MINEW TECHNOLOGIES S1 Temperature and Humidity Sensor Beacon User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3356631
Application ID	/THzQ3dkOcGHOlms6GhxtQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.99kB (974907 bits)
Date Submitted	2017-04-13 00:00:00
Date Available	2017-04-13 00:00:00
Creation Date	2017-04-06 01:12:27
Producing Software	Microsoft® Word 2010
Document Lastmod	2017-04-06 14:07:11
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Administrator

S1 Temperature & Humidity Sensor Beacon handbook
Version:V0.1
This handbook is written for using the APP BeaconSET on device based
on IOS10.0(iphone device)
Welcome to contact our technical department of our company if you
have any questions!
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
Important tips:
1.S1 is a kind of BLE 4.0 high accuracy digital temperature&humidity sensor product
with temperature&humidity sensor,it is waterproof as well;
2.S1 can convert the environmental temperature and humidity into correspondent
digital signal then broadcasts them,user can check the temperature and humidity data
directly through App;
3.Parameters setting or connection is not supportable;
4.This handbook is mainly about how to acquire temperature and humidity through
App;
5.This handbook applies to App engineers who have access to protocol of bluetooth
4.0.
How to TURN ON/OFF S1 and how to read temperature and humidity data
1 TURN ON/OFF S1 (default:off )
1.1 TURN ON S1
When the S1 is powered off,keep pressing the button at the bottom of S1 for about 3s, the
red LED will light on for 2s,it means that the S1 has been turned on;
1.2 TURN Off S1
When the S1 is powered on,keep pressing the button at the bottom of S1 for about 3s, the
red LED will flash for 5 times,it means that the S1 has been turned off;
The tag content :MAC
Turn on
Turn off
Red LED keeps light
on means the S1 has
been burned on
Red LED keeps flashing
means the S1 has been
burned off
Button
button
at
bottom of S1
the
2 Broadcasting and features
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
2.1 After turned on,the S1 stars broadcasting,meanwhile its blue LED flashes one time per
second(the blue LED is the data indicating LED of S1) ;
2.2 Default device name :’S1’;
2.3Default temperature and humidity data broadcasting interval:1000ms;
2.4Default temperature and humidity data sampling interval:1000ms;
2.5 Default power of broadcasting:0dbm;
2.6 S1 supports over-the-air(OTA).
3 Turn on the bluetooth on your smart phone,then run the APP ‘BeaconSET’(Tts version
should be above V5..0.0) on your smart phone(If you don’t have the App of this version,
kindly download it on App store),as ‘Image 1’
Image 1
4 App searching
4.1 Scanning the broadcasting of S1 by the App ‘BeaconSET’;
4.2 User can find the S1 according to the signal strength indication and filtering device name,
as ‘Image 2’
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
Image 2
4.3 The information shown in the searching interface of App includes:device
name,MAC,battery level,power of broadcasting,temperature data,humidity data,RSSI and
the distance between S1 and user’s smart phone and so on(The RSSI and distance is just for
users’ references).
4.4 Tap the S1 on App’s lists, users can see the dynamic chart about temperature and
humidity,as image 3
Image 3
4.5 Tap the dynamic chart,users can see the line chart about current temperature and
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
humidity, as image 4
Image 4
5 Error range and parameters
--Temperature
Measuring
Humidity Measuring
Sampling period
Item
Range
Value
-40℃~70℃
Measure Accuracy
10℃~55℃
≤10℃ or ≥55℃
0.05℃
0%RH~100%RH
0%RH~90%RH
≥90%RH
0.05%RH
Once per second
Resolution
Range
Measure Accuracy
Resolution
---
Error range
It
depends
on
battery
working
environment
±0.3℃
±2℃
----±2%RH
±3.5%RH
-----
6 How to search certain device on the App ‘BeaconSET’ and what are the interpretations.
6.1 Device name filtering on App:please refer to image 5,after user types in the device model
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
to be scanned in the red search frame,the App will filter automatically and the scan results
will all be about the device names of the kind of device model that user have typed in.For
example, if you type in the model name of S1,scan results will all be the device names of S1;
Type in the device model to be scanned here,the App will
filter automatically and the scan results will all be the
device names of the kind of device model user have typed
in.For example, if you type in the model name of S1,scan
results will all be the device names of S1.
Image 5
6.2 MAC:please refer to image 6,the device MAC is shown as in the red frame.The MAC is
unique and it can be scanned and acquired. (Broadcasting MAC of the device is the same as
its bottom tag shows)
It is about RSSI signal strength and the reference
distance value.
It is MAC of device, each device has its own
unique MAC.
Image 6
6.3 RSSI signal and distance:please refer to image 6,the red frame in the left shows the RSSI
strength and referencing distance.Those RSSI value and distance value are more accurate
only when the device and smart phone is close to each other,and the values are just for
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
references.
6.4 Power of broadcasting:please refer to image 7,the value of transmission power is shown
in the red frame,the default value of transmission power:0dbm.
Tx means broadcasting power,default value:0dbm
Image 7
6.5 Temperature and humidity of broadcasting:please refer to image 8,current environment
temperature and humidity is shown in the red frame,temperature unit:’℃’,humidity unit:’%’.
The accuracy of temperature value under normal temperature is up to ±0.3℃,
The accuracy of humidity value under normal temperature is up to ±2 %RH.
Current environment temperature and humidity is
shown here,temperature unit:’ ℃ ’,humidity
unit:’%’.
Image 8
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
6.6 Battery level of broadcasting:please refer to image 9,the battery level icon is beside the
device name,there are four status for battery level:full battery level status,half battery level
status,1/3 battery level status,and empty battery level status.Battery level was check per
minute.It appears full battery level status when the real battery level is full,it appears half
battery level status when the real battery level lower then 65%,,it appears 1/3 battery level
status when the real battery level lower then 30%,it appears 0 battery level status when the
real battery level lower then 30%;
It appears full battery level status when the real
battery level is full,it appears half battery level
status when the real battery level lower then
65%,,it appears 1/3 battery level status when the
real battery level lower then 30%,it appears 0
battery level status when the real battery level
lower then 30%.
Image 9
6.7 Image 10 can be omitted because the content in the red frame is not compatible with S1
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
The content in the red frame is not compatible
with S1
Image 10
6.8 Introduction of heading column
Please refer to image 11,the brown area shows the heading column,and it is also the option
of scanning.The App ‘BeaconSET’ keeps ranking the scanning result list in the first 10 seconds
of initial scanning,and the device name whose signal strength is the strongest will be ranked
at the top of scanning result lists.The red frames show the heading column which is applied
to S1.
The first heading column means to scan the device name according to device’s signal
strength from strong to weak.The fourth heading column means to lock the current interface
of App to prevent it from ranking all the time.
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
Image 11
Hope the methods above would actually help you scan and find the device you are looking
for more faster.

DECLARATION
The contents of this handbook are for references and are subject to change without prior
notice for further improvement. Minew team reserves all the rights for the final explanation.
All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
10
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2017:04:06 01:12:27+08:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2017:04:06 14:07:11+08:00
Metadata Date                   : 2017:04:06 14:07:11+08:00
Format                          : application/pdf
Creator                         : Administrator
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:58a39162-2c38-4f1e-abf1-c947c98f7832
Instance ID                     : uuid:2cdc1673-2744-401f-80c7-ff1fcb1a5b3f
Page Count                      : 11
Language                        : zh-CN
Author                          : Administrator

EXIF Metadata provided by EXIF.tools