NEC of America 7L1S11A Cellular WCDMA Phone with Bluetooth and RFID User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1089287
Application ID	qt9vYKPlVMX/6TwT3Ttw4A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	94.52kB (1181555 bits)
Date Submitted	2009-04-01 00:00:00
Date Available	2009-09-28 00:00:00
Creation Date	2009-02-18 17:14:21
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2009-03-31 14:59:09
Document Title	Users Manual
Document Creator	FrameMaker 7.1

N-04A_E.book
53 ページ
２００８年１２月１６日
火曜日
午後８時２０分
Voice/Videophone Calls
■ Making a Voice/Videophone Call
Making a Voice/Videophone Call ....................................................................................
Switching a Voice/Videophone Call during a Call (Caller) ..............................................
Making International Calls ......................................................................... WORLD CALL
Using Hands-free Call during a Call ............................................................... Hands-free
Clearing Earpiece Volume .................................................................... Hyper Clear Voice
Using the Redial/Dialed Calls/Received Calls Record..... Redial/Dialed calls/Received calls
Using Chaku-moji .......................................................................................... Chaku-moji
Setting Notifying/Withholding of Caller ID When Making a Call......................................
Sending Push Signals Quickly......................................................................... Pause dial
Using the Prefix Function................................................................................................
Setting Sub-addresses When Making Calls ...................................... Sub-address setting
Setting the Alarm Used for Reconnection.............................................. Reconnect signal
Blocking Out Ambient Noise .................................................................... Noise reduction
Making Hands-free Calls in the Car....................................................... In-car Hands-free
54
57
58
60
60
61
63
64
65
65
66
66
66
66
■ Receiving a Voice/Videophone Call
Receiving a Voice/Videophone Call ................................................................................
When the Other Party Switches a Voice/Videophone Call (Caller).................................
Using the Dial Keys to Answer a Call......................................................... Answer setting
Ending/Holding Calls with the FOMA Terminal Closed ...................... Setting when folded
Adjusting the Earpiece Volume............................................................................ Volume
Adjusting the Ring Volume............................................................................ Ring volume
67
68
68
69
69
69
■ Settings for when you cannot take calls
Holding the Ringing/Current Call ....................................................... Answer hold/Holding
Using the Public Mode ...................................................................................................
When You Cannot Answer a Received Call .................................................... Missed call
Having the Caller Leave a Message ....................................................... Record message
Having Callers Leave a Message during an Incoming Call ..................... Quick message
Playing/Erasing Recorded Messages and Voice Memos ...............................................
70
70
72
72
73
73
■ Setting the Videophone
Using Chara-den.............................................................................................................
Setting Functions for the Videophone.............................................................................
Using the Videophone Connecting to External Devices .................................................
74
75
77
53
N-04A_E.book
54 ページ
２００８年１２月１６日
Making a Voice/Videophone
Call
Voice/Videophone Calls
* As N-07A is not equipped with the front camera,
during a videophone call, you can send only the
substitute image (Chara-den) or image from the
rear camera to the other party. You can change
the substitute image (Chara-den) to other data
such as an image of My picture in “Select image”.
→ P.75
the phone number of the
1 Enter
other party
Always start by entering the
area code, even for calls
within the same area.
You can enter up to 80 digits
for the phone number.
However, only the last 26
digits are displayed.
火曜日
午後８時２０分
2 r (voice call), o (V.phone)

“ ” flashes while dialing
and lights up during the
call.
■ If you hear the busy
tone
The line is busy. Call again
after a while.
■ If you hear a message
In-call
saying that the other
Function menu P.56
party cannot be
reached
The other party’s mobile phone is not turned
on or is out of signal range. Call again after a
while.
■ If you hear a message requesting your
caller ID
Call again with caller ID notification enabled.
→ PP.51, 64

Enter phone number
Function menu P.56

■ To insert a number
Press v to move the cursor to the number to
the left of the position where you want to insert
the number, then enter the number.
■ To delete a number
Press v to move the cursor to the number you
want to delete, then press t.
Hold down t for 1 second or longer to delete
all the numbers to the left of the cursor and the
number in the cursor position.
■ To re-enter the number
Move the cursor to the beginning or end of the
number and hold down t for 1 second or
longer to return to the standby screen.

■ To change the substitute image (Charaden)
Xu (FUNC) “Select image” “Chara-den”
Select Chara-den
54
“
” flashes while dialing
a videophone call and
lights up during the call.
■ If a videophone call is
not connected → P.57
■ To switch between
substitute image and
camera image
(FUNC) “Substitute
image” ⇔ “Camera image”
Videophone in-call
Function menu P.56
■ To switch the main
screen
Xd (1 second or longer)
“Change main disp.” → P.56
■ To enlarge the camera image to be sent
Adjust the zoom using Xv
Zoom → P.227
■ To mute the voice to send
Xd [
The “
” icon is displayed.
To cancel muting, press Xd (
) again.
N-04A_E.book
55 ページ
２００８年１２月１６日
■ To switch the setting of Hyper Clear Voice
→ P.60
■ To switch a voice/videophone call during a
call → P.57
■ To put the current voice/videophone call
on hold → P.70
■ To switch between the FOMA terminal and
Bluetooth device (P.375)
r (1 second or longer)
3 To end the call, press y

z The Power saver mode is activated if you do not
execute touch operations and key operations for
15 seconds during a call.

