Motorola Mobility T6NJ1 Satellite Transceiver - Mobile User Manual

Motorola Mobility LLC Satellite Transceiver - Mobile 1 Scope

a href="https://usermanual.wiki/Motorola-Mobility" itemprop="url"> Motorola Mobility >

New user manual

PRELIMINARY DRAFT.SHEET1Motorola Satellite Series 9522L-Band TransceiverFact Sheets
PRELIMINARY DRAFT.SHEET2Motorola Satellite Series 9522L-Band TransceiverFact Sheets1 Product OverviewThe 9522 LBT is intended for incorporation into a final Iridium subscriber product that would supply power,provide an antenna, and provide user interface components such as a keypad, display, microphone, and speaker. Ifthe final product supports a data mode, an RS232 data interface would also be included.Regulatory approval for FCC, Canada and CE will be provided for the 9522 LBT assuming an antenna with a gainof ≤3 dBi. This will allow the 9522 LBT to be integrated into a variety of subscriber products, as well as retrofittedinto existing LBT-based subscriber products. These products, when integrated together will require Regulatorytesting.The functional capabilities of the 9505 handset provide the baseline for the 9522 LBT, noting that user interfacecomponents must be added to the 9522 LBT in order to access such functionality. The ISU AT CommandReference and the Satellite Series 9505 Portable Telephone User’s Guide provide information relevant to the 9522LBT’s functional capabilities.The following differences exist when comparing the functional capabilities of the 9522 LBT to the 9505 handset.• The 9522 LBT is always powered externally and therefore has no battery metering.• The 9522 LBT does not incorporate a vibrating call alert and therefore has no vibrate/ring control.• The 9522 LBT incorporates an analog audio interface not present on the 9505 handset.2 Standards ComplianceThe 9522 LBT has been designed to comply with the standards for Emissions Compliance, ElectromagneticCompatibility, Electromagnetic Safety, and AC Safety in the United States, Europe and Canada. Standards in otherareas of the world are often the same.2.1 FCC ComplianceThis device has been certified under 47 CFR Part 25 as FCC ID: IHDT6NJ1 and also complies with Part 15 of theFCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any changesor modifications, including the use of a non-standard antenna, not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.IMPORTANT: To comply with FCC RF exposure requirements, a minimum separation of 20 cm is requiredbetween the antenna and all persons.2.2 CE ComplianceThis product, when marked with the CE symbol, complies with the European Community Council Directive forR&TTE, 99/5/EC, provided the installer/user adheres to the instructions detailed in the Interface specification.Thisproduct is in compliance with applicable ETSI standards. Compliance with the requirements of ETSI EN 301 489requires the use of a shielded digital data interface cable.
Download:
Mirror Download [FCC.gov]
Document ID254802
Application ID1nBZU+pliKJz3urHC+B6cw==
Document DescriptionNew user manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8kB (100030 bits)
Date Submitted2002-07-08 00:00:00
Date Available2002-04-26 00:00:00
Creation Date2002-06-18 08:43:24
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2002-06-18 08:43:58
Document Title1 Scope
Document CreatorMicrosoft Word 9.0
Document Author: p17239
FCC ID Filing: IHDT6NJ1

Navigation menu