Megavision MV141 lcd monitor User Manual MV141 ENG 0510
Megavision co., Ltd. lcd monitor MV141 ENG 0510
Contents
- 1. users manual
- 2. USERS MANUAL
users manual
TFT LCD MONITOR User's Manual Please read the cautions carefully before using this product Do not scratch the screen of the LCD monitor with sharp materials such as nails and pens. The interior part of the monitor is composed of electric elements. If the monitor is broken, do not try to disassemble it, because it is necessary to contact appropriate technical services in order to have the product repaired. Take care of the LCD monitor so that it is not damaged by the external impact. Take care not to use damaged cords and keep this product out of reach of children and persons who are not involved in using the product. Disconnect the power cable when the monitor is not used during a long period of time while you are away from home. Do not use this product near the windows receiving direct sunlight or direct natural light. Choose a fresh and dry area and protect the monitor from extreme conditions of temperature and humidity, dust and smoke. Adequate temperature = 0-40°∆C. Adequate humidity = 30-80 RH The LCD monitor screen can be damaged in the case that you clean the surface by using acetone, ethyl alcohol or acid detergent. Do not install the monitor in a sloping place that is not safe due to the fact that the product can fall down and be broken, thus doing harm to other persons. Note Check the power voltage before connecting to the AC power cable. Take care so that the monitor is not in contact with magnetic materials, metals and inflammable substances. This product uses the TFT LCD panel produced using state-of-the-art technology. The TFT LCD panel consists of millions of pixels and there is much probability of occurrence of bad pixels. Due to this reason, red, blue and green pixels may seem to shine and some black pixels may be visible. But this does not mean that the quality of this product is bad. You can use this product without worrying about the worsening of product performance. Product features Introduction Thank you for buying our TFT LCD monitor. Our monitor is a high-resolution monitor that has features of electromagnetic wave blocking, reduction in electricity consumption, and efficient use of space. In view of the fact that this user's manual is prepared for helping you to adequately use the product, it is recommendable to read the user's manual before using the product. Product features 1) This product has a 15-inch flat surface (Color Active Matrix TFT LCD) with a pixel size of 0.297 mm (H) x 0.297 mm (V) for displaying an ultraprecision, high-resolution image. 2) This product uses TFT (Thin Film Transistor) LCD panel and supports a maximum of 1024 x 768. 3) This product is a monitor whose deflection frequency is automatically transformed up to 30 - 80 kHz horizontally and up to 56 - 75 Hz vertically. 4) This product is compatible with IBM PC and Apple Macintosh (a different adapter is necessary for Apple Macintosh). 5) This product has a power-saving function less than 40 W in ON mode, less than 3 W in stand-by mode, less than 3 W in pause mode and less than 3 W in OFF mode in comparison with other monitors. 6) This product weighs just 1.7 kg. 7) This product supports DDC and allows you to use 'Plug and Play'. Note In the case of some system requirements, it may not be compatible with Plug and Play. Registered as a device whose electromagnetic wave-blocking capacity is adequate (B Class). This product is registered as a device whose electromagnetic wave-blocking capacity is adequate and can be used in all places (including homes). Installation of the product Checking the product Please check if the product contains the following items. If there are some items missing, please contact the technical services. 1. TFT LCD monitor 2. User's manual (including product warranty). 3. AC to DC adapter. 4. Power cable (the power cable can be different according to use environment). 5. Floppy diskette. Cautions when installing the product 1. Install the product in a safe place. 2. Install the product in a place without either moisture or dust. 3. Do not install the product near direct sunlight or heating devices. Installation 1. Turn off the power connected to the monitor before connecting to an external device. 2. Power connection Connect the adapter to the DC jack connected to the signal cable of the monitor and connect the power cable. 3. Signal connection This signal input terminal is a D-SUB connector. Connect the signal cable to the signal input of the computer. 4. Turn on the power of the monitor. 