Mitel Networks AQUA IP telephone set with Bluetooth User Manual
Mitel Networks IP telephone set with Bluetooth 6873i SIP IP Phone Installation Guide
a href="https://usermanual.wiki/Mitel-Networks" itemprop="url">
Mitel Networks >
User Manual
![2Important Safety Instructions and PrecautionsWARNING: DO NOT CONNECT DIRECTLY TO THE PUBLIC SWITCHED TELEPHONE NETWORK (PSTN). ANY CONNECTION OF THIS PHONE TO AN OFF PREMISE APPLICATION, AN OUT OF PLANT APPLICATION, ANY OTHER EXPOSED PLANT APPLICATION, OR TO ANY EQUIPMENT OTHER THAN THE INTENDED APPLICATION MAY RESULT IN A SAFETY HAZARD, AND/OR DEFECTIVE OPERATION, AND/OR EQUIPMENT DAMAGE. ‚"EXPOSED PLANT" MEANS WHERE ANY PORTION OF THE CIRCUIT IS SUBJECT TO ACCIDENTAL CONTACT WITH ELECTRIC LIGHTING OR POWER CONDUCTORS OPERATING AT A VOLTAGE EXCEEDING 300 V BETWEEN CONDUCTORS OR IS SUBJECT TO LIGHTNING STRIKES.WARNING: THE SOCKET OUTLET, IF USED, SHALL BE LOCATED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE BY THE USER.WARNING: USE MITEL APPROVED POWER ADAPTER PART NUMBER 85900020.NOTE:SOME IP PHONES DO NOT REQUIRE AN AC POWER ADAPTER. IF POWER OVER THE LAN IS AVAILABLE, IT SHALL BE COMPLIANT WITH IEEE 802.3af OR 802.3at (NEGOTIATED AS REQUIRED.)WARNING: THE HANDSET SUPPLIED WITH THE IP PHONE IS NOT CERTIFIED FOR USE WITH ANY OTHER PHONE. USE OF THE HANDSET WITH ANY OTHER PHONE MAY HAVE THE POTENTIAL TO CAUSE HEARING LOSS IN THE EVENT OF A LIGHTNING STRIKE ON THE OUTSIDE PLANT WIRING. THIS PRODUCT’S HANDSET EARCAP REGION IS SLIGHTLY MAGNETIC AND MAY PICK UP SMALL METALLIC OBJECTS, SUCH AS 26/6 GAUGE STAPLES. PLEASE CHECK THE EARCAP REGION FOR METALLIC OBJECTS BEFORE USE.When using your phone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:• Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.• Avoid using a phone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.• Do not use the phone to report a gas leak in the vicinity of a leak.Maintenance and Repair: There are no user serviceable parts inside the phones. For repairs, return the phone to an authorized Mitel dealer.These notices may appear on the product or in the technical documentation:This symbol may appear on the product: DescriptionCongratulations on your purchase of the Mitel Model 6873i! The 6873i is a SIP phone that boasts a large high resolution color touchscreen display and delivers outstanding audio performance designed for power users who demand a lot from their phones. Supporting today’s high speed networks through dual Gigabit Ethernet ports, the 6873i offers a large 7" color backlit LCD touchscreen display, 48 programmable top softkeys, 30 programmable context sensitive bottom softkeys, and native USB and Bluetooth headset support. Offering remarkable HD wideband audio, an enhanced speakerphone that utilizes dual microphones, advanced audio processing and a unique audio design, the Mitel 6873i delivers rich and crystal clear handsfree conversations. With its fully customizable hard key layout, XML capabilities, and a PoE class 3 rating, the 6873i is one of the most advanced SIP desktop phones available on the market today.Phone Features• 7" WVGA (800x480) color TFT capacitive touch LCD• Built-in-two-port, 10/100/1000 Gigabit Ethernet switch - lets you share a connection with your computer• USB 2.0 port (500mA maximum)• 48 top and 30 bottom softkeys• Press-and-hold speeddial key configuration feature• Supports 2 hard line keys with LEDs (additional line keys programmable via softkeys)• Wideband handset • Wideband, full-duplex speakerphone for handsfree calls• USB and Bluetooth headset support• AC power adapter (sold separately)• Enhanced busy lamp fields*• Set paging**Availability of feature dependant on your phone system or service provider.Supporting DocumentationTo access phone and system-specific documentation: 1. In your browser, go to www.mitel.com.2. Click Product Manuals under the Support section3. Select PDF Guides and Online Help under the End User Documentsdrop-down menu.4. In the left-hand menu, navigate to SIP Phones.Requirements• SIP-based IP PBX system or network installed and running with a SIP account created for the 6873i phone.• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps] recommended).• Category 5/5e straight-through cabling (Category 6 straight-through cabling required for optimum Gigabit Ethernet performance).• For Ethernet networks that supply inline power to the phone (IEEE 802.3af/802.3at) use an Ethernet cable to connect from the phone directly to the network for power (no 48V AC power adapter required if using Power-over-Ethernet [PoE]).• For Ethernet networks that DO NOT supply power to the phone use only the Mitel approved power adaptor to connect from the DC power port on the phone to a power source or use a PoE power injector or a PoE switch.DANGER Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.WARNING Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.CAUTION Caution indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and/or damage to the equipment or property.The exclamation point within an equilateral triangle indicates that important operating and maintenance (servicing) instructions are included in the literature accompanying the product.!](https://usermanual.wiki/Mitel-Networks/AQUA/User-Guide-2771014-Page-2.png)