z If you make a videophone call to an emergency
number (110, 119 or 118) from the FOMA
terminal, the call is automatically changed to a
voice call.
z You cannot receive i-mode mail or a MessageR/F
during a videophone call (you can receive SMS).
Received mail is kept at the i-mode Center and
can be retrieved using “Check new messages”
after the videophone call.
z Digital communication charges are still applied to
the caller when the substitute image is displayed
during a videophone call.
z During battery charge, if a videophone call and a
1Seg recording are going on simultaneously, a
camera-off message may appear and the Camera
may be turned off automatically depending on the
FOMA terminal temperature.
午後８時２０分
How to view the videophone screen
You can use the videophone call function
between the terminals that support the DOCOMO
videophone system.
z DOCOMO videophone conforms to “the 3G324M*2 standard set down in the international
3GPP*1 standards”. Your FOMA terminal
cannot connect to a videophone terminal that
uses a different system from DOCOMO
videophones.
*1: 3GPP (3rd Generation Partnership Project)
A regional standardization body established to
develop commonly applied technical
specifications for 3rd-generation mobile
communications systems (IMT-2000).
*2: 3G-324M
An international standard for 3rd-generation
mobile videophones.
■Videophone screen
①
③
②
④
①Main screen (Camera image of the other party
is displayed at the time of purchase)
②Sub-screen (Your own substitute image is
displayed at the time of purchase)
③ Call duration
④ Settings
: Hyper Clear Voice (Low/High)
: Sending or receiving voice/
Transmission error
: Sending or receiving video/
Transmission error
: Camera image/Substitute image/
Chara-den being transmitted
: Hands-free ON/OFF
(Blink): Muting
: Photo mode (Portrait/Scenery/
Close-up)
: Key operation mode (DTMF
mode*1/Whole action mode*2/
Parts action mode*2)
*1: “Send DTMF tone/DTMF tone OFF”→ P.56
*2: “Using Chara-den” →P.74
55
Voice/Videophone Calls
■ When the 2in1 is in Dual mode
The Outgoing number selection screen appears.
Select a phone number.
火曜日
N-04A_E.book
56 ページ
２００８年１２月１６日
Enter phone number screen
(P.54)
Notify Caller ID → P.64
Prefix numbers → P.65
Chaku-moji → P.63
Int’l call → P.59
Multi Number → P.401
Voice/Videophone Calls
Add to phonebook → P.81
Compose message*……Composes an i-mode mail
with a phone number pasted in the recipient field.
Select image……Selects the substitute image used
during a videophone call.
*: Not available when 2in1 is in B mode.
In-call screen (P.54)
火曜日
午後８時２０分
V.phone settings……Sets the screen for
videophone call.
Visual prefer.……Sets the image sent to and
received from the other party from “Normal/
Prefer img qual/Prefer motion spd”.
This setting is only retained during the call.
Brightness*……Five brightness levels (-2 to 0
to +2) are available.
White balance* → P.220 (an item of shooting
menu)
Color mode set*……Selects the image effect
from “Normal/Sepia/Monochrome”. This setting
is only retained during the call.
Photo mode* → P.220 (an item of shooting
menu)
Chara-den set.……You can set the followings when
Chara-den is used. This setting cannot be set for the
camera images.
Bluetooth/Phone……Switches between the FOMA
terminal and Bluetooth device (P.375).
Switch Chara-den, Action List, Change
Action → P.314 (Function menu item)
Choku-Den……The “Choku-Den screen” appears.
Switch image……Displays the image selected
in “Substitute image” (P.75) on the other party’s
display.
Phonebook……The “Phonebook list screen”
appears.
Received calls……The “Redial list screen” appears.
Display light……Specifies whether to keep the
backlight on or to turn it on according to what is set in
“Lighting” on “Backlight”.
Voice memo → P.363
Voice memo → P.363
Redial……The “Received calls list screen” appears.
Videophone in-call screen
(P.54)
Substitute image ⇔ Camera image……Switches
between the substitute image and the camera image.
Change main disp.……Changes the main display.
The screen changes in the order of “Displaying the
image from the other party’s camera on your main
screen.” → “Displaying the image from your own
camera on your main screen.” → “Displaying only the
image from the other party’s camera.” → “Displaying
only the image from your own camera.”
Bluetooth/Phone……Switches between the FOMA
terminal and Bluetooth device (P.375).
56
Own number……Displays your phone number
during a videophone call.
Send DTMF tone ⇔ DTMF tone OFF……Sets/
cancels push signal transmission mode during
Chara-den.
Except for Chara-den, videophone calls are always in
push signal transmission mode.
Change to voice → P.57
*: This function is not available when the transmission of a
substitute image is ON.
N-04A_E.book
57 ページ
２００８年１２月１６日
● If a videophone call is not connected
When a videophone call is not connected, the cause
of the failure appears.
z The cause may not appear depending on the
situation.
z Depending on the type of other party’s phone or the
possible lack of a network service subscription, the
reason may not accurately reflect the other party’s
actual status.
午後８時２０分
z If the videophone call is not connected, your call is
automatically switched to a voice call when you set
“Auto redial as voice” to “ON”. However, the call
may not be handled in this way if you call an ISDN
synchronous 64K access point, ISDN videophone
which does not support the 3G-324M standard (as
of December, 2008) or if you dial a wrong number.
Note that call charge may be applied in some
cases.
Cause
Check number
then redial
The called phone number is
not used
Busy
The line is busy
• This message may also
appear during packet
communication.
Busy with packet
transmission
The other party is using
packet communication
Out of service
area/power off
The other party is out of
service area or the phone is
turned off
Your call is being
forwarded
The call is being forwarded (A
Videophone call is made
when the forwarding number
is for a 3G-324M-compatible
videophone)
Redial using voice
call
The phone for the forwarding
number is not compatible with
videophone calls
Please activate
caller ID before
dialing again
The other party sets the
Caller ID request service
This number is not
available.
The other party sets the
Nuisance call blocking
service
Upper limit has
been exceeded
Connection failed
The upper limit set for a Limit
billing plan (Type Limit and
Family Wide Limit) is
exceeded
Connection failed
You connected without
notifying your caller ID (when
dialing into visualnet, etc.)
• This message may also
appear in other situations
Set the caller ID notification
to “ON” and retry
Please make your
call from the
i-mode web page
You attempted to make a
videophone call to watch
V-live without browsing the
i-mode official site
Switching a Voice/
Videophone Call during a Call
(Caller)
z You can use this function with the terminals
compatible with voice call/videophone call switch.
z You can switch the voice call only when you are the
caller.
z To switch the call, the receiver needs to set “Ntfy
switch-mode” to notify the switch beforehand.
→ P.75

screen (P.54)
1 In-call
“YES”
d (V.phone)
While switching, the screen which indicates that
the calls are being switched appears and the
voice guidance is played.
The digital communication
fee is charged after the
appearance of this screen.
Continued on next page
57
Voice/Videophone Calls
Display
火曜日
N-04A_E.book
58 ページ
２００８年１２月１６日
■ To switch a videophone call to a voice call
Videophone in-call screen (P.54) u (FUNC)
“Change to voice”
z It takes about 5 seconds to switch the calls. Note
火曜日
午後８時２０分
z This service is not available in some payment
plans.
For additional information regarding WORLD
CALL, refer to the contact information provided on
the back of the manual.
that the signal quality may affect how long it takes.
z You cannot switch the calls during calling in the
Voice/Videophone Calls
following cases:
• When the other party is holding the call
• When the other party activates Record
message
z The displayed call duration is reset to 0 second
each time the calls are switched. However, the
total time for voice and videophone call is
displayed after ending a call.
z Depending on the other party’s communication
conditions or the signal quality, you may not be
able to switch the calls and the call may be
canceled.
z When the call is switched, the first dialed or
received call is registered to the Redial/Dialed
calls records or Received calls records.

z If the caller is using i-mode, the i-mode
communication is canceled to switch to
videophone.
z If the other party is using packet communication
(including i-mode), you cannot switch the calls.
z You cannot switch the calls when “Call Waiting” is
activated.
Making International Calls

WORLD CALL is an international dialing service that
can be used from DOCOMO mobile phones.
FOMA service subscribers are also subscribed to
“WORLD CALL” when they subscribe to the FOMA
service. (This excludes subscribers who declared that
they did not require the service.)
z WORLD CALL can be used to call around 240
countries and regions worldwide.
z The “WORLD CALL” is charged with your monthly
call charges.
z In addition to dialing a phone number, you can
make an international call by adding “+” or
selecting “Int’l call” or “Prefix numbers” from the
function menu in the “Enter phone number screen”
and the detail screens of “Phonebook/Received
calls/Dialed calls/Redial” screens.
58
“International videophone calls” can be made to
users of some specific overseas 3G mobile
terminals by pressing o (V.phone) to make the
call after using the dialing procedure below.
z See the DOCOMO website for information on
accessible countries and operators.
z Depending on the other party’s terminal, the
image of the other party displayed on your
FOMA terminal may be distorted or the
connection may fail when making a international
videophone.
Using dial keys to make international
calls
the number in the following
1 Dial
order: 010 → Country code→ Area
code (Long distance code) → The
other party’s phone number
If the area code (long distance code) begins with
“0”, omit the first “0”. However, to call to ordinary
phones in Italy, “0” is required.
You can also make an international call by
dialing the number in the following order: 009130
→ 010 → Country code → Area code (Long
distance code) → The other party’s phone
number
2r
The international call is made.
Quick and simple procedures for
making an international call
z You can store the country codes and IDD prefix
codes in “Int’l dial assistance”.
● Using “+” to make an international call
By using the “+” that is automatically replaced with
the “IDD Prefix Code” set in the “Auto int’l call set.”,
you can make international calls without dialing the
IDD prefix code.
z As “Auto int’l call set.” in “Int’l dial assistance” is set
to “ON” (automatically added) at the time of
purchase, the FOMA terminal automatically dials
the IDD prefix code.
N-04A_E.book
59 ページ
２００８年１２月１６日
the standby screen, dial the
1 On
following; + (0 (1 second or
longer)) →Country code → Area
code (Long distance code)→The
other party’s phone number
If the area code (long distance code) begins with
“0”, omit the first “0”. However, to call to ordinary
phones in Italy, “0” is required.
■ To make a call without converting “+” into
the IDD prefix code
“Original phone No.”
■ To cancel the call
“Cancel”
● Making an international call from the
function menu
You can make an international call by adding a
country code and IDD prefix code from the function
menu.
z You can use the international dial function from the
“Enter phone number screen” and the detail
screens of “Phonebook/Received calls/Dialed calls/
Redial” screens.

