Lincoln Electric Power Feed 10M Users Manual Semiautomatic Wire Feeders
10M to the manual 3389e86b-3618-4393-8c13-06b7ad031740
2015-02-09
: Lincoln-Electric Lincoln-Electric-Power-Feed-10M-Users-Manual-574355 lincoln-electric-power-feed-10m-users-manual-574355 lincoln-electric pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
SEMIAUTOMATIC WIRE FEEDERS ™ Power Feed 10M Single and Dual Bench Wire Feeders When you need a versatile, multi-process industrial wire feeder for welding virtually any material, you need the Power Feed 10M. Choose the Power Feed 10M for automotive manufacturing, shipbuilding, pressure vessels/heavy plate, oil, gas and pipeline construction, particularly when code-quality work is required. The new MSP4 user interface panel features the Infrared Port with a Palm® OS-based interface, allowing wireless communication between a handheld device and the welding system, for fast, easy and accurate process control. Description Processes MIG Pulsed Power Feed 10M Single Bench Model shown with optional coil adapter and wire. STT® Flux-Cored Stick TIG Gouging Output Input 40 VDC Advantage Lincoln Single and Dual Bench Models Include: • World-class arc performance on steel, stainless steel, aluminum and other materials. Wire reel stand, MSP4 Panel, 8 ft. input cable assembly with ArcLink/Linc-Net control and weld power cable, high speed pinion gear, gun trigger cable. • Waveform Control Technology™ featuring patented processes like Pulse-On-Pulse™, for a TIG-like bead appearance, and Power Mode™, for a stable arc at low current levels. Recommended General Options • Utilizes ArcLink™ — the leading digital communication protocol for welding, making it the best choice for seamless, time critical integration with the power source. • Synergic CV MIG welding with ideal voltage presets for many applications. Adjust as needed based on personal preference. • Pulsed MIG process — great for low spatter, low heat input and out-of-position applications — makes virtually any operator a better welder! ArcLink/LincNet Control Extension Cables, Weld Power Cables, Coaxial Weld Power Cables, Feed Plate Gun Receiver Bushings, Drive Roll and Wire Guide Kits, Magnum Gun and Cable Assemblies, Push-Pull Guns, Push-Pull Gun Connection Kit, Dual Procedure Switch, ArcLink “T” Connector Kit, Foot Amptrol Connector Kit, Wire Straightener, Spindle Adapters, Readi-Reel Adapters, Coil Adapter, Wire Covers, Incoming Bushing for Lincoln Conduit, Gas Guard Regulator, Water Connection Kit, Magnum Flow Sensor, Caster Kit - Light Duty, 6000 Series Welding Arm Additional Options For Single Bench Model • Weld processes and settings at the feeder add efficiency by placing controls close to the operator. Dual Procedure/Memory Panel, Swivel Platform, Insulated Lift Bail • Easy-to-understand user interface panel with large numeric displays make it easy to set weld parameters. Recommended Power Source Options • Features push-pull capability for great performance on aluminum. • Three year warranty on parts and labor. Power Wave® 355M, Power Wave 455M, Power Wave 455M/STT, Power Wave 655 Robotic, Power Wave 355(1), Power Wave 455(1), Power Wave 455/STT(1). Order K2230-1 Power Feed 10M Bench Model K2234-1 Power Feed 10M Dual Bench Model (1) The LinkNet Power Waves will provide limited capabilities. TECHNICAL SPECIFICATIONS Product Name Product Number Power Feed 10M Bench Model K2230-1 Power Feed 10M Dual Bench Model K2234-1 Input Power Rated Output Current / Duty Cycle Wire Feed Speed Range ipm (m/min) Wire Size Range ipm (m/min) Solid Cored Dimensions HxWxD Inches (mm) 40 VDC 600A/60% 500A/100% High Speed: 75-1200 (2.0-30.5) High Speed: .025 - 1/16 .035 - 5/64 (0.6 - 1.6) (0.9 - 2.0) 18.5 x 13.5 x 30.5 (470 x 343 x 775) 62 (28.1) Low Speed: .025 - 3/32 .035 -.120 (0.6 - 2.4) (0.9 - 3.0) 20.0 x 20.0 x 30.7 (508 x 508 x 781) 90 (40.8) Low Speed: 50-800 (1.27-20.3) Net Weight lbs (kg) Publication E8.266 8/04 www.lincolnelectric.com A CLOSER LOOK FEATURES