LITE ON TECHNOLOGY MS27RF002 Wireless Mouse User Manual MS eng

Lite-on Technology Corp. Wireless Mouse User Manual MS eng

Manual

LiteON Technology                                                                                                                                                                                       第 1  頁 共3  頁           User’s ManualProduct Name: Wireless MouseModel NO.: SM-2056      (27 MHZ Multi-Channel )      Issue Date: Apr-20- 2006
LiteON Technology                                                                                                                                                                                       第 2  頁 共3  頁1. Product brief descreptionThis is product user’s manual of wireless mouse. It is a multi-channels radio (27MHZ) product.Mouse function includes pointing, left/right button and wheel function (totally 3button). The Agilent ADNS-2030 optical sensor is built in optical mouse, it offer ahigh quality performance for mouse function.Need a receiver at PC end for supporting the function of receiving data..Product Outline of  Mouse*Mouse: Operation Voltage:Voltage supplied to device: 3 VDC (AA battery *2)2  OperationThe product needs to make pairing with USB receiver before normal application.In general we can use the product directly by the user because the pairing process hasbeen done at manufacturer site. However, the pairing process needs to be done if there isno response from mouse.* How to make pairing (step by step as below process) by user:1. Firstly, press the connect button on receiver for more than 0.5s then release.The LED indictor will be on and flashing with correct procedure. It is a normal statuswhile waiting for pairing.2. Secondly, press the connect button on another remote device and release button.3. Thirdly, check the LED status of the receiver. It should flash quickly and then turn off.Its means the pairing process have completely done.4. In order to ensure the pairing work, we need to hit the left/right button or moving mouseto see the response. The LED on the receiver will on when its receive data from remotedevice..* Check the batteries installation, life power and orientation in device if pairing was
LiteON Technology                                                                                                                                                                                       第 3  頁 共3  頁unsuccessfully. Repeats pairing process step 1~4 after verify the battery set.3 Radio parameter*Table-1 Parameter of radio partItem/ Parameter PerformanceField operation distance 2.5m for keyboardModulation Scheme  FSKChannel 11 channels (Maximum)RF channel: – 11 channels (programmable)26.995, 27.020, 27.045, 27.07027.095, 27.120, 27.145, 27.17027.195, 27.225, 27.255 (MHZ)Antenna TypeA on board trace loop on mouse PC board.  Mouse’s FCC- ID        H4IMS27RF002 Federal Communication Commission Interference Statement  This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.  This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.  However, there is no guarantee that interferencewill not occur in a particular installation.  If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one of the following measures:  -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  FCC Caution: Any changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this equipment.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.

Navigation menu