Moxa WAPA003 IEEE 802.11a/b/g miniPCI module User Manual WAPA003 20151228

Download:
Mirror Download [FCC.gov]
Document ID	2861594
Application ID	zV661j3pahAmqsdMOSbFGQ==
Document Description	(WAPA003) UserMan_20151228
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.77kB (434615 bits)
Date Submitted	2016-01-04 00:00:00
Date Available	2016-01-04 00:00:00
Creation Date	2015-12-28 11:31:29
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-12-28 11:31:29
Document Title	Microsoft Word - _WAPA003_ User Manual_20151228
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Moxa IEEE 802.11b/g MiniPCI Module
WAPA003 User’s Manual
www.moxa.com
First Edition, June 2009
 2009 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.
WAPA003 User’s Manual
The hardware and software described in this manual is furnished under a license agreement and may be used
only in accordance with the terms of that agreement.
Copyright Notice
Copyright  2009 Moxa Inc.
All rights reserved.
Reproduction without permission is prohibited.
Trademarks
MOXA is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the
part of Moxa.
Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but
not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this
manual, or to the products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no
responsibility for its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the
publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll-free: 1-888-669-2872
Tel: +1-714-528-6777
Fax: +1-714-528-6778
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel: +86-21-5258-9955
Fax: +86-10-6872-3958
Moxa Europe:
Tel: +49-89-3 70 03 99-0
Fax: +49-89-3 70 03 99-99
Moxa Asia-Pacific:
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
Table of Contents
Chapter 1
Introduction
Overview
Features
Specification
Chapter 2
Getting Started
Module Layout
Block Diagram
Hardware Installation
Software Installation
WAPA003 User’s Manual
Introduction
Introduction
The following topics are covered in this chapter:

Overview

Features

Specifications
WAPA003 User’s Manual
Introduction
Overview
WAPA003 Mini-PCI Module is designed to provide wireless communication for all wireless
device based systems. It communicates via the standard 802.11b/g protocols. The WAPA003
uses the AR5414 wireless chipset from Atheros. This module is connected to the PCI bus
through a Mini-PCI connector and special circuitry to allow for compatibility with either 3.3V or 5V PCI
signaling.
Features



All-CMOS single chip for IEEE 802.11b/g compatible WLANs
No external VCOs or SAW filters needed
Baseband in-phase (I) and quadrature (Q) signals, converts them to the desired frequency,
and drives the RF signal off-chip

Integrated low-noise amplifier (LNA)

External PA and/or LNA can be used for special applications

Advanced wideband receiver with best path sequencer for better range and multipath resistance
than conventional equalizer-based designs

Extended tuning range (2.300-2.500) for worldwide use

High speed UART with DMA supports data rates up to 1 Mbps
WAPA003 User’s Manual
Introduction
Specification
Features
Chipset
Receive Sensitivity
Baseband
Processor
(BBP)
security engine
Bus Interface
Connectors
Power requirement
Dimension
Weight
Operating
Temperature
Storage
Temperature:
WAPA003
Atheros AR5414
802.11b :-84dBm(typically)
802.11g : -80dBm(typically)
˙ 802.11b support rate: 1M, 2M, 5.5M, 11M bps
˙ 802.11g support rate : 6M, 9M, 12M,18M,24M, 36M, 48M, 54M bps
˙ Modulation scheme: BPSK, QPSK, 16 QAM, 64 QAM, DBPSK,DQPSK, and CCK
˙ 802.11e-compatible bursting
˙ Support for draft IEEE h, i and j standards
˙ Atheros Extended Range feature supported (Turbo Mode), Atheros Super A/G mode
with up to 108 Mbps
WEP64,WEP128, WEP256, AES-CCM, TKIP ,WPS
Mini PCI standard bus complaint
Defined BTB connector is using 2x40 pins header, and Support Mini-PCI standard.
1.8V +/-5%
3.3V +/-10%
53mm ×32mm
15g
-40 to +80 ℃
-40 to +150℃
2
Getting Started
This chapter covers the module layout, and block diagram, hardware installation of the WAPA003. Software
installation is covered in the next chapter.
The following topics are covered:

Module Layout

Block Diagram

Hardware Installation

Software Installation
WAPA003 User’s Manual
Getting Started
Module Layout
Block Diagram
1. Below is a block diagram of the WAPA003. Primary board components are in bold, while external
connections are italicized.
2. Below is a diagram of DIVIDER 2D2325NW-KS. WAPA003 can via divider to share power to 2 antennas.
WAPA00
03 User’s Manual
Getting
g Started
WAPA003 User’s Manual
Connector Locations
Getting Started
WAPA003 User’s Manual
Getting Started
MiniPCI Bus Connector PIN Assignments
3.3V_CON
J1
AD0
AD1
AD2
AD3
AD4
AD5
AD6
3 AD0
5 AD1
7 AD2
AD3
3.3V
3.3V-2
3.3V-3
3.3V-4
3.3V-5
3.3V-6
11
AD4
10
12
14
13
AD5
AD7
AD8
15 AD6
17
AD7
AD9
19
AD8
AD10
21
AD9
AD11
AD12
AD13
23
AD10
AD14
AD15
AD16
AD17
AD18
AD19
GND-11
GND-12
GND-13
35
AD16
37
AD17
39 AD18
AD21
AD22
AD23
43
AD20
AD25
AD26
51
AD24
AD27
AD28
3.3V
R9
R8
187
3.3V
AD29
AD30
AD31
R0603 R0603
PCI_CBE0_L
PCI_CBE1_L
PCI_CBE2_L
PCI_CBE3_L
MPCI_11
MPCI_12
R0402
PCI_RST_L
RST#
CLK
CLKRUN#
INTA#
30
32
34
PCI_CLK
PCI_CLKRUN_L
PCI_INT_L
PCI_REQ_L
PCI_GNT_L
PCI_PERR_L
36
REQ#
GNT#
PERR#
38
40
42
PCI_PAR
PCI_IRDY _L
PAR
48
IRDY #
PCI_TRDY _L
50
TRDY #
53
AD25
AD26
55
57
AD27
59 AD28
61
AD29
AD30
63
PCI_FRAME_L
PCI_STOP_L
52
FRAME#
54
STOP#
GND-3
GND-4
GND-5
62
SERR#
DEVSEL#
64
5856
60
PCI_SERR_L
PCI_DEVSEL_L
66
PCI_IDSEL_L
IDSEL
69
GND-1
71 CBE0#
73 CBE1#
75 CBE2#
CBE3#
77
LED1-GRNP
79
22
24
26
46
65
AD31
67
GND
187
20
44
GND-15
47
AD22
49
AD23
3.3V_AUX
GND-14
45
AD21
AD24
R26
16
28
27
AD12
29
AD13
31 AD14
33 AD15
41
AD19
18
3.3VAUX
3.3VAUX-1
25
AD11
AD20
3.3V-7
3.3V-8
LED2-Y
ELP
DEFINE BOARD EDGE
68
PME#
GND-6
GND-7
GND-8
GND-9
78
LED1-GRNN
LED2-Y ELN
PCI_PME_L
70
72
74
76
RF_DISABLE
MPCI_14
80
GPIO_5
WAPA003 User’s Manual
Getting Started
Hardware Installation
The WAPA003 can be installed into all Moxa wireless system board series. It can be located
below the CPU.
Step for Installation
1. Attach the Main WLAN antenna to connector J1.
2. If using an Auxiliary WLAN antenna, attach it to connector J2.
3. Install the WAPA 003 miniPCI card on the system board. Apply pressure to both bus
connectors and gently press the board onto the stack. The board should slide into the matching
bus connectors. Do not attempt to force the board, as this can lead to bent/broken pins.
4. Screw on the WAPA003 miniPCI card.
5. If any power boards are to be stacked above the WAPA003, install them.
6. Screw on the all the necessary chassis.
Software Installation
After physically installing the WAPA003, your operating system must be configured to recognize
the new system board.
Step for Installation
1. Apply power to the system board.
2. Connect system board and PC with Ethernet cable.
3. Open a browser and type: 192.168.127.253 to open the system login webpage.
4. Login the webpage with default password: root in order to verify that all of the hardware is
install properly.
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WAPA003 User’s Manual
Getting Started
FCC Caution:
To assure continued compliance, (example - use only shielded interface cables when connecting to computer or
peripheral devices) any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
This module is restricted to mobile configuration. To comply with FCC RF exposure compliance requirements,
the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or
transmitter. This transmitter module must not be co-located or operating in conjunction with any other antenna
or transmitter
Antenna List
No. Manufacturer
Part No.
KINSUN
SMA-Male-RP (main)(aux)
KINSUN
Antenna Type Peak Gain
Dipole
2dBi for 2.4GHz
Dipole
5dBi for 2.4GHz
Dipole
6dBi for 2.4GHz
ANT-WSB-ANM-05
(main)(aux)
ANT-WDB-ANM-0609
KINSUN
(main)(aux)
Antenna Technology AT1515
Panel
11dBi for 2.4GHz
Antenna Technology AT1524
Panel
8dBi for 2.4GHz
Antenna Technology AT1539
Panel
14dBi for 2.4GHz
DIAMOND
Panel
14dBi for 2.4GHz
TK2632
Note:
1. The antenna of EUT conforms to FCC 15.203.
2. Only the higher gain antenna was tested and recorded in this report
3. Addition three new antenna (AT1515, AT1524, AT1539, TK2632), antenna gain is higher with the
original application.
4. No.6 (Antenna Technology / AT1539) and No.7(DIAMOND/ TK2632) are same antennas with
different marketing name.
Moxa Americas Inc.
Moxa Corporate Plaza
601 Valencia Avenue, #100
Brea, California 92823
Tel: 1‐888‐MOXA‐USA (1‐888‐669‐2872)
+1‐714‐528‐6777
Fax: +1‐714‐528‐6778
Email: usa@moxa.com
Web: www.moxa.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2015:12:28 11:31:29+08:00
Modify Date                     : 2015:12:28 11:31:29+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - _WAPA003_ User Manual_20151228
Creator                         : Administrator
Document ID                     : uuid:655afcc4-a4d0-4682-a394-c44c5bfb3cbd
Instance ID                     : uuid:97dc3a41-db08-4eb2-87a6-28e3b6b91972
Page Count                      : 13

EXIF Metadata provided by EXIF.tools