Enter the phone number of the
other party
u (FUNC) “Int’l call” Select the
2 country
code Select the IDD
prefix code
The selected country code and IDD prefix code
are added. If the area code (long distance code)
begins with “0”, the first “0” is automatically
deleted (except when “Italy” is selected for the
country code).
午後８時２０分
Making the setting for the

international call
You can set the automatic conversion of “+”, and also
edit and store the country codes and IDD prefix code
for international calls.
i “SETTINGS/SERVICE”
1 “Dialing”
“Int’l dial assistance”
Select any item:
Auto int’l call set.……You can set the
automatic conversion of “+” when you make an
international call.
“ON” Select a country code Select an
IDD prefix code
■ When you do not convert automatically
“OFF”
Country Code setting……Stores up to 22
country names and country codes used when
you make an international call. See the
DOCOMO website for information on country
codes.
Highlight an item o (Edit) Enter the
country name Enter the country code
■ To delete a number
u (FUNC) “Delete” Selects the deleting
method
IDD Prefix setting……Stores the IDD prefix
name and IDD prefix code used when you make
an international call. Up to 3 entries can be
stored.
Highlight an item to be stored or
changed o (Edit) Enter the IDD prefix
name Enter the IDD prefix code
■ To delete a prefix
u (FUNC) Selects the deleting method
3r
The international call is made.
z Even if Caller ID Notification is active, the caller ID
may not appear properly depending on the
operator. In this case, calls cannot be made from
the Received calls screen.
59
Voice/Videophone Calls
“Dial”
2r
The international call is made.
火曜日
N-04A_E.book
60 ページ
２００８年１２月１６日
Using Hands-free Call during
a Call

o(
午後８時２０分
Clearing Earpiece Volume

You can hear the other party’s voice from the speaker
while talking.
screen (P.54)
1 In-call
“YES”
火曜日
Voice/Videophone Calls
“
” appears and you can hear other party’s
voice through a speaker during a hands-free
call.
While ringing, you can switch to hands-free
operation by pressing o (
⇔
).
This function detects ambient noise and enables you
to hear the other party’s voice clearly.
z When Hands-free is “ON” or an earphone/
microphone (optional) is connected, this function is
disabled.
screen (P.54)
1 In-call
p(
⇒
Ex. Voice call
Ex. Voice call
Ex. Videophone call
■ To cancel the hands-free operation
Press o (
) during a hands-free call
“
” disappears when you make a voice call.
“
” is changed to “
” in case of videophone.
● Notes on using the hands-free operation
It is recommended to keep a distance of about 30 cm
from the FOMA terminal during a hands-free call. If
the distance is longer or shorter than 30 cm, the other
party may find it difficult to hear you or your voice may
sound differently.
z Move to an area where your call will not disturb
other people before switching to a hands-free call.
z When a call is finished, the hands-free setting is
canceled.
60
⇒
“High” → “OFF” → “Low” switches each time you
press p.
Ex. Videophone call
High……Regardless of ambient noise level, the
function activates even in the quiet environment.
Low……The function activates only when the
ambient noise level is high.
OFF……This function does not apply.
■ To set from the main menu
i “SETTINGS/SERVICE” “Tallk” “Hyper
Clear Voice” “High”, “Low” or “OFF”
z The sound quality or volume changes by this
function, so set it depending on preference.
z The effects may be different depending on the
other party’s voice or the individual.
z This function works by the ambient noise that is
detected with a microphone in the FOMA terminal
(Phone), so it may work by your own voice.
N-04A_E.book
61 ページ
２００８年１２月１６日
Using the Redial/Dialed Calls/
Received Calls Record

● Checking the number of missed calls
■ To confirm only the missed calls from the
Received calls record
i “OWN DATA” “Received calls”
Total number of received calls, the number of missed
calls and the number of unconfirmed missed calls
appear.
When you select “Missed calls”, only the missed calls
appears.
■ Redial/Dialed calls/Received calls record icons
Icon*1

the standby screen j
1 On
(Redial), h (Received calls)
■ To check the Dialed
calls
i “OWN DATA”
“Dialed calls”
午後８時２０分
Description
Incoming and outgoing/missed/
unconfirmed missed voice calls
Incoming and outgoing/missed/
unconfirmed missed international
voice calls
Incoming and outgoing/missed/
unconfirmed missed videophone
calls
Incoming and outgoing/missed/
unconfirmed missed international
videophone calls
*2
Incoming and outgoing calls to B
mode for 2in1 setting
Recorded voice record message/
videophone message
Received calls with Chaku-moji
・
Ex. Redial (list)
Function menu P.62
Highlight the Redial/Received
calls record entry
■ To make a call after
checking the details of
the Redial/Received
calls record
Select the Redial/
Received calls record entry
Incoming and outgoing/missed/
unconfirmed missed packet
communication
Incoming and outgoing/missed/
unconfirmed missed 64K data
communication
Incoming packet communication
or 64K data communication that is
received without external device
connected
Incoming and outgoing calls when
the Time zone is other than
“GMT+09” regardless of the “Auto
time adjust” (P.51) setting (the
summer time is displayed when
you set the summer time)
Ex. Redial (detail)
*1: Some icons look different between the detail screen
and the list screen.
*2: Displayed only when the 2in1 is in Dual mode.
Function menu P.62
3 r (voice call), o (V.phone)
Continued on next page
61
Voice/Videophone Calls
Information on dialed or received calls, including the
caller’s phone number and the date and time are
stored in the Redial/Dialed calls/Received calls
record. You can make a call to the other party easily
by using these records.
z When you make calls to the same phone number
repeatedly, the latest entry is stored as the Redial
record and separate entries are stored for the
Dialed calls record.
z The Redial record can hold up to 30 phone
numbers for voice/videophone calls.
z The Dialed calls/Received calls record stores up to
30 voice/videophone call entries and 30 packet
communication or 64K data communication entries.
z If the maximum number of logs is exceeded, logs
are overwritten starting with the oldest one.
火曜日
N-04A_E.book
62 ページ
２００８年１２月１６日
z If you use 2in1, up to 30 records are stored for
Voice/Videophone Calls
each phone number. Also, when set to Dual
mode, up to 30 Redial/Dialed calls/Received calls
records for both phone numbers and total of the
60 records are displayed.

z If you make a call by selecting Multi number from
the function menu, the registered name and
number of the additional number are displayed
under the phone number in the Redial screen
(detail)/Dialed calls record screen (detail). If you
make a call without using the function menu,
nothing is displayed even when “Set Multi
Number” is set to additional number.

z When “Missed calls display” in the “Ring time
(sec.)” is set to “Not display” and you receive a call
of which ring tone sounded for shorter time than
the time set in the “Set mute seconds”, the call is
not displayed on the Received calls record.
z If the caller is using “Dial-in”, a number different
from the “Dial-in” number may be displayed.
z If the same phone number is registered in the
multiple phonebook entries with different names,
the name retrieved by the phonebook search in
the order of reading is displayed in the Received
calls record. → P.84
z When you have subscribed to Multi number and
make a call from the Received calls record
screen, the phone call is made from the number
which received the call regardless of the “Set multi
number” setting.
z When you receive a call for additional number of
Multi number, the registered name of the
additional number are displayed under the phone
number in the Received calls record screen
(detail).
Redial/Dialed calls/Received
calls screen (P.61)
Notify Caller ID*1 → P.64
Prefix numbers*1 → P.65
Chaku-moji*1 → P.63
Int’l call*1 → P.59
2in1/Multi Num. *1……When 2in1 is set to ON and
Dual mode, selects from “Number A, Number B,
Cancel number” (P.405) (not available when A mode
or B mode is set).
Selects from “Basic number, Additional number 1,
62
火曜日
午後８時２０分
Additional number 2, Cancel number” (P.401) at the
Multi Number when 2in1 set to OFF.
Ring time*2*3……Displays the missed call record
entries with the ringing times.
Add to phonebook → P.82
Look-up phonebook……“Accessing the phonebook
from the Redial or Dialed Calls record” → P.85
Add desktop icon → P.109
Compose message*4……Composes an i-mode mail
with the phone number pasted in recipient field.
Compose SMS*4……Composes an SMS with the
phone number pasted in recipient field.
Search location……Access the i-mode site and
execute imadoco kantan search using the phone
number.
Sent address*5*6, Received address*2……Displays
each list screen.
Select image……Selects the substitute image used
during a videophone call.
Big font ⇔ Standard font*3……Switches the
character size of the displayed name.
Delete……Selects the deleting method from “Delete
this, Delete selected, Delete all”.
*1: Available only for the detail screen.
*2: Available only for the Received calls screen.
*3: Available only for the list screen.
*4: Available only when 2in1 is in A mode or Dual mode,
and selecting the record screen for the A mode.
*5: Available only for the Redial/Dialed calls screen.
*6: Not available when 2in1 is in B mode.
z Selecting “Delete all” from the Redial/Dialed calls
record deletes all the Redial and Dialed calls
records.
z When 2in1 is set to ON, selecting “Delete all” on
the Redial/Dialed calls/Received calls screen
deletes all Redial/Dialed calls/Received calls
entries in A or B mode regardless of the 2in1
mode.