Infrared Port (IR) MSP4 User Interface Panel Wireless machine configuration and diagnostics using a Palm® OS-based hand-held PDA — no serial cable needed for connection! The New MSP4 User Interface Panel provides full control of mode selection, arc control, weld sequence and — through the IR Port — lockout control. Our Palm® OS-based application configures and troubleshoots Lincoln welding machines that are equipped with the IR Port. Custom set-up to “lock out” operator or limit access to settings to secure systems, regulate activity and produce reliable results time after time. Weld Mode provides easy access to the multiple welding waveform programs in the Power Wave power sources. Large, easy-to-read alpha numeric display. Start Options — preflow time, run-in wire feed speed and start time. Arc Control — Also known as Inductance or Wave Control. It allows the operator to vary the arc characteristics from “soft” to “crisp” in most weld modes. End Options — crater time, burnback time, and postflow time. CV CC STEEL GMAW STD. CV GMAW POWER MODE FCAW STD. CV 5 40 6 STICK 1 SOFT (7018) STAINLESS 0.030 0.035 0.045 0.052 GMAW CO2 --- 10 20 24 GMAW GMAW Ar (MIX) 94 11 21 25 GMAW Ar/He/CO2 PULSE (CRISP) Ar (MIX) 95 12 22 26 PULSE PULSE Ar (MIX) --- 14 19 28 STT (NO TAILOUT) CO2, Ar/CO2 109 109 125 125 STT II CO2, Ar/CO2 110 110 126 126 STICK CRISP (6010) 2 PULSE (SOFT) TIG TOUCH START 3 --- 9 GOUGE ALUMINUM 4043 0.035 3/64 1/16 GMAW Ar 148 71 73 PULSE Ar 149 72 74 PULSE-ON-PULSEAr 98 99 100 5356 0.030 0.035 0.045 61 31 41 63 33 43 Ar/CO2 66 36 46 Ar/O2 62 32 PULSE Ar/He/CO2 --- 34 44 STT Ar/He/CO2 109 109 125 STT II Ar/He/CO2 110 110 126 Ar (Mix) 42 METAL CORE 0.035 3/64 1/16 GMAW Ar 151 75 77 0.045 0.052 1/16 PULSE Ar 152 76 78 GMAW Ar/CO2 81 83 85 PULSE-ON-PULSEAr 101 102 103 PULSE Ar/CO2 82 84 86 M20240 VM GENERAL A welding waveform program chart, conveniently located on the Power Feed 10M Control Box panel, makes standard program selection easy. Delivering an unprecedented level of arc control, the Power Feed 10M includes a number of preset welding waveform programs for applications on a variety of materials, including steel, stainless steel, aluminum, nickel alloys and silicon bronze. Lincoln Electric can add or design custom waveform programs for those customers requiring targeted solutions for other materials, joint configurations, welding procedures, shielding gases or other variables. In addition, Lincoln’s Wave Designer™ software, available upon request, alllows you to build or customize waveform programs yourself. PATENTED DRIVE ROLL SYSTEM — FOUR DRIVE • Split wire guide provides easy wire loading and maintenance. • Variety of drive rolls for any application. 4-Drive Roll • New Twist-Lock™ design. • High speed gear for most fine wire applications. Low speed gear for higher torque with Innershield® wire. Split Wire Guide Brass Connector • Wire feed speed calibrated to monitor and maintain constant speed. • Tachometer feedback to monitor and maintain constant speed. • Brass-to-brass connections and rugged aluminum cast housing provide reliable performance. • Angled for ease of payoff and less stress on cables. • Interchangeable gun bushings for use with a variety of guns. 4-Drive Roll System [2] Power Feed 10M www.lincolnelectric.com A CLOSER LOOK Key Controls Press to select procedure. Synergic Control CV Voltage Display Dual Procedure/Memory Panel Option shown for Power Feed 10M Single Bench Model The Dual Procedure/Memory Panel is standard equipment on Power Feed 10M Dual Bench Models and optional on Single Bench Models. This panel performs three functions: weld procedure selection, feed head selection and memory saving/recall. There are two procedure memories (A and B) and six user memories (1- 6) for each feed head to store your favorite settings. Synergic Control CV programs feature an ideal voltage best suited for most procedures. Use this voltage as a starting point for the weld procedure and adjust if needed based on personal preference. When the voltage knob is rotated, the display will show an upper or lower bar indicating that the voltage is above or below the ideal voltage. • Above ideal voltage (upper bar display) • At ideal voltage (no bar displayed) • Below ideal voltage (lower bar display) Front: 1. Bright, high intensity large digital display of voltage and wire feed speed. 