NBS Payment Solutions Division of NBS Technologies F2NRM6832C1 Wireless Point of Sale Terminal User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	109840
Application ID	yFdRHgNF7YVzVNgM6BYSJw==
Document Description	ex 9 Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.11kB (676419 bits)
Date Submitted	2000-07-20 00:00:00
Date Available	2000-10-24 00:00:00
Creation Date	2000-07-17 16:50:06
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	2000-07-17 16:51:07
Document Title	Manual.PDF
Document Creator	Microsoft Word
Document Author:	artb

Exhibit 9
MIST Freedom II-C
Wireless Point of Sale Device
FCC ID: O3JF2NRM6832C1
User’s Manual
JUNE 2000
APREL Project No:MISB-FREEDOM II NOVATEL CDPD-3421
MIST Freedom II-C
(CDPD)
User Manual
MIST Freedom II-C
Copyright © 1999 MIST Inc. All Rights Reserved.
MIST Part Number:
DOC9-5.5
Manual Revision:
1.1
Date of the document:
November 1999
FCC compliance statement (USA)
This device complies with the requirements in Part 15 of the FCC
Rules for a Class B digital device. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received,
including interference that may cause undesired
operation
WARNING:
Changes or modification to this unit not expressly approved
by the party responsible for compliance could void the
user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with
the limits of a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by on or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for
help.
WARNING:
To comply with FCC RF exposure requirements, this unit
must be operated with a minimum separation distance of
33mm(1-3/8 inches) between its antenna and a person's
body. The user's hand should not be placed directly next to
the antenna or at locations on the unit where the antenna is
connected, to ensure compliance with FCC RF exposure
limits.
Industry Canada Certification
This device complies with Industry Canada RSS119.
IC Class B compliance
This device complies with the Class B limits for radio noise
emissions as set out in the interference-causing equipment
standard entitled “Digital Apparatus”, ICES-003 of Industry
Canada
Important safety information
Remember to follow any special regulations governing the use of
the MIST FREEDOM II-C and always switch it off in areas where
radio devices are forbidden, or when it may cause interference or
danger. Any safety laws and regulations pertaining to the use of
cell phones and two-way radios will likely apply to your use of the
POS. We encourage you to follow such laws and regulations at
all times. In particular, please observe all restrictions on the use
of radio equipment in fuel depots (fuel storage and distribution
areas), chemical plants, where blasting operations are in
progress or in any other area in which restrictions on radio
transmissions are imposed.
The MIST FREEDOM II-C is not an FAA-approved electronic
device for use on aircraft. Switch off the POS when in an aircraft.
The effect of the use of the POS in an aircraft is unknown. Such
use may affect aircraft instrumentation, communication and
performance, may disrupt the network, and may be illegal.
Operation of any radio transmitting equipment, including the
POS, may interfere with the functionality of inadequately
protected medical devices, including pacemakers. Consult a
physician or the manufacturer of the medical device if you have
any questions.
Additionally, the effect of the radio signals from the POS on other
electronic systems, including those in your car (such as
electronic fuel-injection systems, electronic anti-skid braking
systems, and electronic cruise-control systems) is unknown and
malfunction of these systems may result.
Avoid using the POS in any environment requiring your full
attention, such as when driving a vehicle.
Do not use any accessory that is not manufactured or supplied
by MIST or an authorized MIST accessories supplier. Use of any
accessory that is not supplied or approved for use by MIST is not
permitted. Use only those battery types specified in this User’s
Guide. The use of any other may disable the POS and may be
dangerous.
Failure to observe all these instructions will void the Limited
Warranty, and may lead to suspension or denial of services to
the offender, or legal action, or both.
Table of Contents
Introduction …………………………….…………………… 8
At a Glance …………………………………………………... 9
Know your POS Device …………………………………..
11
Unpack your POS device package …………………..….. 12
Maintenance and Safety Information ………..………..…
13
Power Information …………………………………….……. 15
Connecting to the Serial Port …………………………….. 18
Operating the Integrated Printer...….…………………….. 19
Accessories …………………………………………………. 21
Introduction
Thank you for purchasing MIST FREEDOM II-C. We are
confident that the MIST FREEDOM II-C you purchased will meet
your exacting world-class quality standards. MIST FREEDOM IIC is a small, hand-held, wireless electronic transaction terminal
that communicates with a remote host computer via the wireless
network. MIST FREEDOM II allows several modem options for
communicating to different network systems, such as CDPD,
Mobitex, and DataTAC modem.
MIST’s goal is to design and build POS (Point of Sales) devices
with complete customer satisfaction in mind. To help ensure
trouble free operation of your device, please spend a few
minutes to read this manual carefully and follow its
recommendations.
At a Glance
Front View
At a Glance
Bottom Back View
10
Know your POS Device
Antenna: Extend for best performance.
Paper Exit: Print Receipts.