z Compose mail with a mail address specified as
the recipient when the mail address is stored in
the phonebook together with the phone number. If
multiple mail addresses are stored, the first
address is used.
N-04A_E.book
63 ページ
２００８年１２月１６日
Using Chaku-moji

Storing, editing and setting messages
i “SETTINGS/SERVICE”
1 “Service”
“Chaku-moji” Select
any item:
Create message……Stores or edits frequently
used Chaku-moji. You can store up to 30 Chakumoji (including 5 pre-installed).
Highlight an item to be stored or edited
o (Edit) Enter the Chaku-moji
■ To delete a message
u (FUNC) “Delete” Selects the deleting
method
午後８時２０分
Making a call with a message
You can add Chaku-moji when making a voice or
videophone call from the “Enter phone number
screen” and the detail screen of the “Phonebook” or
“Redial/Dialed calls/Received calls”.

phone number screen (P.54)
1 Enter
u (FUNC) “Chaku-moji”
Select any item:
Create message……Enters Chaku-moji. You
can enter up to 10 characters.
Select message……Selects from the stored
Chaku-moji.
You can edit Chaku-moji by pressing o (Edit)
on the message selection screen.
Sent messages……Selects from the previously
sent Chaku-moji. You can edit Chaku-moji by
pressing o (Edit) on the sent message screen.
■ To delete the entered Chaku-moji (to make
a call without Chaku-moji)
u (FUNC) “Chaku-moji” “Create
message” Clear all the entered Chaku-moji
2 r (voice call), o (V.phone)
MSG display settings……Set the Chaku-moji
display setting for an incoming call with Chakumoji from “Display all messages, Only number in
PH-book, Calls with Caller ID, Hide all
messages”.
3D message display……Sets whether to
display Chaku-moji in 3D animation.
z You cannot delete the pre-installed Chaku-moji.
Even when you change a pre-installed Chaku-moji
and delete the Chaku-moji, it is restored to the
default.
When the other party’s terminal receives Chaku-moji,
the result “Transmission completed” appears.
z Sending Chaku-moji is charged. Receiving
Chaku-moji is not charged.
z You can store up to 30 Chaku-moji in the sent
messages record (if you use 2in1, up to 30 sent
messages records when set to each mode, and
up to 30 sent messages records for each and total
of the 60 records are stored when set to Dual
mode). When you send same Chaku-moji
repeatedly, only the latest one is recorded. When
the entries exceed the maximum number, entries
are overwritten from the oldest entry.
Continued on next page
63
Voice/Videophone Calls
When making a voice call or videophone call, you can
send a message (Chaku-moji) to the other party to
show the summary of the call, etc. beforehand.
z 5 Chaku-moji messages are stored at the time of
purchase. You can change the pre-installed Chakumoji messages.
z You can include pictographs or face marks in
Chaku-moji, and you can send a message of up to
10 characters including pictograph/symbol/doublebyte character/single-byte character.
z For details on Chaku-moji and the compatible
models, refer to the DOCOMO website or “Mobile
Phone User’s Guide [Network Services]”.
火曜日
N-04A_E.book
64 ページ
２００８年１２月１６日
z If the receiver’s terminal is under conditions such
Voice/Videophone Calls
as followings, Chaku-moji cannot be sent. In this
case, no sending charges apply.
• The terminal is not compatible with Chaku-moji
(“Transmission failed” appears)
• Chaku-moji does not appear on the screen of
the receiver terminal because of the “MSG
display settings” on the receiver terminal
(“Transmission failed” appears)
• When Public mode (Driving mode) is set
• The ringing time for recording message is set to
0 second.
•“
” or the FOMA terminal is turned off.
z Depending on the signal status, sending result
does not appear on the sender terminal even
when the receiver terminal receives Chaku-moji.
In this case, sending charges apply.
z You cannot send or receive Chaku-moji when
using the FOMA terminal overseas.
● When you receive a voice or videophone
call with messages
The Chaku-moji appears on the ringing screen. The
Chaku-moji disappears when you answer the call.
z The received Chakumoji is displayed in 3D
animation.
Chakumoji
Ex. Voice call
z Even when you receive a call whose ring tone
sounded for shorter time than the time set in the
“Set mute seconds” of “Ring time(sec.)”, Chakumoji is displayed and recorded in the Received
calls record.
z Some pictographs are not displayed in 3D
animation.
z Depending on the status of the sender or receiver,
Chaku-moji may not be displayed even if you
receive a call with Chaku-moji.
z When the Original lock is set to “Chaku-moji”,
Chaku-moji is not displayed even if you receive a
call with Chaku-moji. You can view the Chaku-moji
in Received calls after releasing the lock.
火曜日
午後８時２０分
● Displaying message from the received
calls record
When you receive Chaku-moji, the “
” icon
appears on the Received calls record, and you can
check the Chaku-moji message on the “Received
calls screen (detail)”.
z Even when you make a call using the Received
calls record, the Chaku-moji in the record is not
sent.
Setting Notifying/Withholding
of Caller ID When Making a
Call
Adding the “186”/“184” prefix to the
other party’s phone number
To provide your caller ID, add the “186” prefix when
you dial the phone number. To withhold your caller ID,
use the “184” prefix.
■To provide your phone number
186-(The other party’s phone number) r (voice
call), o (V.phone)
■To withhold your phone number
184-(The other party’s phone number) r (voice
call), o (V.phone)
Selecting to Notify/Withhold your
caller ID from the function menu
Select Notify/Withhold your caller ID from the function
menu of the detail screen such as “Enter phone
number screen” and “Phonebook/Received calls/
Dialed calls/Redial”.

the phone number of the
1 Enter
other party
(FUNC) “Notify Caller ID”
2u
“OFF” or “ON”
■ To cancel “Notify Caller ID”
“Cancel prefix”
When “Cancel prefix” is selected, the “Caller ID
Notification” setting is applied.
3 r (voice call), o (V.phone)
64
N-04A_E.book
65 ページ
２００８年１２月１６日
Sending Push Signals
Quickly

i “SETTINGS/SERVICE”
1 “Dialing”
“Pause dial”
■ If there is dialing data already stored
The stored dialing data appears.
If you send the displayed dialing data as it is,
then go to Step 3.
■ To delete a dialing data
u (FUNC) “Delete”
(Edit) Enter the dialing data
2o
Press 0 to 9, q and w to enter the
dialing data.
■ To enter p (pause)
w (1 second or longer)
d (Send) Enter the dialing data
3 The FOMA terminal calls the entered phone
number and displays the dialing data up to the
first p (pause) while the dialed phone is ringing.
p (pause) is not displayed.
午後８時２０分
Using the Prefix Function
You can store the prefix numbers such as IDD prefix
code (WORLD CALL) and 186/184 for notifying/
withholding your caller ID beforehand and add these
prefix numbers when you make calls.
Storing the prefix numbers

z You can store up to 7 prefix numbers.
z You can enter numbers from 0 to 9 and the #, *
and + symbols.
i “SETTINGS/SERVICE”
1 “Dialing”
“Prefix setting”
■ To delete a prefix
u (FUNC) Selects the deleting method
the item to store or
2 Highlight
change o (Edit)
3 Enter the name to be stored
4 Enter the numbers (prefix)
Making a call with the prefix number

z You can add the prefix numbers from the “Enter
phone number screen” and the detail screens of
“Phonebook/Received calls/Dialed calls/Redial”
screens.

