MIRION Technologies ID-2 Instadose 2 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2216322
Application ID	FMswncLmZxjcjm1Eh1c8jw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.28kB (291039 bits)
Date Submitted	2014-03-14 00:00:00
Date Available	2014-03-15 00:00:00
Creation Date	2013-10-11 23:24:25
Producing Software	Mac OS X 10.8.5 Quartz PDFContext
Document Lastmod	2014-02-25 13:57:33
Document Title	Microsoft Word - The instadose 2 system FCC Exhibits 3 ... 4_a.docx.doc
Document Creator	Word
Document Author:	Cindy Meyrath

MIRION	
  PROPRIETARY	
  INFORMATION
Dosimetry Services
Division
instadose 2 Dosimetry
Communication Specifications
instaLink™ USB:
The instaLink USB allows workstations connected to the
internet to transmit dose data to Mirion’s secure servers.
For the instaLink USB to work it must be connected
to the workstation at all times and the instaLink USB
software must be installed on the workstation. The
software has a small footprint of less than 1Mb.
KEY FEATURES
INSTALLATION STEPS
The instaLink USB software will work on Windows XP, Vista, and
7, Windows 8 is currently unavailable.
NOTE: DO NOT plug in the instaLink USB until after the software
has been installed.
To install the instaLink USB software onto workstations you must
have administration privileges and follow the steps below.
•
Bluetooth® wireless technology version 4.0, single mode
•
compliant
• Supports master and slave modes
•
• 4+ simultaneous connection is master mode
Go to www.instadose.com and login with the given
username and password
[Click] Download software under the Manage section of
the home screen
[Click] download instaLink USB software and follow the
instructions.
Integrated Bluetooth low energy stack
• GAP, GATT, L2CAP, SMP
• Bluetooth low energy profiles
Radio performance:
• TX power: +4dBm to -23dBm
• RX sensitivity: -87dBm to -93dBm
• USB, USB HID and virtual COM port emulation
• Bluetooth end product, CE, and FCC qualified
Hardware Features:
• Bluetooth low energy radio
• Built-in antenna
Certifications:
•
•
Bluetooth wireless technology 4.0
CE and FCC
REQUIREMENTS / FUNCTIONALITY OF SOFTWARE:
•
Internet Connectivity
•
Runs on Window XP, Vista, and 7
•
Access to *.instadose.com / port 443
•
During installation, the application will be added to the
StartUp menu – the application will launch when the
workstation boots up
•
The application window does not need to be open for a
device to be read
•
If the workstation is hibernating (sleeping) communication
with instadose 2 dosimeters will not occur
instaLink™ Hotspot Station:
The instaLink hotspot station securely transmits
dose data to Mirion’s server. The station comes with
a power cord and mounting brackets. The instaLink
hotspot station can be connected to your network
by either Ethernet or WiFi. The instaLink comes
with configurable Wifi/Ethernet options: WPA, SID,
Proxies, etc.
KEY FEATURES:
•
Software comes preloaded and is designed to be
functional upon arrival at the customer site
•
instaLink can be plugged directly into a network – Once
connected it will attempt to connect to instadose web
service
Bluetooth wireless technology version 4.0, single mode compliant
• Supports master and slave modes
• 4+ simultaneous connection is master mode
Integrated Bluetooth low energy stack
• GAP, GATT, L2CAP, SMP
• Bluetooth low energy profiles
Radio performance:
• TX power: +4dBm to -23dBm
• RX sensitivity: -87dBm to -93dBm
• USB, USB HID and virtual COM port emulation
• Bluetooth end product, CE, and FCC qualified
LIT4396_0_ US
MIRION	
  PROPRIETARY	
  INFORMATION
Hardware Features:
• Bluetooth low energy radio
• Built-in antenna
Certifications:
Bluetooth wireless technology version 4.0
CE and FCC
•
•
FREQUENCY HOPPING:
Bluetooth low energy technology uses the adaptive
frequency hopping common to all versions of Bluetooth
technology to minimize interference from other
technologies in the 2.4 GHz ISM Band. Efficient multi-path
benefits increase the link budgets and range.
STRONG SECURITY:
DISCOVERY / CONFIGURATION APPLICATION:
Install the instaLink discovery configuration software to
scan and detect instaLink hotspots connected to the
network. IT departments can configure network settings
and unique identifiers for each hotspot.
INSTALLATION STEPS
•
Plug a instaLink hotspot into your hardwired network.
•
Install and run the discovery application software. They
software will identify each instLkink hotspot connected
to the network. The following options are configurable:
•
WiFi – sid and access credentials (username /
Password)
•
Proxy / Network security settings
•
Unique instaLink Identifier (Name) to assist in data
collection statistics
Bluetooth® Smart Dosimeter:
The instadose 2 dosimeter utilizes Bluetooth Low Energy (BLE)
Technology to transmit dose data to a variety of devices. A
facility can select from:
•
iPhones or iPads with the instadose app installed
•
PCs with BLE or with the instaLink-USB connected
•
instaLink Hotspot Station
Full AES-128 encryption using CCM to provide strong
encryption and authentication of data packets.
TOPOLOGY:
Bluetooth low energy technology uses a 32 bit access
address on every packet for each slave. The technology is
optimized for one-to-one connections while allowing oneto-many connections using a star topology.
A new Bluetooth Smart feature is the “advertising”
functionality. The instadose 2 dosimeter (acting as a slave)
can in this way announce that it has dose readings to
transmit to the master (iPhone, iPad, instaLink USB or
instaLink).
Figure 4 shows how the instadose 2 dosimeter communicates
reads.
The instadose 2 dosimeter periodically sends messages
and will always be a slave once the connection is
established. An ipad, iPhone, or instaLink product is ready
to receive an advertisement message and a connection
request. The ipad, iPhone, or instaLink product will always
be a master once the connection is established.
Advertiser
Advertiser
Initiator
DATA TRANSFERS:
Bluetooth low energy technology supports very short data
packets (8 octet minimum up to 27 octets maximum) that
are transferred at 1 Mbps. All connections use advanced
sniff-sub rating to achieve ultra low duty cycles.
Scanner
Figure 4
iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Mirion Technologies is under license. Other trademarks and trade names are those of their respective owners.
© Copyright 2013, All rights reserved. For trademark and registered trademark information.
Specifications are subject to occasional change, please ask for confirmation of the information given in this publication This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation..
LIT4396_0_ US
2652 McGaw Avenue
Irvine, CA 92614
USA
U.S./Canada +1.800.251.3331
U.K.
0170.629.9329
Worldwide
+1.949.419.1000
www.mirion.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Cindy Meyrath
Create Date                     : 2013:10:11 23:24:25Z
Modify Date                     : 2014:02:25 13:57:33-08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Cindy Meyrath
Title                           : Microsoft Word - The instadose 2 system FCC Exhibits 3 ... 4_a.docx.doc
Creator Tool                    : Word
Metadata Date                   : 2014:02:25 13:57:33-08:00
Keywords                        : 
Producer                        : Mac OS X 10.8.5 Quartz PDFContext
Document ID                     : uuid:20084468-bb64-fd40-b1f4-ffcf982a30e7
Instance ID                     : uuid:7cace878-b77d-9645-8a77-742677687b16
Page Count                      : 2

EXIF Metadata provided by EXIF.tools