric shock, do not expose this device to rain,
moisture, dripping, or splashing.
Do not crush or puncture the product. Avoid exposing the device to high
external pressure. Do not operate the device in a very cold or very hot
temperature, such as in cold weather or in an un-air-conditioned motor
vehicle during intense heat.
Do not remove the cover or back to reduce the risk of electric shock. There
are no user-serviceable parts inside. Refer servicing to qualified personnel.
Do not place the device on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, resulting in possible damage or injury.
To prevent hearing damage, do not use the headphones at a high volume.
Never place heavy or sharp objects on the LCD panel or device.
Only use the AC adapter included with the device. Using any other adapter
will void your warranty.
Troubleshooting
What should I do if I cannot turn on my tablet?
Connect the charger to check the battery level on the screen. If the battery is
too low, your tablet will not turn on. Fully charge the battery.
www.insigniaproducts.com
8" Android™ Tablet
Can I open Microsoft Office and PDF files on my tablet?
You can purchase and download third-party applications to read these files.
What should I do if my tablet won’t recognize the microSD card?
Make sure that you have inserted the memory card correctly and securely.
The memory card should click into place.
With the microSD card inserted, turn off your tablet, then turn it back on.
Make sure that you are attempting to view your files in the correct location on
your tablet.
What should I do if I can’t access the Internet?
Look for a wireless signal indicator ( ) in the status bar at the top of the
screen. If there is no icon, you are not connected.
Make sure that Wi-Fi is turned on.
Make sure that you select the right network and enter the correct password.
Turn your tablet off, then back on.
Reset your Wi-Fi router/modem.
What should I do if there is no sound coming from my tablet?
If listening through headphones, unplug and reconnect your headphones.
Make sure that the connector is pushed in all the way.
If listening through your tablet's speakers, unplug any devices connected to
the headphone jack.
If you are connected to a Bluetooth device, turn off Bluetooth on your tablet.
The volume may be muted or set too low. Increase the volume setting.
Open Apps > Settings > Sound & notification to check your tablet's
sound settings.
Why is the actual storage less than storage in the specification?
Your tablet has the full amount of storage listed in the specification.
However, some of this space is used for system applications and data files.
How do I reset my tablet to factory defaults?
Caution: Resetting your tablet to factory defaults will delete all personal apps and
data from your tablet.
Settings >
Backup & reset.
1. Tap Apps >
2. Tap Factory data reset, then RESET TABLET.
How do I set a screen lock?
Apps >
Settings >
Security > Screen lock.
1. Tap
2. Select a screen lock type, then follow the on-screen prompts to set it up.
www.insigniaproducts.com
NS-P08A7100
What should I do if the display freezes or does not respond?
Press and hold the (power) button for 10 seconds to turn off your tablet,
then turn your tablet back on.
Specifications
Specifications are subject to change without notice.
Operating system
Android 6.0 (Marshmallow)
CPU
Intel Quad-Core
Display
8" diagonal panel (20.3 cm)
800 × 1280 IPS
Capacitive 5-point touch panel
Wireless/Connectivity
Wi-Fi 802.11 b/g/n
Bluetooth 4.0
GPS
Storage
16GB internal memory
Camera
2 MP front-facing (fixed focus)
2 MP rear-facing (auto focus)
Sensors
G-Sensor/Accelerometer
Audio
Internal Speaker, MP3, AAC
Battery and power
4500mAh lithium battery
Up to 4.7 hours video playback
Power supply
5V/2A
Video
H.264, MPEG4
Input and output
MicroSD slot (up to 128GB)
3.5 mm headphone jack
Micro USB
Dimensions (W × H × D)
8.5 × 4.9 × 0.4 in. (21.5 × 12.5 × 1.1 cm)
Weight
0.75 lbs. (0.34 kg)
www.insigniaproducts.com
8" Android™ Tablet
Legal notices
Android is a trademark of Google, Inc.
All other products and brand names are trademarks of their respective owners.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
Note:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
www.insigniaproducts.com
NS-P08A7100
IC RSS Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 Statement
This equipment complies with Industry Canada radiation exposure limits set forth
for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada
limites établies pour un environnement non contrôlé.
Specific Absorption Rate (SAR) Certification Information
Your wireless mobile device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for Radio Frequency (RF) energy
set by the Federal Communications Commission (FCC) of the U. S. Government.
These FCC RF exposure limits are derived from the recommendations of two
expert organizations: The National Council on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and Electronics Engineers
(IEEE). In both cases, the recommendations were developed by scientific and
engineering experts drawn from industry, government, and academia after
extensive reviews of the scientific literature related to the biological effects of RF
energy.
The RF exposure limit set by the FCC for wireless mobile devices employs a unit
of measurement known as the Specific Absorption Rate (SAR). The SAR is a
measure of the rate of absorption of RF energy by the human body expressed in
units of watts per kilogram (W/kg). The FCC requires wireless devices to comply
with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC SAR limit incorporates a substantial margin of safety to give additional
protection to the public and to account for any variations in measurements.
www.insigniaproducts.com
8" Android™ Tablet
SAR tests are conducted using standard operating positions accepted by the FCC
with the mobile device transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the mobile device while operating can be well below
the maximum reported value. This is because the mobile device is designed to
operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna, the
lower the power output of the mobile device.
Before a new model mobile device is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the SAR limit established by
the FCC. Tests for each model mobile device are performed in positions and
locations (e.g. near the body) as required by the FCC.