2. Dual Procedure Memory Panel - retain settings in memory to switch back and forth between two different weld procedures. Use any of six memories to store your favorite settings. 3. MSP4 Panel (see page 2). 4. 2-Step/4-Step Trigger Switch — change from simple ON/OFF in 2-step position to trigger interlock in 4-step position. 5. ArcLink status Lighted Electronic Display. 6. Cold Inch/Gas Purge switch — feed wire through a gun, or purge gas line to set flow rate all with welding output off for safety and gas savings. 7. Water Cooler Kit Connection (Optional). 8. 5-pin amphenol gun trigger connector. Back: 1. Access Panel — remove to change DIP settings. 2. Shielding Gas Inlet — industry standard 5/8 - 18 CGA connection. 3. Spool Gun/Push-Pull Gun Connector — for connecting Python®, CobraMAX™ and Prince XL® guns. 4. Remote/Foot Amptrol Connector for TIG welding (Optional). 5. ArcLink Control Cable Connector. 6. Water Cooler Connector (Optional). QUALITY AND RELIABILITY • Rugged steel case, sturdy controls and quality meter displays. • Ambient temperature range for operation (-10° C to +40° C) and storage (-40° C to +40° C). • Designed to resist electrical noise. • Conforms to cCSAUL / CE Standards: C22.2 No. 60, UL551, EN 60974-5, EN 50199. • Meets IP21S rating. • PC Boards are potted, trayed and filled with epoxy for ultimate protection in harsh environments. • Three-year Lincoln warranty on parts and labor. • Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards. [3] Printed circuit boards are trayed, potted and filled with epoxy to provide a robust environmental shield. Power Feed 10M www.lincolnelectric.com A CLOSER LOOK WHAT IS NEXTWELD®? communications provide the foundation for Nextweld innovations like Pulse-On-Pulse™, Power Mode™, STT® and ArcLink®. Look for Nextweld for ultimate arc control, high efficiency/reliability and seamless system integration. Nextweld integrates Lincoln’s technologies, processes and products to create a comprehensive, flexible, user-friendly welding system that can increase efficiency and reduce fabrication costs. Waveform Control Technology™ and digital Waveform Control Technology® Driving Superior Welding Performance Lincoln’s Waveform Control Technology controls and shapes the output waveforms (or weld modes) to adapt to virtually any application, material or weld position. In addition, you can have our Application Engineering department add or customize standard waveform programs or request Lincoln Wave Designer™ software to build or customize waveform progams yourself. For more information see Nextweld Document #NX-1.10 Lincoln Nextweld Innovations for Challenging Applications Waveform Control Technology makes it possible to take advantage of Lincoln innovations like these patented processes using the Power Feed 10M and a Power Wave® power source: Pulse-On-Pulse™ uses a sequence of varying pulse wave shapes to produce a TIG-like bead appearance and excellent weld properties when MIG welding aluminum. Pulse-On-Pulse controls arc length and heat input together, making it easier to achieve good penetration. For more information see Nextweld Document #NX-2.10 Pulse-On-Pulse on 3 mm Aluminum Power Mode™ uses high-speed regulation of output power to deliver extremely fast response to changes in the arc, for example, when using a whip technique. The result is improved MIG welding performance, including low spatter, very uniform, consistent bead wetting and controlled penetration. Power Mode benefits are especially apparent on low voltage applications on thin steel and stainless steel material less