the phone number of the
1 Enter
4r
other party
Each time you press r, the dialing data up to
p (pause) is transmitted. Once the FOMA
terminal has finished sending the last number,
the in-call screen reappears.
u (FUNC) “Prefix numbers”
2 Select
the stored name r
■ To transmit all the dialing data at once
j (1 second or longer) “Send at one time”
It may not be possible to send all the data at
once to some recipients.
z Some phones may be unable to receive push
signals.
65
Voice/Videophone Calls
By sending push signals from the FOMA terminal,
you can use services such as ticket ordering and
bank balance requests.
You can store the dialing data used as push signals to
Pause dial beforehand and send it quickly. Inserting p
(pause) into the dialing data allows you to send data
with a separation where a pause lies.
z You can store only 1 dialing data.
z You can enter numbers from 0 to 9, the # and *
symbols, and p (pause) for dialing data.
z You cannot enter p (pause) in succession or at the
beginning of the dialing data.
火曜日
N-04A_E.book
66 ページ
２００８年１２月１６日
Setting Sub-addresses When
Making Calls 
You can set whether to specify “*” in the phone
number as a separator so that the numbers following
“*” are recognized as a sub-address (ON, OFF).
z Sub-addresses are used in ISDN to identify calls
made from specific communications devices and to
select content in “V-live”.
Voice/Videophone Calls
i “SETTINGS/SERVICE”
“Dialing” “Sub-address setting”
“ON” or “OFF”
z In the following cases, “*” does not function as a
sub-address separator. The entered number
including “*” is recognized as an ordinary phone
number:
• When the “*” is entered at the beginning of a
phone number
• When “*” immediately follows “186”/“184” at
the beginning of a phone number
• When “*” immediately follows a number
entered using “Prefix numbers”
• When the phone number contains “*590#/
*591#/*592#”
火曜日
午後８時２０分
Blocking Out Ambient Noise

This function suppresses ambient noise and makes it
easier for the other party in a voice or videophone call
to hear you.
i “SETTINGS/SERVICE”
1 “Talk”
“Noise reduction” “ON”
or “OFF”
Making Hands-free Calls in
the Car

You can make or receive voice calls with hands-free
compatible devices by connecting the FOMA terminal
to hands-free compatible devices such as the In-Car
Hands-Free Kit 01 (optional) or a car navigation
system.
For information on how to use the hands-free device,
refer to the manual provided with the device. The
FOMA In-Car Hands-Free Cable 01 (optional) is
required to use the In-Car Hands-Free Kit 01.
z To operate from the hands-free device, set the
USB mode to “Communication mode”.
z The display and ring tones used for incoming calls
Setting the Alarm Used for
Reconnection

When the signal quality deteriorates during a voice/
videophone call and the call drops out, the FOMA
terminal will automatically reconnect the call if the
signal quality quickly improves. Set the type of alarm
when a call is reconnected for this function.
z The interval for reconnection varies depending on
communication conditions or the signal quality. It
takes about 10 seconds.
i “SETTINGS/SERVICE”
1 “Talk”
“Reconnect signal”
Select an alarm tone
Select from “No tone, High tone, Low tone”.
z Call charges apply in the interval (up to about 10
seconds) for reconnection.
66
and mail are as specified in the FOMA terminal
settings.
z When the hands-free device is set to emit the
sound from the hands-free device, the ring tone
still sound through the hands-free device even
when the FOMA terminal is set to Manner mode
or the ring volume is set to “Silent”.
z When the Public mode (Driving mode) is set,
operation for incoming calls and messages is as
specified in the “Public mode (Driving mode)”
settings.
z When the Record message is set, operation for
incoming calls is as specified in the “Record
message” settings.
z When the hands-free device is set to emit the
sound from the FOMA terminal, operation when
the FOMA terminal is closed during a call is as
specified in “Setting when folded”. When the
hands-free device is set to emit sound from the
hands-free device, folding the FOMA terminal
does not affect the call status regardless of the
“Setting when folded” setting.
N-04A_E.book
67 ページ
２００８年１２月１６日
火曜日
午後８時２０分
■ To switch between the FOMA terminal and
Bluetooth device (P.375)
r (1 second or longer)
Receiving a Voice/
Videophone Call
3 To end the call, press y
z If the “Answer incoming” option on “Setting when
opened” (P.351) is set “ON”, the FOMA terminal is
turned on when it is opened, enabling you to
answer incoming calls.
z Note that you cannot make a call with the FOMA
terminal closed.
call is received
1 Voice/Videophone
The ring tone sounds and the illumination lamp
flashes.
■ When you receive a call with Chaku-moji
The Chaku-moji appears on the ringing screen,
videophone ringing screen. → P.64
Display while receiving a call
■When the other party’s phone number is
notified
The other party’s phone number appears on the
screen. When the caller is stored in the
phonebook, the name stored in the phonebook
appears. (With the “Security Code” being set
“YES”, only the name is displayed while the
Keypad lock is set.) → P.80
z If the same phone number is registered in the
multiple phonebook entries with different
names, the first name retrieved by the
phonebook search in the order of reading
appears. → P.84
z If the caller is stored as secret data, the name
or other information does not appear and only
the phone number appears.
z When you receive a call for additional number
of Multi number, the registered name of the
additional number is displayed on the ringing
screen.
Voice/Videophone Calls
* As N-07A is not equipped with the front camera,
during a videophone call, you can send only the
substitute image (Chara-den) or image from the
rear camera to the other party. You can change
the substitute image (Chara-den) to other data
such as an image of My picture in “Select image”.
→ P.75
■When the other party’s phone number is
not notified
Ringing screen/Videophone
ringing screen (P.67)
Ringing
Videophone ringing
Function menu P.67
Function menu P.67
■ To put a voice/videophone call on hold
while the FOMA terminal is ringing → P.70
2r
■ Operations during a videophone call
You can perform various operations such as
changing the camera image to the substitute
image, muting the sound. → P.54
■ To switch the setting of Hyper Clear Voice
→ P.60
■ When the other party switches a voice/
videophone call during a call → P.68
■ To put the current voice/videophone call
on hold → P.70
Call Rejection……Terminates the receiving call
without answering.
Call Forwarding……Forwards the call. The call is
forwarded regardless of the “Call Forwarding” setting
“Activate/Deactivate”.
Voice Mail……Connects the call to the voice mail
service center regardless of the “Voice Mail” setting
“Activate/Deactivate”.
Change Display……Switches the display from
additional number 1 or 2 to the number from which
the call is forwarded. This can be selected when
receiving multi number call (for additional number 1 or
2) and the call is forwarded at the same time.
z You can receive a call using an earphone/
microphone (optional). → P.369
Continued on next page
67
N-04A_E.book
68 ページ
２００８年１２月１６日
火曜日
午後８時２０分
z If you have subscribed to the Call waiting, Voice
Voice/Videophone Calls
mail or Call forwarding service, activate “Set incall arrival” and set “Incoming Call Mng” to
“Answer”, you will hear a short double-beep
(“bibip”) when you receive a call when you are
already on a call.
• If you subscribe to the Voice mail or Call
forwarding service, you can answer the call by
ending the current call.
• If you subscribe to the Call waiting service, you
can answer the voice call by putting the current
call on hold and you can answer the videophone
call by ending the current call.
z You can set the operation for calls from the caller
not stored in the phonebook. → P.131
z You can set the restriction for each phone number
stored in the phonebook. → P.129

z It may take a few seconds to switch from a camera
image to a substitute image (Chara-den)
depending on the Chara-den.
When the Other Party
Switches a Voice/Videophone
Call (Caller)
When you receive a voice/videophone call, the other
party can switch the call between voice call and
videophone call.
z The receiver cannot switch a voice call to a
videophone call.
z To switch the call, the receiver needs to set “Ntfy
switch-mode” to notify the switch beforehand.
→ P.75
z You can use this function with the terminals
compatible with voice call/videophone call switch.

