Mascot Electric UT-9 Wireless Bodypack Transmitter Microphone User Manual UD 9 outline

Mascot Electric Co., Ltd. Wireless Bodypack Transmitter Microphone UD 9 outline

Contents

Users Manual 1of 2

Download: Mascot Electric UT-9 Wireless Bodypack Transmitter Microphone User Manual UD 9 outline
Mirror Download [FCC.gov]Mascot Electric UT-9 Wireless Bodypack Transmitter Microphone User Manual UD 9 outline
Document ID444631
Application IDTZIm7qJ7DyrTnq33y7p6eQ==
Document DescriptionUsers Manual 1of 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize186.02kB (2325264 bits)
Date Submitted2004-06-28 00:00:00
Date Available2004-06-28 00:00:00
Creation Date2004-02-16 09:23:53
Producing SoftwareCorel PDF Engine Version 9.397
Document Lastmod2004-06-05 14:15:00
Document TitleUD-9 outline
Document CreatorCorelDRAW Version 9.397
Document Author: MASCOT

UHFBAND
WIRELESS MICROPHONE SYSTEM
Table ofCanlents
1. Introduction
2. Safety
3. Environment
4. Wireless More
5. ProductDescription
5.1 Rum”
5.1.1 True'diversi'yvype
5.1.2 Swfichmgrd'wusi'y'ype
5: Handheld Microphone
5,3 Bcdypnck Trunsmmer
6. Basic Conneciinns
7. SeflingUp
7.1 Conneding the receiver 10 power
7,2 Conmnng We receiver 10 an audio mm m an umpfifler
7,31nmnng bnnuiu imc Me hundhzld / bodypuck "unsminer
7,4 Semng up 111: hundh=1d Nunsmmer
7,5 Sen‘mg upme bodypucknnnsminer
a. Trouble-shunting
9. System Feature
10. Sysiem Specification
Page
10
11
12
12
WIRELESS NOTE
Fcc Statement
This device complies With part is ot the FCC rules. Operation is subiect to (heiollowr
ing two conditions (1)This device may not cause harmtul intertererice and (2)Thl5 de-
vice must accept any interterence received, including interference that may cause unr
desired operation
Notice : The changes ormodifioations riot expresslyapproved bythe party responsible
for compliance could void the user's authority to operate the equipment.
IMFORTANT NOTE: To comply With the FCC RF exposure compliance requirements,
no change to the antenna or the device is permittedAny change to the antenna or the
device could result in the device exceeding the RF exposure requirements and void
user's authority to operate the device
1. introduction
Thank you for purchasing our product ThisWireless microphone system operates in
UHF band treouency With synthesizercontrolled. The system With 700 selectable {res
ouencies via Phase Locked Loop (PLL) circuitry makes it easy to choose nun-interfered
channels. Please read this instruction manual carelully before operating the system.
This manual covers thetunctiori and operation otthe Wireless microphone system.
2. safety
~ Do not spill liouid on the appliance and do not drop iton a hard concrete floor
~ Do not placethe appliance near heat sources such as radiators, amplitier. or etc
- Do not expose itto direct sunlight, extremelydust, excessive moisture, crvibration.
~ Take outthe battery from transmitter, itthe appliance has been not used fora longer
period. ThisWill avoid the damage resultingtrom a detective leaking battery.
3. Environment
~ Do not throw used batteries into a fire or garbage bin With domestic rubbish Be sure
to dispose ot used batteries in accordance With local waste disposal rules
~ When disposing the equipment, remove the batteries, separate the case, circuit bo-
ards, and cables, and dispose oi all components in accordance With local waste disc
posal rules.
4. Wireless Note
- before setting up, make sure that the transmitterand receiverare tuned to the same
frequency
- Do not use two transmitters in the same lreouency
~ When two or above transmitters are operated simultaneously, please arrange at
least With 10rchannel spaces between each channels.
~ Use good quality batteries to avoid the damage resulting from a detective leaking
battery
~ Push the volume button on the receiverto adiust receiveroutput level to match input
level requirements clan audio mixeroran amplifier
~ To avoid interlerence. do not put the receiver too near metal object and avoid obstru—
ctions between transmitterand receiver.
~ Avoid the interlerence from Tv, radio, otherwireless appliances and etc
PRODUCT DESCRIPTION
5. Product neser'
5.1 Receivers
The receivers are used With our7oo selectable channels transmitters. The receiver
operates in UHF band treouency With PLL synthesized control Powered by izv DC
5.1.1 True-diversity type
Slngle channel. 1/2 rack
a: <2 <3) 5A) (5) to, 6) <5) do Es) it 3.2 {31 (1,5 35 iii
Slngle Channel. lull rack
O ‘ O
0 r6 o
/ UJ
\ , i
m <2 <5) <4) (5; F9; :l
p.
\_l
\,
to
Toots: ti (5:
PRODUCT DESCRIPTION PRODUCT DESCRIPTION
5.1.2 Switching-diversity type 1 Headphone MonitorVolume Control: Rotate this knob to control headphone
volume level.
single channel, 1/2 rack, lixed antennas 2 Headphone lnput Connector: Plug headphone intothis 5-310 connectorto monitor
receiveraudio
Power: Pushes the receiveron and cfl.
channel + Button: Press this button to change channel forward
Channel-Button: Pressthis outtonlo change channelbackward.
Programmable Display: Displays channel number, lreouencyand volume level.
RF Level indicators: Five LEDs perRF antenna channel glow to indicate RF signal
strength. The more LEDsthatglow, the strongerthe received signal. llnone at
these LEDs glow,nosignalis being received.
3 AF Levellndicators: Five LEDs glow toindicale audio signalstrength Greenindi-
/ , \ cates normaloperalion. REDindicates approaching overload condition.
/ ‘ \, \\_'\ 9 Volume+5utton: Pressthisputtontoincreasethereceiveroutputleveltomatchthe
@ (a) g) 6) (a) ® ® w (9 input sens ly olan audio mlxeroran amplifier
10.Volume-Button: Pressthis button to decreasethe receiveroutputlevelto match
theinput sensitivity olan audio mlxercran amplitier.
DC cut: Connectlhe supplied cablelo the receiverand the microphone, and it takes
around 10 hours to charge
, 12.AntennalnputConnector: TNCrtype connectors provide connectiontothe suppli—
ed antennas orlo coaxial cable used with an antenna divider, antenna boosters or
@ remote antennas.
13.Antenna: Fixedrlength UHF antenna permanently mounted on rear panel.
14 Balanced Output: 3-pin XLR connectorprovides balanced low-impedance output
15.Unpalanced Output: 5.3 ophonelack provides unbalancedlow—lmpedance output
15.souelch: The souelch adjusts the outputlevel to suppress the noise. The higher
sduelch control, the lowerthe sensitivity of the receiverand decrease the service
area otthe system Setthe squelch to minimum before turning the receiveron
17 as IN: lnputconnectortorthe suppliedAC adapter
flfliwbw

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:02:16 09:23:53Z
Modify Date                     : 2004:06:05 14:15:00+08:00
Page Count                      : 4
Has XFA                         : No
Creation Date                   : 2004:02:16 09:23:53Z
Mod Date                        : 2004:06:05 14:15:00+08:00
Producer                        : Corel PDF Engine Version 9.397
Author                          : MASCOT
Metadata Date                   : 2004:06:05 14:15:00+08:00
Creator                         : MASCOT
Title                           : UD-9 outline
EXIF Metadata provided by EXIF.tools
FCC ID Filing: JEBUT-9

Navigation menu