Microsoft RM-99 GSM 900/1800/1900 wBT User Manual R1112 en
Microsoft Mobile Oy GSM 900/1800/1900 wBT R1112 en
Contents
- 1. Manual
- 2. manual
Manual
Nokia N70-5
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole
responsibility that the product RM-99 is in conformity
with the provisions of the following Council Directive:
1999/5/EC. A copy of the Declaration of Conformity
can be found at http://www.nokia.com/phones/
declaration_of_conformity/
The crossed-out wheeled bin means that within the European Union the
product must be taken to separate collection at the product end-of-life.
This applies to your device but also to any enhancements marked with this
symbol. Do not dispose of these products as unsorted municipal waste.
Copyright © 2005 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, Nokia N70, and Pop-Port are trademarks or
registered trademarks of Nokia Corporation. Other product and company names
mentioned herein may be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
Visual Radio is a sound mark of Nokia Corporation.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
This product includes software licensed from Symbian Software Ltd (c) 1998-
200(5). Symbian and Symbian OS are trademarks of Symbian Ltd.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc.
Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one
or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425.
Other patents pending.
Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745,
5016009, 5126739, 5146221, and 5414425. Other patents pending.
Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.
US Patent No 5818437 and other pending patents. T9 text input software Copyright
(C) 1997-2005. Tegic Communications, Inc. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in
a personal and noncommercial activity and (ii) for use in connection with MPEG-4
video provided by a licensed video provider. No license is granted or shall be implied
for any other use. Additional information, including that related to promotional,
internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://
www.mpegla.com.
The information contained in this user guide was written for the Nokia N70
product. Nokia operates a policy of ongoing development. Nokia reserves the right
to make changes to any of the products described in this document without prior
notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR
INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED
BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT.
NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY
TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software subject to export
laws and regulations from the U.S. and other countries. Diversion contrary to law is
prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
English Issue 1, XXXXXXX
Contents
Contents
For your safety...........................................6
Welcome.....................................................9
Accessibility solutions.......................................................... 9
Register your device ............................................................. 9
Copyright protection ............................................................ 9
Find information about your device.................................9
Contact your service provider..........................................10
Updates ..................................................................................10
Nokia support and contact information .......................10
Your Nokia N70...................................... 11
Insert the (U)SIM card and battery ................................11
Insert the memory card .....................................................11
Eject the memory card.......................................................12
Charge the battery..............................................................13
Headset...................................................................................13
Wrist strap.............................................................................13
Keys and parts......................................................................14
Switch the device on..........................................................15
About the display ................................................................15
MMS and Internet settings...............................................16
Essential indicators.............................................................16
Keypad lock (keyguard)......................................................16
Tips for efficient use...........................................................17
Mobile service ......................................................................17
Help.........................................................................................17
Tutorial...................................................................................18
Shortcuts ...............................................................................18
Clock .......................................................................................19
Volume and loudspeaker control....................................20
File manager.........................................................................20
Memory card tool................................................................22
Personalize your device...........................23
Profiles—set tones...............................................................24
Transfer content from another device ..........................25
Change the look of your device ......................................25
Active standby mode..........................................................26
Make calls ................................................27
Call ..........................................................................................27
Answer or decline a call....................................................29
Log...........................................................................................30
Contacts....................................................33
Save names and numbers.................................................33
Contents
Copy contacts ...................................................................... 34
Add ringing tones for contacts....................................... 35
Create contact groups....................................................... 35
Camera and Gallery .................................36
Camera................................................................................... 36
Gallery .................................................................................... 44
Imaging.....................................................47
Image print ...........................................................................47
RealPlayer.............................................................................. 48
Movie director...................................................................... 50
Messaging.................................................52
Write text.............................................................................. 53
Write and send messages................................................. 55
Inbox—receive messages................................................... 57
My folders ............................................................................ 59
Mailbox.................................................................................. 59
Outbox—messages waiting to be sent.......................... 62
View messages on a SIM card.........................................62
Messaging settings.............................................................62
Radio.........................................................67
Listen to the radio ..............................................................68
View visual content............................................................ 68
Saved stations......................................................................69
Settings.................................................................................. 69
Calendar ...................................................70
Create calendar entries .....................................................70
Calendar views.....................................................................71
Remove calendar entries................................................... 71
Calendar settings ................................................................ 72
Web...........................................................73
Access the Web ...................................................................73
Bookmarks view...................................................................74
Make a connection.............................................................74
Browse.................................................................................... 75
Download and purchase items........................................76
End a connection ................................................................ 77
Web settings.........................................................................77
My own.....................................................79
Games..................................................................................... 79
Music player .........................................................................79
Go to—add shortcuts..........................................................80
IM—instant messaging (chat)..........................................81
Connectivity .............................................85
Bluetooth connection........................................................85
PC connections ....................................................................88
Connection manager..........................................................89
Contents
Remote synchronization....................................................90
Device manager ...................................................................91
Office ....................................................... 93
Calculator ..............................................................................93
Converter ...............................................................................93
To-do.......................................................................................94
Notes.......................................................................................94
Recorder.................................................................................95
Tools......................................................... 96
Settings ..................................................................................96
Voice commands............................................................... 105
Application manager ....................................................... 105
Activation keys—handle copyright-protected files. 108
Troubleshooting .................................... 109
Enhancements....................................... 112
Power....................................................................................112
Data.......................................................................................112
Audio.....................................................................................113
Accessibility ........................................................................113
Car .........................................................................................113
Imaging and lifestyle........................................................113
Battery information ............................. 114
Charging and discharging...............................................114
Nokia battery authentication guidelines....................114
Care and maintenance ......................... 116
Additional safety information............. 117
6
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH ON SAFELY Do not switch the
device on when wireless phone use is
prohibited or when it may cause interference
or danger.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE All wireless devices may be
susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the device off near
medical equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
SWITCH OFF WHEN REFUELING Do not use
the device at a refueling point. Do not use near
fuel or chemicals.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the device where
blasting is in progress.
USE SENSIBLY Use only in the normal position
as explained in the product documentation. Do
not touch the antenna unnecessarily.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your device is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make back-up
copies or keep a written record of all important
information.
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
7
guide for detailed safety instructions. Do not
connect incompatible products.
EMERGENCY CALLS Ensure the phone
function of the device is switched on and in
service. Press the end key as many times as
needed to clear the display and return to the
start screen. Enter the emergency number,
then press the call key. Give your location. Do
not end the call until given permission to do so.
About your device
The wireless device described in this guide is approved for
use on the EGSM 900/1800/1900 networks. Contact your
service provider for more information about networks.
When using the features in this device, obey all laws, and
respect privacy and legitimate rights of others.
When taking and using images or video clips, obey all laws,
and respect local customs as well as privacy and legitimate
rights of others.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched
on. Do not switch the device on when wireless
device use may cause interference or danger.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features in this device
depend on features in the wireless network to function.
These network services may not be available on all
networks or you may have to make specific arrangements
with your service provider before you can utilize network
services. Your service provider may need to give you
additional instructions for their use and explain what
charges will apply. Some networks may have limitations
that affect how you can use network services. For
instance, some networks may not support all language-
dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device may
also have been specially configured. This configuration
may include changes in menu names, menu order, and
icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this device,
such as MMS, browsing, e-mail, and content downloading
using a browser or over MMS, require network support for
these technologies.
8
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider, network operator, or other vendor.
Enhancements, batteries, and
chargers
Always switch the device off, and disconnect the charger
before removing the battery.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-3, or AC-4 charger, and from
an ACP-8, ACP-9, or ACP-12U charger when used with the
CA-44 charger adapter.
The battery intended for use with this device is BL-5C.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Welcome
9
Welcome
Congratulations on your purchase of the Nokia N70. Your
device provides many functions that are practical for daily
use, such as a calendar, a clock, an alarm clock, and a
built-in camera. Use the camera to record video clips and
take pictures. You can use the pictures as wallpaper in the
standby mode or as thumbnail pictures in Contacts. See
"Camera‚" p. 36 and "Gallery‚" p. 44.
You can personalize your device with ringing tones and
themes. See "Personalize your device‚" p. 23.
Other features on your device include the following:
• Instant messages. See "IM—instant messaging (chat)‚"
p. 81.
• RealPlayer. See "RealPlayer‚" p. 48.
• Bluetooth technology. See "Connectivity‚" p. 85.
• J2ME™ (Java 2 Platform, Micro Edition).
See "Application manager‚" p. 105.
• Web browser. See "Web‚" p. 73.
Accessibility solutions
Nokia is committed to making mobile devices easy to
use for all individuals, including those with disabilities.
For more information, visit www.nokiaaccessibility.com.
Register your device
Make sure to register your device at
www.warranty.nokiausa.com or 1-888-NOKIA-2U
(1-888-665-4228) so that we can serve your needs
better if you need to call the center or have your device
repaired.
Copyright protection
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred, or forwarded.
Find information about
your device
Information about your device is provided on the device
label, which is on the back of the device under the battery.
The label contains the model and serial numbers, as well
as the following:
• Device type (such as RM-99)
• Device model (such as Nokia N70)
Welcome
10
• International mobile equipment identity (IMEI)
• FCC ID number
Contact your service provider
In many cases, the service provider will make available
descriptions of its services and instructions for using
features, such as the following:
• Voice mail and voice privacy
• Call waiting, call forwarding, and caller ID
•Messaging
• News and information services
• Selected Internet services
Service providers may differ in their support of features.
Before you sign up with a service provider, make sure that
the service provider supports the features that you need.
Updates
From time to time, Nokia may update this guide to
reflect changes. The latest version may be available at
www.nokiausa.com. Also, an interactive tutorial may
be available at www.nokiausa.com.
Nokia support and contact
information
Check www.nokiausa.com/support or your local Nokia
Web site for the latest version of this guide, additional
information, downloads, and services related to your Nokia
product.
On the Web site, you can get information on the use of
Nokia products and services. If you need to contact
customer service, check the list of local Nokia Care contact
centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia Care
services location at www.nokiausa.com/support.
Your Nokia N70
11
Your Nokia N70
Model number: N70-5
Hereinafter referred to as the Nokia N70.
Insert the (U)SIM card and
battery
Keep all SIM cards out of the reach of small children.
Always switch the device off, and disconnect the charger
before removing the battery.
1With the back of the
device facing you,
press the release
button (1), and slide
the cover in the
direction of the arrow
(2).
2Lift the cover (3).
3To release the (U)SIM
card holder, lift the
holder up (4).
4Insert the (U)SIM card
(5). Make sure that
the contact area on
the card is facing the
connectors on the
device and the
beveled corner on the
card is facing the base
of the device.
5Close the holder, and
lock it into place.
6Insert the battery (6).
7Replace the back
cover.
Insert the
memory card
Use only compatible Reduced Size Dual Voltage (1.8/3.0 V)
MultiMediaCards (RS-MMC) with this device. Other
memory cards, such as Secure Digital (SD) cards, do not fit
in the memory card slot and are not compatible with this
device. Using an incompatible memory card may damage
Your Nokia N70
12
the memory card as well as the device, and data stored on
the incompatible card may be corrupted.
Use your memory card to save the memory on your device.
You can also back up information from your device to the
memory card. If not included in your sales package,
contact your dealer for availability of the memory card
and multimedia card adapter.
Memory card (Reduced Size MultiMediaCard
RS-MMC)
MultiMediaCard (MMC) adapter
The adapter allows you to use the RS-MMC in another
compatible device that has a full-size MMC slot. You do
not need the adapter when you use the RS-MMC in your
Nokia N70.
1To insert the memory
card, open the door of
the memory card slot
(7). Place your finger
in the recess on top of
the door, and lift out
the door.
2Insert the memory
card in the slot (8).
Make sure that the
contact area on the
card is facing up and
the beveled corner is
facing the base of the
device.
3Push the card in (9). You hear a
click when the card locks into
place.
4Close the door. You cannot use
the memory card if the door is
open.
Eject the memory card
1Open the door of the memory
card slot.
2Press the memory card to release
it from the slot.
3Remove the memory card. If the
device is switched on, select OK.
Important: Do not remove
the memory card in the middle of an operation
when the card is being accessed. Removing the card
Your Nokia N70
13
in the middle of an operation may damage the memory
card as well as the device, and data stored on the card may
be corrupted.
Charge the battery
1Connect a compatible
charger to a wall
outlet.
2Connect the power
cord to the device. The
battery indicator bar
starts scrolling. The
device can be used
while charging. If the battery is completely discharged,
it may take a few minutes before the charging indicator
is shown.
3When the battery is fully charged, the bar stops
scrolling. Disconnect the charger, first from the device,
then from the wall outlet.
The BL-5C battery provides up to 3.5 hours of talk time and up to
12 days of standby time. Operation times are estimates and may
vary depending on network conditions, charging, and device
use. Charging the battery with the ACP-12U charger takes
approximately 1 hour and 20 minutes while the device is in
standby mode.
Headset
Connect the compatible
headset to the Pop-PortTM
connector of your device.
Warning: When
you use the headset, your ability to hear outside
sounds may be affected. Do not use the headset
where it can endanger your safety.
Wrist strap
Thread the strap as shown
in the picture, and
tighten it.
Your Nokia N70
14
Keys and parts
• Power key (1)
• Loudspeaker
outlet (2)
• Light sensor (3)
constantly
observes the
lighting
conditions. May
cause the display
and keypad to
flash in low light.
•
Selection keys (4)
to select
commands and
items
• Call key (5)
• 5-way scroll
key (6) to move
around the menus. Press the scroll key in the middle
( ) to select, accept, or activate.
• Menu key (7) opens the main menu.
• Edit key (8) opens a list of commands when you
edit text.
• Microphone (9)
• Press and hold (10) as a shortcut to a Web
connection.
• Clear key (11) deletes text and items.
• Multimedia key (12) is a shortcut to applications.
• End key (13)
• Camera shutter key (14) for still image capture with the
camera
• Memory card
slot (15)
• Earpiece (16)
•Open the
camera lens
cover (17) to
activate the
camera.
• Camera (18) for
high resolution
image capture or
video recording
• LED flash (19)
•Charger
connector (20)
• Pop-PortTM
connector (21)
for the USB data
cable, headset,
and other enhancements
Your Nokia N70
15
Switch the device on
Press and hold the power key .
If the device asks for a PIN
code, UPIN code, or lock
code, enter the code
(displayed as ****), and
press (OK). The
(U)PIN code is usually
supplied with the (U)SIM
card. The factory setting
for the lock code is 12345. For more information on the
access codes, see "Security‚" p. 101.
Use the device only in its normal operating position.
Your device has an internal antenna.
Note: As with any other radio transmitting device,
do not touch the antenna unnecessarily when the
device is switched on. Contact with the antenna
affects call quality and may cause the device to
operate at a higher power level than otherwise
needed. Avoiding contact with the antenna area
when operating the device optimizes the antenna
performance and the battery life.
When you switch on the device for the first time, it may
ask you to set the following information: Select current
city:, Time:, and Date:. Use the scroll key ( ) and the
number keys. To find the city, enter the first letters of the
city name. The city you select also defines the time zone
for the clock in your device.
Press (menu key) to open the main menu.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device may
also have been specially configured. This configuration
may include changes in menu names, menu order, and
icons. Contact your service provider for more information.
About the display
Remove the protective plastic film covering the display.
Your Nokia N70
16
MMS and Internet settings
Your Nokia N70 normally has MMS, GPRS, streaming, and
Internet settings automatically configured in the device,
based upon your service provider or network operator
information.
Essential indicators
The device is being used in a GSM network.
You have received one or several messages to the
Inbox folder in Messaging.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set
to Off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used.
All calls to the device are forwarded to another
number. If you have two phone lines, the indicator for the
first line is and for the second .
A headset is connected to the device.
A loopset is connected to the device.
The connection to a headset with Bluetooth has been
lost.
A data call is active.
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
Bluetooth connectivity is on.
Data is being transmitted using a Bluetooth
connection.
A USB connection is active.
An e-mail that has been read is waiting for you to
retrieve to your device.
An e-mail that has not been read is waiting for you to
retrieve to your device.
Keypad lock (keyguard)
Use the keypad lock to prevent the keys from being
accidentally pressed.
To lock: In the standby mode, press , then . When
the keys are locked, is shown on the display.
Your Nokia N70
17
To unlock: Press , then .
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
Opening the camera lens cover deactivates the keypad
lock, if it is on. Closing the camera lens cover returns the
device to the previous mode, and keypad lock is
reactivated, if it was on.
To turn on the display light when the keypad lock is on,
press .
Tips for efficient use
• When you take a picture or record a video, press to
send the item as a multimedia message. You cannot
send video clips that are saved in the .mp4 format in a
multimedia message.
• To send the message you are writing, press .
• In the standby mode, press to open the last dialed
numbers list.
• To switch between Normal and Silent profiles, press
and hold . If you have two phone lines, this action
switches between the two lines.
For more shortcuts, see "Shortcuts‚" p. 18.
Mobile service
Use Mobile Service to configure settings for wireless
services. The online service may be offered by your
network operator or Nokia, and available settings depend
on the provider. To connect to the online service, press ,
and select Tools > Mobile Service. Follow the instructions
on the display to retrieve the desired settings. The service
may also provide support materials for using your device.
Help
Your device has context-sensitive help. You can access the
help from an application or from the main menu.
When an application is open, to access help for the current
view, select Options > Help. For example, to view
instructions on how to create a contact card, start to
create a contact card, and select Options > Help.
When you are reading the instructions, to switch between
help and the application that is open in the background,
press and hold .
To open help from the main menu, select Tools > Help.
Select the desired application to view a list of help topics.
To search for help topics using keywords, select Options >
Search by keyword.
Your Nokia N70
18
When you are reading a help topic, to view other related
topics, press or .
Tutorial
The tutorial gives you information about some of the
features of your device. To access the tutorial in the menu,
press , and select My own > Tutorial and the section
you want to view. To ensure you have access to all tutorial
contents, insert the memory card into the device.
Shortcuts
Use shortcuts to quickly get the most from your device.
Refer to the relevant sections in this user guide for further
details of the functions.
Take pictures
• To adjust image setup settings before taking a picture,
press .
• After taking a picture, to send the image Via
multimedia, Via e-mail, or Via Bluetooth, select
Options > Go to Gallery. Open the image and press
. For more information, see "Messaging‚" p. 52 and
"Bluetooth connection‚" p. 85.
• To delete an image, press .
• To take a new picture, press or the camera shutter
key.
Record video clips
• To adjust video setup settings before recording video,
press .
• After recording a video clip, to send the video Via
multimedia, Via e-mail, or Via Bluetooth, press .