In-call screen (P.54) The other
party switches to a videophone
call
While switching, the screen which indicates that
the calls are being switched appears and the
voice guidance is played.
When the voice call is switched to the
videophone call, the substitute image is sent to
the other party.
68
■ When the other party switched a
videophone call to a voice call
Videophone in-call screen (P.54) The other
party switches to a voice call
The videophone call is switched to the voice call.
Using the Dial Keys to
Answer a Call

You can use this setting to turn off the ring tone or
answer the phone quickly when you receive a call.
i “SETTINGS/SERVICE”
1 “Incoming
call” “Answer
setting” Select any item:
Any key answer……Valid for voice calls. You
can answer the call by pressing any of the
following keys.
r, d (Answer), 0 to 9, w, t, o,
p, b
* For videophone calls, you can answer the call only
by ordinary key operations (r or d (Subst.)).
Quick silent……Pressing any of the following
keys or opening the FOMA terminal stops the
ring tone while the caller continues to hear the
ring tone.
0 to 9, w, t, b, p or o (for voice
calls only)
To answer the call, press r or d (Answer/
Subst.).
OFF……You can answer the call only with the
ordinary key operations.
r, d (Answer/Subst.)
N-04A_E.book
69 ページ
２００８年１２月１６日
z Even when “Quick Silent” is ON, a call is initiated
Ending/Holding Calls with the
FOMA Terminal Closed

You can set how your FOMA terminal operates when
it is closed during a voice or videophone call.
i “SETTINGS/SERVICE”
1 “Slide-style
setting” “Setting
when folded” Select any item:
午後８時２０分
Adjusting the Earpiece
Volume

screen
1 Oncthe(1 standby
second or longer)
Adjust the volume with c
Pressing c (1 second or
longer) displays the earpiece
volume screen. If no
operation is conducted for 2
seconds or longer when the
earpiece volume screen is
displayed, the earpiece
volume screen is expired.
You can adjust the volume in 6 steps from “Level
1” (quietest) to “Level 6” (loudest).
■ To adjust the earpiece volume during a
call
z If you adjust the volume during a call, the adjusted
setting is retained after you end the call.
No tone……Mutes the sound. The other party
does not hear the hold tone.
Tone on……Puts a call on hold (holding). When
the FOMA terminal is closed, the other party
hears the hold tone. For videophone calls, the
image for holding is sent to the other party.
Speaker ON……The hold tone is sent to
the other party and also plays through the
speaker.
Speaker OFF……Only the other party
hears the hold tone.
End the call……Ends the call. It is the same
operation as pressing y .
z When Manner mode is set, no sound is played
through the speaker even if “Speaker ON” is set.
z When an earphone/microphone (optional) is
connected, this function is disabled.
z Even if the “Tone on” setting is selected, closing
the FOMA terminal activates the “No tone” setting
if “Call Waiting” is switched on.
Adjusting the Ring Volume

You can adjust the volume of the ring tone for a
incoming call, mail, chat mail, MessageR/F or
i-concier information in 6 steps for each type of call.
You can also set to silent or to gradually get louder.
z Restricting the speaker’s volume level when the
ring/alarm tone starts off → P.96
i “SETTINGS/SERVICE”
1 “Incoming
call” “Ring volume”
Select an item to adjust its
volume:
Select “Phone” to adjust the ring tone volume for
voice calls and 64K data communication.
Select “Mail” to adjust the ring tone volume for
i-mode mail, Area Mail, SMS or packet
communication.
c to adjust the ring
2 Use
volume d (Set)
■ To raise the volume gradually
Press f in “Level 6”
When set to “Step”, the ring volume becomes
louder and louder in every 3 seconds.
Continued on next page
69
Voice/Videophone Calls
when the FOMA terminal is opened if “Setting
when opened” option is set ON.
z Even when “Quick silent” is set, the “Any key
answer” function is used in Manner mode.
z Even when “Any key answer” and “Quick silent”
are set, if you press 5 (ON/OFF of ECO mode)
or 8 (ON/OFF of privacy angle) for 1 second or
longer, “Any key answer” or “Quick silent”
functions do not operate.
火曜日
N-04A_E.book
70 ページ
２００８年１２月１６日
■ To set to silent
Press g in “Level 1”
z The ring volume setting specified for “Phone” in
Voice/Videophone Calls
this function is also applied to the “Select ring
tone” setting for a voice call, the alarm tones for
“Schedule” and “To Do list”.
z The ring tone is played in low volume (e.g.,
immediately after a call), and then it gradually gets
louder and louder until it reaches the volume
specified in the “Ring volume”.
火曜日
午後８時２０分
Setting the hold tone

You can set the guidance messages to the other
party during the answer hold.
z You cannot change the hold tone that is played
during a call.
i “SETTINGS/SERVICE”
1 “Talk”
“Hold tone setting”
“On
hold tone” Select any item:
Select from “Tone 1, Tone 2, Voice announce 1*,
Voice announce 2*”.
*: Not available when no Voice announce is
recorded.
Holding the Ringing/Current
Call

Using the Public Mode

ringing y
1 While
The FOMA terminal makes
three rapid beeps and puts
the call on hold.
The caller hears a message
saying that you cannot
answer at the moment and
the call is held without
hanging up.
■ To put the current call on hold
During a call t
■ To end the call during answer hold/
holding
r to resume the call
2 Press
■ While current call on hold
r or t “YES”
z Call charges apply while putting the ringing call or
current call on hold.
70
The Public mode (Driving mode/Power OFF) is an
automatic answering service provided to keep
manner in public circumstances.
z When Public mode and network services are set
concurrently, Voice Mail service*1, Call Forwarding
service*1 and Caller ID Request service*2 take
precedence over Public mode.
*1: For a voice call whose ring time is not “0 second”, a
service activates after the Public mode
announcement is played.
*2: When the caller notifies the caller ID, Public mode
activates.
z Public mode does not work for a call from a phone
number registered for Nuisance Call Blocking.
Using the Public Mode (Driving Mode)

During Public mode, a caller hears a message that
you cannot answer the call because you are driving or
you are in the place you have to refrain from calling
(on the train or bus, in the theater, etc.), then the call
ends.
z Public mode can only be set/released from the
standby screen. (It can also be set/released when
the “
” icon is displayed.)
z You can still make calls when the FOMA terminal is
in Public mode.
z This function is not available during data
communication.
z When you receive a call of “User unset” while
Caller ID Request is set to “Activate”, caller ID
request message is announced. (The Public mode
message is not announced.)
N-04A_E.book
71 ページ
２００８年１２月１６日
the standby screen
1 Onw
(1 second or longer)
Public mode is set and “
”
appears.
When you receive a call, the
caller hears the message “I
cannot answer the call because I am driving or I
have to refrain from calling now. Please call back
later”.
z The Public mode setting takes priority when
“Record message” is “ON”.
z The Public mode setting takes priority when
Manner mode is set at the same time.
z If you make a voice call to an emergency number
(110, 119 or 118) while Public mode is set, Public
mode is released.
z The following tones do not sound in Public mode:
• Ring tone for voice/videophone call
• Ring tone for mail or message
• Alarm tone
• Wake-up tone
• Slide sound
• Charge sound
• Software tone for i-αppli
• Ring tone for packet communication/64k data
communication
午後８時２０分
z If the power is off or “
” is displayed, the
message for “
” is announced instead of the
Public mode message even when Public mode is
set.
Using the Public Mode (Power OFF)

