MSA Innovation 10031511 SCBA HUD User Manual

Mine Safety Appliances Company SCBA HUD Revised Installation Manual

a href="https://usermanual.wiki/MSA-Innovation" itemprop="url"> MSA Innovation >

Contents

Installation Manual Revised 072902

ManualNightFighterInstallation.doc Prnt Spec. 10000005389(B) Mat. 10035581 07/23/02 Page 1 of 15 NightFighter™ INSTALLATION INSTRUCTIONS BRACKET AND TRANSMITTER KIT WARNING! Read this manual carefully if you have or will have the responsibility for using or servicing the product. The ClearCommand™ Communications System from MSA will perform as designed only if used and serviced according to the instructions. Otherwise, the product could fail to perform as designed, and persons who rely on this product could sustain serious personal injury or death. The warranties made by MSA with respect to the product are voided if the product is not used according to the instructions in this manual. We encourage our customers to write or call for a demonstration of this equipment prior to use, or for any additional information relative to use or repairs. Call 1-800-MSA-2222 during regular working hours. NIOSH and NFPA certified as an accessory for the Ultra Elite facepiece for use with the MSA MMR, MMR with Slide Connection and BMR breathing apparatus only. This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
ManualNightFighterInstallation.doc Prnt Spec. 10000005389(B) Mat. 10035581 07/23/02 Page 2 of 15 DESCRIPTION / INSTALLATION TABLE OF CONTENTS DESCRIPTION....................................................................................................................2 PREPARING FOR USE......................................................................................................2 DESCRIPTION 1. The NightFighter Bracket and Transmitter Kit is designed to attach to an MSA Ultra Elite facepiece to allow the easy attachment and removal of the NightFighter. ULTRA-ELITE FACEPIECE Removing the Component Housing Cover for MMR 1. Remove the two component housing cover screws and spacers. Remove the neckstrap. 2. Remove the locking ring. 3. Lift up on the cover release hook, located forward of the adapter assembly opening. Once the release is lifted, you can remove the cover by pulling it away from the housing. You must tilt the cover and work it over one adapter bayonet at a time. Removing the Component Housing Cover for MMR with Slide Connection 1. Remove the two component housing cover screws. Remove the neckstrap. 2. Lift up on the cover. You can remove the cover by pulling it away from the housing. You can tilt the cover and work it over adapter. 3. Unthread and remove the adapter assembly. Removing the Component Housing cover for BMR 1. Unthread and remove the adapter assembly. 2. Remove the two component housing cover screws and the neckstrap. 3. Lift up on the cover release hook, located forward of the adapter assembly opening. Once the release is lifted, you can remove the cover by pulling it away from the housing.
Download:
Mirror Download [FCC.gov]
Document ID259623
Application IDVX19rUEaZpsG2rduTYILWw==
Document DescriptionInstallation Manual Revised 072902
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.86kB (35782 bits)
Date Submitted2002-07-29 00:00:00
Date Available2002-07-29 00:00:00
Creation Date2002-07-23 09:26:21
Producing SoftwareAcrobat PDFWriter 4.0 for Windows
Document Lastmod0000-00-00 00:00:00
Document TitleRevised Installation Manual
Document CreatorManualNightFighterInstallation.doc - Microsoft Word
FCC ID Filing: P9R-10031511

Navigation menu