You cannot send video clips saved in the .mp4 format
in a multimedia message. For more information, see
"Messaging‚" p. 52 and "Bluetooth connection‚" p. 85.
• To delete a video clip, press .
Edit text and lists
• To mark an item in a list, scroll to it, and press and
at the same time.
• To mark multiple items in a list, press and hold
while you press or . To end the selection, release
, then release .
• To select letters and words to copy and paste, press and
hold . At the same time, press or . As the
selection moves, text is highlighted. To copy the text to
clipboard, while still holding , select Copy. To insert
the text into a document, press and hold , and
select Paste.
Standby mode
• To switch between applications that are open, press
and hold . If memory is low, the device may close
some applications. The device saves any unsaved data
before closing an application.
Your Nokia N70
19
Leaving applications running in the background
increases the demand on battery power and reduces
the battery life.
• To change the profile, press , and select a profile.
• To switch between Normal and Silent profiles, press
and hold . If you have two phone lines, this action
switches between the two lines.
• To open the last dialed numbers list, press .
• To use voice commands, press and hold .
• To start a connection to Web, press and hold . See
"Web‚" p. 73.
For further shortcuts available in the standby mode, see
"Active standby mode‚" p. 26.
Keypad lock (keyguard)
• To lock: In the standby mode, press , then .
• To unlock: Press , then .
• To turn on the display light when the keypad lock is on,
press .
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
Clock
Press , and select Clock.
To set a new alarm, select Options > Set alarm. Enter the
alarm time, and select OK. When the alarm is active, is
shown.
To turn off the alarm, select Stop. When the alarm tone
sounds, select Snooze to stop the alarm for 5 minutes,
after which it resumes. You can do this a maximum of five
times.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Clock > Options > Remove
alarm.
Clock settings
To change the clock settings, select Options > Settings in
the clock. To change the time or date, select Time or Date.
To change the clock shown in the standby mode, scroll
down, and select Clock type > Analog or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), scroll down, and select Auto time update. For the
Your Nokia N70
20
Auto time update setting to take effect, the device
restarts.
To change the alarm tone, scroll down, and select Clock
alarm tone.
To change the daylight-saving time status, scroll down,
and select Daylight-saving. Select On to add 1 hour to
the My current city time. See ‘World clock’, p. 20. When
the daylight-saving is active, is shown in the clock
main view. This setting is not shown if Auto time update
is on.
World clock
Open Clock, and press to open the world clock view.
In the world clock view, you can view the time in different
cities.
To add cities to the list, select Options > Add city. Enter
the first letters of the city name. The search field appears
automatically, and the matching cities are displayed.
Select a city. You can add a maximum of 15 cities to the
list.
To set your current city, scroll to a city, and select
Options > My current city. The city is displayed in the
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Volume and loudspeaker control
To increase or decrease the
volume level when you have
an active call or are listening
to a sound, press or .
The built-in loudspeaker allows you to speak and listen
from a short distance without having to hold the device to
your ear. Sound applications use the loudspeaker by
default.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To use the loudspeaker during a call, start a call, and select
Options > Activate loudsp..
To turn off the loudspeaker when you have an active call
or are listening to a sound, select Options > Activate
handset.
File manager
Many features of the device use memory to store data.
These features include contacts, messages, images, ringing
tones, calendar and to-do notes, documents, and
downloaded applications. The free memory available
Your Nokia N70
21
depends on how much data is already saved in the device
memory. You can use a memory card as extra storage
space. Memory cards are rewritable, so you can delete and
save data on a memory card.
To browse files and folders in the device memory or on a
memory card (if inserted), press , and select Tools > File
mgr.. The device memory view ( ) opens. Press to
open the memory card view ( ).
To move or copy files to a folder, press and at the
same time to mark a file, and select Options > Move to
folder or Copy to folder.
To find a file, select Options > Find and the memory from
which to search, and enter a search text that matches the
file name.
You can use Nokia Phone Browser available in Nokia PC
Suite to view the different memories in your device. See
the CD-ROM, if supplied in the sales package.
View memory consumption
To view what types of data you have in the device and how
much memory the different data types consume, select
Options > Memory details. Scroll down to Free memory
to view the amount of free memory in the device.
To view the amount of free memory on the memory card,
if you have a card inserted in the device, press to open
the memory card view, and select Options > Memory
details.
Memory low—free memory
The device notifies you if the device memory or memory
card memory is getting low.
To free device memory, transfer data to a memory card in
the file manager. Mark files to be moved, select Move to
folder > Memory card, and a folder.
To free memory from the device or from the memory card,
use Image Store available in Nokia PC Suite to transfer
images and video clips to a compatible PC. See the
CD-ROM, if supplied in the sales package.
To remove data to free memory, use File mgr., or go to the
respective application. For example, you can remove the
following:
• Messages from Inbox, Drafts, and Sent folders in
Messaging
• Retrieved e-mail messages from the device memory
• Saved Web pages
• Saved images, videos, or sound files
• Contact information
•Calendar notes
• Downloaded applications. See also "Application
manager‚" p. 105.
• Any other data that you no longer need
Your Nokia N70
22
Memory card tool
This device uses a Reduced Size Dual Voltage (1.8/3.0 V)
MultiMediaCard (RS-MMC). To ensure interoperability,
use only dual voltage RS-MMCs. Check the compatibility
of an RS-MMC with its manufacturer or provider.
Press , and select Tools >
Memory. You can use a
memory card as extra
storage space. It is also good
to regularly back up the
information in the device
memory to the memory card.
The information can be
restored to the device later.
You cannot use the memory
card if the door of the
memory card slot is open.
Important: Do not remove the memory card in the
middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as
the device, and data stored on the card may be
corrupted.
To back up information from device memory to a memory
card, select Options > Backup phone mem.
To restore information from the memory card to the device
memory, select Options > Restore from card.
To rename a memory card, select Options > Memory card
name.
Format a memory card
When a memory card is reformatted, all data on the card
is permanently lost.
Some memory cards are supplied preformatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
To format a memory card, select Options > Format mem.
card and Yes to confirm. When formatting is complete,
enter a name for the memory card, and select OK.
Personalize your device
23
Personalize your device
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device may
also have been specially configured for your network
provider. This configuration may include changes in menu
names, menu order, and icons. Contact your service
provider for more information.
• To use the standby display for fast access to your most
frequently used applications, see "Active standby
mode‚" p. 26.
• To change the standby
mode background image
or what is shown in the
power saver, see "Change
the look of your device‚"
p. 25.
• To customize the ringing
tones, see "Profiles—set
tones‚" p. 24.
• To change the shortcuts
assigned for the different
presses of the scroll key
and left and right selection keys in the standby mode,
see "Standby mode‚" p. 97. The scroll key shortcuts are
not available if the active standby is on.
• To change the clock shown in the standby mode, press
, and select Clock > Options > Settings > Clock
type > Analog or Digital.
• To change the clock alarm tone, press , and select
Clock > Options > Settings > Clock Alarm tone and
a tone.
• To change the calendar alarm tone, press , and
select Calendar > Options > Settings > Calendar
alarm tone and a tone.
• To change the welcome note to a text or an image,
press , and select Tools > Settings > Phone >
General > Welcome note or logo.
• To assign an individual ringing tone to a contact, press
, and select Contacts. See "Add ringing tones for
contacts‚" p. 35.
• To assign a 1-touch dial to a contact, press a number
key in the standby mode ( is reserved for the voice
mailbox), and press . Select Yes, then select a
contact.
• To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders, and place
applications that you use more often into the main
menu.
Personalize your device
24
Profiles—set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles. If
the currently selected profile is other than Normal, the
profile name is shown at the top of the display in the
standby mode.
To change the profile, press in the standby mode.
Scroll to the profile you want to activate, and select OK.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Customize.
Scroll to the setting you want to change, and press to
open the choices. Tones stored on the memory card are
indicated with . You can scroll through the tone list
and listen to each one before you make your selection.
Press any key to stop the sound.
When you choose a tone, Tone downloads opens a list of
bookmarks. You can select a bookmark and start
connection to a Web page to download tones.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator area. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Warning: In the Offline profile you cannot make
or receive any calls, except make calls to certain
emergency numbers, or use other features that
require network coverage. To make calls, you must
first activate the phone function by changing
profiles. If the device has been locked, enter the
lock code.
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
wireless device use is prohibited or when it may
cause interference or danger.
To leave the Offline profile, press , and select another
profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength). If a
Bluetooth connection is activated before entering the
Offline profile, it will be deactivated. A Bluetooth
connection is automatically reactivated after leaving the
Offline profile. See "Bluetooth connection settings‚" p. 83.
Personalize your device
25
Transfer content from
another device
You can copy contacts, calendar, images, video, and sound
clips using a Bluetooth connection, from a compatible
Nokia Series 60 device.
You can use your Nokia N70 without a SIM card. The
offline profile is automatically activated when the device
is switched on without a SIM card. This allows you to use
the SIM card in another device.
To avoid duplicate entries, you can transfer the same type
of information (for example, contacts) from the other
device to your Nokia N70 only once.
Before starting the transfer, you must activate Bluetooth
connectivity on both devices. On each device, press ,
and select Connect. > Bluetooth. Select Bluetooth > On.
Give a name to each device.
To transfer content:
1Press , and select Tools > Transfer on your
Nokia N70. Follow the instructions on the screen.
2The device searches for other devices with Bluetooth
connectivity. When it has finished the search, select
your other device from the list.
3You are asked to enter a code on your Nokia N70. Enter
a code (1-16 digits), and select OK. Enter the same
code on the other device, and select OK.
4The Transfer application is sent to the other device as
a message.
5Open the message to install Transfer on the other
device, and follow the instructions on the screen.
6From your Nokia N70, select the content you want to
copy from the other device.
Content is copied from the memory and memory card of
the other device to your Nokia N70 and memory card.
Copying time depends on the amount of data to be
transferred. You can cancel copying and continue later.
The Transfer application is added to the main menu of the
other device.
Change the look of your
device
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Themes. The active
theme is indicated by . In Themes you can group
together elements from other themes or select images
from the Gallery to personalize themes further. The
themes on the memory card are indicated by . The
themes on the memory card are not available if the
memory card is not inserted in the device. If you want to
use the themes saved in the memory card without the
memory card, save the themes in the device memory first.
Personalize your device
26
To open a browser connection and download more
themes, select Theme downloads.
To activate a theme, scroll to it, and select Options >
Apply.
To preview a theme, scroll to it, and select Options >
Preview.
To edit themes, scroll to a theme, and select Options >
Edit to change the following options:
Wallpaper—The image to be shown as a background
image in the standby mode.
Power saver—The power saver type on the display: date
and time, or a text you have written yourself.
See "Display‚" p. 97.
Image in 'Go to'—The background image for the Go to
application.
To restore the selected theme back to its original settings,
select Options > Restore orig. theme when you edit a
theme.
Active standby mode
Use your standby display for fast access to your most
frequently used applications. By default, the active
standby mode is on.
Press , select Tools > Settings > Phone > Standby
mode > Active standby, and press to switch the active
standby on or off.
The active standby display is
shown with default
applications across the top of
the screen.
Scroll to an application or
event, and press .
The standard scroll key
shortcuts available in the
standby mode cannot be used
when the active standby
mode is on.
To change the default applications shortcuts, do the
following:
1Press , select Tools > Settings > Phone > Standby
mode > Active standby apps., and press .
2Highlight a shortcut to an application, and select
Options > Change.
3Select a new application from the list, and press .
Some shortcuts may be fixed, and you are not able to
change them.
Make calls
27
Make calls
Call
To increase or decrease the volume during a call, press
or . If you have set the volume to Mute, you cannot
adjust the volume with the scroll key. To adjust the volume,
select Unmute, and then press or .
1In the standby mode, enter the phone number,
including the area code. Press to remove a number.
For international calls, press twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2Press to call the number.
3Press to end the call (or to cancel the call attempt).
Pressing always ends a call, even if another
application is active.
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name; or enter the first
letters of the name to the search field. Matching contacts
are listed. Press to call. Select the call type Voice call.
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See "Copy
contacts‚" p. 34.
To call your voice mailbox (network service), press and
hold in the standby mode. See also "Call forwarding‚"
p. 103.
To change the phone number of your voice mailbox, press
, and select Tools > Voice mail > Options > Change
number. Enter the number (obtained from your service
provider), and select OK.
To call a recently dialed number in the standby mode,
press to access a list of the last 20 numbers you called
or attempted to call. Scroll to the number you want, and
press to call the number.
Make a conference call
1Make a call to the first participant.
2To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
The device supports conference calls between a
maximum of six participants, including yourself.
Make calls
28
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The
conference call is put on hold on your device. The other
participants can still continue the conference call.
After you finish the private conversation, select
Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference>
Drop participant, scroll to the participant, and select
Drop.
4To end the active conference call, press .
1-touch dial a phone number
To activate 1-touch dialing, press , and select Tools >
Settings > Call > 1-touch dialing > On.
To assign a phone number to one of the 1-touch dialing
keys ( — ), press , and select Tools > 1-touch.
Scroll to the key to which you want to assign the phone
number, and select Options > Assign. is reserved for
the voice mailbox.
To call in the standby mode, press the 1-touch dial key
and .
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select Options > Play
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you
should not rely solely upon voice dialing in all
circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1To start voice dialing, press and hold . If you are
using a compatible headset with the headset key, press
and hold the headset key to start voice dialing.
Make calls
29
2A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a time-out of
1.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches, or Quit to cancel voice
dialing.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (work),
Telephone, Tel. (home), and Tel. (work).
Answer or decline a call
To answer the call, press .
To mute the ringing tone when a call comes in, select
Silence.
If a compatible headset is connected to the device, to
answer and end a call, press the headset key.
If you do not want to answer a call, press to decline
it. The caller hears a line busy tone. If you have activated
the Call forward settings > If busy function to forward
calls, rejecting an incoming call also forwards the call. See
"Call forwarding‚" p. 103.
When you decline an incoming call, you can also send a
text message to the caller. Select Options > Send text
message. You can edit the text before sending it. See also
Reject call with SMS,” p. 97.
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting (network service).
To change the device tones for different environments and
events, for example, when you want your device to be
silent, see "Profiles—set tones‚" p. 24.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself from
the calls. To end the active call, press . To end both
calls, select Options > End all calls.
Options during a call
Many of the options that you can use during a voice call
are network services. Select Options during a call for some
Make calls
30
of the following options: Mute or Unmute, Answer,
Decline, Swap, Hold or Unhold, Activate handset,
Activate loudsp., or Activate handsfree (if a compatible
headset with Bluetooth connectivity is attached), End
active call or End all calls, New call, Conference, and
Transfer. Select from the following:
Replace—To end an active call and replace it by answering
the waiting call.
Send touch tones—To send touch tone strings, for
example, a password. Enter the touch tone string or
search for it in Contacts. To enter a wait character (w) or
a pause character (p), press repeatedly. Select OK to
send the tone.
You can add touch tones to the Phone number or Touch
tones fields in a contact card.
Log
Recent calls
To monitor the phone numbers of missed, received, and
dialed calls, press , and select My own > Log > Recent
calls. The device registers missed and received calls only if
the network supports these functions, the device is
switched on, and within the network service area.
When you see a note in the standby mode about missed
calls, select Show to access the list of missed calls. To call
back, scroll to a name or number, and press .
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call timers
To monitor the approximate duration of your incoming and
outgoing calls, press , and select My own > Log > Call
timers.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call timers, select Options > Clear timers. To do
this, you need the lock code. See "Security‚" p. 101 and
"Phone and SIM‚" p. 101.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select My own >
Log > Packet data. For example, you may be charged for
Make calls
31
your packet data connections by the amount of data sent
and received.
Monitor all communication events
Icons in Log:
Incoming
Outgoing
Missed communication events
To monitor all voice calls, text
messages, or data
connections registered by the
device, press , select My
own > Log, and scroll right to
open the general log. For
each communication event,
you can see the sender or
recipient name, phone
number, name of the service
provider, or access point. You
can filter the general log to
view just one type of event and create new contact cards
based on the log information.
If you want to see the duration of a voice call on the main
display during an active call, select Options > Settings >
Show call duration > Yes.
To view a list of sent messages, press , and select
Messaging > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or Web pages are shown as
packet data connections.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log and Yes to confirm.
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the device memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
To view the details of a communication event, in the
general log view scroll to an event, and press the scroll
key.
In the details view you can copy a phone number to the
clipboard, and paste it to a text message, for example.
Select Options > Copy Number.
Packet data counter and connection timer: To view how
much data, measured in kilobytes, is transferred and how
Make calls
32
long a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View details.
Contacts
33
Contacts
Press , and select Contacts. In Contacts you can add a
personal ringing tone or a thumbnail image to a contact
card. You can also create contact groups, which allow you
to send text messages or e-mail to many recipients at the
same time. You can add received contact information
(business cards) to contacts. See "Data and settings‚" p. 58.
Contact information can only be sent to or received from
compatible devices.
Regularly back up the information on the device to the
memory card. You can restore the information, such as
contacts, to the device later. See "Memory card tool‚"
p. 22. You can also use Nokia PC Suite to back up your
contacts to a compatible PC. See the CD-ROM, if supplied
in the sales package.
Save names and numbers
1Select Options > New contact.
2Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press and to mark the contacts, and press to
delete.
To add and edit contact cards, you can use Nokia Contacts
Editor available in Nokia PC Suite. See the CD-ROM, if
supplied in the sales package.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown when the
contact calls.
To send contact information, select the card you want to
send. Select Options > Send > Via text message, Via
multimedia, or Via Bluetooth. See "Messaging‚" p. 52 and
"Send data using Bluetooth wireless technology‚" p. 86.
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1In contacts, select a contact, and press .
2Select Options > Defaults.
Contacts
34
3Select a default to which you want to add a number or
an address, and select Assign.
4Select a number or an address you want to set as a
default.
Copy contacts
If you have phone numbers stored on the SIM card, copy
them to Contacts. Entries that are saved only on the SIM
card are not shown in the contacts directory, and for
incoming calls and messages, the device cannot match
the number to the name.
When a new SIM card is inserted in the device and you
open Contacts for the first time, you are asked if you want
to copy the contact entries on the SIM card to the device
memory. Select Yes to copy the entries to your contacts
directory.
To copy individual names and numbers from a SIM card to
your device, press , and select Contacts > Options >
SIM contacts > SIM directory. Select the names you
want to copy and Options > Copy to Contacts.
To copy contacts to your SIM card, press , and select
Contacts. Select the names you want to copy and
Options > Copy to SIM direct., or Options > Copy > To
SIM directory. Only the contact card fields supported by
your SIM card are copied.