5. Turn on the power of the system that you want to use. 6. Continue with the operation when the screen appears. You can adjust the desired status of the screen using control buttons at the bottom of the monitor. 7. If you wan to finish the operation, turn off the system power and then turn off the power of the monitor. Names and operation of control buttons Names and operation of control buttons This monitor has several control buttons. They can be used according to the user preference. Function of the buttons Power button (POWER) If you press the power button, the indicator lamp is turned on, and the operation of the monitor is initiated. If you do not want to start the operation of the monitor, press the power button again. Power indicator lamp (green) Considering that this product has a power-saving function, if the power cable is connected, the power indicator lamp is shown as follows. MODE ON Power indicator lamp Green Screen Active STAND BY SUSPEND OFF Green (blinks every second) Blanked Blanked Blanked MENU If you press the menu button, the OSD (On-Screen Display) menu window appears. You can choose the desired item using the button (decrease)/ (increase) in the OSD menu, or you can modify the selected values. AUTO/SELECT button If you press AUTO/SELECT button in the screen status, it is automatically adjusted for the optimal size and optimal position, and if you press the button, it functions as a selection button. Selection and operation of the OSD menu You can select the OSD menu in the OSD window using all the control buttons at the bottom of the screen. To change the current settings or adjust them for the desired settings, follow the following steps. MENU SELECT (Select the menu item) MENU SELECT (Exit the OSD menu window) (Select the main item) SELECT (Select the main item) 1. Press the Menu button to open the OSD menu window. 2. Press the ◀/▶button to move the item of desired main menu. 3. If you highlight the desired menu item, press the Select button. 4. Press the ◀/▶button to move the desired sub-menu item. 5. If you highlight the sub-menu item, press the Select button. 6. Press the ◀/▶button to modify the current value. 7. Press the Select button to save the modified value. 8. To close the OSD menu window, press the Menu button or choose 'Exit (Salir) in the sub-menu window. Note The OSD window will disappear within a few seconds if there is no input in the OSD window. It does not appear when there is no input signal. The menu that can be configured by the user in this product uses the pulldown menu. The main menus are as follows. 1. Color Adjusts brightness, contrast, sharpness and saturation. 2. Image Adjusts the position and sharpness of the screen. 3. Function Adjusts the position, sharpness and saturation of the screen. 4. OSD menu Adjusts the language used, the position of the menu screen, the display time of the menu screen and the saturation of the menu screen. 5. Miscellaneous Configures a certain screen status and initializes the menu value. Note Each menu has its corresponding items. You can modify the value after selecting the desired item according to the selection method and OSD menu operation in the previous chapter. If you choose the menu, the icon corresponding to the chosen menu blinks, and the selected menu appears in the menu selection screen. Menu 1. Color menu 2. Image menu If you press the menu button, the following screen appears. Main menu screen Menu selection screen Submenu screen ï\é¶Window Current screen status Contrast Adjusts contrast. 0 ~ 100 Brightness Adjusts brightness. 0 ~ 100 Gamma correction Adjusts the clarity of color. 0 ~ 31 Color template Adjusts the color desired by the user. 19300. 6500. 5000. User. Color adjustment Adjusts colors (red, green and blue). Red: Adjusts color saturation. 0 ~ 100 Green: Adjusts color saturation. 0 ~ 100 Blue: Adjusts color saturation. 0 ~ 100 Exit: Exits the current setting. Exit Exits the current menu. Horizontal position Adjusts the horizontal position of the current screen. 0 ~ 100 Vertical position Adjusts the vertical position of the current screen. 0 ~ 100 Sharpness Modifies sharpness of the screen. 0 ~ 50 0 ~ 31 Phase Adjusts the center of the current screen. 0 ~ 30 Clock Increases or decreases the number of pixel to adjust the horizontal size. Exit Exits the current menu. Menu 3. Function menu Auto-Adjust Configures Auto-Position, AutoPhase, Auto-Clock and AutoColor at the same time. Auto-Position Adjusts the position of the screen automatically. Auto-Phase Adjusts the center of the screen automatically. Auto-Clock Adjusts the pixel size of the screen automatically. Auto-Color Adjusts the colors of the screen automatically. Exit Exits the current menu. 4. OSD menu Language Configures the language used in the OSD menu. The languages are as follows: English, German, French, Italian, Spanish, Chinese Simplified, Chinese Traditional and Japanese. OSD horizontal position Adjusts the horizontal position of the OSD menu screen. 