NEC of America 7N2P14 PCS GSM Phone with RFID User Manual

NEC Corporation of America PCS GSM Phone with RFID

a href="https://usermanual.wiki/NEC-of-America" itemprop="url"> NEC of America >

Contents

Users Manual

1Making/Receiving CallsMaking a Voice/Videophone Call1Dial the other party’s number, starting with the area codeThe “Phone number entry” screen appears.Always start with the area code, even for calls within the same area. A number of up to 80 digits can be entered for making a call although the numbers disappear from the display one by one from the beginning after the number exceeds 26 digits.2rThe phone number disappears briefly and then reappears from the right as it is dialed. The “ ” icon flashes during dialing and remains lit during a call.The “FOMA voice in-call” screen appears.■To switch to a videophone call during a voice call"Changing a call from voice to videophone"■If you hear the busy toneThe line is busy. Press y, and call again after a while. ■If you hear the message saying that the other party cannot be reachedThe other party's mobile phone or PHS phone is not switched on or is out of signal range. Press y , and call again after a while. ■If you hear the message requesting your caller IDThe other party has set the Caller ID Request service to "Activate". Call again with your caller ID shown. ■If you set "2in1 setting" to "Dual mode"The outgoing number selection screen appears. Select a phone number. 3To end the call, press ydMaking a videophone call1Phone number entry screen Xo ()The "Videophone in-call" screen appears. You can talk hearing the other party's voice through the speaker. "Switching to Hands-free Operation"The " " icon flashes during dialing and remains lit during a videophone call. ■To switch to a voice call during a videophone call"Changing a call from videophone to voice"→p.3■To switch between camera image and substitute image during a videophone callXSelect "Substitute image" or "My side" from the function menu. ■To mute voice to send during a videophone call (microphone mute)Xa (1 second or longer)" " appears while in mute. Video is transmitted as it is. To cancel mute, press a again for 1 second or longer. 2To end the call, press y−−Area code Local code Phone numberＶ ｐｈｏｎｅ．
2Making/Receiving CallsdIf you entered a wrong phone number■To insert a numberPress h or j to move highlight to the number on the left of the insert position and enter the number. ■To delete a numberPress h or j to move highlight to the number to delete and press t. Pressing t for 1 second or longer deletes the highlighted number and all numbers on the left side of the highlighted number. ■To reenter a numberMove highlight to the beginning or end of the number and press t for 1 second or longer to return to the standby screen. dIf a videophone call is not connectedIf a videophone call is not connected, a message giving the reason for the connection failure appears. However, in some circumstances, an explanatory message may not be displayed. Also, depending on the type of phone used by the other party and the possible lack of a network service subscription, the reason given may not accurately reflect the other party's actual status. *: This message may also appear during packet communication depending on the type of other party's terminal. Message ReasonCheck number then redial The dialed phone number is currently not used. Busy*The line is busy. Busy with packet transmission Packet communication is in progress on the other party. Out of service area/power off The other party's phone is out of service or the power is turned off. Set caller ID to ONThe call is connected without showing your caller ID (when dialing visualnet). Your call is being forwarded The call is being forwarded (into a videophone call if the forwarding party has a videophone that complies with 3G-324M). Redial using voice call The forwarded party is non-videophone-terminal.Please activate caller ID before dialing again The Caller ID Request service is set on the other party.At the user's request, your call can not be connected The Nuisance Call Blocking service is set on the other party. Upper limit has been exceeded Connection failed The upper limit set for a Limit billing plan (Type Limit and Family Wide limit) is exceeded. Connection failed Set "Caller ID Notification" to "ON" and then try again. aThis message may also be displayed in other situations. Please make your call from the i-mode web page You attempted to make a videophone call to watch V-live without browsing the i-mode official site.
Download:
Mirror Download [FCC.gov]
Document ID933423
Application IDAC1Sv7MS4YW9cKSpNWDtYw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize20.57kB (257157 bits)
Date Submitted2008-04-25 00:00:00
Date Available2008-10-22 00:00:00
Creation Date2006-11-17 09:33:01
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2008-04-25 13:01:46
Document Title　
Document CreatorFrameMaker 7.1
Document Author: 　
FCC ID Filing: A98-7N2P14

Navigation menu