You can synchronize your contacts to a compatible PC with
Nokia PC Suite. See the CD-ROM, if supplied in the sales
package.
SIM directory and other SIM services
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider, network operator, or other vendor.
Press , and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialing contacts. This setting is
only shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select Options > Activ. fixed dialing. To add
new numbers to the fixed dialing list, select Options >
New SIM contact. You need the PIN2 code for these
functions.
When you use Fixed dialing, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialing list.
Contacts
35
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
Add ringing tones for contacts
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognizes it).
1Press to open a contact card, or go to the groups
list, and select a contact group.
2Select Options > Ringing tone. A list of ringing tones
opens.
3Select the ringing tone you want to use for the
individual contact or the selected group.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
1In Contacts, press to open the groups list.
2Select Options > New group.
3Write a name for the group or use the default name
Group N, and select OK.
4Open the group, and select Options > Add members.
5Scroll to a contact, and press to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
new name, and select OK.
Remove members from a group
1In the groups list, open the group you want to modify.
2Scroll to the contact, and select Options > Remove
from group.
3Select Yes to remove the contact from the group.
To check to which groups a contact belongs, scroll to the
contact, and select Options > Belongs to groups.
Camera and Gallery
36
Camera and Gallery
Camera
In Camera, you can take pictures and record videos. To
move between still image and video capture, select
Options > Image mode or Video mode.
To activate the camera, open the camera lens cover on the
back of the device. The Camera application starts when
the camera is activated, and you can see the view to be
captured.
The images and video clips are automatically saved in the
Gallery. The camera produces .jpeg images, and video
clips are recorded in the .3gpp file format with the .3gp
file extension (Normal and Sharing video quality modes)
or in the .mp4 file format (High video quality mode). See
"Video settings‚" p. 42. You can also send images or a
video in a multimedia message as an e-mail attachment,
or with Bluetooth wireless technology.
You can insert an image into a contact card. See "Save
names and numbers‚" p. 33.
Your Nokia N70 supports an image capture resolution of
up to 1600 x 1200 pixels. The image resolution in these
materials may appear different.
Take pictures
To make lighting and color adjustments before taking a
picture, select Options > Image setup > Scene, Flash,
White balance, or Color tone. See "Adjust color and
lighting‚" p. 39 and "Scenes‚" p. 39.
To capture still images, press the key or use the camera
shutter key (located on the right side of the device).
Camera indicators show the following:
• The device memory ( ) and memory card ( )
indicators (1) show where images are saved.
• The images indicator (2) estimates how many images,
depending on the selected image quality, can fit in the
remaining memory of your device or the memory card.
• The scene indicator (3) shows the active scene. See
"Scenes‚" p. 39.
Camera and Gallery
37
• The flash indicator (4)
shows if the flash is set to
Automatic (), Forced
(), or Off ().
• The resolution indicator
(5) shows the selected
image quality. See "Adjust
still image camera
settings‚" p. 38.
• The sequence mode
indicator (6) shows that
the sequence mode is
active. See "Take pictures in a sequence‚" p. 37.
• The self-timer indicator (7) shows that the
self-timer is activated. See "You in the picture—self-
timer‚" p. 38.
Saving the captured image may take longer if you change
the zoom, lighting, or color settings.
When taking a picture, note the following:
• It is recommended to use both hands to keep the
camera still.
• To take images or record video in different
environments, use the correct scene for each
environment. See "Scenes‚" p. 39.
• The quality of a zoomed picture is lower than that of a
non-zoomed picture.
• The camera goes into the battery saving mode if there
are no keypresses within a minute. To continue taking
pictures, press or the shutter key.
After the image is taken, note the following:
• If you do not want to keep the image, press .
• To send the image Via multimedia, Via e-mail, or Via
Bluetooth, select Options > Go to Gallery. Open the
image and press . For more information, see
"Messaging‚" p. 52, and "Bluetooth connection‚" p. 85.
This option is not available during an active call.
• To edit the picture, select Options > Edit. See "Edit
images‚" p. 40.
• To print the picture, select Options > Print. See "Image
print‚" p. 47.
Take pictures in a sequence
To set the camera to take pictures in a sequence with a
single press of the key or the camera shutter key,
select Options > Sequence mode. If you press and hold
the key or the camera shutter key, image capture
continues until you release the key. The number of
pictures you can capture depends on the available
memory.
You can also use the sequence mode with the Activate
self-timer. See "You in the picture—self-timer‚" p. 38. If
Camera and Gallery
38
the self-timer is activated, a maximum of six pictures can
be captured.
The pictures are automatically saved in Gallery.
You in the picture—self-timer
Use the self-timer to delay the taking of a picture so that
you can include yourself in the picture. To set the
self-timer delay, select Options > Activate self-timer >
10 seconds, 20 seconds, or 30 seconds. To activate the
self-timer, select Activate. The self-timer indicator ( )
blinks, and the device beeps when the timer is running.
The camera takes the picture after the selected delay has
elapsed. You can also use the Activate self-timer in the
sequence mode. See "Take pictures in a sequence‚" p. 37.
The flash
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover
the flash while taking a picture.
The camera has an LED flash for low light conditions. The
following flash modes are available: Automatic (),
Forced (), and Off ().
Select Options > Image setup > Flash > Forced to use
the flash.
If the flash is set to Off or Automatic during bright
conditions, the flash still emits a low light when an image
is captured. This allows the subject of the picture to see
when the picture is taken. There is no flash effect on the
resultant picture.
Adjust still image camera settings
There are two kinds of settings for the still image camera:
Image setup settings and main settings. To adjust Image
setup settings, see "Adjust color and lighting‚" p. 39. The
setup settings return to the default settings after you close
the camera, but the main settings remain the same until
you change them again. To change the main settings,
select Options > Settings and from the following:
Image quality—Print, E-mail, or MMS. The better the
image quality, the more memory the image consumes. The
quality of a zoomed picture is lower than that of a
non-zoomed picture. If you want to print the image, select
Print (resolution 1600x1200). If you want to send it
through e-mail, select E-mail (resolution 800x600). To
send the image through MMS, select MMS (resolution
640x480).
Resolution is a measure of sharpness and clarity of an
image. Resolution refers to the number of pixels in an
image. The more pixels, the more detailed the picture is,
and the more memory it consumes.
Camera and Gallery
39
Add to album—Select if you want to save the captured
image to a certain album in the gallery. If you select Yes, a
list of available albums opens.
Extended zoom—Select On to achieve maximum zoom.
Using this option may result in lower image resolution.
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures immediately.
Default video name—Select to define a name or select the
date.
Memory in use—Select where to store your images.
Adjust color and lighting
To enable the camera to reproduce colors and lighting
more accurately, or to add effects to your pictures or
videos, select Options > Image setup or Video setup, and
select from the following options:
Scene—Select a scene for the environment in which you
take pictures. See "Scenes‚" p. 39. Every scene uses its own
lighting settings that have been adjusted according to a
certain kind of environment.
Flash (images only)—Set the flash to Automatic, Forced,
or Off. See "The flash‚" p. 38.
White balance—Select the current lighting condition
from the list. This allows the camera to reproduce colors
more accurately.
Color tone—Select a color effect from the list.
The display changes to match any settings made, showing
you how the change affects the pictures or videos.
The settings return to the default settings when you close
the camera. If you select a new scene, the settings are
replaced by the settings of the selected scene. See
"Scenes‚" p. 39. If you need to change the setup settings,
you can change them after selecting a scene.
Scenes
A scene helps you to find the right color and lighting
settings for the current environment. Select a scene for
taking pictures or recording video clips from a scenes list.
The settings of each scene have been set according to a
certain style, or environment in which the pictures are
taken. Select Options > Image setup/Video setup >
Scene:
Video scenes
Normal ( )(default)—Use this scene in all conditions.
Night ( )—Use this scene in low light conditions.
Image scenes
Camera and Gallery
40
Automatic ( ) (default)—Use this scene in all
conditions.
User defined ( )—Use this scene to create a
personalized scene with your own flash, white balance,
and color tone settings.
Portrait ( )—Use this scene to take portrait pictures,
such as head shots and sitting poses.
Landscape ( )—Use this scene when you take pictures
of objects that are further away.
Night ( )—Use this scene in low light conditions.
Sports ( )—Use this scene to take pictures of fast
moving objects. When you use this scene, the resolution
of the images is reduced from 1600x1200 to 800x600.
See "Adjust still image camera settings‚" p. 38.
When taking pictures, the default scene is Automatic. If
you select the User defined scene, however, it is set as the
default scene.
To make your own scene suitable for a certain
environment, scroll to User defined scene and select
Options > Change. In the user scene you can adjust
Based on scene, Flash, White balance, Color tone, and
Reset user scene options. To copy the settings of another
scene, select Based on scene and the desired scene.
Edit images
To edit the pictures after taking them, or the ones already
saved in Gallery, select Options > Edit.
Select Apply effect to crop and rotate the image; adjust
the brightness, color, contrast, compression, and
resolution; and add effects, text, clip art, or a frame to the
picture.
To crop an image, select Options > Apply effect > Crop.
Select Manual to crop the image size manually, or select a
predefined aspect ratio from the list. If you select Manual,
a cross appears on the upper left corner of the image.
Scroll to select the area to crop, and select Set. Another
cross appears on the lower right corner. Select again the
area to be cropped, and select Crop.
To add clip art to an image, select Options > Apply
effect > Clip-art. Select the item you want to add from
the list, and press . To move, rotate, and change the size
of the item, select Options > Move, Resize, or Rotate.
To add text to an image, select Options > Apply effect >
Text. Enter the text, and select OK. To edit the text, select
Options > Move, Resize, Rotate, or Select color.
Shortcuts in the image editor:
• To view an image in full screen, press . To return to
the normal view, press again.
• To zoom in or out, press and .
Camera and Gallery
41
Record videos
To move between still image and video capture, select
Options > Image mode or Video mode. Open the Video
mode.
To make lighting and color adjustments before recording a
video, select Options > Video setup > Scene, White
balance, or Color tone. See "Adjust color and lighting‚"
p. 39.
To select a scene, select Options > Video setup > Scene.
See "Scenes‚" p. 39.
1Press to start recording. The record icon is
shown. The LED flash is lit, and a tone sounds,
indicating to the subject that video is being recorded.
There is no flash effect on the resultant video.
2To pause recording at any time, select Pause. The pause
icon blinks on the display. Video recording
automatically stops if recording is set to pause and
there are no keypresses within a minute.
3Select Continue to resume recording.
4Select Stop to stop recording. The video clip is
automatically saved to the Images & videofolder of
Gallery. See "Gallery‚" p. 44.
Video recorder indicators show the following:
• The device memory ( )
and memory card ( )
indicators (1) show where
the video is saved.
• The current video length
indicator (2) shows
elapsed time and time
remaining.
• The scene indicator (3)
shows the active scene.
See "Scenes‚" p. 39.
• The microphone indicator
(4) shows that the microphone is muted.
• The video quality indicator (5) shows the selected video
quality.
After a video clip is recorded:
• To immediately play the video clip you just recorded,
select Options > Play.
• If you do not want to keep the video, press .
• To return to the viewfinder to record a new video,
press .
• To send the video Via multimedia, Via e-mail, or Via
Bluetooth, select Options > Go to Gallery. Open the
video and press . For more information, see
"Messaging‚" p. 52 and "Bluetooth connection‚" p. 85.
This option is not available during an active call.
Camera and Gallery
42
• To edit the video, select Options > Edit. See "Edit
video clips‚" p. 42.
Video settings
There are two kinds of settings for the video recorder:
Video setup settings and main settings. To adjust Video
setup settings, see "Adjust color and lighting‚" p. 39. The
setup settings return to the default settings after you
close the camera, but the main settings remain the same
until you change them again. To change the main settings,
select Options > Settings and from the following:
Audio recording—Select On if you want to record both
image and sound.
Video quality—Set the quality of the video clip to High,
Normal, or Sharing. If you select High or Normal, the
length of the video recording is restricted by the available
space on your memory card, and up to 1 hour per clip. If
you want to view the video on a TV or PC, select High
video quality, which has CIF resolution (352x288) and the
.mp4 file format.
You cannot send video clips saved in the .mp4 format in a
multimedia message. If you want to view the clip in
mobile phones, select Normal, which has QCIF resolution
(176x144) and the .3gp file format. To send the video clip
through MMS, select Sharing (QCIF resolution, .3gp file
format).
The video clip is limited to 300 KB (about 20 seconds in
duration) so that it can be conveniently sent as a
multimedia message to a compatible device. Some
networks, however, may only support sending of
multimedia messages with a maximum size of 100 kB.
Contact your service provider for more information.
Add to album—Select whether you want to save the
recorded video clip to a certain album in Gallery. Select
Yes to open a list of available albums.
Show captured video—Select whether you want the
recorded video clip to play automatically after the
recording stops.
Default image name—Set a default name for the images
you are going to take. You can replace the date with your
own text.
Memory in use—Define the default memory store: device
memory or memory card.
Edit video clips
You can edit video clips in Gallery.
To edit video clips and create custom video clips, scroll to
a video clip, and select Options > Edit. To create custom
video clips, combine and trim video clips, and add images,
sound clips, transitions, and effects. Transitions are visual
Camera and Gallery
43
effects that you can add in the beginning and end of the
video or between the video clips.
In the video editor you can see two timelines: video clip
timeline and sound clip timeline. If you add images, text,
or transitions to a video clip, they are shown on the video
clip timeline. To move on the timelines, scroll left or right.
To switch between the timelines, scroll up or down.
Edit video, sound, image, text, and transitions
To create custom video clips, mark and select one or more
video clips, and select Options > Edit.
Press and to move between the video clip and the
sound clip.
To modify the video, select from the following options:
Edit video clip:
Cut—Trims the video clip in the Cut video clip view.
Add color effect—Inserts a color effect on the video clip.
Use slow motion—Slows the speed of the video clip.
Mute sound/Unmute sound—Mutes or unmutes the
original video clip sound.
Move—Moves the video clip to the selected location.
Remove—Removes the video clip from the video.
Duplicate—Makes a copy of the selected video clip.
Edit text (shown only if you have added text)—To move,
remove or duplicate text; change the color and style of the
text; define how long it stays on the screen; and add
effects to the text.
Edit image (shown only if you have added an image)—To
move, remove or duplicate an image; define how long it
stays on the screen; and set a background or a color effect
to the image.
Edit sound clip:
Cut—Trims the sound clip in the Cut sound clip view.
Move—Moves the sound clip to the selected location.
Remove—Removes the sound clip from the video.
Duplicate—Makes a copy of the selected sound clip.
Set duration—Changes the length of the sound clip.
Edit transition—There are
three types of transitions: at
the start of a video, at the
end of a video, and
transitions between video
clips. A start transition can
be selected when the first
transition of the video is
active.
Camera and Gallery
44
Insert:
Video clip—Inserts the selected video clip. A thumbnail of
the video clip is shown in the main view. A thumbnail
consists of the first nonblack view of the video clip. The
name and length of the selected video clip is also shown.
Image—Inserts the selected image. A thumbnail of the
image is shown in the main view.
Text—Inserts text to the video clip. You can insert a title,
subtitle, or credits.
Sound clip—Inserts the selected sound clip. The name and
length of the selected sound clip is shown in the main
view.
New sound clip—Records a new sound clip to the selected
location.
Movie—Preview the movie in the full screen mode or as a
thumbnail, save or send the movie, or cut the movie to a
proper size for sending it in a multimedia message.
To take a snapshot of a video clip, select Options > Take
snapshot in the thumbnail Preview view or in the Cut
video view.
To save your video, select Options > Movie > Save. To
define the Memory in use, select Options > Settings. The
default is the device memory.
In the Settings view, you can define Default video name,
Default sc. shot name, Resolution, and Memory in use.
Select Send > Via multimedia, Via e-mail, or Via
Bluetooth if you want to send the video. Contact your
service provider for details of the maximum multimedia
message size that you can send. If your video is too large
to send in a multimedia message, appears.
If you want to send a video clip that is over the maximum
multimedia message size allowed by your service provider,
you can send the clip using Bluetooth. See "Send data
using Bluetooth wireless technology‚" p. 86. You can also
transfer your videos using Bluetooth into a PC that has
Bluetooth wireless technology, or by using a memory card
reader (enhancement).
Gallery
To store and organize your images, video clips, sound clips,
playlists, and streaming links, press , and select Gallery.
To open the gallery from the Camera application, select
Options > Go to Gallery. In Camera, only the Images &
video folder is available.
Camera and Gallery
45
To switch from Gallery to the
camera, select Camera.
Select Images & video ,
Tracks , Sound clips ,
Links , or All files ,
and press to open it.
You can browse and open
folders; and mark, copy, and
move items to folders. Sound
clips, video clips, .ram files,
and streaming links are
opened and played in the RealPlayer application. See
"RealPlayer‚" p. 48. You can also create albums; and mark,
copy, and add items to albums. See "Albums‚" p. 46.
You can transfer images from your device to a compatible
PC with Nokia Phone Browser available in Nokia PC Suite.
See the CD-ROM, if supplied with your device.
Press to open a file. Videos, music, and sound clips
open in RealPlayer. See "View images and video clips‚"
p. 45.
To copy or move files to the memory card or to device
memory, select a file and Options > Organize > Copy to
memory card/Move to memory card or Copy to phone
mem./Move to phone mem.. Files stored on the memory
card are indicated with .
To download files into Gallery in one of the main folders
using the browser, select Graphic downls. or Video
downlds., Track downlds., or Sound downlds.. The
browser opens, and you can select a bookmark from which
the site can download.
View images and video clips
Pictures taken and video clips recorded with the camera
are stored in the Images & video folder in Gallery. The
quality of a video clip is indicated with one of the
following icons: (High), (Normal), and (Sharing).
Images and video clips can also be sent to you in a
multimedia message, as an e-mail attachment, or through
a Bluetooth connection. To be able to view a received
image or video clip in the gallery or in the media player,
you must save it in the device memory or on a memory
card.
Open the Images & video folder in Gallery. The images
and video clip files are in a loop, and ordered by date. The
number of files can be seen on the display. To browse the
files, scroll left or right. Press and hold or to
browse the files in a continuous loop.
To edit an image or a video clip, select Options > Edit. An
image editor or a video editor opens.
Camera and Gallery
46
To save memory space after you print or upload your
images, and still keep a small version of the image on your
device, select Options > Shrink.
To add an image or a video clip to an album in the gallery,
select Options > Add to album. See "Albums‚" p. 46.
