Music Tribe Commercial MY Sdn Bhd ULM200M01 Wireless Microphone User Manual Manual

MUSIC Group Services PH Corp Wireless Microphone Manual

Contents

Manual

ULM200USB/ULM202USB
Controls
ULM200USB/ULM202USB Controls
1. POWER/STATUS LED
2. W VOLUME Button (Mute/volume down)
3. V VOLUME Button (Power on/unmute/volume up)
4. USB connector
5. Wireless Link Status LED
ULM200USB/ULM202USB Getting Started
1. Connect the ULM200D wireless receiver to the “WIRELESS
ONLY!” USB connector on wireless-enabled BEHRIINGER mixers,
powered speakers or other compatible products, or to a USB
port on a computer.
2. Press and hold the
V
button on the ULM200M wireless
microphone to connect wirelessly to the ULM200D receiver.
The LED on the microphone will  ash slowly during the
connecting sequence and will light solid once connected.
If the ULM200M wireless microphone cannot connect to a
receiver, the microphone will automatically power down after
10 seconds.
3. Once connected, the ULM200M microphone will be set at
a medium volume. Use the
V
and
W
buttons to adjust
the volume
4. A long press of the
W
button will put the ULM200M
microphone into mute. The mute condition is indicated by
rapid  ashing of the LED. If the user does not unmute within
60 seconds, the ULM200M microphone will power down to
save battery life.
5. A short press of the
V
button will unmute the ULM200M
microphone. If the ULM200M microphone is unmuted more
than 10 seconds after muting, it will return to the previous
volume level, if unmuted after less than 10 seconds it will be
set to the minimum volume level.
6. Unplug the ULM200D wireless receiver to power down.
The ULM200M wireless microphone will power down
10 seconds after the ULM200D wireless receiver is unplugged.
7. The LED in the ULM200M wireless microphone will indicate
when the battery is low by regular brief  ashes.
8. Should the ULM200M wireless microphone become unpaired
with the ULM200D wireless receiver, the microphone can be
re-paired from the powered down state by simultaneously
pressing the
V
and
W
buttons and moving the microphone
to within 10 cm (4 inches) of the ULM200D wireless receiver.
The LED on the microphone will  ash slowly during the pairing
sequence and will light solid once connected. If the ULM200M
wireless microphone cannot pair to the receiver it will
automatically power down after 10 seconds.
(1)
(2) (3)
(5)(4)
Model: ULM200D
Type of product: Wireless Microphone
Model: ULM200M
Speci cation
RF output <100 mW / +20 dBm
Operating range 120 m (Line of Sight)*
Dynamic range 92 dB, A-weighted**
Equivalent input noise -112 dBu
Frequency Response 20 Hz - 20 kHz, ±1 dB
(Wireless Link)
Sampling rate 48 kHz
Resolution 24-bit
Encoding 232 kbps SLAC (Slightly
Lossy Audio Codec)
Latency 14.5 ms
RF frequency 2.4 GHz ISM band
(2406 MHz - 2474 MHz),
18 channels
Power Supply current 70 mA @ +5 VDC
Battery type 2 x AA (LR6)
Alkaline cells
Battery life >30 hours
Dimensions (W x D x H) 45.7 x 45.7 x 243.8 mm
(1.8 x 1.8 x 9.6")
Weight 0.4 kg (0.9 lbs)
*Achievable range will be dependent on nearby sources of RF interference and/
or line of sight obstacles.
**Measured from analog input to analog output, unity gain operation without
wireless compression.
ULM200USB/ULM202USB
Controles
ULM200USB/ULM202USB Controles
1. Piloto de encendido/estado POWER/STATUS
2. Botón W VOLUME (anulación/reducción de volumen)
3. Botón V VOLUME (Encendido/aumento de volumen)
4. Conector USB
5. Piloto de estado de enlace inalámbrico
ULM200USB/ULM202USB Puesta en marcha
1. Connect the ULM200D wireless receiver to the “WIRELESS
ONLY!” USB connector on wireless-enabled BEHRIINGER mixers,
powered speakers or other compatible products, or to a USB
port on a computer.
2. Press and hold the
V
button on the ULM200M wireless
microphone to connect wirelessly to the ULM200D receiver.
The LED on the microphone will  ash slowly during the
connecting sequence and will light solid once connected.
If the ULM200M wireless microphone cannot connect to a
receiver, the microphone will automatically power down after
10 seconds.