than 20 gauge (0.7 mm). It also delivers excellent arc characteristics on aluminum and other alloys such as silicon bronze and nickel alloys. Power Mode reduces spatter and improves bead appearance, even for low voltage procedures on stainless. For more information see Nextweld Document #NX-2.60 Power Mode aids bead wetting and penetration on aluminum. [4] Power Feed 10M www.lincolnelectric.com A CLOSER LOOK WELDING CURRENT PULSE CYCLE Pulsed MIG varies weld current between peak (high heat) and Peak Ramp Up background (low heat) current to provide better control of heat input, which reduces warping and burnthrough on thin materials. Pulsed MIG also enables in-the-flat, horizontal, vertical up, or overhead welding without a slag system. It can be used in hard automation, robotic, and high production semiautomatic applications. Optimized GMAW-P waveforms are readily available to use on aluminum, carbon steel, high strength low alloy steel, stainless steel, and nickel alloys. Tail Out Background Step Off TIME For more information see Nextweld Document #NX-2.70 Low Heat (Background) High Heat (Peak) STT® (Surface Tension Transfer®) is a controlled GMAW short circuit transfer process that uses current controls to adjust the heat independent of wire feed speed, resulting in superior arc performance, good penetration, low heat input control, and reduced spatter and fumes. STT is especially well-suited for steel and stainless steel applications. For more information see Nextweld Document #NX-2.20 STT using CO2 and .045” solid wire. Note reduced spatter and fume. Conventional CV short circuit transfer using CO2 and .045” solid wire. 2. Voltage is automatically set. Synergic MIG Synergic control of voltage and wire feed speed allows you to set weld procedures with only one control for simplicity and ease of use. Set the wire feed speed and your voltage is automatically set. Override the setting with the voltage control for personal preference. 1. Use one knob to set procedures. Digital Communications Fast, Reliable, System-Wide ArcLink is the leading digital communications protocol for the arc welding industry. It integrates all welding components for seamless, time-critical data transfer. The strength of ArcLink lies in the ability to communicate with each system component in a pre-defined welding language. In addition, ArcLink is an open communications protocol, meaning that Lincoln Electric publishes how it works and encourages other companies to adopt it. ® For more information see Nextweld Document #NX-1.30 ® [5] Power Feed 10M www.lincolnelectric.com RECOMMENDED OPTIONS ARCLINK®/LINC-NET CONTROL EXTENSION CABLES 4 Description 5 DRIVE ROLL AND WIRE GUIDE KITS 6 8 ft. (2.5m) 16 ft. (4.8m) 25 ft. (7.6m) 50 ft. (15.2m) 100 ft.(30.4m) Without weld cable Without weld cable Without weld cable Without weld cable Without weld cable K1543-8 K1543-16 K1543-25 K1543-50 K1543-100 WELD POWER CABLES Description Order Number Lug to Lug, 3/0, 600A, 60% duty cycle, 10 ft. Lug to Lug, 3/0, 600A, 60% duty cycle, 35 ft. Lug to Lug, 3/0, 600A, 60% duty cycle, 60 ft. Lug to Lug, 4/0, 600A, 60% duty cycle, 110 ft. K1842-10 K1842-35 K1842-60 K1842-110 25 ft. (7.6m) 50 ft. (15.2m) 75 ft. (22.8m) 100 ft. (30.4m) Order Number 350 amps 350 amps 325 amps 300 amps 5 6 Order Number Solid Steel Wire, Smooth V Groove: .023-.030” (0.6-0.8mm) .035” (0.9mm) solid .040-.045” (1.0-1.2mm) .052” (1.4mm) 1/16” (1.6mm) KP1505-030S KP1505-035S KP1505-045S KP1505-052S KP1505-1/16S Cored Steel Wire, Knurled V Groove: .030-.035” (0.8-0.9mm) .040-.045” (1.0-1.2mm) .052” (1.4mm) 1/16” (1.6mm) 7/64” Hardfacing KP1505-035C KP1505-045C KP1505-052C KP1505-1/16C KP1505-7/64H (Knurled V Groove with matching Smooth U Groove) COAXIAL WELD POWER CABLES (2) Description 4 Description Order Number K1796-25 K1796-50 K1796-75 K1796-100 Cored or Solid Steel Wire, Knurled V Groove: .068-.072” (1.8mm) 5/64” (2.0mm) 3/32” (2.4mm) 7/64” (2.8mm) Cored .120” (3.2mm) Cored KP1505-068 KP1505-5/64 