To create custom video clips, select a video clip, or several
clips, in the gallery, and select Options > Edit. See "Edit
video clips‚" p. 42.
To print your images on a printer connected to your
device, or to store them on your MMC for printing, select
Options > Print. See "Image print‚" p. 47.
To zoom an image, select Options > Zoom in. The
zooming ratio is at the top of the display. The zooming
ratio is not stored permanently.
To delete an image or a video clip, press .
Slide show
Use Slide show to view images and video clips in the full
screen mode. Select from the following:
•Start—to start the slide show.
•Play—to open the RealPlayer application.
•Pause—to pause the slide show
•Continue—to resume the slide show
•End—to close the slide show.
Press (faster) or (slower) to adjust the Tempo. Press
(previous) or (next) to browse the thumbnails.
To add sound to the slide show, select Options > Slide
show > Music settings and from the following:
•Music—Select On or Off.
•Track—Select a music file from the list.
•Volume—Press to decrease the volume, or to
increase the volume.
Albums
With albums you can conveniently manage your images
and video clips. To view the albums list, in the
Images & video folder, select Options > Albums. The
albums are ordered alphabetically. To view the content of
an album, press .
To create a new album, select Options > New album. Enter
a name for the album, and select OK.
To add a picture or a video clip to an album in the gallery,
scroll to a picture or video clip, and select Options > Add
to album. A list of albums opens. Select the album to
which you want to add the picture or video clip, and press
.
To remove a file from an album, press . The file is not
deleted from the Images & video folder in Gallery.
Imaging
47
Imaging
Image print
To print images with Image print, select the print option
in the gallery, camera, image editor, or image viewer.
Use Image print to print your images using a USB cable, a
Bluetooth connection, or your memory card.
You can only print images that are in .jpeg format. The
pictures taken with the camera are automatically saved in
.jpg format.
To print to a PictBridge-compliant printer, select the print
option before you connect the USB cable.
Select the image you want to print and Options > Print.
Printer selection
When you use Image print for the first time, a list of
available printers is displayed after you select the image.
Select a printer you want to use. The printer is set as the
default printer.
If you have connected a PictBridge-compliant USB printer
using the CA-53 cable, the printer is automatically
displayed.
If the default printer is not available, a list of available
printing devices is displayed.
To change the default printer, select Options > Settings >
Default printer.
Print preview
The print preview view opens only when you start printing
an image in the gallery or the active standby mode.
The images that you selected are displayed using
predefined layouts. To change the layout, scroll left and
right through the available layouts for the selected
printer. If the images do not fit on a single page, scroll up
or down to display the additional pages.
Print settings
The available options vary, depending on the capabilities
of the printing device you selected.
To set a default printer, select Options > Default printer.
To select the paper size, select Paper size, the size of paper
from the list, and OK. Select Cancel to return to the
previous view.
Imaging
48
RealPlayer
Press , and select Imaging > RealPlayer. With
RealPlayer, you can play video clips, sound clips, and
playlists, or stream media files over the air. You can
activate a streaming link when you browse Web pages, or
store it in the device memory or memory card.
RealPlayer supports files with extensions such as .aac,
.awb, .m4a, .mid, .mp3, and .wav. However, RealPlayer
does not necessarily support all file formats or all the
variations of file formats. For example, RealPlayer
attempts to open all .mp4 files, but some .mp4 files may
include content that is not compliant with 3GPP
standards and, therefore, is not supported by this device.
You can transfer music files from your device to your
memory card with Nokia Audio Manager available in
Nokia PC Suite. See the CD-ROM, if supplied with your
device.
Play video or sound clips
1To play a media file stored in device memory, or on the
memory card, select Options > Open and select from
the following:
Most recent clips—To play one of the last six files
played in RealPlayer.
Saved clip—To play a file saved in Gallery. See
"Gallery‚" p. 44.
2Scroll to a file, and press to play the file.
To view a video clip in full screen mode, press . Press
again to change back to normal screen mode.
Icons in RealPlayer: —Repeat; —Random;
— Repeat and random; and —Loudspeaker muted.
Create a track list
To create a track list of the music tracks on your device
memory, or on the memory card:
1Select Options > New track list.
2Select the memory from which you want to select the
music tracks.
3Enter a name for the track list.
4Select the music tracks you want to include in the track
list.
5Select Back. The track list automatically starts to play.
To leave the application open and play music in the
background, press twice to return to the standby
mode. To return to the application, press , and select
RealPlayer.
Shortcuts during play:
• To fast forward, press and hold .
• To rewind through the media file, press and hold .
Imaging
49
• To mute the sound, press and hold until the
indicator is displayed. To turn on the sound, press and
hold until you see the indicator.
Stream content over the air
Many service providers require you to use an Internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
The access points may be configured when you first start
your device.
Contact your service provider for more information.
In RealPlayer, you can only open an rtsp:// URL address.
However, RealPlayer recognizes an http link to a .ram file.
To stream content over the air, select a streaming link
saved in Gallery, on a Web page, or received in a text
message or multimedia message. Before live content
begins streaming, your device connects to the site and
starts loading the content. The content is not saved in the
device.
Receive RealPlayer settings
You may receive RealPlayer settings in a special text
message from the network operator or service provider.
See "Data and settings‚" p. 58. For more information,
contact your network operator or service provider.
Change the RealPlayer settings
Select Options > Settings and from the following:
Video—To have RealPlayer automatically repeat video
clips after they finish playing.
Audio settings—To select if you want to repeat playing of
track lists and play sound clips on a track list in random
order.
Connection settings—To select whether to use a proxy
server, change the default access point, and set the
time-outs and port range used when connecting. Contact
your service provider for the correct settings.
Proxy settings:
Use proxy—To use a proxy server, select Yes.
•Proxy serv. address—Enter the IP address of the proxy
server.
•Proxy port number—Enter the port number of the
proxy server.
Proxy servers are intermediate servers between media
servers and their users. Some service providers use them to
provide additional security or speed up access to browser
pages that contain sound or video clips.
Network settings:
Default access point—Scroll to the access point you want
to use to connect to the Internet, and press .
Imaging
50
Online time—Set the time for RealPlayer to disconnect
from the network when you have paused a media clip
playing through a network link, select User defined, and
press . Enter the time, and select OK.
Lowest UDP port—Enter the lowest port number of the
servers port range. The minimum value is 6970.
Highest UDP port—Enter the highest port number of the
servers port range. The maximum value is 32000.
Select Options > Advanced settings to edit the
bandwidth values for different networks.
Movie director
To create muvees, press , and select Imaging > Movie.
Muvees are short, edited video clips that can contain
video, images, music, and text. Quick muvee is created
automatically by Movie director after you select the style
for the muvee. Movie director uses the default music and
text associated with the chosen style. Every style has its
own font style, color, music, and pace. In a Custom muvee
you can select your own video and music clips, images and
style, and add an opening and closing message. You can
send muvees with MMS.
Open Movie, and press or to move between the
and views. You can also return to the main
view from the view by selecting Done.
The view contains a list of video clips that you can
Play, Send, Rename, andDelete.
Create a quick muvee
1In the Movie main view, select Quick muvee.
2Select a style for the muvee from the style list. The
created muvee is saved in the Movie director muvee
list. The muvee is played automatically after saving.
To download new styles to your device, select Style
downlds. (network service) from the Movie director main
view.
Create a custom muvee
1In the Movie main view, select Custom muvee.
2Select the clips you want to include in your muvee in
Video, Image, Style, or Music.
After you select video clips and images, to define the
order in which the files are played in the muvee, select
Options > Advanced options. To select the file you
want to move, press the scroll key. Then scroll to the file
below which you want to place the marked file, and
press the scroll key.
Imaging
51
To cut the video clips, select Options> Select contents.
See "Select content‚" p. 51.
In Message you can add an opening and closing text to
a muvee.
3Select Create muvee. and from the following:
Multimedia message—to optimize the length of the
muvee for MMS sending.
Auto-select—to include all the selected pictures and
video clips in the muvee.
Same as music—to set the muvee duration to be the
same as the chosen music clip.
User defined—to define the length of the muvee.
4Select Options > Save.
To preview the custom muvee before saving it, in the
Preview muvee view, select Options > Play.
To create a new custom muvee by using the same style
settings, select Options > Recreate.
Select content
After you select images and video clips for your muvee, you
can edit the selected video clips. Select Options >
Advanced options > Options > Select contents. You can
select which parts of the video clip you want to include or
exclude in the muvee. A slider below the video screen
indicates the included, excluded, and neutralized parts
with colors: green is for included, red is for excluded, and
grey is for neutral parts.
To include a part of the video clip in the muvee, scroll to
the part, and select Options > Include.
To exclude a part from the video clip, scroll to the part, and
select Options > Exclude.
To let Movie director randomly include or exclude a part
of the video clip, scroll to the part, and select Options >
Mark as neutral.
To exclude a shot from the video clip, select Options >
Exclude shot.
To let Movie director randomly include or exclude parts
of the video clip, select Options > Mark all as neutral.
Settings
Select Settings to edit the following options:
Memory in use—Select where to store your muvees.
Resolution—Select the resolution of your muvees.
Default muvee name—Set a default name for the muvees.
Messaging
52
Messaging
Press , and select Messaging. In Messaging, you can
create, send, receive, view, edit, and organize text
messages, multimedia messages, e-mail messages, and
special text messages containing data. You can also
receive messages and data through a Bluetooth
connection, receive Web service messages, cell broadcast
messages, and send service commands.
Only devices that have compatible features can receive
and display multimedia messages. The appearance of a
message may vary depending on the receiving device.
When you open Messaging, you can see the New
message function and a list of folders:
Inbox—Contains received messages except e-mail
and cell broadcast messages. E-mail messages are stored
in the Mailbox.
My folders—For organizing your messages into
folders.
Mailbox—In Mailbox you can connect to your
remote mailbox to retrieve your new e-mail messages or
view your previously retrieved e-mail messages offline.
See "E-mail‚" p. 64.
Drafts—Stores draft messages that have not been
sent.
Sent—Stores the last 20 messages that have been
sent excluding messages sent using a Bluetooth
connection. To change the number of messages to be
saved, see "Other settings‚" p. 66.
Outbox—A temporary storage place for messages
waiting to be sent.
Reports (network service)—You can request the
network to send you a delivery report of the text messages
and multimedia messages you have sent. Receiving a
delivery report of a multimedia message that has been sent
to an e-mail address might not be possible.
When you have opened any of the default folders, to
switch between the folders, press or .
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options > Service
command in the main view of Messaging.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions from your service provider. For available topics
Messaging
53
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select Options > Cell
broadcast. In the main view you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
A packet data connection may prevent cell broadcast
reception.
Write text
Traditional text input
, , and indicate the selected character
mode. indicates number mode.
The indicator is displayed when you are writing text
using traditional text input.
• Press a number key ( — ) repeatedly until the
desired character appears. There are more characters
available for a number key than are printed on the key.
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press and
hold .
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
• To erase a character, press . Press and hold to
clear more than one character.
• The most common punctuation marks are available
under . Press repeatedly to reach the desired
punctuation mark.
Press to open a list of special characters. Use to
move through the list, and select a character.
• To insert a space, press . To move the cursor to the
next line, press three times.
• To switch between the different character modes,
press .
Predictive text input—Predictive text
You can enter any letter with a single keypress. Predictive
text input is based on a built-in dictionary to which you
can also add new words. When the dictionary becomes
full, the latest added word replaces the oldest.
1To activate predictive text
input, press , and
select Predictive text on.
This activates predictive
text input for all editors in
the device. is
displayed when you write
text using predictive text
input.
Messaging
54
2To write the desired word, press the keys — .
Press each key only once for one letter. For example, to
write “Nokia” when the English dictionary is selected,
press for N, for o, for k, for i, and
for a.
The word suggestion changes after each keypress.
3When you finish writing the word and it is correct, to
confirm it, press , or press to add a space.
If the word is not correct, press repeatedly to view
the matching words the dictionary has found one by
one, or press , and select Predictive text >
Matches.
If the ? character is shown after the word, the word
you intended to write is not in the dictionary. To add a
word to the dictionary, select Spell, enter the word
using traditional text input, and select OK. The word is
added to the dictionary. When the dictionary becomes
full, a new word replaces the oldest added word.
4Start writing the next word.
To set predictive text input on or off, press twice
quickly.
Tips on predictive text input
To erase a character, press . Press and hold to
clear more than one character.
To change between the different character modes, press
. If you press quickly twice, predictive text input is
turned off.
Predictive text input tries to guess which commonly used
punctuation mark (.,?!‘) is needed. The order and
availability of the punctuation marks depend on the
language of the dictionary.
To insert a number in letter mode, press and hold the
desired number key.
To switch between letter and number mode, press and hold
.
The most common punctuation marks are available under
. Press and then repeatedly to search for the
desired punctuation mark.
Press and hold to open a list of special characters.
Press repeatedly to view the matching words the
dictionary has found one by one.
Press , select Predictive text, and press to select
one of the following options:
Matches—To view a list of words that correspond to your
keypresses.
Insert word—To add a word to the dictionary by using
traditional text input. When the dictionary becomes full, a
new word replaces the oldest added word.
Messaging
55
Edit word—To edit the word using traditional text input.
This is available if the word is active (underlined).
When you press , the following options appear
(depending on the editing mode): Predictive text
(predictive text input), Alpha mode (traditional text input),
Number mode, Cut (if text has been selected), Copy (if
text has been selected), Paste (when text has been cut or
copied first), Insert number, Insert symbol, and Writing
language: (changes the input language for all editors in
the device).
Write compound words
Write the first half of a compound word; to confirm it,
press . Write the last part of the compound word. To
complete the compound word, press to add a space.
Turn predictive text input off
Press , and select Predictive text > Off to turn
predictive text input off for all editors in the device.
Copy text to clipboard
1To select letters and words, press and hold . At the
same time, press or . As the selection moves,
text is highlighted.
2To copy the text to the clipboard, while still holding
, select Copy.
3To insert the text into a document, press and hold ,
and select Paste, or press once, and select Paste.
To select lines of text, press and hold . At the same
time press or .
To remove the selected text from the document,
press .
Write and send messages
The appearance of a multimedia message may vary,
depending on the receiving device.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
You can start to create a message from any application
that has the option Send. Select a file (image or text) to
be added to the message, and select Options > Send.
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place. See "Receive MMS and e-mail settings‚" p. 57, and
"E-mail‚" p. 64.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
1Select New message. A list of message options opens.
Text message—to send a text message.
Messaging
56
Multimedia message—to send a multimedia message
(MMS).
E-mail—to send an e-mail. If you have not set up your
e-mail account, you are prompted to do so.
2Press to select recipients or groups from contacts,
or enter the recipient’s phone number or e-mail
address. Press to add a semicolon (;) that separates
the recipients. You can also copy and paste the
number or address from the clipboard.
Scroll to a contact, and press to mark it. You can
mark several recipients at a time.
3Press to move to the message field.
4Write the message.
5To add a media object to a multimedia message, select
Options > Insert object > Image, Sound clip, or
Video clip. When sound is added, is shown in
the navigation bar.
You cannot send video clips that are saved in the .mp4
format in a multimedia message. To change the format
in which recorded videos are saved, see "Video
settings‚" p. 42.
6To take a new picture or
record sound or video for
a multimedia message,
select Options > Insert
new > Image, Sound clip,
or Video clip. To insert a
new slide to the message,
select Slide.
Select Options > Preview
to see what the
multimedia message looks
like.
7To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, or Note. E-mail
attachments are indicated by in the navigation bar.
To send files other than sounds and notes as
attachments, open the appropriate application, and
select Options > Send > Via e-mail, if available.
8To send the message, select Options > Send, or
press .
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use
accents or other marks, and characters from some
language options like Chinese, take up more space limiting
the number of characters that can be sent in a single
message. In the navigation bar, you can see the message
Messaging
57
length indicator counting backwards. For example, 10 (2)
means that you can still add 10 characters for the text to
be sent as two messages.
E-mail messages are automatically placed in Outbox
before sending. If sending does not succeed, the e-mail is
left in the Outbox with the Failed status.
In Messaging you can also create presentations and send
them in a multimedia message. In the multimedia message
editor view, select Options > Create presentation (shown
only if MMS creation mode is set to Guided or Free). See
"Multimedia messages‚" p. 63.
When you send a multimedia message to an e-mail address
or a device that supports the receiving of large images, use
the larger image size. If you are not sure of the receiving
device, or the network does not support sending large files,
it is recommended that you use a smaller image size or a
sound clip that is no longer than 15 seconds. To change the
setting, select Options > Settings > Multimedia message
> Image size in the Messaging main view.
Receive MMS and e-mail settings
You may receive the settings in a text message from your
network operator or service provider. See "Data and
settings‚" p. 58.
For availability of and subscription to data services,
contact your network operator or service provider. Follow
the instructions given by your service provider.
Enter the MMS settings manually:
1Select Tools > Settings > Connection > Access
points, and define the settings for a multimedia
messaging access point. See "Connection settings‚"
p. 98.
2Select Messaging > Options > Settings > Multimedia
message > Access point in use and the access point
you created to be used as the preferred connection.
See also "Multimedia messages‚" p. 63.
Before you can send, receive, retrieve, reply to, and
forward e-mail, you must do the following:
• Configure an Internet access point (IAP) correctly. See
"Connection settings‚" p. 98.
• Define your e-mail settings correctly. See "E-mail‚"
p. 64. You need to have a separate e-mail account.
Follow the instructions given by your remote mailbox
and Internet service provider (ISP).
Inbox—receive messages
Messaging
58
Inbox icons: —unread messages in Inbox; —
unread text message; —unread multimedia message;
—data received through a Bluetooth connection.
When you receive a message, and 1 new message
are shown in the standby mode. Select Show to open the
message. To open a message in Inbox, scroll to it, and
press .
Multimedia messages
Important: Exercise caution when opening
messages. Multimedia message objects may
contain malicious software or otherwise be
harmful to your device or PC.
You may receive a notification that you have received a
multimedia message that is saved in the multimedia
message center. To start a packet data connection to
retrieve the message to your device, select Options >
Retrieve.
When you open a multimedia message ( ), you may see
an image and a message, and simultaneously listen to a
sound through the loudspeaker ( is shown if sound is
included). Click the arrow in the icon to listen to the
sound.
To see what kinds of media objects have been included in
the multimedia message, open the message, and select
Options > Objects. You can choose to save a multimedia
object file in your device or send it, for example, through a
Bluetooth connection to another compatible device.