By typical operations, this mobile device has been tested and meets FCC SAR
guidelines.
Use of other accessories may not ensure compliance with FCC RF exposure
guidelines. The FCC has granted an Equipment Authorization for this mobile
device with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines.
SAR information on this and other model mobile devices can be accessed online
on the FCC’s website through http://transition.fcc.gov/oet/rfsafety/sar.html. To find
information that pertains to a particular model mobile device, this site uses the
mobile device FCC ID number, which is usually printed somewhere on the case of
the mobile device.
Once you have the FCC ID number for a particular mobile device, follow the
instructions on the website and it should provide values for typical or maximum
SAR for a particular mobile device. Additional SAR information can also be
obtained at http://www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellulartelephones.
IFETEL Statement
La operación de este equipo está sujeta a las siguientes dos condiciones:
1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
2) este equipo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su propia operación no deseada.
www.insigniaproducts.com
NS-P08A7100
ONE-YEAR LIMITED WARRANTY - INSIGNIA
DEFINITIONS:
The Distributor* of Insignia branded products warrants to you, the original
purchaser of this new Insignia-branded product (“Product”), that the Product shall
be free of defects in the original manufacturer of the material or workmanship for a
period of one (1) year from the date of your purchase of the Product (“Warranty
Period”).
For this warranty to apply, your Product must be purchased in the United States or
Canada from a Best Buy branded retail store or online at www.bestbuy.com or
www.bestbuy.ca and is packaged with this warranty statement.
HOW LONG DOES THE COVERAGE LAST?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the
Product. Your purchase date is printed on the receipt you received with the
Product.
WHAT DOES THIS WARRANTY COVER?
During the Warranty Period, if the original manufacture of the material or
workmanship of the Product is determined to be defective by an authorized
Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair
the Product with new or rebuilt parts; or (2) replace the Product at no charge with
new or rebuilt comparable products or parts. Products and parts replaced under
this warranty become the property of Insignia and are not returned to you. If
service of Products or parts are required after the Warranty Period expires, you
must pay all labor and parts charges. This warranty lasts as long as you own your
Insignia Product during the Warranty Period. Warranty coverage terminates if you
sell or otherwise transfer the Product.
HOW TO OBTAIN WARRANTY SERVICE?
If you purchased the Product at a Best Buy retail store location, please take your
original receipt and the Product to any Best Buy store. Make sure that you place
the Product in its original packaging or packaging that provides the same amount
of protection as the original packaging. If you purchased the Product from a Best
Buy online web site (www.bestbuy.com or www.bestbuy.ca), mail your original
receipt and the Product to the address listed on the web site. Make sure that you
put the Product in its original packaging or packaging that provides the same
amount of protection as the original packaging.
www.insigniaproducts.com
8" Android™ Tablet
To obtain warranty service, in the United States call 1-888-BESTBUY or in
Canada call 1-866-BESTBUY. Call agents may diagnose and correct the issue
over the phone.
WHERE IS THE WARRANTY VALID?
This warranty is valid only in the United States and Canada at Best Buy branded
retail stores or websites to the original purchaser of the product in the county
where the original purchase was made.
WHAT DOES THE WARRANTY NOT COVER?
This warranty does not cover:
Customer instruction/education
Installation
Set up adjustments
Cosmetic damage
Damage due to weather, lightning, and other acts of God, such as power
surges
Accidental damage
Misuse
Abuse
Negligence
Commercial purposes/use, including but not limited to use in a place of
business or in communal areas of a multiple dwelling condominium or
apartment complex, or otherwise used in a place of other than a private
home.
Modification of any part of the Product, including the antenna
Display panel damaged by static (non-moving) images applied for lengthy
periods (burn-in).
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage or power supply
Attempted repair by any person not authorized by Insignia to service the
Product
Products sold “as is” or “with all faults”
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
Products where the factory applied serial number has been altered or
removed
Loss or Theft of this product or any part of the product
www.insigniaproducts.com
NS-P08A7100
Display panels containing up to three (3) pixel failures (dots that are dark or
incorrectly illuminated) grouped in an area smaller than one tenth (1/10) of
the display size or up to five (5) pixel failures throughout the display. (Pixel
based displays may contain a limited number of pixels that may not function
normally.)
Failures or Damage caused by any contact including but not limited to
liquids, gels or pastes.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR
EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES
NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL
EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER
THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE
TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
©2016 Best Buy. All rights reserved.
Made in China
www.insigniaproducts.com
10
8" Android™ Tablet
www.insigniaproducts.com
11
1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
©2016 Best Buy. All rights reserved.
Made in China.
V1 ENGLISH
16-0058

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Language                        : en-us
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : D2
Description                     : 
Title                           : NS-P08A7100_16-0058_IMP-INFO_V2_Final_Press
Create Date                     : 2016:05:12 09:46:35-05:00
Modify Date                     : 2016:05:16 10:49:49+08:00
Metadata Date                   : 2016:05:16 10:49:49+08:00
Producer                        : madbuild
Document ID                     : uuid:1507aa26-6a83-4bda-98c9-7fec2831e24c
Instance ID                     : uuid:f2993322-8351-4667-9b6e-cd928b30a973
Page Mode                       : UseOutlines
Page Count                      : 12
Author                          : D2
Subject                         : 
Warning                         : [Minor] Ignored duplicate Info dictionary

EXIF Metadata provided by EXIF.tools