During Public mode (Power OFF), a caller who made
a call while the FOMA terminal is turned off hears a
message that you cannot answer the call because
you are in the place you have to turn off the mobile
phone (in the hospital, on the airplane, around the
priority seat on the train, etc.), then the call ends.
the standby screen
1 Onw25251
Public mode (Power OFF) is set. (Nothing
changes on the standby screen.)
When you receive a call after setting Public
mode (Power OFF) and turning off the FOMA
terminal, the caller hears the message “The
person you are calling is in an area where cell
phone should not be used. Please call back
later.”
■ To cancel the Public mode (Power OFF)
On the standby screen w252
50 r
■ To check Public mode (Power OFF) setting
On the standby screen w252
59 r
● When Public mode (Driving mode) is set
● When Public mode (Power OFF) is set
The FOMA terminal does not ring when you receive a
voice or videophone call. Calls are logged in the
“Received calls” record as “Missed calls” record, and
the “Missed call” desktop icon appears on the
standby screen.
z A caller making a voice call hears a message that
you cannot answer the call because you are driving
or you are in the place you have to refrain from
using mobile phones, then the call ends.
z A caller making a videophone call sees the Public
mode video message on his or her display, then the
call ends.
z When you receive a mail, the ring tone does not
sound and the “New mail” desktop icon appears on
the standby screen.
The setting is valid until “*25250” is dialed to release
the Public mode (Power OFF). The setting is not
canceled only by turning on the FOMA terminal.
The Public mode (Power OFF) message is
announced even when you are in an out-of-service
area or where the reception is very poor.
z A caller making a voice call hears a message that
you cannot answer the call because you are in the
place you have to turn off the mobile phone, then
the call ends.
z A caller making a videophone call sees the Public
mode (Power OFF) video message on his or her
display, then the call ends.
71
Voice/Videophone Calls
■ To release the Public mode (Driving mode)
On the standby screen w (1 second or
longer)
Public mode is canceled and “
” disappears.
火曜日
N-04A_E.book
72 ページ
２００８年１２月１６日
火曜日
午後８時２０分
Voice/Videophone Calls
When You Cannot Answer a
Received Call

Having the Caller Leave a
Message

When you cannot answer a received call, the
appears on the standby screen. When you select
you can check the date, time and the caller ID about
the call.
z If you set the “Display missed call” option “ON” in
“Setting when opened” (P.351), you can check who
has made missed calls immediately after the
FOMA terminal is opened.
When you cannot answer a voice or videophone call,
this function allows you to record a message from the
caller on your FOMA terminal.
z The voice call can record 5 messages up to 20
seconds, and the videophone call can record 2
messages up to 20 seconds for each 1 case.
On the standby screen d
Select “
”
The Missed calls list screen appears.
Setting Record message
i “SETTINGS/SERVICE”
1 “Incoming
call” “Record
message” Select any item:
● Flashing of the Illumination lamp
When there is a missed call, new mail, new chat mail,
the illumination lamp keeps on flashing in its set color.
z Phone/Videophone: Color set for “Phone”
z New mail/Area Mail: Color set for “Mail”
z New chat mail: Color set for “Chat Mail”
■Flashing color and conditions
z The lamp does not flash when the Missed info of
“Illumination” is set to “OFF”.
z The lamp flashes in the default color when
Gradation is set in “Illumination”.
z You can set the specified color for the caller/sender
in the phonebook. → P.87
z The lamp does not flash in Public mode (Driving
mode).
■To turn off the lamp
z Selects the icon for “Missed call”, “New mail” or
“Chat mail” in the display or push t (1 second or
longer) to check the description.
72
ON……Select the desired type of answer
message from “Japanese 1/Japanese 2/English/
Voice announce 1*/Voice announce 2*”, then set
the record message.
OFF……Cancels the Record message setting.
*: Not available when no Voice announce is
recorded.
the ringing time (000 to 120
2 Enter
seconds in 3 digits)
The record message is set and “
appear on the standby screen.
” and “
”
z To give priority to “Record message” function
when “Voice Mail”, “Call Forwarding” and “Record
message” are set at the same time, set the ringing
time of Record message shorter than that of Voice
mail and Call forwarding.
z If the mute time set in “Ring time(sec.)” is longer
than the ringing time set for the Record message
function, the FOMA terminal switches directly to
Record message without ringing first. To have the
FOMA terminal ring before it records a message,
make sure that the ringing time for Record
message is longer than the mute time.
z You can use “Ring tone/Image” (for each
phonebook entry) to set an answer message for
each phone number and “Ring tone/Image” (for
the phonebook group) to set an answer message
for each group.
N-04A_E.book
73 ページ
２００８年１２月１６日
When you receive a call with “Record
message” set to “ON”
■ When message recording starts
z The recording screen appears. With the FOMA
terminal open, the caller’s voice can be heard
through the earpiece during message recording.
■ To answer a voice/
videophone call while
recording
午後８時２０分
Having Callers Leave a
Message during an Incoming
Call

Even when the “Record message” function is not set
to “ON”, you can record messages while receiving a
call by pressing a key.
ringing n
1 While
The recording of the message starts.
■ To set the FOMA terminal to Manner mode
at the same time recording is started
While ringing q
z You cannot set “Record message” to “ON” with
this operation.
z When you receive a voice or videophone call
when the messages are full, the record message
is not activated and the FOMA terminal keeps on
ringing (when q is pressed, the ringing
continues at the setting of “Manner mode set”).
Ex. Voice call
■ When message recording ends
z The original screen reappears
and the “Missed call” desktop
icon and “Record message”
desktop icon appear on the
standby screen. You can check
the contents by selecting the
one of the desktop icons. → P.73
z Number of recordings are
displayed with icons on the icon
display area at the top of the screen.
to
: Recorded voice messages (the
number indicates the number of messages)
: Recorded videophone messages (the
number indicates the number of messages)
* When Auto voice memo is set to ON, the following
icons appear but the number of messages does not:
: Recorded voice message
: Both Record message and Auto voice memo
z You cannot answer another call while recording a
message.
z When the Manner mode is set, you cannot hear
the caller’s voice during a message recording.
Playing/Erasing Recorded
Messages and Voice Memos
You can play/erase Recorded Messages, Recorded
Video Messages, Voice Memos and Auto voice
memo.
z When there is a recorded message which has not
been played, “
” (for a recorded message) or
“
” (for a recorded video message) appears on
the standby screen.

On the standby screen d
1 Select
“ ” (for a recorded
message) or “ ” (for a recorded
video message)
“★” appears for the recorded
item.
■ To play a message with
a menu operation
i “LIFEKIT” “Play/
Erase msg.” (voice) or “Play/
Erase VP msg.”
Play/Erase msg.
Continued on next page
73
Voice/Videophone Calls
The record message activates when the set time is
elapsed.
z To the caller of a voice call, the answer message is
played and the recording starts.
z To the caller of a videophone call, the “Preparing”
image is sent and the answer message is played,
then the “Recording” image is sent and the
recording starts.
火曜日
N-04A_E.book
74 ページ
２００８年１２月１６日
■ To erase Recorded Messages or Voice
Memos
u (FUNC) Selects the erasing method
■ To paste a function as a desktop icon
u (FUNC) “Add desktop icon”
2 Select the item to play
Voice/Videophone Calls

The FOMA terminal beeps and playback
begins. When the playback ends, the FOMA
terminal gives 2 short beeps and the “Play/
Erase msg. screen” reappears.
■ To play the next message while playing
a message
Yn
Each time you press Yn, the messages are
played from the newest one in the order of
Record message → Voice memo → Auto
voice memo.
■ To stop the playback
Xd (Stop) or Wt
The “Play/Erase msg. screen” reappears.