To view received multimedia presentations, select
Options > Play presentation.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Data and settings
Your device can receive many kinds of text messages that
contain data ( ), also called over-the-air (OTA)
messages:
Configuration message—You may receive a text message
service number, voice mailbox number, Internet access
point settings, access point login script settings, or e-mail
settings from your network operator, service provider, or
company information management department in a
configuration message. To save the settings, select
Options > Save all.
Business card—To save the information to Contacts, select
Options > Save business card. Certificates or sound files
attached to the business card are not saved.
Ringing tone—To save the ringing tone, select Options >
Save.
Messaging
59
Operator logo—For the logo to be shown in the standby
mode instead of the network operator’s own identification,
select Options > Save.
Calendar entry—To save the invitation, select Options >
Save to Calendar.
Web message—To save the bookmark to the bookmarks
list in Web, select Options > Add to bookmarks. If the
message contains both access point settings and
bookmarks, to save the data, select Options > Save all.
E-mail notification—Tells you how many new e-mails you
have in your remote mailbox. An extended notification
may list more detailed information.
If you receive a vCard file that has a picture attached, the
picture is saved to contacts.
Web service messages
Web service messages ( ) are notifications (for example,
news headlines) and may contain a text message or a link.
For availability and subscription, contact your service
provider.
My folders
In My folders, you can organize your messages into
folders, create new folders, and rename and delete folders.
You can use texts in the templates folder to avoid
rewriting messages that you send often.
Mailbox
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. See "E-mail‚" p. 64.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
Open the mailbox
When you open the mailbox, you can choose whether you
want to view the previously retrieved e-mail messages and
e-mail headings offline or connect to the e-mail server.
When you scroll to your mailbox, and press , the device
asks you if you want to Connect to mailbox?.
Select Yes to connect to your mailbox, and retrieve new
e-mail headings or messages. When you view messages
online, you are continuously connected to a remote
mailbox using a packet data connection. See also
"Connection settings‚" p. 98.
Messaging
60
Select No to view previously retrieved e-mail messages
offline. When you view e-mail messages offline, your
device is not connected to the remote mailbox.
Retrieve e-mail messages
If you are offline, select Options > Connect to start a
connection to a remote mailbox.
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device
or PC.
1When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail.
New—to retrieve all new e-mail messages to your
device.
Selected—to retrieve only the e-mail messages that
have been marked.
All—to retrieve all messages from the mailbox.
To stop retrieving messages, select Cancel.
2After you retrieve the e-mail messages, you can
continue viewing them online, or select Options >
Disconnect to close the connection and view the
e-mail messages offline.
E-mail status icons:
New e-mail (offline or online mode): the content
has not been retrieved to your device.
New e-mail: the content has been retrieved to your
device.
The e-mail message has been read.
The e-mail heading has been read and the message
content has been deleted from the device.
3To open an e-mail message, press . If the e-mail
message has not been retrieved (arrow in the icon is
pointing outwards) and you are offline, you are asked if
you want to retrieve this message from the mailbox.
To view e-mail attachments, open a message that has the
attachment indicator , and select Options >
Attachments. If the attachment has a dimmed indicator,
it has not been retrieved to the device; select Options >
Retrieve. In the Attachments view, you can retrieve, open,
save, or remove attachments. You can also send
attachments using a Bluetooth connection.
If your mailbox uses the IMAP4 protocol, you can define
how many messages to retrieve, and whether to retrieve
the attachments. With the POP3 protocol, the options are
Headers only, Partially (kB), or Msgs. & attachs..
Retrieve e-mail messages automatically
To retrieve messages automatically, select Options >
E-mail settings > Automatic retrieval > Header
retrieval. Select Always on, or Only in home net., and
define when, and how often, the messages are retrieved.
Messaging
61
Retrieving e-mail messages automatically may increase
your call costs due to the data traffic.
Delete e-mail messages
To delete the contents of an e-mail message from the
device while still retaining it in the remote mailbox, select
Options > Delete. In Delete msg. from:, select Phone
only.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your device to the remote mailbox again
to update the status.
To copy an e-mail from the remote mailbox to a folder
under My folders, select Options > Copy to folder, a
folder from the list, and OK.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete. In Delete msg. from:,
select Phone and server.
If you are offline, the e-mail is deleted first from your
device. During the next connection to the remote mailbox,
it is automatically deleted from the remote mailbox. If you
are using the POP3 protocol, messages marked to be
deleted are removed only after you have closed the
connection to the remote mailbox.
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Undelete.
Disconnect from the mailbox
When you are online, select Options > Disconnect to end
the packet data connection to the remote mailbox.
If you leave your mailbox connection open, the new
e-mails (Headers only as default) will be retrieved from
the remote mailbox to your device automatically (only if
the IMAP IDLE function is supported by your server). To
leave the messaging application open in the background,
press twice. Leaving the connection open may
increase your call costs due to the data traffic.
View e-mail messages when offline
When you open Mailbox the next time and you want to
view and read the e-mail messages offline, answer No to
the Connect to mailbox? query. You can read the
previously retrieved e-mail headings, the retrieved e-mail
messages, or both. You can also write new, reply to, or
forward e-mail to be sent the next time you connect to
the mailbox.
Messaging
62
Outbox—messages
waiting to be sent
Outbox is a temporary storage place for messages waiting
to be sent.
Status of the messages in Outbox:
Sending—A connection is being made and the message is
being sent.
Waiting/Queued—The message will be sent when
previous messages of a similar type have been sent.
Resend at %U (time)—The device will try to send the
message again after a time-out period. Select Options >
Send to restart the sending immediately.
Deferred—You can set documents to be on hold while
they are in Outbox. Scroll to a message that is being sent,
and select Options > Defer sending.
Failed—The maximum number of sending attempts has
been reached. Sending has failed. If you were trying to
send a text message, open the message, and check that
the sending options are correct.
Messages are placed in the outbox, for example, when
your device is outside network coverage. You can also
schedule e-mail messages to be sent the next time you
connect to your remote mailbox.
View messages on a SIM card
Before you can view SIM messages, you must copy them to
a folder in your device.
1In the Messaging main view, select Options > SIM
messages.
2Select Options > Mark/Unmark > Mark or Mark all to
mark messages.
3Select Options > Copy. A list of folders opens.
4Select a folder and OK to start copying. Open the folder
to view the messages.
Messaging settings
Text messages
Select Messaging > Options > Settings > Text message.
Message centers—Lists all the text message centers that
have been defined.
Msg. center in use—Select which message center is used
for delivering text messages.
Receive report (network service)—To request the network
to send delivery reports on your messages. When set to No,
only the Sent status is shown in the log. See "Log‚" p. 30.
Message validity—If the recipient of a message cannot be
reached within the validity period, the message is removed
Messaging
63
from the text message center. The network must support
this feature. Maximum time is the maximum amount of
time allowed by the network.
Message sent as—Change this option only if you are sure
that your message center is able to convert text messages
into these other formats. Contact your network operator.
Preferred connection—You can send text messages
through the normal GSM network or through packet data,
if supported by the network. See "Connection settings‚"
p. 98.
Reply via same ctr. (network service)—Select Yes, if you
want the reply message to be sent using the same text
message center number.
Add a new text message center
1Select Message centers > Options > New msg.
center.
2Press , write a name for the message center, and
select OK.
3Press and , and write the number of the text
message center. You receive the number from your
service provider.
4Select OK.
5To use the new settings, go back to the settings view.
Scroll to Msg. center in use, and select the new
message center.
Multimedia messages
Select Messaging > Options > Settings > Multimedia
message.
Image size—Define the size of the image in a multimedia
message. The options are Original (shown only when the
MMS creation mode is set to Guided or Free), Small, and
Large. Select Original to increase the size of the
multimedia message.
MMS creation mode —If you select Guided, the device
informs you if you try to send a message that may not be
supported by the recipient. Select Restricted; the device
prevents you from sending messages that are not
supported.
Access point in use (Must be defined)—Select which
access point is used as the preferred connection for the
multimedia message center.
Multimedia retrieval—Select how you want to receive
multimedia messages. To receive multimedia messages
automatically in your home network, select Aut. in home
network. Outside your home network, you receive a
notification that you have received a multimedia message
that is saved in the multimedia message center. You can
select if you want to retrieve the message to your device.
When you are outside your home network, sending and
receiving multimedia messages may cost you more.
Messaging
64
If you select Multimedia retrieval > Always automatic,
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home network.
Allow anon. messages—Select No if you want to reject
messages from an anonymous sender.
Receive ads—Define whether you want to receive
multimedia message advertisements.
Receive report (network service)—Select Yes if you want
the status of the sent message to be shown in the log.
Receiving a delivery report of a multimedia message that
has been sent to an e-mail address might not be possible.
Deny report sending—Select Yes if you do not want your
device to send delivery reports of received multimedia
messages.
Message validity—If the recipient of a message cannot be
reached within the validity period, the message is
removed from the multimedia messaging center. The
network must support this feature. Maximum time is the
maximum amount of time allowed by the network.
You may also obtain the multimedia and e-mail settings
from your service provider through a configuration
message. Contact your service provider for more
information. See "Data and settings‚" p. 58.
E-mail
Select Messaging > Options > Settings > E-mail, or in
the mailbox main view, select Options > E-mail settings
and from the following:
Mailbox in use—Select which mailbox you want to use for
sending e-mail.
Mailboxes—Opens a list of mailboxes that have been
defined. If no mailboxes have been defined, you are
prompted to do so. Select a mailbox to change the
following settings: Mailbox settings, User settings, and
Automatic retrieval.
Mailbox settings:
Mailbox name—Enter a descriptive name for the mailbox.
Access point in use (Must be defined)—Choose an
Internet access point (IAP) for the mailbox. See
"Connection settings‚" p. 98.
My e-mail address (Must be defined)—Enter the e-mail
address given to you by your service provider. Replies to
your messages are sent to this address.
Outgoing mail server (Must be defined)—Enter the IP
address or host name of the mail server that sends your
e-mail. You may only be able to use the outgoing server of
your network operator. Contact your service provider for
more information.
Messaging
65
Send message—Define how e-mail is sent from your
device. Select Immediately for the device to connect to the
mailbox when you select Send message. If you select
When conn. avail., e-mail is sent when the connection to
the remote mailbox is available.
User name—Enter your user name, given to you by your
service provider.
Password:—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server (Must be defined)—Enter the IP
address or host name of the mail server that receives your
e-mail.
Mailbox type:—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically in online
mode. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
Security (ports)—Used with the POP3, IMAP4, and SMTP
protocols to secure the connection to the remote mailbox.
APOP secure login (not shown if IMAP4 is selected for
Mailbox type)—Used with the POP3 protocol to encrypt
the sending of passwords to the remote e-mail server
while connecting to the mailbox.
User settings:
E-mails to retrieve (not shown if the e-mail protocol is
set to POP3)—Define how many new e-mails are retrieved
to the mailbox.
Retrieve (not shown if the e-mail protocol is set to
IMAP4)—Define which parts of the e-mails are retrieved:
Headers only, Partially (kB), or Msgs. & attachs..
Retrieve attachments (not shown if the e-mail protocol
is set to POP3)—Choose whether you want to retrieve
e-mail with or without attachments.
Subscribed folders (not shown if the e-mail protocol is
set to POP3)—You can subscribe to other folders in the
remote mailbox and retrieve content from those folders.
Send copy to self—Select Yes to save a copy of the e-mail
to your remote mailbox and to the address defined in My
e-mail address.
Include signature—Select Yes if you want to attach a
signature to your e-mail messages.
My name—Enter your own name here. Your name replaces
your e-mail address in the recipient’s device when the
recipient’s device supports this function.
Automatic retrieval:
Messaging
66
Header retrieval—When this function is on, messages are
retrieved automatically. You can define when, and how
often, the messages are retrieved.
Activating Header retrieval may increase your call costs
due to the data traffic.
Web service messages
Select Messaging > Options > Settings > Service
message. Choose whether you want to receive service
messages. If you want to set the device to automatically
activate the browser and start a network connection to
retrieve content when you receive a service message,
select Download messages > Automatically.
Cell broadcast
Check the available topics and related topic numbers with
your service provider, and select Messaging > Options >
Settings > Cell broadcast to change the settings.
Reception—Choose whether you want to receive cell
broadcast messages.
Language—All allows you to receive cell broadcast
messages in all supported languages. Selected allows you
to choose in which languages you want to receive cell
broadcast messages. If you cannot find the desired
language, select Other.
Topic detection—If you set Topic detection > On, the
device automatically searches for new topic numbers, and
saves the new numbers without a name to the topic list.
Select Off if you do not want to save new topic numbers
automatically.
Other settings
Select Messaging > Options > Settings > Other.
Save sent messages—Choose if you want to save a copy of
every text message, multimedia message, or e-mail that
you send to the Sent folder.
No. of saved msgs.—Define how many sent messages are
saved to the Sent folder at a time. The default limit is 20
messages. When the limit is reached, the oldest message is
deleted.
Memory in use—Choose the memory where you want to
save your messages: Phone memory or Memory card.
If Memory card is selected, activate the offline profile
before opening the memory card slot door or removing the
memory card. When the memory card is not available,
messages are saved in the device memory.
New e-mail alerts—Choose whether you want to receive
the new e-mail indications, a tone or a note, when new
mail is received to the mailbox.
Radio
67
Radio
You can use the Visual RadioTM application as a traditional
FM radio with automatic tuning and saved stations, or
with parallel visual information related to the radio
program on the display, if you tune in to stations that offer
Visual Radio service. The Visual Radio service uses packet
data (network service). You can listen to the FM radio
while using other applications.
To use the Visual Radio service, the following conditions
are required:
• The device must be switched on.
• The device must have a valid SIM card inserted.
• The station you listen to and the network operator you
use must support this service.
• An Internet access point must be defined to access the
operator’s Visual Radio server.
• The station must be saved in the station list, and it
must have the correct Visual Radio service ID defined
and Visual Radio service enabled. See "Saved stations‚"
p. 69.
If you do not have access to the Visual Radio service, the
operators and radio stations in your area may not support
Visual Radio. The Visual Radio service may not be available
in all areas and countries.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
You can listen to the radio with the built-in loudspeaker
or a compatible headset. When using the loudspeaker,
keep the headset plugged in the device.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage
your hearing. Do not hold the device near your ear
when the loudspeaker is in use, because the
volume may be extremely loud.
You can normally make a call or answer an incoming call
while listening to the radio. The radio is turned off when
there is an active call. When the call is finished, you may
need to turn the radio back on manually.
The radio selects the used frequency band based on the
country information received from the network. If this
information is not available, you may be asked to select
the region you are located in, or you can select the region
in the Visual Radio settings.
Radio
68
Listen to the radio
The quality of the radio broadcast depends on the
coverage of the radio station in that particular area.
Connect a compatible headset to the device. The lead of
the headset functions as the radio antenna, so let it hang
freely. Press , and select Radio.
To start a station search, select or . Searching
stops when a station is found. To change the frequency
manually, select Options > Manual tuning.
If you have previously saved radio stations, select or
to go to the next or previous saved station, or press
the corresponding number key to select the memory
location of a station.
To adjust the volume, press or . To listen to the
radio using the loudspeaker, select Options > Activate
loudsp..
To view available stations based on location, select
Options > Station directory (network service). -ICON-
indicates a station with Visual Radio service.
To save the current tuned station to your station list,
select Options > Save station. To open the list of your
saved stations, select Options > Stations. See "Saved
stations‚" p. 69.
To return to the standby mode and leave the FM radio
playing in the background, select Options > Play in
background.
View visual content
Visual content of a station with Visual Radio service can be
viewed if the station is saved in the station list and visual
service is enabled for it in the station details. See "Saved
stations‚" p. 69.
To check availability and costs, and to subscribe to the
service, contact your network operator or service provider.
To view available visual content for a tuned station, select
or Options > Start visual service. If the visual service
ID has not been saved for the station, enter it, or select
Retrieve to search for it in the station directory (network
service).
When the connection to the visual service is established,
the display shows the current visual content designed by
the content provider.
To adjust display settings for the visual content view,
select Options > Display settings > Lighting or Pwr.
saver time-out.
Radio
69
Saved stations
You can save up to 20 radio stations in Visual Radio. To
open your station list, select Options > Stations.
To listen to a saved station, select Options > Station >
Listen. To view available visual content for a station with
Visual Radio service, select Options > Station > Start
visual service.
To change station details, select Options > Station > Edit.
Settings
Select Options > Settings and from the following:
Start-up tone—Select if a tone is played when the
application is started.
Auto-start service—Select Yes to have the Visual Radio
service start automatically when you select a saved station
that offers visual service.
Access point—Select the access point used for the data
connection. You do not need an access point to use the
application as an ordinary FM radio.
Current region—Select the region you are currently
located in. This setting is displayed only if there was no
network coverage when the application was started.
Calendar
70
Calendar
Press any key ( — ) in any calendar view. A meeting
entry opens, and the characters you enter are added to the
Subject field.
Regularly back up the information on the device to the
memory card. You can restore the information, such as
calendar entries, to the device later. See "Memory card
tool‚" p. 22.
Create calendar entries
1Press , and select
Calendar > Options >
New entry and from the
following:
Meeting—To remind you
of an appointment that
has a specific date and
time.
Memo—To write a
general entry for a day.
Anniversary—To remind
you of birthdays or
special dates. Anniversary entries are repeated every
year.
2Fill in the fields. Use to move between fields.
Alarm (meetings and anniversaries)—Select On, and
press to fill in the Alarm time and Alarm date
fields. in the day view indicates an alarm.
Repeat—Press to change the entry to be repeating
( is shown in the day view).
Repeat until—You can set an end date for the repeated
entry.
Synchronization:
Private—After synchronization the calendar entry can
be seen only by you, and is not shown to others with
online access to view the calendar.
Public—The calendar entry is shown to others who have
access to view your calendar online.
None—The calendar entry will not be copied to your PC
when you synchronize.
3To save the entry, select Done.
To stop a calendar alarm, select Silence to turn off the
calendar alarm tone. The reminder text stays on the screen.
Select Stop to end the calendar alarm. Select Snooze to
set the alarm to snooze.
Calendar
71
To send a calendar note to a compatible device, select
Options > Send > Via text message, Via multimedia, or
Via Bluetooth.
You can move calendar and to-do data from many
different Nokia devices to your device or synchronize your
calendar and to-do to a compatible PC using Nokia PC
Suite. See the CD-ROM, if supplied in the sales package.
Set a calendar alarm
You can set an alarm to remind you of meetings and
anniversaries.
1Open an entry in which you want to set an alarm, and
select Alarm > On.
2Set the Alarm time and Alarm date.
3Scroll down to Repeat, and press to select how
often you want the alarm to be repeated.