3. Once connected, the ULM200M microphone will be set at
a medium volume. Use the
V
and
W
buttons to adjust
the volume
4. A long press of the
W
button will put the ULM200M
microphone into mute. The mute condition is indicated by
rapid  ashing of the LED. If the user does not unmute within
60 seconds, the ULM200M microphone will power down to
save battery life.
5. A short press of the
V
button will unmute the ULM200M
microphone. If the ULM200M microphone is unmuted more
than 10 seconds after muting, it will return to the previous
volume level, if unmuted after less than 10 seconds it will be
set to the minimum volume level.
6. Unplug the ULM200D wireless receiver to power down.
The ULM200M wireless microphone will power down
10 seconds after the ULM200D wireless receiver is unplugged.
7. The LED in the ULM200M wireless microphone will indicate
when the battery is low by regular brief  ashes.
8. Should the ULM200M wireless microphone become unpaired
with the ULM200D wireless receiver, the microphone can be
re-paired from the powered down state by simultaneously
pressing the
V
and
W
buttons and moving the microphone
to within 10 cm (4 inches) of the ULM200D wireless receiver.
The LED on the microphone will  ash slowly during the pairing
sequence and will light solid once connected. If the ULM200M
wireless microphone cannot pair to the receiver it will
automatically power down after 10 seconds.
Tipo de producto: Micrófono inalámbrico
(1)
(2) (3)
(5)(4)
Model: ULM200D
Model: ULM200M
ULM200USB/ULM202USB
Réglages
ULM200USB/ULM202USB Réglages
1. Témoin Led d’ÉTAT/ALIMENTATION
2. Bouton W VOLUME (couper/diminuer le volume)
3. Bouton V VOLUME (mise sous tension/augmenter
levolume)
4. Connecteur USB
5. Témoin Led d’état de la liaison sans  l
ULM200USB/ULM202USB Mise en œuvre
1. Connect the ULM200D wireless receiver to the “WIRELESS
ONLY!” USB connector on wireless-enabled BEHRIINGER mixers,
powered speakers or other compatible products, or to a USB
port on a computer.
2. Press and hold the
V
button on the ULM200M wireless
microphone to connect wirelessly to the ULM200D receiver.
The LED on the microphone will  ash slowly during the
connecting sequence and will light solid once connected.
If the ULM200M wireless microphone cannot connect to a
receiver, the microphone will automatically power down after
10 seconds.
3. Once connected, the ULM200M microphone will be set at
a medium volume. Use the
V
and
W
buttons to adjust
the volume
4. A long press of the
W
button will put the ULM200M
microphone into mute. The mute condition is indicated by
rapid  ashing of the LED. If the user does not unmute within
60 seconds, the ULM200M microphone will power down to
save battery life.
5. A short press of the
V
button will unmute the ULM200M
microphone. If the ULM200M microphone is unmuted more
than 10 seconds after muting, it will return to the previous
volume level, if unmuted after less than 10 seconds it will be
set to the minimum volume level.
6. Unplug the ULM200D wireless receiver to power down.
The ULM200M wireless microphone will power down
10 seconds after the ULM200D wireless receiver is unplugged.
7. The LED in the ULM200M wireless microphone will indicate
when the battery is low by regular brief  ashes.
8. Should the ULM200M wireless microphone become unpaired
with the ULM200D wireless receiver, the microphone can be
re-paired from the powered down state by simultaneously
pressing the
V
and
W
buttons and moving the microphone
to within 10 cm (4 inches) of the ULM200D wireless receiver.
The LED on the microphone will  ash slowly during the pairing
sequence and will light solid once connected. If the ULM200M
wireless microphone cannot pair to the receiver it will
automatically power down after 10 seconds.
Type de produit : micro sans l
(1)
(2) (3)
(5)(4)
Model: ULM200D
Model: ULM200M
ULM200USB/ULM202USB
Regler
ULM200USB/ULM202USB Regler
1. BETRIEB/STATUS-LED
2. W VOLUME-Taste (stummschalten/leiser)
3. V VOLUME-Taste (einschalten/lauter)
4. USB-Anschluss
5. Wireless Link Status-LED
ULM200USB/ULM202USB Erste Schritte
1. Connect the ULM200D wireless receiver to the “WIRELESS
ONLY!” USB connector on wireless-enabled BEHRIINGER mixers,
powered speakers or other compatible products, or to a USB
port on a computer.
2. Press and hold the
V
button on the ULM200M wireless
microphone to connect wirelessly to the ULM200D receiver.