00 ~ 110 OSD vertical position Adjusts the vertical position of the OSD menu screen. 00 ~ 110 OSD timer - On: The OSD menu screen disappears after a certain time period. - Off: The OSD menu screen does not disappear even after a certain time period.Press the Menu button in order for the OSD menu screen to disappear. Translucent - On: Switches the OSD menu screen to the translucent mode. - Off: Disables the translucent mode. Exit Exits the current menu. Menu 5. Miscellaneous Mode selection - 640 x 400: Optimizes the screen status for the status of 640 x 240. - 720 x 400: Optimizes the screen status for the status of 720 x 400. Reset Resets all the functions. Exit Exits the current menu. Description of operation messages Cable not connected It appears when there is no input signal from the computer. If the message disappears, the monitor status is changed to energy-saving mode. Signal out of range It appears when the input signal is out of range. Cable Not Connected Signal Out of Range Timing guide Timing guide This product is a multi-frequency monitor. It functions in horizontal frequencies from 30 kHz to 80 kHz and vertical frequencies from 56 Hz to 75 Hz. Due to its design based on microprocessor, it offers the functions of automatic synchronization and automatic size. This monitor is equipped with 10 programmed configurations that are shown in the timing table. The followings are the ten configurations. Resolution Frequency Clock [MHz] Preset VGA M1 M2 M3 VESA Vertical Horizontal Vertical 720 400 31.5KHz 70Hz 28.322 -/+ 480 31.5KHz 60Hz 25.175 -/- 480 37.5KHz 75Hz 31.500 -/- 60Hz 40.000 +/+ +/+ 640 640 M4 800 600 37.9KHz M5 800 600 46.9KHz 75Hz 49.500 768 48.4KHz 60Hz 65.000 -/- 75Hz 78.750 +/+ M6 MAC Polarity (H/V) Horizontal 1024 M7 M8 1024 768 60.0KHz 1280 1024 64.0KHz 60Hz 108.000 +/+ M9 1280 1024 80.0KHz 75Hz 135.000 +/+ M10 832 624 49.7KHz 75Hz 57.284 -/- Signal connection This signal input terminal is a D-SUB connector. Connect the signal cable to the signal input of the computer. Note PIN NO Disconnect the power connected to the monitor before connecting the signal output of the system. DESCRIPTION PIN NO DESCRIPTION Red No Connection Green 10 Ground Blue 11 Ground No Connection 12 SDA Ground 13 Houizontal-Sync Red Ground 14 Vertical-Sync Green Ground 15 CSL Blue Ground 10 10 Product specifications Product specifications LCD Type 14" diagonal view able screen TFT Thin Film Transistor Active Matrix Panel Color filter 0.279mm(H)×0.279mm(V) pixel pitch RGB vertical stripe Colors Glass surface Screen status 262,144 colors Anti-glare coating 90° / 60° 200 : 1 Angle of view Contrast ratio Brightness Left/Right Typ. Typ. 150 cd/m2 IBM XT, AT, 386, 486, Pentium or PS/2 and Compatibility PC Refresh rate Maximum compatibles (from VGA up to 1024x768 @ 75Hz Nl). 1024x768 @ 75 Hz Nl (60 Hz for optimal display) Connectors Input Signal Power 15-pin D-SUB Jack type DC+12 V In AC 100-240 V, 50-60 Hz Voltage/Power Input Output Consumption Screen size Maximum Features Temperature Humidity Altitude Storage conditions Dimension Weight Temperature Humidity Set / Packing DC 12 V 40 watts 285.696 mm(H) x 214.262 mm(V) 33°F ~ 104°F (0°C ~ 40°C) 20%RH-90%RH (no condensation) Up To 10,000 feet -14°F ~ 104°F (-20°C ~ 40°C) 5%RH90%RH(no condensation) 319.4mm(W)×272.7mm(H)×140mm(D) 1.7 kg / 2.5 kg ★ The design and specifications of the product are subject to change without previous notice to improve the quality of the product. 11 Before asking for repair service Before asking for repair service You can contact our technical services or selling agency if you want to ask for repair service. Check the following before you ask for repair service. Screen shows no image. - Check if the power cable is correctly connected. - Check if the power of the monitor is turned off. - Check if the system power is turned off. - Check if the signal cable of the monitor is connected. Screen is too dark or bright. - See color menu (see page 7). Screen is tilted left / right or upward/downward. - See position menu. - Run Auto-Tune function. Date of purchase Purchased from Telephone: 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2004:05:11 22:25:27Z Modify Date : 2004:05:18 18:48:19+09:00 Page Count : 13 Creation Date : 2004:05:11 22:25:27Z Mod Date : 2004:05:18 18:48:19+09:00 Producer : Acrobat Distiller 5.00 for Macintosh Author : sunfull Metadata Date : 2004:05:18 18:48:19+09:00 Creator : sunfull Title : MV141_ENG_0510 Has XFA : NoEXIF Metadata provided by EXIF.tools