Master Lock 4400 4400 User Manual

Master Lock Company 4400 Exhibit D Users Manual per 2 1033 b3

a href="https://usermanual.wiki/Master-Lock" itemprop="url"> Master Lock >

Exhibit D Users Manual per 2 1033 b3

TM9VUPLEFTRIGHTDOWNActivation Code / Code d'activation /Código de activaciónPrimary Code / Code primaire /Código PrincipalQUICK START – UNLOCK WITH MOBILE DEVICE1. Remove lock & instructions from package.2. On mobile device, visit app store & download free Master Lock Vault eLocks app.3. Follow prompts to log into, or create, a Master Lock Vault account.4. In Master Lock Vault elocks app, touch Add a Lock (+).5. Enter ACTIVATION CODE shown above to register lock & follow instructions to connect mobile device to lock.6. Touch any button on lock keypad to wake up lock & prompt it to communicate with your mobile device. Your lock is now in Touch Unlock mode. You can recalibrate the phone-to-lock communication range in the app settings.QUICK START – UNLOCK WITH LOCK KEYPAD1. Remove lock & instructions from package.2. Enter PRIMARY CODE above by pressing the corresponding directions on lock keypad. Do not pull on the shackle when entering code.3. When lock lights green, open within 5 seconds or it will relock.LED KEYPAD INDICATORSBLUE GREEN YELLOW REDLocked, Communicating, or Keypad EntryOpen or Unlocked &Waiting To Be Opened Low Battery Invalid Keypad EntryHOW TO REPLACE BATTERY1. Lock will light yellow to indicate a low battery.2. Unlock & open the lock.3. Pull out battery drawer & remove old battery.4. Install a new CR2450 battery with positive (+) side facing the back of the lock.5. Close battery drawer.Model 4400 Battery InstructionsHOW TO UNLOCK WITH EXTERNAL BATTERY1. If battery dies in locked position, pull battery drawer out part way to expose jump contact point. Do not force the drawer open any further.2. Hold a new CR2450 battery in the slot with positive (+) side of battery facing the front of the lock.3. While holding the battery in place, with authorized mobile device within range of lock, press any keypad button on the lock (if in Touch Unlock mode). If lock does not unlock, enter Primary Code on lock keypad.4. When unlocked, pull out battery drawer & install a new CR2450 battery.HOW TO REPLACE BATTERY1. Lock will light yellow to indicate a low battery.2. Unlock & open the lock.3. Remove bottom cover.4. Use a coin to turn battery door slot 90 degrees counter clockwise (A). Open battery door & remove old battery.5. Install a new CR2 battery with positive (+) side facing right.6. Close battery door, turn slot back 90 degrees clockwise & replace bottom cover.Model 4401 Battery InstructionsHOW TO UNLOCK WITH EXTERNAL BATTERY1. If the battery dies in locked position, remove bottom cover.2. Hold a 9V battery to jump contacts on bottom of lock.3. While holding the battery in place, with authorized mobile device within range of lock, press any keypad button on the lock (if in Touch Unlock mode). If lock does not unlock, enter Primary Code on lock keypad.4. When unlocked, open battery door & install a new CR2 battery.Notice: This padlock and its operating software are subject to U.S. Export Administration Regulation controls. The padlock is subject to ECCN 5A992 and the downloadable app is subject to ECCN 5D992 as mass market software. Exporting this padlock and/or its software contrary to U.S. law is prohibited.Notice: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.4400/4401 Instructions/InstruccionesFor videos, instructions & FAQ’s, visit: Pour des vidéos, directives et FAQ, visitez :Para videos, instrucciones y preguntas frecuentes, visite:masterlock.com/MasterLockVaulteLocks/SupportA
Download:
Mirror Download [FCC.gov]
Document ID2751860
Application IDMdaykNx/CuiDTLmveED03g==
Document DescriptionExhibit D Users Manual per 2 1033 b3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize14.22kB (177708 bits)
Date Submitted2015-09-17 00:00:00
Date Available2015-09-17 00:00:00
Creation Date2015-09-08 12:53:09
Producing SoftwareAdobe PDF library 15.00
Document Lastmod2015-09-08 12:53:09
Document TitleP36572_4400_4401_Bluetooth_InstructionSheet_Update_RND1
Document CreatorAdobe Illustrator CC 2015 (Macintosh)
FCC ID Filing: MZR4400

Navigation menu