The LED on the microphone will  ash slowly during the
connecting sequence and will light solid once connected.
If the ULM200M wireless microphone cannot connect to a
receiver, the microphone will automatically power down after
10 seconds.
3. Once connected, the ULM200M microphone will be set at
a medium volume. Use the
V
and
W
buttons to adjust
the volume
4. A long press of the
W
button will put the ULM200M
microphone into mute. The mute condition is indicated by
rapid  ashing of the LED. If the user does not unmute within
60 seconds, the ULM200M microphone will power down to
save battery life.
5. A short press of the
V
button will unmute the ULM200M
microphone. If the ULM200M microphone is unmuted more
than 10 seconds after muting, it will return to the previous
volume level, if unmuted after less than 10 seconds it will be
set to the minimum volume level.
6. Unplug the ULM200D wireless receiver to power down.
The ULM200M wireless microphone will power down
10 seconds after the ULM200D wireless receiver is unplugged.
7. The LED in the ULM200M wireless microphone will indicate
when the battery is low by regular brief  ashes.
8. Should the ULM200M wireless microphone become unpaired
with the ULM200D wireless receiver, the microphone can be
re-paired from the powered down state by simultaneously
pressing the
V
and
W
buttons and moving the microphone
to within 10 cm (4 inches) of the ULM200D wireless receiver.
The LED on the microphone will  ash slowly during the pairing
sequence and will light solid once connected. If the ULM200M
wireless microphone cannot pair to the receiver it will
automatically power down after 10 seconds.
Produkttyp: Drahtlosmikrofon
(1)
(2) (3)
(5)(4)
Model: ULM200D
Model: ULM200M
ULM200USB/ULM202USB
Controles
ULM200USB/ULM202USB Controles
1. LED POWER/STATUS
2. Botão de W VOLUME (Mute/abaixa o volume)
3. Botão de V VOLUME (Power on/aumenta o volume)
4. Conector USB
5. LED Status de Link Wireless (sem  o)
Primeiros Passos ULM200USB/ULM202USB
1. Connect the ULM200D wireless receiver to the “WIRELESS
ONLY!” USB connector on wireless-enabled BEHRIINGER
mixers, powered speakers or other compatible products, or
to a USB port on a computer.
2. Press and hold the
V
button on the ULM200M wireless
microphone to connect wirelessly to the ULM200D
receiver. The LED on the microphone will  ash slowly
during the connecting sequence and will light solid once
connected. If the ULM200M wireless microphone cannot
connect to a receiver, the microphone will automatically
power down after 10 seconds.
3. Once connected, the ULM200M microphone will be set at
a medium volume. Use the
V
and
W
buttons to adjust
the volume
4. A long press of the
W
button will put the ULM200M
microphone into mute. The mute condition is indicated
by rapid  ashing of the LED. If the user does not unmute
within 60 seconds, the ULM200M microphone will power
down to save battery life.
5. A short press of the
V
button will unmute the ULM200M
microphone. If the ULM200M microphone is unmuted
more than 10 seconds after muting, it will return to the
previous volume level, if unmuted after less than 10
seconds it will be set to the minimum volume level.
6. Unplug the ULM200D wireless receiver to power down.
The ULM200M wireless microphone will power down
10 seconds after the ULM200D wireless receiver is
unplugged.
7. The LED in the ULM200M wireless microphone will indicate
when the battery is low by regular brief  ashes.
8. Should the ULM200M wireless microphone become
unpaired with the ULM200D wireless receiver, the
microphone can be re-paired from the powered down
state by simultaneously pressing the
V
and
W
buttons and moving the microphone to within 10 cm (4
inches) of the ULM200D wireless receiver. The LED on the
microphone will  ash slowly during the pairing sequence
and will light solid once connected. If the ULM200M
wireless microphone cannot pair to the receiver it will
automatically power down after 10 seconds.
Tipo do produto: Microfone sem o
(1)
(2) (3)
(5)(4)
Model: ULM200D
Model: ULM200M
LEGAL DISCLAIMER
MUSIC Group accepts no liability for any loss which may be
su ered by any person who relies either wholly or in part upon
any description, photograph, or statement contained herein.
Technical speci cations, appearances and other information
are subject to change without notice. All trademarks are the
property of their respective owners. MIDAS, KLARK TEKNIK,
TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or
registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP
Ltd. 2014 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions
and additional information regarding MUSIC Group’s
Limited Warranty, please see complete details online at
music-group.com/warranty.