Paper Feed Button: Load a new paper roll or eject paper roll from the
printer.
LCD: Displays all the information and status of your device.
Power Key: Turns the device ON and OFF.
Menu Keys: Scroll through menu features.
Function Keys: Fast selection of features in your device.
Account Buttons: Choose the checking or saving account.
Command Keys: Enter command to your device.
Alphanumeric Keys: Enter number inputs.
Battery: Ni-Mh, 7.2V, 6AA, 1450mAh Battery Pack
Belt Knob Screw Hole: Installs the Belt Knob.
Power Jack: Provides the connection for a 9V DC, 1A Output
Unregulated Adapter.
Card Reader: Reads magnetic tracks from a card.
Serial Port: Provides the connection for an external serial peripherals.
11
Unpack your POS device package
You should have the following items in your package:
MIST
If you want to purchase other accessories for your MIST
FREEDOM II-C POS device, please visit our Web site
12
www.mistwireless.com, or contact your local sales
representative.
Maintenance and Safety Information
Please avoid exposure to following environment
excessive heat, or direct sunlight (your device
may be permanently damaged by extended
exposure to direct sunlight.)
excessive cold (please keep your device
between 0°C and 40°C)
excessive electrical noise (such as mobile
phone, motors and modem.)
sensitive electronic equipment and
potentially explosive atmosphere (such as
hospitals, health care facilities, aircraft, and
gas stations)
13
Maintenance and Safety Information
And please avoid the following actions.
Immersing the device in water.
Opening the device or replace any component.
(You will loose your software.)
Using the device with a damaged antenna.
(If your device has any problem, you must contact
your local sales representative or technical support
immediately.)
Keep all flames, sparks, and lit smoking
materials away from the battery.
14
Power Information
Battery
MIST FREEDOM II-C use NiMH 7.2V, 6AA Battery Pack.
(Please use only batteries provided by MIST.)
Battery Installation
1. Pull the battery door downward to open.
2.
Insert the battery in the device. (Ensure the metal contacts
touch)
3.
Close the battery door.
15
Power Information
Battery Maintenance
New battery’s full performance is achieved only
after two or three complete charge and discharge
cycles.
Keep the devices and batteries clean and dry.
Protect against a short circuit when the battery is
not installed in the device.
If the device will not be used for and extended
time, take the battery out of the device.
All rechargeable batteries have a limited life. If a
fully charged battery no longer provides an
acceptable performance, please replace with a
new battery from MIST.
16
Power Information
DC Adapter
MIST FREEDOM II-C can also use 9V, 1A Output Unregulated
DC Adapter.
*Please use only adapters provided by MIST. Use of other power
sources may result in damage to your unit.
Using the DC Adapter and the Internal Charger
Using the DC Adapter, you can plug your POS device directly
into a power supply and charge attached batteries. If you turn off
the device, the internal charger will charge the batteries
automatically. If you turn on the device, charging will take more
time. Charging will stop during radio transmission and printing.
1.
Plug the DC adapter into the power source.
2.
Plug the DC adapter into the Power Jack on the bottom of
the device.
17
Connection
Connecting to the Serial Port
Plug the Serial Cable into the Serial Port on the bottom of the
device, and plug the other end of the Serial Cable into the
peripheral in use.
* When unplugging the Serial Port from the device, please press
the Release Tabs to release the hooks.
18
Operating the Integrated Printer
Integrated Thermal Printer
MIST FREEDOM II-C integrates a thermal printer for the user to
print receipt.
1.
Press Paper Feed Button (on the top of the Display) to
make the printer sensor standby 60 sec for paper insert.
2.
Open the Paper Door at the back of the device.
19
Operating the Integrated Printer
3.
Insert the paper in the gap of the paper entrance.
4.
The sensor will feed the paper in the printer
automatically.
Make sure that the paper is overted as shown
above as the thermal paper will work only in one
direction. (If you do not see any printing, the paper
is in backwards, re-insert the other way around.)
Do not try to pull paper through the printer
manually.
If you want to eject paper from the device, you
must cut the paper from the paper roll, and press
the paper feed key to eject the rest of paper in the
device.
20
Accessories
MIST Inc. provides a useful accessory for your MIST FREEDOM
II-C. They can help you to improve the efficiency of your work.
Belt Clip and Belt Knob (AZF-2000)
By using a belt knob and a belt clip, the
MIST Freedom II can be attached to the
belt.
Vehicle Charger
MIST Freedom II can be charged in
vehicle with a Vehicle Charger.
(may not be exactly as shown)
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : Microsoft Word
Create Date                     : 2000:07:17 16:50:06
Title                           : Manual.PDF
Author                          : artb
Producer                        : Acrobat PDFWriter 4.0 for Windows
Modify Date                     : 2000:07:17 16:51:07-04:00
Page Count                      : 22

EXIF Metadata provided by EXIF.tools