KP1505-3/32 KP1505-7/64 KP1505-120 Aluminum Wire, Smooth U Groove: .035” (0.9mm) .040” (1.0mm) 3/64” (1.2mm) 1/16” (1.6mm) 3/32” (2.4mm) KP1507-035A KP1507-040A KP1507-3/64A KP1507-1/16A KP1507-3/32A (2) Recommended for STT and pulse welding when using long distances between feeder and power source. FEED PLATE GUN RECEIVER BUSHINGS K1500-1 Gun Receiver Bushing (Optional) • Magnum 200, 300 and 400 gun and cable assemblies with K466-1 connector kit. • Lincoln Innershield gun and cable assembly. • Magnum 550 gun and cable assembly with K613-1 connector kit. K1500-2 Gun Receiver Bushing (Standard) K1500-3 Gun Receiver Bushing (Optional) • Magnum 200 and 400 fully assembled guns (K497-2x and K471-2x). • Magnum 550 gun and cable assembly with K613-7 connection. • Magnum 200, 300 and 400 gun and cable assemblies with K466-10 connector kit. • Guns with Tweco #5 connectors. K1500-4 Gun Receiver Bushing (Optional) • Magnum 200, 300 and 400 gun and cable assemblies with K466-3 connector kit. K1500-5 Gun Receiver Bushing (Optional) • To adapt to OXO guns. K489-7 Fast-Mate Gun Receiver Bushing (Optional) • Magnum gun and cable assemblies with Fast-MateTM connections. • Handles both single and dual procedure guns. • Guns with Tweco® #2, #3, and #4 connectors. [6] Power Feed 10M www.lincolnelectric.com RECOMMENDED OPTIONS GENERAL OPTIONS GENERAL OPTIONS 30 lb. (14 kg) Readi-Reel® Adapter Adapts 22-30 lb. (10-14 kg) Lincoln Readi-Reels of electrode to 2” (51mm) spindle. Order K363P Magnum® Gas-Shielded Gun & Cable Assemblies Available 200-550 amps, air-cooled, gasshielded welding guns. Dual procedure capability with gun trigger lock available on 400 amp gun. See bulletin E12.10 Wire Reel Cover Kit Plastic enclosure for up to 44 lb. (20 kg) wire packages. Order K1634-1 Magnum® Self-Shielded Gun & Cable Assemblies Available 250-600 amps. See bulletin E12.110 50-60 lb. Readi-Reel® Adapter Adapts 60 lb. (27.2 kg) coils of Lincoln electrode to 2” (51mm) spindle. Order K438 Push-Pull Guns The Python®, CobraMAX™ and Prince® XL provide optimum push-pull performance at a variety of amperages. Available in air-cooled or water-cooled models. Order K2297-X, K2212-X, and K2252-X 50-60 lb. Coil Adapter Adapts 50-60 lb. (22.6-27.2 kg) coils of Lincoln electrode to 2” (51mm) spindle. Order K1504-1 Plastic Wire Cover Plastic enclosure for up to 60 lb. (27.2 kg) wire packages. Order K1634-2 Push-Pull Gun Connection Kit Required for aluminum welding with the Prince XL, Python and CobraMax air or water-cooled push-pull guns. Includes power block, gun bushing, gas hose adapter, torch gas bypass valve (required for Prince XL Gun only), and wire reel brake limiter. Requires aluminum drive roll kit. Order K2339-1 Incoming Bushing for Lincoln Conduit Feed Plate Incoming Bushings connect directly to wire conduit (not included), for use in boom system, long distances, or large payoff packages. Bushings can be used with any wire conduit (K515 or K565). Order K1546-1 for .025-1/16” wire Order K1546-2 for 1/16-1/8” wire Dual Procedure Switch Allows the use of two welding procedures with each Lincoln Magnum gun connected to an LN-10, DH-10 or Power Feed 10M Bench or Boom model. 15 ft. (7.6m). Order K683-3 Gas Guard Regulator For CO2 and Argon blend gases. Reduces surge caused by excess pressure in supply hose. Includes adjustable flow regulator with removable adjustor key. Order K659-1 ArcLink “T” Connector Kit For connecting multiple feeders to a single power source. Order K2429-1 Water Connection Kit Includes fittings for use with watercooled guns and Magnum Coolers. Kit provides for one gun. Order K590-6 Foot Amptrol® Connector Kit Provides 25 ft. (7.6m) of remote ouput control for TIG welding. (6 pin plug connection). Order K2320-1 Magnum Flow Sensor Rotary Flow Sensor with Leads monitors water cooling flow and shuts off power to gun if water stops. Order K1536-1 Wire Straightener For Lincoln Electric 10 series wire feeders. Straightens wire for