Mikrotikls SIA LHG5NDM RouterBOARD LHG 5nD Wireless Module User Manual

Mikrotikls SIA RouterBOARD LHG 5nD Wireless Module Users manual

a href="https://usermanual.wiki/Mikrotikls-SIA" itemprop="url"> Mikrotikls SIA >

Users manual

LHG seriesThe LHG is an outdoor wireless router with a built-in directional antenna. It can be used as a CPE or for point to point links (use RouterOS wireless mode “bridge” to work as a single-client AP for point to point scenarios). AssemblyAttach the two legs to the LHG case, then snap the assembled LHG unit to the grid in the appropriate locations. Fix the legs in place with two self thread screws (Included, use Phillips screw driver PH2). The package also contains a grounding cable connector, and a 5 degree angle adapter. More detailed instructions available on the product page on https://mikrotik.com/products/.Connecting1. Open the ethernet door to connect an ethernet cable to the ethernet port, connect the other end of the ethernet cable to the included PoE injector.2. Plug the PoE injector into your network switch or ISP internet outlet.3. Plug the included power supply into the PoE injector to start up the device.4. Set LAN computer IP configuration to automatic (DHCP).5. Default IP address of the unit is 192.168.88.1, open this address in your web browser to start configuration. The username is adminand there is no password.The device is preconfigured as a wireless client and all you need to do is select the AP to connect to and set a device password. You can do this in the QuickSet tab that is opened by default. In case IP connection is not available, Winbox can be used to connect to the MAC address of the device. In case you wish to boot the device from network, for example to use MikroTik Netinstall, hold the RESET button of the device when starting it, until the LED light turns off, then the device will start to look for Netinstall servers.More information about using RouterOS and connecting to this device in our documentation: http://mt.lv/helpPoweringThe device accepts powering only from Passive PoE injectors.Extension slots and portsOne 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X), so you can use either straight or cross-over cables for connecting to other network devices. One Integrated 2x2 MIMO wireless device with built-in grid antenna.Buttons and jumpersThe reset button has three functions:•Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).•Keep holding for 5 more seconds, LED turns solid, release now to turn on CAPs mode (total 10 seconds).•Or keep holding the button for 5 more seconds until until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15 seconds).Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to thedevice. Useful for RouterBOOT debugging and recovery.The device includes a grounding connection (marked )⏚ which you should connect to the grounding installation of the tower or building where the device will be used. This is to substantially reduce risk of ESD and lightning damage.Operating system supportThe device supports RouterOS software with the version number at or above what is indicated in the RouterOS menu /system resource. Other operating systems have not been tested. See https://www.mikrotik.com/ for more information or contact support@mikrotik.com 20-Oct-17
Download:
Mirror Download [FCC.gov]
Document ID3618945
Application IDAyza+1c8HDqy/ezQMnAPHg==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize11.62kB (145222 bits)
Date Submitted2017-10-26 00:00:00
Date Available2017-12-10 00:00:00
Creation Date2017-10-20 13:33:10
Producing SoftwareLibreOffice 5.4
Document Lastmod0000-00-00 00:00:00
Document TitleUsers manual
Document CreatorWriter
Document Author: Normis
FCC ID Filing: TV7LHG5NDM

Navigation menu