The playback starts. When the playback ends,
the “Play/Erase VP msg. screen” reappears.
■ To play another message while playing a
message
Xv
■ To adjust volume while playing a
message
Xc
■ To switch ON/OFF of the speaker while
playing a message
Xu (FUNC) “Speaker ON” or “Speaker
OFF”
■ To pause the playback
Xd (Stop)
To resume playback, press Xd (Play).
■ To stop the playback
Wt
The “Play/Erase VP msg. screen” reappears.
■ To make a voice/videophone call to the
phone number displayed while playing a
message
r (voice call), o (V.phone)
■ To erase the playing message
u (FUNC) “Erase” “YES”
74
火曜日
午後８時２０分
z When 2in1 is in A mode or B mode, “ ★ ” does not
appear for the recorded message recorded in the
unused phone number. When set to “Dual mode”,
“ ★ ” appears for the recorded message recorded
in the both phone numbers.
Using Chara-den
This function sends a cartoon character instead of
your own image when you make a videophone call.
Chara-den → P.313
z You can display your favorite Chara-den if you set
“Substitute image” of “Select image” to “Chara-den”
beforehand.
You can also use Chara-den by setting Chara-den
in the phonebook or Ring tone/Image function.
sending substitute image
1 While
(Chara-den) during a videophone
call Control your Chara-den by
pressing the dial keys
Pressing a dial key makes
the character perform the
action assigned to that key.
“Displaying/Using Charaden characters” → P.313
Chara-den
N-04A_E.book
75 ページ
２００８年１２月１６日
Setting Functions for the
Videophone
i “SETTINGS/SERVICE”
“Videophone”
火曜日
午後８時２０分
Setting the image sent during

videophone calls
z You can set a JPEG image whose file size is 100K
bytes or less and not larger than 854 dots wide ×
854 dots high, or a GIF image whose file size is
100K bytes or less and not larger than 854 dots
wide × 480 dots high or 480 dots wide × 854 dots
high (except for the files with restrictions).
item:
Videophone settings
2 Select any item:
Visual preference……Selects the image quality
of videophone calls from “Normal, Prefer img
qual, Prefer motion spd”.
Select image → P.75
Auto redial as voice……Sets whether to switch
to a voice call when a videophone call cannot be
made (ON, OFF).
Display setting
Main display……Selects the image
displayed on the main display from “Other
side, My side”.
Ntfy switch-mode → P.75
Hands-free switch……Sets whether to switch
to Hands-free automatically when starting a
videophone call (ON, OFF).
V-phone while packet→ P.76
On hold, Holding (When holding a call),
Substitute image, Record message (When
activating Record message), Preparing (When
sending the answer message), Voice memo
(When activating Voice memo)
2 Select the image to be sent:
Pre-installed……Sends only a message.
Original……Sends an image and a message.
Chara-den*……Sends the image selected in
“Substitute image” (P.314).
Priority order for Chara-den setting→ P.82
*: Available only when “Substitute image” is
selected.
■ To change from original to Chara-den
u (FUNC) “Change setting”
Setting for Switching between Voice
Call and Videophone Call

You can set whether to notify the other party that your
FOMA terminal supports the switch between a voice
call and a videophone call.
z The other party cannot switch the call when set to
“Indication OFF”.
z You cannot set this function during a call or while
“
” appears.
settings screen (P.75)
1 Videophone
“Ntfy switch-mode” Select any
item:
Indication ON, Indication OFF, Check
Indication
75
Voice/Videophone Calls
settings screen (P.75)
1 Videophone
“Select image” Select any
N-04A_E.book
76 ページ
２００８年１２月１６日
Setting the answer mode when you
receive a videophone call during

i-mode
z As the multi access function cannot be used for
videophone, incoming videophone calls during
i-mode communication or while sending or
receiving mails are handled according to this
setting.→ P.445
Voice/Videophone Calls
settings screen (P.75)
1 Videophone
“V-phone while packet” Select
any item:
V-phone priority……Switches to the
videophone ringing screen. When you answer
the incoming videophone, i-mode
communication is disconnected.
Packet downld priority……Rejects the
incoming videophone call.
V-phone answerphone……If you have
subscribed to the “Voice Mail Service”, the
videophone call is connected to the Voice Mail
service center regardless of “Activate,
Deactivate” setting of Voice Mail. When you
have not subscribed to this service, “Packet
downld priority” is activated.
Call forwarding……If you have subscribed to
the Call Forwarding Service, the videophone call
is forwarded regardless of “Activate, Deactivate”
setting of “Call Forwarding”. When you have not
set a forwarding number or subscribed to this
service, “Packet downld priority” is activated.

z If the signal quality deteriorates during a
videophone call, the image may become grainy or
patchy regardless of the settings in “Visual
preference”.

z If you delete the original still image, the “preinstalled” image is displayed (sent).
z When the Chara-den character set as the
substitute image is deleted and the “Chara-den”
substitute image cannot be displayed, the preinstalled “ ビーンズ (Beans)” is sent. If you delete
the pre-installed “ ビーンズ (Beans)”, the “Preinstalled” substitute still image is sent.
76
火曜日
午後８時２０分

z When a videophone call is switched and redialed
as a voice call, the call is charged as a voice call
and digital communication charges are not
applied.
z When a call is redialed, only the voice call records
are logged in the “Redial/Dialed calls” record.
z Even if “Auto redial as voice” is set to “ON”, it may
not be possible to redial due to the conditions of
the network or the other party, such as busy.

z The FOMA terminal does not switch to hands-free
mode automatically in the following cases even
when “Hands-free switch” is set to “ON”:
• While Manner mode is set
• When an earphone/microphone (optional) is
connected (however, the microphone operation
follows the “Headset mic. setting”).
• When holding a call or Record message is
activated for the incoming call
z Regardless of this setting, if the other party
switches a voice call to a videophone call, the
FOMA terminal keeps defaulting to the hands-free
setting (P.60) that has been previously selected for
a voice call before switching to a videophone call.

z Even when set to “V-phone priority”, you cannot
answer the videophone call if you are using multi
access such as using the i-mode communication
during a voice call.
z When set to “Packet downld priority”, “V-phone
answerphone” or “Call forwarding”, the received
videophone calls are recorded as “Missed calls” in
the “Received calls”.
z Even when set to “V-phone priority” or “Packet
downld priority”, “Voice Mail” or “Call Forwarding”
service is activated if the ring time for the “Voice
Mail” or “Call Forwarding” service is set to 0
second.
N-04A_E.book
77 ページ
２００８年１２月１６日
火曜日
午後８時２０分
Using the Videophone
Connecting to External
Devices
Voice/Videophone Calls
You can make or receive videophone calls from
external devices such as the PC by connecting to the
FOMA terminal with the FOMA USB Cable with
Charge Function 02 (Optional).
To use this function, you have to install a videophone
application on the dedicated external device or PC
and prepare commercially available devices such as
an earphone/microphone and USB compatible Web
camera.
z Set the USB mode setting to “Communication
mode”. There is no specific setting for connecting
external devices.
z For details on the operational environment,
settings, operations of the videophone application,
refer to the manuals supplied with the external
terminals.
z “ ドコモテレビ電話ソフト (DOCOMO Videophone
Software)” (only in Japanese) is available as the
application which is compatible with this function.
You can download the Software from the website of
DOCOMO Videophone Software (only in
Japanese).
(For details of the PC operating environment, etc.,
refer to the support website.)
http://videophonesoft.nttdocomo.co.jp/
(Only in Japanese)
z You cannot make a videophone call from the
external device during a voice call.
z When you have subscribed to either of the Call
Waiting service, Voice Mail Service or Call
Forwarding and you receive a videophone call
from an external device during a voice call, you
can answer the call after ending the current call.
When you receive a voice call, videophone call or
64K data communication during a videophone call
from the external device, you can answer these
calls in the same way.
77

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2009:03:31 14:59:09-04:00
Create Date                     : 2009:02:18 17:14:21+09:00
Metadata Date                   : 2009:03:31 14:59:09-04:00
Creator Tool                    : FrameMaker 7.1
Format                          : application/pdf
Document ID                     : uuid:96e5cc14-baff-44cf-a77a-2aa1b492c374
Instance ID                     : uuid:62d68fc2-8d46-403f-a15d-06bef369f38d
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Has XFA                         : No
Page Count                      : 25
Creator                         : FrameMaker 7.1

EXIF Metadata provided by EXIF.tools