Lightolier Lytecaster 1004Icx Users Manual

1004ICX to the manual a66fc1fc-411a-46dc-ab88-69a6a9bb873d

2015-02-09

: Lightolier Lightolier-Lytecaster-1004Icx-Users-Manual-573077 lightolier-lytecaster-1004icx-users-manual-573077 lightolier pdf

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadLightolier Lightolier-Lytecaster-1004Icx-Users-Manual-  Lightolier-lytecaster-1004icx-users-manual
Open PDF In BrowserView PDF
Lytecaster® Recessed Downlighting  1004ICX

Page 1 of 1

5" Aperture

0 High Wattage Incandescent AirSeal Insulated Ceiling Frame-In Kit
®

1004ICXN
(Integral Nail)

7

Overall Length
1004ICX: "
16 3/8"

1004ICX
(Integral Screw)

1

12 1/4"

Overall Width
1004ICX:
10 3/8"

13" MIN.
24" MAX.

Frame-In Kit

Ceiling Opening
3
2

Height: 7 1/4"
Ceiling Opening: 5 1/2"
Top View

4

6

Reflector Trim

5

5" Aperture: Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.

Frame-In Kit	

Reflector Trims­­ — See Individual Reflector Trim Specification Sheets

	
	
Reflector	 Cone	
			

Open Downlight	
Satin 	
Baffles	
Cone		

Recessed
Basic 	
Adjustable	
Eyeball	
White			

Enclosed	
Diffuser	

Open	
Wet Location	

Wall	
Washer		

1004ICX	
1045	
1012	
1008	
1005	
1071	
1004ICXQ*	
1046	
1012NM	
1008NM	 1005WH		
1004ICXN	
1046CD	 1013	
1010	
1005NM		
1004ICXNQ*		
1013BK	
1010NM	 1005BNM		
		
1013WH		
1076		
		
1013CD		
1076WH		
		
1013NM				
		
1013BKNM				
		
1013CDNM				
						
						
						

1027	
1022	
1021	
1084CD	
1035
1027WH	
1022WH	 1024	
1084WH	
1035WH
1027BK	
1023	
1090		
1085		
1027CD	
1023WH			
1095
1027NM	
1082			
1096
1027CDNM				
1096CD
1027BNM
1027BKNM	
1038
1038NM
1048
1048NM 	
*Supplied with integral push-In wire connectors

Features

Options & Accessories

1.	 Housing: .032" (#20 ga.) aluminum. UL listed for direct contact with thermal
insulation. AirSeal® housing minimizes air leak-age to less than 2 CFM
at 1.57 PSF (or 75pa), which complies with Model Energy Code (Section
602.3.3) and Washington State Energy Code (Section 502.4) and reduces
heat loss and condensation in ceiling. Access door for inspection of junction
box.
2.	 Mounting Frame: .032 (#22ga.) galvanized steel. Accommodates ceilings
up to 1" thick. 3/8" deep integral lip. Locks into position along length of
mounting bars with locking screw and bendable slot. Four slots are positioned 90° apart to simplify alignment. Push-in/twist-out roto-clips hold
reflector flush to ceiling.
3.	 Junction Box: 2" X 4" X 3 1/2" (22 cu. in.) .032" (#22 ga.) galvanized steel.
UL listed for maximum of 6 (#12 ga.) 90°C through branch circuit conductors.
Integral cable clamps permit attachment of non-metallic (#12 or #14 ga.)
Romex® cable without tools or additional connectors.
4. Mounting Bars: .059" (#16 ga.) galvanized steel. Bars pivot for easy attachment and wire-in below ceiling line. Bars extend to accommodate 16" to 24"
O.C. joist spacing. Bars can accommodate 12" O.C. joist spacing after a slight
field modification (see Instruction Sheet). 1004ICX features integral self tapping phillips screws for secure attachment to wood or metal construction.
1004ICXN features integral nails for secure attachment to wood. Both attach
to T-bar ceilings without the need of accessories.
5.	 Socket Housing: Impact extruded aluminum or galvanized steel.
6.	 Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 (300 Volt 200° C) leads to junction box.
7.	 Thermal Protector: Meets NEC and UL requirements. Located inside
housing

Extra-Thick Ceiling
Mounting Ring: 		

1967B - 1 1/4" to 2" thick ceilings

Labels

UL (Type I.C., Suitable for Damp Location), I.B.E.W.
Complies with Air Leakage Requirements stated in the Model Energy Code and
the Washington State Energy Code.

AirSeal® is a registered trademark of Lightolier.
Romex® is a registered trademark of General Cable Industries Inc.

Job Information	

Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

Lightolier a Genlyte company

www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • I0507



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Instance ID                     : uuid:b16688db-60db-4efa-9233-d2ca0de18ddd
Document ID                     : adobe:docid:indd:4129c6ac-67cf-11da-b39d-ca35bc43453e
Rendition Class                 : proof:pdf
Manifest Link Form              : ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 90.00, 90.00
Manifest Placed Y Resolution    : 90.00, 90.00
Manifest Placed Resolution Unit : Inches, Inches
Manifest Reference Document ID  : adobe:docid:photoshop:7d34834b-67d4-11da-8984-fc43a9dd7adf, adobe:docid:photoshop:7d34834b-67d4-11da-8984-fc43a9dd7adf
Create Date                     : 2007:05:08 16:22:49-04:00
Modify Date                     : 2007:05:11 08:43:48-04:00
Metadata Date                   : 2007:05:11 08:43:48-04:00
Creator Tool                    : Adobe InDesign CS2 (4.0.2)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 11127 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 1
Creator                         : Adobe InDesign CS2 (4.0.2)
EXIF Metadata provided by EXIF.tools

Navigation menu