4Select Done.
To delete a calendar alarm, open the entry in which you
want to delete an alarm, and select Alarm > Off.
Calendar views
Select Options > Settings to change the starting day of
the week or the view that is shown when you open the
calendar.
In the month view, dates that have calendar entries are
marked with a small triangle in the right bottom corner. In
the week view, memos and anniversaries are placed before
8 o’clock. Press to switch between the month view,
the week view, and the day view.
Icons in the day and week views: Memo and
Anniversary. There is no icon for Meeting.
To go to a certain date, select Options > Go to date, write
the date, and select OK.
Press to jump to today.
Remove calendar entries
Removing past entries in Calendar saves space in your
device memory.
To remove more than one event at a time, go to the month
view, and select Options > Delete entry and one of the
following:
Before date—Deletes all calendar entries that take place
before a certain date you define.
All entries—Deletes all calendar entries.
Calendar
72
Calendar settings
To modify the Calendar alarm tone, Default view, Week
starts on, and Week view title, select Options >
Settings.
Web
73
Web
Various service providers maintain pages specifically
designed for mobile devices. To access these pages, press
, and select Web. These pages use the wireless markup
language (WML), extensible hypertext markup language
(XHTML), or hypertext markup language (HTML).
Check the availability of services, pricing, and tariffs with
your network operator or service provider. Service
providers will also give you instructions on how to use their
services.
To start a connection, press and hold in the standby
mode.
Access the Web
• Save the settings that are needed to access the Web
page that you want to use. See "Receive browser
settings‚" p. 73 or "Enter the settings manually‚" p. 73.
• Make a connection to the Web. See "Make a
connection‚" p. 74.
• Start browsing the pages. See "Browse‚" p. 75.
• End the connection to the Web. See "End a
connection‚" p. 77.
Receive browser settings
Settings may be available on the Web site of a network
operator or service provider.
You may receive Web service settings in a special text
message from the network operator or service provider
that offers the Web page. See "Data and settings‚" p. 58.
For more information, contact your network operator or
service provider.
Enter the settings manually
Follow the instructions given to you by your service
provider.
1Select Tools > Settings > Connection > Access
points, and define the settings for an access point. See
"Connection settings‚" p. 98.
2Select Web > Options > Bookmark manager > Add
bookmark. Write a name for the bookmark and the
address of the page defined for the current access
point.
3To set the created access point as the default access
point in Web, select Web > Options > Settings >
Access point.
Web
74
Bookmarks view
A bookmark consists of an Internet address (mandatory),
bookmark title, access point, and if the Web page requires,
a user name and password.
Your device may have some bookmarks loaded for sites
not affiliated with Nokia. Nokia does not warrant or
endorse these sites. If you choose to access them, you
should take the same precautions, for security or content,
as you would with any Internet site.
Icons in the bookmark view:
The starting page defined for the default access
point. If you use another default access point for
browsing, the starting page changes accordingly.
The automatic bookmarks folder contains bookmarks
( ) that are collected automatically when you browse
pages. The bookmarks in this folder are automatically
organized according to domain.
Any bookmark showing the title or Internet address of
the bookmark.
Add bookmarks manually
1In the bookmarks view, select Options > Bookmark
manager > Add bookmark.
2Start to fill in the fields. Only the URL address must be
defined. The default access point is assigned to the
bookmark if no other one is selected. Press to enter
special characters such as /, ., :, and @. Press to
clear characters.
3Select Options > Save to save the bookmark.
Send bookmarks
Scroll to a bookmark, and select Options > Send > Via
text message. Press to send. It is possible to send
more than one bookmark at the same time.
Make a connection
After you store all the required connection settings, you
can access the pages.
1Select a bookmark or enter the address in the field ( ).
When you enter the address, matching bookmarks are
shown above the field. Press to select a matching
bookmark.
2Press to start to download the page.
Connection security
If the security indicator is displayed during a
connection, the data transmission between the device and
the Internet gateway or server is encrypted.
Web
75
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Select Options > Details > Security to view details about
the connection, encryptions status, and information about
server and user authentication.
Security features may be required for some services, such
as banking services. For such connections you need
security certificates. For more information, contact your
service provider. See also "Certificate management‚"
p. 102.
Browse
Important: Use only services that you trust and
that offer adequate security and protection against
harmful software.
On a browser page, new links appear underlined in blue
and images that act as links have a blue border around
them.
To open a link and make selections, press .
Use to jump to the end of a page and to the
beginning of a page.
To go to the previous page while browsing, select Back. If
Back is not available, select Options > Navigation
options > History to view a chronological list of the pages
you have visited during a browsing session. The history list
is cleared each time a session is closed.
To retrieve the latest content from the server, select
Options > Navigation options > Reload.
To save a bookmark, select Options > Save as bookmark.
To access the bookmarks view while browsing, press and
hold . To return to the browser view, select Options >
Back to page.
To save a page while browsing, select Options >
Advanced options > Save page. You can save pages
either to the device memory or on a memory card, and
browse them when offline. To access the pages later, press
in the bookmarks view to open the Saved pages view.
To enter a new URL address, select Options > Navigation
options > Go to web address.
To open a sublist of commands or actions for the currently
open page, select Options > Service options.
You can download files that cannot be shown on the
browser page, such as ringing tones, images, operator
logos, themes, and video clips. To download an item, scroll
to the link, and press .
Web
76
When you start a download, a list of ongoing, paused, and
completed downloads from the current browsing session
is displayed. You can also view the list by selecting
Options > Tools > Downloads. In the list, scroll to an
item, and select Options to pause, resume, or cancel
ongoing downloads, or open, save, or delete completed
downloads.
Downloaded items are handled by the respective
applications in your device, for example, a downloaded
image is saved in Gallery.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Important: Only install and use applications and
other software from sources that offer adequate
security and protection against harmful software.
Your browser collects bookmarks automatically while you
are browsing Web pages. The bookmarks are stored to the
automatic bookmarks folder ( ) and automatically
organized according to domain. See also "Web settings‚"
p. 77.
View saved pages
If you regularly browse pages containing information that
does not change very often, you can save and browse
them when offline. In the saved pages view you can also
create folders to store your saved browser pages.
To open the saved pages view, press in the bookmarks
view. In the saved pages view, press to open a saved
page ( ).
To save a page while browsing, select Options > Advanced
options > Save page.
To start a connection to the browser service and to
download the latest version of the page, select Options >
Navigation options > Reload. The device stays online after
you reload the page.
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can be
provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
device, for example, a downloaded photo can be saved in
Gallery.
Important: Only install and use applications and
other software from sources that offer adequate
security and protection against harmful software.
1To download the item, scroll to the link, and press .
2Select the appropriate option to purchase the item, for
example, “Buy.”
Web
77
3Carefully read all the information provided.
To continue the download, select Accept. To cancel the
download, select Cancel.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
End a connection
Select Options > Advanced options > Disconnect to end
the connection and view the browser page offline, or
Options > Exit to end the connection and close the
browser.
Empty the cache
The information or services you have accessed are stored in
the cache memory of the device.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
accessed are stored in the cache. To empty the cache,
select Options > Advanced options > Clear cache.
Web settings
Select Options > Settings and from the following:
Access point—To change the default access point, press
to open a list of available access points. See
"Connection settings‚" p. 98.
Show images—To select if you want to load images while
browsing. If you select No, to load images later during
browsing, select Options > Show images.
Font size—To choose the text size.
Default encoding—If text characters are not shown
correctly, you may choose another encoding according to
language.
Automatic bookmarks—To disable automatic bookmark
collecting, select Off. If you want to continue collecting
automatic bookmarks but hide the folder from the
bookmarks view, select Hide folder.
Screen size—To select what is shown when you are
browsing. Select Select. keys only or Full screen.
Homepage—To define the home page.
Search page—To define a Web page that is downloaded
when you select Options > Navigation options > Open
search page in the bookmarks view, or when browsing.
Web
78
Volume—If you want the browser to play sounds
embedded on Web pages, select a volume level.
Rendering—If you want the page layout shown as
accurately as possible when in Small screen mode, select
By quality. If you do not want external cascading style
sheets to be downloaded, select By speed.
Cookies—To enable or disable the receiving and sending
of cookies.
Cookies are a means of content providers to identify users
and their preferences for frequently used content.
Java/ECMA script—To enable or disable the use of scripts.
Security warnings—To hide or show security
notifications.
Serial no. sending—Serial no. sending—To enable or
disable serial number sending. Some service providers may
require that you enable this function before Web
browsing is possible.
Confirm touch tones—Choose whether you want to
confirm before the device sends touch tones during a
voice call. See also "Options during a call‚" p. 29.
My own
79
My own
Games
Press , and select My own and a game. For instructions
on how to play the game, select Options > Help.
Music player
Press , and select My own > Music. With the music
player, you can play music files and create and listen to
playlists.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage
your hearing. Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
All songs lists all music on the memory card in
alphabetical order. Recently added lists all music on the
memory card, with the most recently added shown first.
To view songs sorted by their album or artist, select
Albums or Artists. The album and artist information is
collected from the ID3 tags of the song files, if available.
Add music
To add music to the player, copy music files to your
memory card. Press , and select My own > Music >
Options > Update Collection.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
After you add or remove music files from the memory card,
you may need to update your music player collection.
Select Options > Update Collection. Depending on the
number of music files and the size of the memory, the
update may take a few seconds.
Play music
To play music, select All songs, Artists, Albums, Recently
added, or Playlists, and select a song. The selected song
and other songs in the view start to play.
To change between play and pause, press the scroll key. To
fast forward in a song, press and hold . To rewind, press
and hold .
To adjust the volume, press or . To start playing the
next or previous song, press or .
My own
80
To select between random play and normal play mode,
select Options > Shuffle. To choose whether playing
stops at the end of the playlist or restarts from the
beginning of the playlist, select Options > Repeat.
To search for songs in a song list, press the number keys
to enter letters in the search box.
To select several songs for playlists or deletion, press and
hold while you press or .
To delete songs, select them, and press . Deleting a
song removes it permanently from the memory card.
Playlists
The music player supports .m3u simple playlists. Playlists
can be copied with music files or you can create them in
the music player.
To add songs, albums, or artists to a playlist, select the
items and Options > Add to a playlist. You can create a
new playlist or add to an existing one.
To listen to a playlist, select Playlists and a playlist.
To delete a playlist, scroll to it, and press . Deleting a
playlist only deletes the playlist, not the music files.
Go to—add shortcuts
Default shortcuts: opens Calendar; opens Inbox;
opens Notes.
To store shortcuts (links to your favorite images, notes,
bookmarks, and so on), press , and select My own > Go
to. Shortcuts are added only from the individual
applications, for example, Gallery. Not all applications
have this function.
1Select an item from an application to which you want
to add a shortcut.
2Select OptionsAdd to 'Go to'. A shortcut in Go to is
automatically updated if you move the item to which it
is pointing (for example, from one folder to another).
To change the identifier in the lower left corner of the
shortcut icon, select Options > Shortcut icon.
Delete a shortcut
Select the shortcut, and press . The default shortcuts
Notes, Calendar, and Inbox cannot be deleted.
When you remove an application or a document which has
a shortcut in Go to, the shortcut icon of the removed item
is dimmed in the Go to view. The shortcut can be deleted
next time you start Go to.
My own
81
IM—instant messaging
(chat)
Press , and select My own > IM.
Instant messaging (network service) allows you to
converse with other people using instant messages and
join discussion forums (IM groups) with specific topics.
Various service providers maintain IM servers that you can
log in to once you have registered to an IM service.
Select Conversations to start or continue a conversation
with an IM user; IM contacts to create, edit, or view the
online status of your IM contacts; IM groups to start or
continue a group conversation with multiple IM users; or
Recorded chats to view a previous instant messaging
session that you have saved.
Check the availability of chat services, pricing, and tariffs
with your network operator and/or service provider.
Service providers will also give you instructions on how to
use their services.
Receive IM settings
You must save the settings to access the service that you
want to use. You may receive the settings in a special text
message from the network operator or service provider
that offers the IM service. See "Data and settings‚" p. 58.
You can also enter the settings manually. See "Chat server
settings‚" p. 84.
Connect to an IM server
To log in automatically when you start IM, select
Options > Settings > Server settings > IM login type >
On app. start-up.
1Open IM to have your device connect to the IM server
in use. To change the IM server in use and save new IM
servers, see "Chat server settings‚" p. 84.
2Enter your user ID and password, and press to log
in. You obtain the user ID and password for the IM
server from your service provider.
You can select Cancel to stay offline; to log in to the
IM server later, select Options > Login. You cannot
send or receive messages while you are offline.
3To log out, select Options > Logout.
Modify your IM settings
Select Options > Settings > IM settings and from the
following:
Use screen name (shown only if IM groups are supported
by the server)—To enter a nickname, select Yes.
IM presence—To allow others to see if you are online,
select Active for all.
My own
82
Allow messages from—To allow messages from all, select
All.
Allow invitations from—To allow invitations only from
your IM contacts, select IM contacts only. IM invitations
are sent by IM contacts who want you to join their groups.
Msg. scrolling speed—To select the speed at which new
messages are displayed.
Sort IM contacts—To sort your IM contacts
Alphabetically or By online status.
Availability reloading—To choose how to update
information about whether your IM contacts are online or
offline, select Automatic or Manual.
Search for IM groups and users
To search for groups, in the IM groups view, select
Options > Search. You can search by Group name, Topic,
and Members (user ID).
To search for users, in the IM contacts view, select
Options > New IM contact > Search from server. You
can search by User's name, User ID, Phone number, and
E-mail address.
Join and leave an IM group
To join an IM group that you have saved, scroll to the
group, and press .
To join an IM group not on the list, but for which you know
the group ID, select Options > Join new group. Enter the
group ID, and press .
To leave the IM group, select Options > Leave IM group.
Chat
After you join an IM group, you can view the messages that
are exchanged there, and send your own messages.
To send a message, write the message in the message
editor field, and press .
To send a private message to a participant, select
Options > Send private msg., select the recipient, write
the message, and press .
To reply to a private message sent to you, select the
message and Options > Reply.
To invite IM contacts who are online to join the IM group,
select Options > Send invitation, select the contacts you
want to invite, write the invitation message, and press .
To prevent receiving messages from certain participants,
select Options > Blocking options and the desired option.
Record chats
To record to a file the messages that are exchanged during
a conversation or while you are joined in a IM group, select
Options > Record chat, enter a name for the conversation
My own
83
file, and press . To stop recording, select Options >
Stop recording.
The recorded conversation files are automatically saved in
Recorded chats.
To view the recorded chats, in the main view, select
Recorded chats, select the conversation, and press .
View and start conversations
Go to the Conversations view to see a list of the individual
conversation participants that you have an ongoing
conversation with.
To view a conversation, scroll to a participant, and press
.
To continue the conversation, write your message, and
press .
To return to the conversations list without closing the
conversation, select Back.
To close the conversation, select Options > End
conversation. Ongoing conversations are automatically
closed when you exit IM.
To start a new conversation, select Options > New
conversation and from the following:
Select recipient—To see a list of your chat contacts that
are currently online. Scroll to the contact that you want to
start a conversation with, and press .
Enter user ID—Enter the user ID of the user you want to
start a conversation with, and press .
The user ID is provided by the service provider to those
who register to this service.
To save a conversation participant to your IM contacts,
scroll to the participant, and select Options > Add to IM
contacts.
To send automatic replies to incoming messages, select
Options > Set auto reply on. Enter the text, and select
Done. You can still receive messages.
IM contacts
Go to the IM contacts to retrieve chat contact lists from
the server, or to add a new chat contact to a contact list.
When you log in to the server, the previously used chat
contact list is retrieved from the server automatically.
Manage IM groups
Go to the IM groups view to see a list of the IM groups
that you have either saved or are currently joined to.
My own
84
Chat server settings
Select Options > Settings > Server settings. You may
receive the settings in a special text message from the
network operator or service provider that offers the chat
service. You obtain the user ID and password from your
service provider when you register to the service. If you do
not know your user ID or password, contact your service
provider.
To change the IM server to which you want to connect,
select Default server.
To add a new server to your list of IM servers, select
Servers > Options > New server. Enter the following
settings:
Server name—Enter the name for the chat server.
Access point in use—Select the access point you want to
use for the server.
Web address—Enter the URL address of the IM server.
User ID—Enter your user ID.
Password—Enter your login password.
Connectivity
85
Connectivity
Bluetooth connection
You can connect wirelessly to other compatible devices
with Bluetooth wireless technology. Compatible devices
may include mobile phones, computers, and enhancements
such as headsets and car kits. You can use Bluetooth
technology to send images, video clips, music and sound
clips, and notes; to connect wirelessly to your compatible
PC (for example, to transfer files); or to connect to a
compatible printer to print images with Image print. See
"Image print‚" p. 47.
Since devices with Bluetooth technology communicate
using radio waves, your device and the other device do not
need to be in direct line-of-sight. The two devices only
need to be within 10 meters (33 feet) of each other,
although the connection may be subject to interference
from obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification 1.2
supporting the following profiles: Basic Printing Profile,
Generic Access Profile, Serial Port Profile, Dial-up
Networking Profile, Headset Profile, Handsfree Profile,
Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, and Basic Imaging Profile. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
A profile corresponds to a service or a function, and
defines how different devices connect. For example, the
Handsfree Profile is used between the handsfree device
and the phone. For devices to be compatible, they must
support the same profiles.
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use the Bluetooth
connection. See "Security‚" p. 101 for more information on
locking the device.
Connectivity
86
Bluetooth connection settings
Press , and select Connect. > Bluetooth.
Select from the following:
Bluetooth—Select On or Off. To connect wirelessly to
another compatible device, first set Bluetooth On, and
then establish a connection.
My phone's visibility—To allow your device to be found
by other devices with Bluetooth technology, select Shown
to all. To hide it from other devices, select Hidden.
My phone's name—Define a name for your device. After
you set a Bluetooth connection and change My phone's
visibility to Shown to all, your device and this name can
be seen by other users with devices using Bluetooth
technology.
Security tips
When you are not using Bluetooth, set Bluetooth Off, or
select My phone's visibility > Hidden.
Do not pair with an unknown device.
Send data using Bluetooth wireless
technology
There can be several active Bluetooth connections at a
time. For example, if you are connected to a headset, you
can also transfer files to another compatible device at the
same time.
Bluetooth connection indicators
• When is shown in the standby mode, a Bluetooth
connection is active.
• When is blinking, your device is trying to connect
to the other device.
• When is shown continuously, the Bluetooth
connection is active.
