Midland Radio 70112B Multibandwidth portable transceiver User Manual

Midland Radio Corporation Multibandwidth portable transceiver User Instructions

a href="https://usermanual.wiki/Midland-Radio" itemprop="url"> Midland Radio >

User Instructions

0CONTENTSGENERAL FEATURES .................................................1UNPACKING..................................................................2OPTIONAL ACCESSORIES.........................................2GETTING READY..........................................................3DESCRIPTION...............................................................4OPERATION ..................................................................6CHARGER AND BATTERY ..........................................8SPECIFICATIONS .........................................................9General Features1. Ultra compact design & size (102 x 50 x 43.2mm, 335g with high capable battery)2. Heavy durable construction3. 16 channels4. 38 CTCSS/ 83 CDCSS5. PC Programmable, transferable by cloning6. Time-out timer (TOT)7. Busy channel lock-out (BCLO)8. Battery saving mode9. Low battery alert10. DTMF PTT-ID11. Button lockable12. Talking range to 5 miles13. Transmit output power High/Low14. DC7.5V Ni-MH battery1
αUnpackingUnpack and check that all items have been enclosed.Packing contents:radioαantennaβbatterypack (1,350mA)χbelt cilpδhand strapεchargerφuser`s manualOptional Accessories1. External earphone & MIC. (APE–10)2. Additional battery pack (720 mAH, HM–720)Getting Ready1. Installation, Removal Belt ClipInstallation: align the belt clip with theplastic slots of the battery pack. Slidethe belt clip onto the battery pack,pushing firmly until a click heard.Removal: hold up the belt clip releasetab with a fingernail or a coin (or likeinstrument). While holding up therelease tab, slide the belt clip out and away from thebattery pack.2. Installation, Removal Battery PackInstallation: turn off the transceiver. Hold the transceiverwith the back of the unit facing up. Place the batterypack against the back of the transceiver so that the tabson the transceiver engage the four openings in thebattery pack. Slide the battery pack toward the top of thetransceiver until a click heard.Removal: turn off the transceiver. Hold the radio with theback of the unit facing up. With the thumbnail of yourother hand slide the latch lever down. While holding thelatch lever down, slide the battery pack down toward thebottom of the transceiver. Separate the battery packfrom the transceiver.3. Installation AntennaRotate the antenna clockwise until itis seated firmly.*. Before your starting operation, makesure the battery is fully charged.23α βα χδεφ
Description∠ Power on / off and Volume Control SwitchTurn the transceiver on by rotating power on / off andvolume control switch clockwise and control the volume.∇ Channel Select knobRotate the Channel Selector as you desire channelnumber. Speaker . Helical Antenna. Tx / Rx Indicate LED (3 colors)On TransmittingRed Blinking Low batteryOn Receiving, monitoringGreen Blinking Different sub-tone when receivingOrange On Initializing, programming andcloning∏ External Earphone/MIC and Programming Jack Socket√ Hand Strap⋅ Antenna Connector¬ PTT(Push To Talk) ButtonHold down to transmit, release to receive.∧ Function ButtonRefer to “OPERATION” page 7.∨ Monitor ButtonPress to monitor. Holding down over 2 seconds keepsmonitoring function on, and press shortly again or PTTButton to stop.⇔ Belt Clip⇐ Battery Pack4∠∇∏√⋅¬∧∨⇔⇐5
Download:
Mirror Download [FCC.gov]
Document ID112193
Application ID8KEc0x5RZpo6Ff43tlfqyQ==
Document DescriptionUser Instructions
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize58.12kB (726529 bits)
Date Submitted2000-08-07 00:00:00
Date Available2000-09-11 00:00:00
Creation Date2000-08-07 16:34:40
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2000-08-07 16:34:42
Document TitleUser Instructions
FCC ID Filing: O6E70112B

Navigation menu