Motorola Solutions 89FT6020 Operational Critical Wireless Earpiece PTT User Manual MN004867A01
Motorola Solutions, Inc. Operational Critical Wireless Earpiece PTT MN004867A01
Contents
- 1. Manual
- 2. RF Safety Manual
Manual
MN004867A01.fm Page 1 Thursday, May 24, 2018 11:32 AM OCW-E100 Operation Critical Wireless Earpiece PTT PMLN7851 *MN004867A01* MN004867A01-AA OPERATIONAL CRITICAL WIRELESS EARPIECE PTT PMLN7851 Congratulations on your new Motorola Solutions Operation Critical Wireless (OCW) Earpiece PTT! This earpiece device is designed to allow you the convenience of Bluetooth technology by enabling you to comfortably wear it for long periods of time. Furthermore, the Bluetooth earpiece is exclusively designed with PTT functionality for business radio applications and optimized to work with Motorola Solutions two-way radio and Motorola Solutions applications. This user guide contains the operation and pairing instructions of the earpiece. Before getting started, please make sure you read and understand the RF and Acoustic Safety sections, which contain very important information about this product. FOREWORD Product Safety and RF Exposure Compliance Before using this product, read the operating instructions for safe usage contained in the RF Energy Exposure and Caution Product Safety Guide enclosed with your radio. en-US MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2018 Motorola Solutions, Inc. All rights reserved. Printed in FCC: AZ489FT6020 IC: 109U-89FT6020 Operation LMR Activation LED Tone Prompt LMR Press MFB for 2 to 3 seconds Flashing blue for 7 cycles N/A "LMR" followed by "Battery High (or Medium or Low)" LTE Press MFB and Vol + together for 2 to 3 seconds Flashing blue twice N/A for 3 cycles "LTE" followed by "Battery High (or Medium or Low)" To power off device: 1. Press the MFB button for more than 3 seconds. A “Power Off” prompt sounds. The LED turns off. PAIRING YOUR DEVICE To put device into discoverable mode for pairing: 1. Make sure that the device is at power off state. expected temperatures can exceed this range such as inside a parked car. • Storing your fully charged accessory in high-temperature conditions may permanently reduce the life of the internal battery. • Battery life may temporarily shorten in low temperature conditions. Activation LED Tone Prompt Press MFB for 5 to 6 seconds Flashing blue for 7 N/A cycles "LMR", "Battery High/Medium/ Low”, “Pairing” Press MFB and Vol + together for 5 to 6 seconds Flashing blue twice N/A for 3 cycles "LTE", "Battery High/Medium/ Low”, “Pairing” 2. Blue LED flashes alternatively. 3. Device remains in discoverable mode for 180 seconds. Host (a radio or phone) completing the process successfully connects to the device. If you cannot connect to the earpiece: 1. Turn off your smart phone Bluetooth function and turn on again. 2. Restart your smart phone, try to pair and reconnect. OPERATING YOUR DEVICE LMR mode Device can perform PTT function with a Motorola Solutions LMR radios. After device connects to a radio, pressing PTT button enables one-way communication such that voice taken from local microphone can be transmitted to the remote radio. Releasing the PTT button puts the device back to (default) stand-by mode and audio transmitted from the remote radio can be heard from the local speaker. LTE mode When device connects to a smartphone in LTE mode, it can function as a standard Bluetooth headset that supports phone conversation and stereo music listening. In addition, if Motorola Solutions APP is running (on either iOS or Android platform), it can work as a PTT device similar to radio use case. The following table shows user interfaces with different functions. Operation Activation Answer call Click MFB Single tone Reject call Long-press MFB (>1s) Exit tone Click MFB Exit tone End call LED Tone Play/pause Click MFB Skip forward Double click Vol+ Skip backhand Double- click Vol- Volume up (repeat) Click Vol+ (Press Vol+) Step tone Volume Down (repeat) Click Vol(Press Vol-) Step tone Heartbeat Blue Prompt Left Microphone Speaker To protect your hearing: • Use the lowest volume necessary to do your job. • Turn up the volume only if you are in noisy surroundings. • Turn down the volume before adding headset or earpiece. • Limit the amount of time you use headsets or earpieces at high volume. GETTING STARTED Before you start, make sure that the earpiece is fully charged. Recommended charging time is two (2) hours. Operation Activation LED Maximum When