To send text using a Bluetooth connection (instead of text
messages), open Notes, write the text, and select
Options > Send > Via Bluetooth.
1Open an application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2Select the item (for example, an image), and Options >
Send > Via Bluetooth. Devices with Bluetooth
technology that are within range start to appear on the
display one by one. You can see a device icon, the name
of the device, the device type, or a short name.
If you have searched for devices earlier, a list of the
devices that were found previously is shown first. To
start a new search, select More devices. If you switch
off the device, the list is cleared.
Device icons:
—Computer; —Phone; —Audio or video; —
Headset; —Other.
Connectivity
87
To interrupt the search, select Stop. The device list
freezes.
3Select the device with which you want to connect.
4If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See "Pair devices‚" p. 87.
5When the connection has been established, Sending
data is shown.
The Sent folder in Messaging does not store messages sent
using a Bluetooth connection.
When searching for devices, some devices may show only
the unique addresses (device addresses). To find the unique
address of your device, enter the code *#2820# in the
standby mode.
Pair devices
Pairing means authentication. The users of the two devices
with Bluetooth technology should agree on a common
passcode, and use the same passcode for both devices in
order to pair them. Devices that do not have a user
interface have a factory-set passcode.
In the Bluetooth main view, press to open the paired
devices view ( ).
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. The passcode is used only once.
To pair with a device, select Options > New paired
device. Devices with Bluetooth technology that are within
range start to appear on the display one by one. Select the
device, and enter the passcode. The same passcode must
be entered on the other device as well. After pairing, the
device is saved to the paired devices view.
Paired devices are indicated by in the device search.
To define a short name (nickname or alias) for a paired
device, scroll to the device, and select Options > Assign
short name in the paired devices view. This name helps
you to recognize a certain device during device search or
when a device requests a connection.
To set a device to be authorized or unauthorized, scroll to
a device, select Options and from the following options:
Set as authorized—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust. indicates authorized devices in the paired
devices view.
Set as unauthorized—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Connectivity
88
If you are currently connected to a device and delete the
pairing with that device, pairing is removed immediately,
and the connection is switched off.
Receive data using a Bluetooth
connection
When you receive data using a Bluetooth connection, a
tone sounds, and you are asked if you want to accept the
message. If you accept, is shown, and the item is
placed in the Inbox folder in Messaging. Messages
received using a Bluetooth connection are indicated by
. See "Inbox—receive messages‚" p. 57.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select Bluetooth >
Off.
PC connections
You can use your device with a variety of PC connectivity
and data communications applications. With Nokia PC
Suite you can synchronize contacts, calendar, and To-do
notes; and transfer images between your device and a
compatible PC.
Always create the connection from the PC to synchronize
with your device.
For further information on how to install Nokia PC Suite
(compatible with Windows 2000 and Windows XP), see the
User Guide for Nokia PC Suite and the Nokia PC Suite help
in the “Install” section. See the CD-ROM, if supplied in the
sales package.
CD-ROM
The CD-ROM should launch after you insert it into the
CD-ROM drive of a compatible PC. If not, proceed as
follows: Open Windows Explorer, right-click the CD-ROM
drive where you inserted the CD-ROM, and select
Autoplay.
Your device as a modem
You can use your device as a modem to send and receive
e-mail, or to connect to the Internet with a compatible PC
by using a Bluetooth connection or USB cable. Detailed
installation instructions can be found in the User Guide for
Nokia PC Suite in Modem options. See the CD-ROM, if
supplied in the sales package.
When using Nokia PC Suite for the first time, to connect
your device to a compatible PC and to use Nokia PC Suite,
use the Get Connected wizard available in Nokia PC Suite.
See the CD-ROM, if supplied in the sales package.
Connectivity
89
Connection manager
You may have multiple data connections active at the
same time when you are using your device in GSM
networks. Press , and select Connect. > Conn. mgr. to
view the status of multiple data connections, view details
on the amount of data sent and received, and end
connections. When you open Conn. mgr., you can see the
following:
• Open data connections: data calls ( ) and packet
data connections ( ) or ( )
• The status of each connection
• The amount of data uploaded and downloaded for each
connection (shown for packet data connections only)
• The duration of each connection (shown for data calls
only)
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, taxes, and so
forth.
To end a connection, scroll to a connection, and select
Options > Disconnect.
To close all open connections, select Options >
Disconnect all.
View data connection details
To view the details of a connection, scroll to a connection,
and select Options > Details.
Name—The name of the Internet access point (IAP) in use,
or the modem connection name if the connection is a
dial-up connection.
Bearer—The type of data connection: Data call or Packet
data.
Status—The current status of the connection:
Connecting, Conn.(inact.), Conn.(active), On hold,
Disconnctng., or Disconnected.
Received—The amount of data, in bytes, received to your
device.
Sent—The amount of data, in bytes, sent from your device.
Duration—The length of time that the connection has
been open.
Speed—The current speed of both sending and receiving
data in kilobytes per second.
Dial-up—The dial-up number used.
Name—Access point name used.
Shared (not shown if the connection is not shared)—The
number of applications using the same connection.
Connectivity
90
Remote synchronization
Press , and select Connect. > Sync. Sync enables you
to synchronize your notes, calendar, and contacts with
various calendar and address book applications on a
compatible computer or on the Internet.
The synchronization application uses SyncML technology
for synchronization. For information on SyncML
compatibility, contact the supplier of the calendar or
address book application you want to synchronize your
data with.
You may receive synchronization settings in a special text
message. See "Data and settings‚" p. 58.
Create a new synchronization profile
1If no profiles have been defined, your device asks if you
want to create a new profile. Select Yes.
To create a new profile in addition to existing ones,
select Options > New sync profile. Choose whether
you want to use the default setting values or copy the
values from an existing profile to be used as the basis
for the new profile.
2Define the following:
Sync profile name—Write a descriptive name for the
profile.
Data bearer—Select the connection type: Web or
Bluetooth.
Access point (shown only if Data bearer is set to
Web)—Select an access point to use for the data
connection. See "Data connections and access points‚"
p. 98 for more information.
Host address—The IP address of the host server.
Contact your service provider or system administrator
for the correct values.
Port (shown only if Data bearer is set to Web)—
Contact your service provider or system administrator
for the correct values.
User name—Your user ID for the synchronization
server. Contact your service provider or system
administrator for your correct ID.
Password—Write your password. Contact your service
provider or system administrator for the correct value.
Allow sync requests—Select Yes if you want to allow
the server to start a synchronization.
Accept all sync reqs.—Select No if you want your
device to ask you before a synchronization initialized
by the server is started.
Network authentic. (shown only if Data bearer is set
to Web)—Select Yes to enter a network user name and
password. Press to view the user name and
password fields.
Press to select Contacts, Calendar, or Notes.
Connectivity
91
•Select Yes if you want to synchronize the selected
database.
•In Remote database, enter a correct path to the
remote calendar, address book, or notes database on
the server.
•Select Synchronization type: Normal (two-way
synchronization), To server only, or To phone only.
3Select Back to save the settings and return to the main
view.
Synchronize data
In the Sync main view, you can see the different
synchronization profiles and the kind of data to be
synchronized.
1Select a synchronization profile and Options >
Synchronize. The status of the synchronization is
shown at the bottom of the screen.
To cancel synchronization before it finishes, select
Cancel.
2You are notified when the synchronization is complete.
After synchronization is complete, select Options >
View log to open a log file showing the
synchronization status (Complete or Incomplete) and
how many calendar or contact entries, or notes have
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
Device manager
Press , and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, select Start configuration.
To allow or deny receiving of configuration settings from
a service provider, select Enable config. or Disable
config..
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your
device to the server.
Session mode— Select Bluetooth or Web.
Connectivity
92
Access point—Select an access point to be used when
connecting to the server. See "Data connections and
access points‚" p. 98 for more information.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want your device to ask for
confirmation before accepting a configuration from the
server, select No.
Office
93
Office
Calculator
To add, substract, multiply, divide, calculate square roots
and percentages, press , and select Office >
Calculator.
Note: This calculator has limited accuracy and is
designed for simple calculations.
To save a number in the memory (indicated by M), select
Options > Memory > Save. To retrieve a number in
memory, select Options > Memory > Recall. To clear a
number in memory, select Options > Memory > Clear.
Calculate percentages
1Enter a number for which you want to calculate a
percentage.
2Select , , , or .
3Enter the percentage.
4Select .
Converter
To convert measures such as Length from one unit (Yards)
to another (Meters), press , and select Office >
Converter.
Note: The Converter has limited accuracy, and
rounding errors may occur.
1Scroll to the Type field, and press to open a list of
measures. Scroll to the measure you want to use, and
select OK.
2Scroll to the first Unit field, and press . Select the
unit from which you want to convert and OK. Scroll to
the next Unit field, and select the unit to which you
want to convert.
3Scroll to the first Amount field, and enter the value
you want to convert. The other Amount field changes
automatically to show the converted value.
Press to add a decimal and for the +, - (for
temperature), and E (exponent) symbols.
To change the conversion order, enter the value in the
second Amount field. The result is shown in the first
Amount field.
Office
94
Set base currency and exchange rates
Before you can make currency conversions, you need to
choose a base currency and add exchange rates. The rate
of the base currency is always 1. The base currency
determines the conversion rates of the other currencies.
1Select Converter > Options > Currency rates. A list of
currencies opens, and you can see the current base
currency at the top.
To rename a currency, go to the currency rates view,
scroll to the currency, and select Options > Rename
currency.
2To change the base currency, scroll to the currency,
and select Options > Set as base curr..
3Add exchange rates. Scroll to the currency, and enter
a new rate, that is, how many units of the currency
equal one unit of the base currency you have selected.
After you have inserted all the necessary exchange rates,
you can make currency conversions.
Note: When you change base currency, you must
enter the new rates because all previously set
exchange rates are set to zero.
To-do
Press , and select Office > To-do to write notes and
maintain a task list.
To add a note, press any key to start to write the task in the
Subject field.
To set the due date for the task, scroll to the Due date field,
and enter a date.
To set the priority for the To-do note, scroll to the Priority
field, and press to select the priority. The priority icons
are (High) and (Low). There is no icon for Normal.
To mark a task as completed, scroll to it in the To-do list,
and select Options > Mark as done.
To restore a task, scroll to it in the To-do list, and select
Options > Mark as not done.
Notes
Press , and select Office > Notes to write notes. You
can send notes to other compatible devices and save plain
text files (.txt format) that you receive to Notes.
Office
95
Recorder
Press , and select Office > Recorder to record
telephone conversations and voice memos. If you are
recording a telephone conversation, both parties hear a
tone every 5 seconds during recording.
Tools
96
Tools
Settings
To change settings, press , and select Tools > Settings.
Scroll to a setting group, and press to open it. Scroll
to a setting you want to change, and press .
Phone settings
General
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according
to the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text—You can set the predictive text input On
or Off for all editors in the device. The predictive text
dictionary is not available for all languages.
Welcome note or logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note (up to 50 letters), or Image to select a photo
or picture from Gallery.
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See "Phone and SIM‚" p. 101. After resetting, the device
may take a longer time to power on. Documents and files
are unaffected.
Media key
Press to open the shortcut assigned to the multimedia
key. Press again to return to the previous view. To
assign a new shortcut, press , and select Multimedia
key > Options > Change. Select an application from the
list, and select OK.
Tools
97
The shortcut is available whenever you press .
Standby mode
Active standby—Use shortcuts to applications in the
standby mode on the main display. See "Active standby
mode‚" p. 26.
Left selection key—To assign a shortcut to the left
selection key ( ) in the standby mode, select an
application from the list.
Right selection key—To assign a shortcut to the right
selection key ( ) in the standby mode, select an
application from the list.
Active standby apps.—To select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key, by selecting an application from
the list. These scroll key shortcuts are not available if the
active standby is on.
Operator logo—This setting is visible only if you have
received and saved an operator logo. You can choose if you
want the operator logo to show or not.
Display
Brightness—You can change the brightness of the display
to lighter or darker. The brightness of the display is
automatically adjusted according to the environment.
Power saver time-out—The power saver on the display is
activated when the time-out period is over.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
Call settings
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(Set by network) (network service).
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Select Activate to
request the network to activate call waiting, Cancel to
request the network to deactivate call waiting, or Check
status to check if the function is active or not.
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See "Answer or decline a call‚" p. 29.
Tools
98
Message text—Write a text to be sent in a text message
when you reject a call.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
1-touch dialing—Select On, and the numbers assigned to
the 1-touch dialing keys ( - ) can be dialed by
pressing and holding the key. See also "1-touch dial a
phone number‚" p. 28.
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, , , and .
Line in use—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, is shown in the standby mode.
To switch between the phone lines, press and hold in
the standby mode.
Line change—To prevent line selection (network service),
select Line change > Disable if supported by your SIM
card. To change this setting, you need the PIN2 code.
Connection settings
Data connections and access points
Your device supports packet data connections ( ), such as
GPRS in the GSM network.
General packet radio service (GPRS) uses packet data
technology where information is sent in short packets of
data over the mobile network.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Tools
99
Packet data connections in GSM networks
When you use your device in GSM networks, multiple data
connections can be active at the same time and access
points can share a data connection. To check the active
data connections, see "Connection manager‚" p. 89.
The following indicators may be displayed below the signal
indicator, depending on which network you use:
GSM network, GPRS or EDGE packet data connection is
available.
GSM network, GPRS or EDGE packet data connection is
active.
GSM network, GPRS or EDGE multiple packet data
connections are active.
Receive access point settings
You may receive access point settings in a text message
from a service provider, or you may have preset access
point settings in your device. See "Data and settings‚"
p. 58.
To create a new access point, press , and select Tools >
Settings > Connection > Access points.
An access point may be protected ( ) by your network
operator or service provider. Protected access points
cannot be edited or deleted.
Access points
See "Receive MMS and e-mail settings‚" p. 57, "E-mail‚"
p. 64, and "Access the Web‚" p. 73.
Follow the instructions given to you by your service
provider.
Connection name—Give a descriptive name for the
connection.
Data bearer—Depending on the data connection you
select, only certain setting fields are available. Fill in all
fields marked with Must be defined or with a red asterisk.
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Access point name (for packet data only)—The access
point name is needed to establish a connection to the
packet data networks. You obtain the access point name
from your network operator or service provider.
User name—The user name may be needed to make a data
connection, and is usually provided by the service
provider. The user name is often case-sensitive.
Prompt password—If you must enter a new password
every time you log in to a server, or if you do not want to
save your password in the device, select Yes.
Tools
100
Password—A password may be needed to make a data
connection, and is usually provided by the service
provider. The password is often case-sensitive.
Authentication—Select Normal or Secure.
Homepage—Depending on what you are setting up, write
the Web address or the address of the multimedia
messaging center.
Select Options > Advanced settings to change the
following settings:
Network type—Select the Internet protocol type to use:
IPv4 settings or IPv6 settings. The other settings depend
on the selected network type.
Phone IP address (for IPv4)—Enter the IP address of your
device.
Name servers—In Primary name server:, enter the IP
address of the primary DNS server. In Second. name
server:, enter the IP address of the secondary DNS server.
Contact your Internet service provider to obtain these
addresses.
The domain name service (DNS) is an Internet service that
translates domain names such as www.nokia.com into IP
addresses like 192.100.124.195.
Proxy serv. address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Also, starting an
active packet data connection is quicker (for example, to
send and receive e-mail). If you select When needed, the
device uses a packet data connection only if you start an
application or action that needs it. If there is no packet
data coverage and you select When available, the device
periodically tries to establish a packet data connection.
Access point—The access point name is needed to use your
device as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your device, view or delete them
in Configurations.
Date and time
Tools
101
See "Clock settings‚" p. 19.
See also the language settings in "General‚" p. 96.
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See "Glossary of PIN and
lock codes‚" p. 101.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. See "Glossary of PIN and
lock codes‚" p. 101.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
If you forget any of these codes, contact your service
provider.
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks and
can be used only if the correct lock code is entered. Enter
a number for the time-out in minutes, or select None to
turn off the autolock period.
To unlock the device, enter the lock code.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
To lock the device manually, press . A list of commands
opens. Select Lock phone.
Lock if SIM changed—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
Tools
102
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the PIN
code is blocked, and you need to unblock it before you can
use the SIM card again. See the information about the
PUK code in this section.
UPIN code—This code may be supplied with the USIM
card. The USIM card is an enhanced version of the SIM
card and is supported by UMTS mobile phones. The UPIN
code protects the USIM card against unauthorized use.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in
your device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid
unauthorized use. The factory setting for the lock code is
12345. To avoid unauthorized use of your device, change
the lock code. Keep the new code secret and in a safe
place separate from your device.
Personal unblocking key (PUK) code and PUK2 code—
These codes (8 digits) are required to change a blocked
PIN code or PIN2 code, respectively. If the codes are not
supplied with the SIM card, contact the operator whose
SIM card is in your device.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your device.
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
Digital certificates are used to verify the origin of the
XHTML or WML pages and installed software. However,
they can only be trusted if the origin of the certificate is
known to be authentic.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
Tools
103
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
View certificate details—check authenticity
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified on the device display if the identity of the
server is not authentic or if you do not have the correct
security certificate in your device.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
•Certificate not trusted—You have not set any
application to use the certificate. See "Change the trust
settings‚" p. 103.
•Expired certificate—The period of validity has ended
for the selected certificate.
•Certificate not valid yet—The period of validity has
not yet begun for the selected certificate.
•Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
•Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
•Internet: Yes—The certificate is able to certify servers.
•App. installation: Yes—The certificate is able to certify
the origin of a new Java application.
•Online certif. check—Select to check the online
certificates before installing an application.
Select Options > Edit trust setting to change the value.
Call forwarding
Call forwarding allows you to forward your incoming
calls to your voice mailbox or another phone number. For
details, contact your service provider.
1Press , and select Tools > Settings > Call
forwarding.
2Select which calls you want to forward: Voice calls or
Fax calls.
Tools
104
3Select the desired forward option. To forward voice
calls when your number is busy or when you reject
incoming calls, select If busy.
4Set the forward option on (Activate) or off (Cancel),
or check whether the option is activated (Check
status). Several forward options can be active at the
same time.
When all calls are forwarded, is shown in the
standby mode.
Call restriction and call forwarding cannot be active at the
same time.
Call restriction
Call restriction (network service) allows you to restrict
the calls that you make or receive with the device. To
change the settings, you need the restriction password
from your service provider. Select the desired restriction
option, and set it on (Activate) or off (Cancel), or check
whether the option is active (Check status). Call
restriction affects all calls, including data calls.
Call restriction and call forwarding cannot be active at the
same time.