better, smoother feeding. Order K1733-1 Caster Kit — Light Duty Mounts to the Universal Wire Reel Stand. Allows for easy movement of wire feeder. Order K1556-1 Spindle Adapter for 14 lb. (6 kg) Innershield® Coils Permits 14 lb. (6 kg) Innershield electrode coils to be mounted on 2” (51 mm) O.D. spindles. Order K435 6000 Series Welding Arm Create a safe, uncluttered work environment where floor space is used effectively with a Lincoln Series 6000 Welding Arm. Glide the arm effortlessly into position when in use or swing it conveniently against a wall or beam for safe, out-of-the-way storage. An 18” x 18” (457 x 457mm) footprint ties up very little floor space. Order K1778-1 Spindle Adapter for 8” O.D. Spools Permits 8” (200mm) O.D. spools to be mounted on 2” (51mm) O.D. spindles. Order K468 [7] Power Feed 10M www.lincolnelectric.com ADDITIONAL OPTIONS FOR SINGLE BENCH MODEL Swivel Platform Mounts to the lift bail on the power source and bottom of the Universal Wire Reel Stand. Wire feeder may be lifted off if needed. Compatible with Light Duty Caster Kit. Includes “lazy susan” parts tray. Order K1557-1 Dual Procedure/Memory Panel Weld procedures are saved into memory for future use. Option on Power Feed 10M Single Bench and Boom. Order K2360-1 Insulated Lift Bail Allows the entire wire feeder to be hung from a crane or hook. Use with Universal Wire Reel Stand. Order K1555-1 POWER FEED 10M ORDER FORM PRODUCT DESCRIPTION ORDER NUMBER POWER FEED 10M BENCH MODEL POWER FEED 10M DUAL BENCH MODEL RECOMMENDED GENERAL OPTIONS ArcLink/Linc-Net Control Extension Cables Weld Power Cables Coaxial Weld Power Cables Feed Plate Gun Receiver Bushings Drive Roll and Wire Guide Kits Magnum Gun and Cable Assemblies Magnum Self-Shielded Gun and Cable Assemblies Push-Pull Guns Push-Pull Gun Connection Kit Dual Procedure Switch ArcLink “T” Connector Kit Foot Amptrol Connector Kit Wire Straightener Spindle Adapter for 14 lb. Innershield Coils Spindle Adapter for 8” O.D. Spools 30 lb. Readi-Reel Adapter Wire Reel Cover Kit 50-60 lb. Readi-Reel Adapter 50-60 lb. Coil Adapter Plastic Wire Cover Incoming Bushing for Lincoln Conduit: - for .025-1/16” wire - for 1/16-1/8” wire Gas Guard Regulator Water Connection Kit Magnum Flow Sensor Caster Kit - Light Duty 6000 Series Welding Arm QUANTITY PRICE K2230-1 K2234-1 See table on page 6 See table on page 6 See table on page 6 See table on page 6 See table on page 6 See publication E12.10 See publication E12.110 K2297-X, K2212-X, K2252-X K2339-1 K683-3 K2429-1 K2320-1 K1733-1 K435 K468 K363P K1634-1 K438 K1504-1 K1634-2 K1546-1 K1546-2 K659-1 K590-6 K1536-1 K1556-1 K1778-1 ADDITIONAL OPTIONS FOR SINGLE BENCH MODEL Dual Procedure/Memory Panel Swivel Platform Insulated Lift Bail K2360-1 K1557-1 K1555-1 RECOMMENDED POWER SOURCE OPTIONS Power Wave 355M Power Wave 455M and 455M/STT Power Wave 655 Robotic see publication E5.146 see publication E5.161 see publication E10.95 TOTAL: C U S T O M E R A S S I S TA N C E P O L I C Y The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter ofpractical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products. Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements. Subject to Change — This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information. T H E L I N C O L N E L E C T R I C C O M PA N Y 22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 8 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:5c27a0a3-277f-4c33-a129-7f8b63b395e3 Producer : Acrobat Distiller 5.0.5 for Macintosh Keywords : MIG welding, pulsed, STT, surface tension transfer, flux-cored welding, stick welding, TIG welding, arc gouging Create Date : 2004:08:19 18:13:19Z Modify Date : 2005:08:02 08:15:49-04:00 Metadata Date : 2005:08:02 08:15:49-04:00 Creator Tool : QuarkXPress(tm) 5.01 Document ID : uuid:663b1263-dd83-4bb4-8b6f-03a105d9f98b Format : application/pdf Creator : Title : Semiautomatic Wire Feeders: Power Feed 10M (Bench Models) Author :EXIF Metadata provided by EXIF.tools