NEGACIÓN LEGAL
MUSIC Group no admite ningún tipo de responsabilidad por
cualquier daño o pérdida que pudiera sufrir cualquier persona
por con ar total o parcialmente en la descripciones, fotografías o
a rmaciones contenidas en este documento. Las especi caciones
técnicas, imágenes y otras informaciones contenidas en este
documento están sujetas a modi caciones sin previo aviso.
Todas las marcas comerciales que aparecen aquí son propiedad
de sus respectivos dueños. MIDAS, KLARK TEKNIK, TURBOSOUND,
BEHRINGER, BUGERA y DDA son marcas comerciales o marcas
registradas de MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2014 Reservados todos los derechos.
GARANTÍA LIMITADA
Si quiere conocer los detalles y condiciones aplicables de la
garantía así como información adicional sobre la Garantía
limitada de MUSIC group, consulte online toda la información
en la web music-group.com/warranty.
DÉNI LÉGAL
MUSIC Group ne peut être tenu pour responsable pour toute
perte pouvant être subie par toute personne se  ant en partie
ou en totalité à toute description, photographie ou a rmation
contenue dans ce document. Les caractéristiques, l’apparence
et d’autres informations peuvent faire l’objet de modi cations
sans noti cation. Toutes les marques appartiennent à leurs
propriétaires respectifs. MIDAS, KLARK TEKNIK, TURBOSOUND,
BEHRINGER, BUGERA et DDA sont des marques ou marques
déposées de MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2014 Tous droits réservés.
GARANTIE LIMITÉE
Pour connaître les termes et conditions de garantie applicables,
ainsi que les informations supplémentaires et détaillées sur
la Garantie Limitée de MUSIC Group, consultez le site Internet
music-group.com/warranty.
HAFTUNGSAUSSCHLUSS
MUSIC Group übernimmt keine Haftung für Verluste,
die Personen entstanden sind, die sich ganz oder teilweise
auf hier enthaltene Beschreibungen, Fotos oder Aussagen
verlassen haben. Technische Daten, Erscheinungsbild und andere
Informationen können ohne vorherige Ankündigung geändert
werden. Alle Warenzeichen sind Eigentum der jeweiligen
Inhaber. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER,
BUGERA und DDA sind Warenzeichen oder eingetragene
Warenzeichen der MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2014 Alle Rechte vorbehalten.
BESCHRÄNKTE GARANTIE
Die geltenden Garantiebedingungen und zusätzliche
Informationen bezüglich der von MUSIC Group
gewährten beschränkten Garantie  nden Sie online unter
music-group.com/warranty.
LEGAL RENUNCIANTE
O MUSIC Group não se responsabiliza por perda alguma que
possa ser sofrida por qualquer pessoa que dependa, seja de
maneira completa ou parcial, de qualquer descrição, fotogra a,
ou declaração aqui contidas. Dados técnicos, aparências e outras
informações estão sujeitas a modi cações sem aviso prévio.
Todas as marcas são propriedade de seus respectivos donos.
MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA e
DDA são marcas ou marcas registradas do MUSIC Group IP Ltd.
© MUSIC Group IP Ltd. 2014 Todos direitos reservados.
GARANTIA LIMITADA
Para obter os termos de garantia aplicáveis e condições e
informações adicionais a respeito da garantia limitada do
MUSIC group, favor veri car detalhes na íntegra através do
website music-group.com/warranty.
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Responsible Party Name: MUSIC Group Services
NV Inc.
Address: 5270 Procyon Street
Las Vegas, NV 89118
USA
Phone Number: +1 702 800 8290
ULTRALINK ULM200USB/ULM202USB
complies with the FCC rules as mentioned in the
followingparagraph:
This equipment has been tested and found to comply with
the limits for a ClassB digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the
followingmeasures:
•
• Reorient or relocate the receiving antenna
•
• Increase the separation between the equipment
and receiver
•
• Connect the equipment into an outlet on a circuit di erent
from that to which the receiver is connected
•
• Consult the dealer or an experienced radio/TV technician
forhelp
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Important information:
Changes or modi cations to the equipment not expressly
approved by MUSIC Group can void the user’s authority to use
the equipment.
Operation in the 2.4 GHz ISM (Industrial, Scienti c, Medical)
frequency band may be subject to interference from other
transmitting equipment operating in this band. In the
event of such interference, please verify and reassign the
transmitting channels of any potentially interfering
transmitting equipment.
ULTRALINK
ULM200USB/ULM202USB
We Hear You

Navigation menu