When calls are restricted, calls may be possible to certain
official emergency numbers.
Network
Operator selection—Select Automatic to set the device to
search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhancement settings
Indicators shown in the standby mode:
A headset is connected.
A loopset is connected.
Tools
105
The headset is unavailable, or a Bluetooth connection
to a headset is lost.
Select Headset, Loopset, or Bluetooth handsfree, and the
following options are available:
Default profile—To set the profile that you want activated
each time you connect a certain enhancement to your
device. See "Profiles—set tones‚" p. 24.
Automatic answer—To set the device to answer an
incoming call automatically after 5 seconds. If the ringing
type is set to Beep once or Silent, automatic answer is
disabled.
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see "Voice dialing‚" p. 28.
To activate enhanced voice commands for starting
applications or profiles, you must open the Voice com.
application and its Profiles folder. Press , and select
Tools > Voice com. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold the capture key, and say
a voice command. The voice command is the name of the
application or profile displayed in the list.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, scroll to it, select Options >
Change command, and enter the new voice command as
text. Avoid very short names, abbreviations, and acronyms.
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select Synthesizer > Off. To reset voice
recognition learning, for example, when the main user of
the device has changed, select Remove my adapts.
Application manager
Press , and select Tools > Manager. You can install two
types of applications and software to your device:
• J2ME™ applications based on Java™ technology with
the extension .jad or .jar ( ).
• Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis extension. Only install software
specifically designed for your Nokia N70. Software
providers will often refer to the official model number
of this product: the Nokia N70-5.
Tools
106
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using a Bluetooth connection. You can use
Nokia Application Installer in Nokia PC Suite to install an
application to your device or a memory card. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a memory card (local disk).
If you have received the installation file as an e-mail
attachment, go to your mailbox, open the e-mail, open
the attachments view, scroll to the installation file, and
press to start installation.
Install applications and software
You can also use Nokia Application Installer available in
Nokia PC Suite to install applications. See the CD-ROM, if
supplied with the device.
Application icons are as follows: .sis application;
Java application; application is not fully installed;
application is installed on the memory card.
Important: Only install and use applications and
other software from sources that offer adequate
security and protection against harmful software.
Before installation, note the following:
• To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
• To display the security certificate details of the
application, select Options > View certificate. See
"Certificate management‚" p. 102.
• If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full back-up copy of the removed software
package. To restore the original application, remove the
application, and install the application again from the
original installation file or the back-up copy.
• The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are downloading
the .jar file, you may need to enter a user name and
password to access the server. You obtain these from
the supplier or manufacturer of the application.
1Open Manager, and scroll to an installation file.
Alternatively, search the device memory or the memory
card in File mgr., or open a message in Messaging >
Inbox that contains an installation file.
Select the application, and press to start the
installation.
While browsing, you can download an installation file
and install it without closing the connection.
Tools
107
2Select Options > Install.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
To start an installed application, locate it in the menu, and
press .
To start a network connection and to view extra
information about the application, scroll to it, and select
Options > Go to web address, if available.
To see what software packages have been installed or
removed and when, select Options > View log.
To send your installation log to a help desk so that they can
see what has been installed or removed, select Options >
Send log > Via text message or Via e-mail (available only
if the correct e-mail settings are in place).
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
If you remove software, you can only reinstall it if you have
the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
If another software package depends on the software
package that you removed, the other software package
may stop working. Refer to the documentation of the
installed software package for details.
Application settings
Select Options > Settings and from the following:
Software installation—Select if Symbian software can be
installed: On, Signed only, or Off.
Online certif. check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components.
In the Manager main view, scroll to an application, and
select Options > Suite settings to change settings related
to that specific application.
Tools
108
Activation keys—handle
copyright-protected files
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Press , and select Tools > Activation keys to view the
digital rights activation keys stored in your device:
• Valid keys ( ) are connected to one or more media
files.
• With expired keys ( ), you have no time to use the
media file, or the time period for using the file is
exceeded. To view the Expired activation keys, press
.
To buy more usage time or extend the usage period for a
media file, select an activation key and Options >
Activate content. Activation keys cannot be updated if
Web service message reception is disabled. See "Web
service messages‚" p. 66.
To view which keys are not in use at the moment (Not
used), press twice. Unused activation keys have no
media files connected to them saved in the device.
To view detailed information such as the validity status
and ability to send the file, select an activation key, and
press .
Troubleshooting
109
Troubleshooting
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Verify that both devices have activated Bluetooth
connectivity.
Verify that the distance between the two devices is not
over 10 meters (33 feet) and that there are no walls or
other obstructions between the devices.
Verify that the other device is not in hidden mode.
Verify that both devices are compatible.
Q: How can I end a Bluetooth connection?
A: If another device is connected to your device, you can either
end the connection using the other device or by
deactivating Bluetooth connectivity. Select Connect. >
Bluetooth > Off.
Multimedia messaging
Q: What should I do when the device cannot receive a
multimedia message because memory is full?
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message.
Delete some data first. To view what kind of data you
have and how much memory the different data groups
consume, select File manager > Options > Memory
details.
Q: The note Retrieving message is shown briefly. What is
happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center.
Verify that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Select Messaging > Options >
Settings > Multimedia message.
Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection, select
Messaging and one of the following:
On receiving msg. > Defer retrieval—To have the
multimedia messaging center save the message to be
retrieved later, for example, after you have checked the
settings. After this change, the device still needs to send
information notes to the network. To retrieve the message
now, select Retr. immediately.
On receiving msg. > Reject message—To reject all
incoming multimedia messages. After this change, the
device needs to send information notes to the network,
and the multimedia messaging center deletes multimedia
messages that are waiting to be sent to you.
Multimedia reception > Off—To ignore all incoming
multimedia messages. After this change, the device does
Troubleshooting
110
not make any network connections related to multimedia
messaging.
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the
contact card in Contacts.
Camera
Q: Why do images look smudgy?
A: Ensure that the camera lens protection window is clean.
Calendar
Q: Why are the week numbers missing?
A: If you have changed the calendar settings so that the week
starts on a day other than Monday, the week numbers are
not shown.
Browser services
Q: What do I do if the following message is displayed: No
valid access point defined. Define one in Web settings.?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Log
Q: Why does the log appear empty?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all
events, select Connect. > Log > Options > Filter > All
communication.
Q: How do I delete my log information?
A: Select Connect. > Log > Options > Clear log or go to
Settings > Log duration > No log. These will erase the log
contents, recent calls register, and message delivery
reports permanently.
PC connectivity
Q: Why do I have problems connecting the device to my PC?
A: Verify that Nokia PC Suite is installed and running on your
PC. See the User Guide for Nokia PC Suite on the CD-ROM,
if supplied in the sales package. If Nokia PC Suite is
installed and running, you can use Nokia Get connected
wizard available in Nokia PC Suite to connect to your PC.
For further information on how to use Nokia PC Suite, see
the help function on Nokia PC Suite or visit the support
pages at www.nokiausa.com.
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the lock
code, contact your dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider.
For information about passwords, contact your access
point provider, for example, a commercial Internet service
provider (ISP), service provider, or network operator.
Troubleshooting
111
Application not responding
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
. Then scroll to the application, and press to close the
application.
Device display
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in
Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call
cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are deleting
multiple items and one of the following notes are shown: Not
enough memory to perform operation. Delete some data
first. or Memory low. Delete some data., try deleting items
one by one (starting from the smallest item).
Q: How can I save my data before deleting it?
A: Save your data using one of the following methods:
• Use Nokia PC Suite to make a back-up copy of all data to
a compatible computer.
• Send images to your e-mail address, and then save the
images to your computer.
• Send data using a Bluetooth connection to a compatible
device.
• Store data on a compatible memory card.
Enhancements
112
Enhancements
If you want to enhance device
functionality, a range of
enhancements is available for
you. You can select any of
these items to help
accommodate your specific
communication needs. For
availability of these and other
enhancements, contact your dealer. Protective carrying
cases and straps for your Nokia N70 are available for
purchase and can be located at www.nokiausa.com.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-3, or AC-4 charger, and from
an ACP-8, ACP-9, or ACP-12U charger when used with the
CA-44 charger adapter.
Warning: Use only batteries, chargers and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous. For availability of approved
enhancements, please check with your dealer.
A few practical rules about accessories and
enhancements:
•Keep all accessories and enhancements out of the
reach of small children.
• When you disconnect the power cord of any accessory
or enhancement, grasp and pull the plug, not the cord.
• Check regularly that enhancements installed in a
vehicle are mounted and are operating properly.
•Installation of any complex car enhancements must be
made by qualified personnel only.
Power
•Battery, 900 mAh, Li-ion (BL-5C)
• Travel chargers (ACP-12U, ACP-9, ACP-8, and ACP-7)
•Mobile charger (LCH-12)
Data
•Connectivity Cable (DKU-2)
• Wireless Keyboard (SU-8W)
• Digital Pen (SU-1B)
• MultiMediaCard (MU-1)
• Reduced Size MultiMediaCard (MU-2)
• Wireless GPS Module (LD-1W)
•Connectivity Cable (CA-53)
Enhancements
113
Audio
•Wireless Boom Headset (HS-4W)
• Wireless Headset (HDW-3)
• Wireless Headset (HS-11W)
• Wireless Clip-on Headset (HS-21W)
• Wireless Image Headset (HS-13W)
• Headset (HS-5)
• Boom Headset (HDB-4)
• Fashion Stereo Headset (HS-3)
• Stereo Headset (HDS-3)
•Music Stand (MD-1)
Accessibility
•Loopset (LPS-4)
•TTY adapter (HDA-10)
Car
•Wireless Plug-in Car Handsfree (HF-6W))
• Mobile Holder (CR-27)
• Wireless Car Kit (CK-1W, CK-7W)
• Headrest Handsfree (BHF-3)
• Plug-in Car Handsfree (HF-3)
•Car Kit (CK-10)
Imaging and lifestyle
•Nokia Remote Camera (PT-6)
Battery information
114
Battery information
Charging and discharging
Your device is powered by a rechargeable battery. The full
performance of a new battery is achieved only after two or
three complete charge and discharge cycles. The battery can
be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if
the battery has not been used for a prolonged period, it may
be necessary to connect the charger then disconnect and
reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its
charge over time.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the display
or before any calls can be made.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it from
an authorized Nokia dealer, look for the Nokia Original
Battery information
115
Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic original
Nokia battery, you should refrain from using it, and take it to
the nearest authorized Nokia service point or dealer for
assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
1When looking at the hologram on
the label, you should see the Nokia
connecting hands symbol from
one angle and the Nokia Original
Enhancements logo when looking
from another angle.
2When you angle the hologram left,
right, down, and up, you should
see 1, 2, 3, and 4 dots on each side
respectively.
3Scratch the side of the label to
reveal a 20-digit code, for
example,
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed
by the bottom row.
4Confirm that the 20-digit code is valid by following the
instructions at www.nokia.com/batterycheck.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
Care and maintenance
116
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery, and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as
instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as
contacts and calendar notes, before sending your device to
a service facility.
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
Additional safety information
117
Additional safety information
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Operating environment
This device meets RF exposure guidelines when used either in
the normal use position against the ear or when positioned at
least 1.5 centimeters (5/8 inches) from the body. When a carry
case, belt clip, or holder is used for body-worn operation, it
should not contain metal and should position the device the
above-stated distance from your body.
To transmit data files or messages, this device requires a
quality connection to the network. In some cases, transmission
of data files or messages may be delayed until such a
connection is available. Ensure that the above separation
distance instructions are followed until the transmission is
completed..
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum
separation of 15.3 centimeters (6 inches) be maintained
between a wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research. Persons
with pacemakers should do the following:
• Always keep the device more than 15.3 centimeters
(6 inches) from the pacemaker
• Not carry the device in a breast pocket
• Hold the device to the ear opposite the pacemaker to
minimize the potential for interference.
If you suspect interference, switch off your device, and move
the device away.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
Additional safety information
118
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer,
or its representative, of your vehicle or any equipment that
has been added.
Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not
store or carry flammable liquids, gases, or explosive materials
in the same compartment as the device, its parts, or
enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place
objects, including installed or portable wireless equipment in
the area over the air bag or in the air bag deployment area. If
in-vehicle wireless equipment is improperly installed, and the
air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refueling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always,
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust, or
metal powders.
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of this,
connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for essential
communications like medical emergencies.
Additional safety information
119
To make an emergency call:
1If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2Press the end key as many times as needed to clear the
display and ready the device for calls.
3Enter the official emergency number for your present
location. Emergency numbers vary by location.
4Press the call key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult
this guide or your service provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio
waves.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organization
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
the device is designed to use only the power required to reach
the network. That amount changes depending on a number of
factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is 0.93 W/kg.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on
national reporting and testing requirements and the network
band. Additional SAR information may be provided under
product information at www.nokia.com.
Your mobile device is also designed to meet the requirements
for exposure to radio waves established by the Federal
Communications Commission (USA) and Industry Canada.
These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this
standard during product certification for use at the ear is 0.51
W/kg and when properly worn on the body is 0.65 W/kg.
Information about this device can be found on the FCC's
website at http://www.fcc.gov/oet/fccid by searching the
equipment authorization system using FCC ID: QFXRM-99.
Additional safety information
120
Technical Information
Feature Specification
Weight 129 grams (4.6 oz) with BL-5C Li-Ion
Battery
Size Volume: 5.80 in3 (95 cm3)
Length: 4.28 in (108.6 mm)
Width: 2.06 in (52.4 mm)
Thickness: 0.84 in (21.3 mm with slide)
Frequency range GSM 900
880–915 MHz (TX)
925–960 MHz (RX)
GSM 1800
1710–1785 MHz (TX)
1805–1880 MHz (RX)
GSM 1900
1850–1910 MHz (TX)
1930–1990 MHz (RX)
Transmitter output
power
Up to 2 W
Battery voltage 3.7 V dc
Operating temperature 14°F to + 131°F
(-10°C to + 55°C)
121
Index
Numerics
1-touch dialing 28
A
access points 98, 99
activation keys 108
adding text 44
alarms
alarm clock 19
calendar 71
applications
installing 106
Java 105
B
backing up 22
Bluetooth 85
connecting two devices, pairing 87
device address 87
headset 104
pairing 87
passcode 87
security 86
switching off 88
bookmarks 74
brightness
display 97
setting in camera 41
C
cache, clearing 77
calendar
alarm 70
creating entries 70
synchronizing PC Suite 71
call register
See log
calls
dialed numbers 30
duration 30
international 27
received 30
settings 97
settings for call forward 103
transferring 29
camera
adjusting brightness 36, 41
adjusting color and lighting 39
adjusting flash settings 36
edit videos 42
flash 38
image setup settings 36, 39
122
saving video clips 41
scenes 39
self-timer 38
sending images 18, 37
sequence mode 37
still image camera settings 38
video recorder settings 42
cameras 36
CD-ROM 88
certificates 102
chat
See instant messaging
clear screen
See standby mode
clearing log information 110
clock 19
alarm 19
settings 19
codes 101
lock code
PIN code 102
PIN2 code 102
security code 102
computer connections 88
conference call 27
connection settings 98
contact cards 33
inserting pictures 33
sending 33
storing touch tones 30
copying
contacts between the SIM card and device memory 34
text 55
copyright protection
See activation keys
cutting text 55
D
data connections
details 89
ending 89
indicators 16
date 19
digital rights management, DRM
See activation keys
DNS, domain name service 100
E
editing videos
adding effects 43
adding sound clips 43
adding transitions 43
custom video clips 42
e-mail 56
automatic retrieving 60
offline 61
opening 60
123
remote mailbox 59
retrieving from mailbox 60
settings 64
viewing attachments 60
enhancements 112
F
file formats
jad 105
jar 105, 106
RealPlayer 48
sis 105
file manager 20
fixed dialing 34
FM radio 67
G
gallery
adding files to album 46
creating new album 46
ordering files in albums 46
viewing images and videos 45
H
handsfree
See loudspeaker
headset settings 104
help application 17
I
indicators 16
instant messaging 81
blocking 82
connecting to a server 81
groups 83
recording messages 82
sending instant messages 82
user ID 83
Internet
See Web
Internet access points (IAP)
See access points
IP address 100
J
Java
See applications, Java
L
lock code 102
log
erasing contents 31
filtering 31
log duration 31
loopset settings 104
loudspeaker 20
M
mailbox 59
automatic retrieving 60
media files
124
fast forward 48
file formats 48
mute sound 48
rewind 48
memory
clearing memory 30
viewing memory consumption 21
memory card 22
memory card adapter 16
menu, rearranging 23
messaging
e-mail 56
multimedia messages 56
text messages 55
movies, muvees
custom muvees 50
quick muvees 50
multimedia messages 56
mute sound 48
P
packet data connections 89
GPRS 98
settings 100
pasting text 55
PC connections
using Bluetooth or USB cable 88
PC Suite
calendar data 71
synchronization 88
transferring images to a PC 45
transferring media files 21
transferring music files to your memory card 48
viewing device memory data 21
personalization 25
phone label 9
PIN code 102
profiles 24
R
radio 67
RealPlayer 48
reminder
See calendar, alarm
remote mailbox 59
resolution, glossary explanation 38
ringing tones
personal ringing tone 35
receiving in a text message 58
RSMMC, reduced-size MMC 16
S
scenes
image scenes 40
video scenes 39
security code
See lock code
sending
125
contact cards, business cards 33
images 18, 37
video clips 44
service commands 52
settings
access codes 101
access points 99
Bluetooth connection 86
calendar 71
call forwarding 103
call restriction 104
certificates 102
data connections 98
date and time 100
display 97
headset 104
IM 81, 84
language 96
lock code 102
loopset 104
original settings 96
personalizing the phone 23
PIN code 102
screen saver 97
UPIN code 102
UPUK code 102
shortcuts 18
SIM card
copying names and numbers to device 34
messages 62
names and numbers 34
sis file 105
SMS center, short message service center 63
snooze 19
software
transferring a file to your device 106
sound clips 45
sounds
muting a ringing tone 29
recording sounds 95
standby mode 23
synchronization 90
T
text message service center
adding new 63
text messages 55
themes 25
time 19
transferring content from another device 25
U
UPIN code 102
UPUK code 102
USB cable 88
user guide updates 10
USIM card 16
126
USSD commands 52
V
video clips 45
video player
See RealPlayer
Visual Radio 68
voice commands 105
voice dialing 28
voice mailbox 27
changing the phone number 27
forwarding calls to voice mailbox 103
voice messages 27
voice tags 105
making calls 28
volume control 20
during a call 27
loudspeaker 20
W
Web
access points, see access points
browser 73