Mobile Communications BST22030 Dual Band Bi-directional Booster User Manual Rev

Download:
Mirror Download [FCC.gov]
Document ID	2210041
Application ID	86VAExe+V7/ZKUnMupFn+g==
Document Description	Users Manual Rev
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	91.79kB (1147417 bits)
Date Submitted	2014-03-07 00:00:00
Date Available	2014-06-24 00:00:00
Creation Date	2017-10-23 17:26:27
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-23 17:26:27
Document Title	Users Manual Rev
Document Creator	Calc
Document Author:	John.v

Mar/mum Power
Ce/M/ar Boos/er
Series: BST220-23
For use with:
26, 3G & 46 Cellular Devices
The BST220-23 Dual Band RX/TX 800/1900Mhz
Signal Booster with Smoothtalker proprietary
" Stealthtech Signal Technology "
Increases your Cellular and PCS Band Signals, expands your service
coverage area, enhances voice call quality and significantly increases
Data speeds
The Intelligent CPU monitors the environment in which the amplifier is
operating and continuously adjusts itself to prevent Oscillation and also
automatically prevents any RX/TX overload to both the Cell Phone and
Cellular Tower while giving you maximum signal improvement. It is easy and
simple to install and you can be up and running in minutes
This is a CONSUMER device
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider
and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some
providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified by the manufacturer.
Antennas MUST be installed at least 20 cm (8 inches) from any person.
You MUST cease operating this device Immediately If requested by the FCC or a licensed Wireless service
provider.
WARNING. E911 locator Information may not be provided or may be Inaccurate for
calls served by using this device.
In al Setug Assembly & Installation
irst make sure that no power is connected to the booster. Connect the inside antenna or cell phone
holder, the outside antenna and power supply to the booster. Please make sure to connect each item in
to the correct ports as indicated on the booster.
2—Place the antenna on the outside of the vehicle and keep it separated as far as possible from or cellular
device holder.
3-Turn the power switch to ON position and the single Green LED on the side of the unit will become
Green constant ON to indicate that pwr is reaching the unit and that the unit is turned on.
Operation: PLEASE NOTE: It Is normal for the booster to be qute warm during cell phone "In use” state.
Smoothtalker Mobile CX1
LED Light Indicators on
Panel Label:
EST220-23
Orange LED Lights (RX):
There two orange LED lights, one for the 800MHz cellular band and one for the 1900MH2 PCS band.
LED ON state indicates that the RX (Receive Signal) function of the band is functioning normally.
LED Off state indicates that the band is shut down.
Green LED Lights (TX):
There lwo Green LED lights, one for the 800MHz cellular band and one for the 1900MHZ PCS band.
Solid ON state indicates that the TX (Transmit Signal) function of the indicated band is on and is at
maximum gain.
Flashing Green LED in either 800MHz or 1900MHZ indicates gain reduction in that band
Each flash equals 3db reduction in gain. One flash represents a 3dB reduction, two flashes represents
a EdB reduction etc. until the total gain of the booster has been suppressed.
Causes of Flashing Green LED Lights:
1-lf the outside antenna is located too close to the inside antenna or phone holder the booster will
reduce gain in order to suppress any oscillation (feedback loop) and the Green LED will flash. To
achieve higher gain or max gain further separation of the inside and outside antennas is required.
2-lf the booster is close to a cellular tower (Strong cell tower signal ) it will automatically reduce its gain