volume Volume 12 is reached reached Minimum Volume reached When volume 0 is reached Paired Tone Prompt Double tone Heartbeat Double tone Blue Paired Your headset is connected Disconnected Solid Blue Your headset is disconnected Idle Solid Blue Heart beat Blue Lost Connection Critical Low Battery Volume Button MFB (MultiFunction Button) Status Indicator Right USB Charging Port CHARGING YOUR DEVICE Plugging in the USB charging cable to the device triggers charging activity. LED color remains red throughout the charging process and turns into solid green when battery is fully charged. Device must be turned off during charging. WARRANTY Connected Reconnecting PTT (Push-to-Talk) ACOUSTIC SAFETY Important Information: • Do not charge your accessory in temperatures below 0 °C (32 °F) or above 45 °C (113 °F). Do not store your accessory in direct sunlight or where OPERATIONAL CRITICAL WIRELESS EARPIECE PTT OVERVIEW Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. DRAFT The radio is restricted to occupational use only to satisfy ICNIRP/FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the RF Energy Exposure and Product LTE Operation Battery Information: Battery is shipped with a nominal charge between 30% and 50%. Battery should be stored between -10 °C (14 °F) and 30 °C (86 °F) to minimize permanent capacity loss. Caution: Storing your fully charged accessory in high-temperature conditions may permanently reduce the life of the internal battery. Note: The battery is not a user replaceable part. ATTENTION! POWER ON/OFF YOUR DEVICE There are two operation modes, LMR and LTE. LMR mode is for device to work with a Motorola Solutions radio as a PTT device; and LTE mode is for device to work with a smartphone as a standard Bluetooth headset and as a PTT device (while working with Motorola Solutions APP). To power on device according to your preference, follow the following table: Safety Guide booklet enclosed with your radio (Motorola Solutions Publication part number 6881095C98 (US) or 6864117B25 (EMEA)) to ensure compliance with RF energy exposure limits. This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (3) Changes or modifications made to the device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this device. Power Off When earpiece detects low battery, the current LED color is changed from blue to red, and a "Battery Low" prompt sounds periodically. Motorola Solutions offers a standard one year warranty. Contact your Motorola Solutions dealer for detailed information on the standard warranty. Note: Warranty is void after customer replacement of any parts other than replacement parts listed. For more information about this product, please contact your Motorola Solutions Authorized Dealer or visit us at: www.motorolasolutions.com/bluetoothaccessories REPLACEMENT PARTS Part Number Description PMLN7940_ Small Earbud for OCW BT PTT PMLN7941_ Large Earbud for OCW BT PTT MN004867A01.fm Page 2 Monday, May 7, 2018 4:27 PM CONSIGNES DE SECURITY IMPORTANTES Expositionaux radio fréquences et sécurité du produit • Toute modification effectuée à cet appareil sans l'autorisation explicite de Motorola Solutions peut annuler l'autorisation d'utiliser cet appareil. Attention! Cette capteur ne doit être utilisée qu'à des finsprofessionnelles. Avant d'utiliser la radio, lisez leguide Radios bidirectionnelles portatives: expositionaux radiofréquences et sécurité du produit, quicontient d'importantes instructions de fonctionnementpour une utilisation sécuritaire et des informations surl'exposition aux fréquences radioélectriques, dans lebut d’assurer votre conformité aux normes etrèglements en vigueur. Avis aux utilisateurs (FCC et Industrie Canada) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence et à la partie 15 des règlements de la FCC. • Cet appareil ne doit pas causer d'interférence nuisible. • Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un fonctionnement indésirable. DRAFT
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : HBR738 Create Date : 2011:01:05 10:11:27Z Modify Date : 2018:06:01 10:28:38+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Creator Tool : FrameMaker 2015.0.3 Metadata Date : 2018:06:01 10:28:38+08:00 Producer : Acrobat Distiller 18.0 (Windows) Format : application/pdf Title : MN004867A01.fm Creator : HBR738 Document ID : uuid:ef1be3ed-160b-432d-abdc-cc2213124aff Instance ID : uuid:e98af7be-1764-448e-a55a-71c5781e6d10 Page Mode : UseNone Page Count : 2EXIF Metadata provided by EXIF.tools