to protect the network. This condition will change as the booster approaches or leaves a cellular tower.
This is normal and cannot be defeated or altered by the user.
Typical Vehicle and Machine to Machine Installations
BST22023 with phone in holder BST22015 direct connect to modem
(shown with CLA tyne power supply) (shown with AC/DC supply)
Figl Fig2
All parts shown may or may not be included depending on the
Smothtalker Booster Kit part number configuration
Cable to connect holder
or data device to booster
4%
DCHBi: DC 6V Power
Supply‘ Install type
Outside Antenna
DCHBCsw: DC 6V Power Cigar
Socket type Adapter
To comply with FCC rules, this booster must only be operated with
cables, antennas and coupling devices that have been approved for
use with this equipment
For specifications of any of the Smoothalker FCC approved part numbers listed below visit
smoothtalker.com
Authorized Magnetic base Antennas
SEM244MMF
SEMZMX, SEMZMF
SEM11MX. SEM11MF
SEM15MX, SEM15MF
SEMZMaX. SEMZMaF
SEM1iMaX, SEM11MaF
SEM15MaX, SEM15MaF
SEMZMaXL, SEMZMaFL
SEM1iMaXL, SEM11MaFL
SEM15MaXL, SEM15MaFL
SEMZLGMX, SEMZLGMF
SEM1iLGMX,SEM11LGMF
SEM15LGMX, SEM15LGMF
SEMZGLGMX, SEMZBLGMF
SEM2LGMXL, SEM2LGMFL
SEM11LGMXL, SEM11LGMFL
SEM15LGMXL, SEM15LGMFL
SEMZGLGMXL, SEMZGLGMFL
Authorized directional Antennas
SEMDiXL,SEMD1FL
SEMDAZXL, SEMDAZFL
Authorized thru-hole Antennas
SEMZTHX, SEMZTHF
SEM11THX,SEM11THF
SEM15THX, SEM15THF
SEMZBTHX, SEMZGTHF
SEMZTHXL, SEMZTHFL
SEM11THXL, SEM11THFL
SEM15THXL,SEM15THFL
SEMZBTHXL, SEMZBTHFL
Authorized Coupling devices
BTH series cellular device
holders
Authorized Cu-ax Cables
ACX100
ACXQDO
AC series device connection cables
f- 55 577700177 Eirem
Mar/2770777 Power
Ce/flI/a/ Boos/er
BST220-23 Specifications
Operational Bands 300MHz Cellular and 1900MHz PCS
Impedance 50 Ohms
Gain 23dB
Output Power 1 watt EIRP
Oscillation Control (Automatic) Dynamic 1db steps
Oscillation Control Timing < 1 sec
RX High Power Control Dynamic Lip and down < 50 milliseconds
TX High Power Control Dynamic up and down < 50 milliseconds
Current Draw @ 12v 0.5 Amp - 0.3 Amp
Voltage 6V
Noise Figure < SdB
Operating Temperature -32F to +35F
Outside Antenna Connector FME Male
Inside Antenna Connector MCT Male
Dimensions 6.25x3.5x1.125 inches
Weight 1.0 Lb
FCC ID (2014 rules) S4RBST22030
Important:
1-Use only the power supply included with the booster. Connecting any other power supply at
any time will result in damage to the booster and will void the warranty.
2—Do not turn on the power switch until ALL cables have been screwed or plugged into the
booster or you can cause damage to the booster.
Salt is the user's/operator's responsibility to maintain a minimum distance of 8 inches
separation from the antennas to any person.
Notes:
1-This booster is not user configurable. User changes are a violation under FCC rules and
will void the user's aLthority to operate the equipment.
2—User changes changes or modifications Will void warranty.
Warranty: 2 Year on manufacturing defects.
Does not include misuse or customer damage
Original Bill of Sale is required for all Warranty Claims
Contact us at: smoothtalker.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : John.v
Create Date                     : 2014:03:04 14:56:36-05:00
Modify Date                     : 2014:03:04 17:17:48-08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : John.v
Creator Tool                    : Calc
Metadata Date                   : 2014:03:04 17:17:48-08:00
Producer                        : LibreOffice 4.1
Document ID                     : uuid:0694e6a7-eb30-4b0c-b196-c9c3f71c669e
Instance ID                     : uuid:d5083bb6-2d8c-4c78-8507-9e699b6b993b
Page Layout                     : OneColumn
Page Count                      : 4

EXIF Metadata provided by EXIF.tools