NIDEC MOBILITY GFM-H001 WIRELESS CHARGER User Manual manual FCC verC

Download:
Mirror Download [FCC.gov]
Document ID	2670481
Application ID	RM4RYA8mz7iKNxptWqziFg==
Document Description	(Short-Term Confidential) User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.3kB (1316309 bits)
Date Submitted	2015-07-07 00:00:00
Date Available	2016-01-26 00:00:00
Creation Date	2015-06-15 10:28:41
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2015-06-15 10:28:41
Document Title	manual_FCC_verC.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	902PP4773

Special Messages
- We provide many important saiety messages in this manual. For your safety and safety of others, pay
special attention to all warnings preceded by this alert symbol A
Failure to follow the warnings contained in this manual can result in serious iniury or accident.
A DANGER You WILL be KILLED or SERIOUSLY HURT It you don’t follow Instructlons.
A WARNING You CAN be KILLED or SERIOUSLY HURT it you don‘t follow instmc‘lions.
A CAUTION You CAN be HURT if you don’t follow instructions.
- As you read this manual, you may find information that is preceded by a NOTICE symbol.
This information is intended to help you avoid damage to your vehicle. other property. or the environment
on raw Emma
A WARNING
When charging a smertphene or other devices supported by the charger, do not handle or
vlew the device while driving. Doing so will Interfere with driving, which could result In a
crash.
Do not place any supported devices or products on the charger It Its surface area Is larger
than the top surtace of the charger or it there is the possibility that It may tell on (roll olt,
topple over, etc.) the charger.
Should a supported device or product fall off the wireless charger while driving, do not pick
it up while the vehicle is still moving. Doing so will intertere with drivnng, which could result
in a crash. Instead, park the vehicle in a sate location, and then pick it up.
A CAUTION
Metal objects between the charger and d to be charged I get hot and can burn you.
Remove toreign obiects from the charger before ch ng dev
a u mgr". Reserved
NOTICE
Do not attach a metal object to the charger. ® ®
Do not charge when the charger la covered
with a towel, layer at duet, etc.
- Do not allow the charger to get wet from
water, beverages, etc.
- Do not wipe the charger with oils, alcohol,
benzine, thinners, etc. or expose it to hair
sprays, insecticide sprays. etc.
0 Do not use the charger If it Is
maltunctioning. In the unlikely event that
the charger emits smoke, abnormal odors,
or unusual sounds, stop use immediately.
OILS, ALoonoL,
BEHZIIIE. THINNEHS. ac
etc.
can mm W
NOTICE
- Do not subject the charger to strong lorces or impact. Doing so may cause |n|ury and/or
malfunction.
- Do not place magnetic recording media Inside the charging area during charging. The
magnetism generated may erase the data on credit cards, ETC (electronic toll collection)
cards, etc. It may also cause mismatches and other precision Instruments to mallunctlon.
- Do not leave the mobile phone in the vehicle. In hot weather, the inside ol the vehicle could
reach extreamely high temperatures, which may cause this device to malfunction.
- The charger consumes a large amount of power. Do not use the charger ior extended
periods of time while the engine is stopped. The capacity of the vehicle’s 12V battery may
drop, possibly effecting the ability otthe engine to start.
a All mm. Resolved
How to Operate the Charger
The charger can be used with the ignition switch in the ACCESSORY mode or the ON mode.
Center the supported device on the [(15] mark in the charging area of the diarger to begin charging.
Part names
CHARGING AREA
052m“:
POWER
SWITCH
INDICATOR INDICATOR CAI-ITIONLABEL
(GREEN) (AMBER)
- The iii-ecunn in which the charger I: mounted
nmi ine orientation oi ine ai mark and power
lllli‘k my differ depending on ine model.
on aim: Hanna
W —e—
How to Operate the Charger
Operation
- When the ignition switch is set to the ACCESSORY mode or the ON mode, the charger is on when the
green indicator is lit.
- Charging starts when a mobile phone is placed in the charging area with the charger in the ON mode.
Position the supported device so that its charging surface is facing down. The amber indicator comes on
during charging.
a INFORMATION
This wireless charger can be used with any smartphones, cellphones. or other supported devices that
complies with the Qi wireless power interface standard.
“Di“ and the [q'i] mark are trademarks of the Wireless Power Consortium (WPC).
When charging is completed. the green indicator comes on. With a mobile phone, the amber indicator
may remain on even aiter charging has been completed.
When tully charging a mobile phone. charging will pause temporarily and then resume again
automatically after 15 minutes or so.
In order to ensure that the keyless access system will not be adversely affected, charging may pause
temporarily at such times as when all the doors and the think have been closed, but it will then resume
automatically. This is normal and not a malfunction.
During charging and immediately after charging. the charger and mobile phone will be warm. This is
normal and not a malfunction. If there is an unusual heating. check the charger and mobile phone.
Only one mobile phone can be charged at a time even when more than one device has been placed in
the charging area. Do not put plural mobile phone on top of the charger.
anagram,
How to Operate the Charger
NOTICE
- The functions of the charger cannot be used with a mobile phone whose shape or size will not allow the
charging surlace ot the supported device to be grounded in the charging area. In addition, some mobile
phones may not operate properly.
- Do not attach an anti-slip met or stickers to the charger. The presence of an anti—slip mat or stickers
between the mobile phone and the charger may prevent the charger from charging.
- It a cover or decorative accessory that does not comply with the Oi wireless power standard has been
attached to the supported device, it may not be possible for the device to be charged depending on
the material, thickness, etc. oi the cover or accessory. In such cases, remove the attached cover or
accessory.
- If charging does not start even after the supported device has been placed in the charging area, place
the device near the [db] mark in the center of the charging area.
- It may not be possible to charge a supported device under the following conditions:
- The mobile phone is already tully charged.
0 The mobile phone has become very hot as a result of charging.
- The vehicle is in a location where strong radio waves or noise is being generated, such
as TV towers, electric power plants or gas stations.
- It the charger becomes dirty, wipe off the dirt using a clean damp cloth.
- Before proceeding with charging, read the instructions provided with the mobile phone as well.
on em. Rea-Nod
How to Operate the Charger
How to usethe power switch
Power Switch Operation Specification
Press and hold (for approx. 1 second) The power is switched from ON to OFF or vice versa.
Press once The charging frequency is changed (')r
’: Radio noise can be reduced by changing the charging frequenw:
Press the charger power switch once. Then wait for the amber indicator to flash three times, then
check the radio reception.
0 All mm: W
How to Operate the Charger
Indicator status
During normal operation
Indicator
Off The charging function is OFF.
The charger is standing by.
Green Light 0N
Charging is completed (").
Amber Light 0N Charging is underway.
Amber Light Flashes
Three Tlmes The charglng lrequency Is changlng.
Vtfith some mobile phones, the amber indicator may remain on even after charging has been
completed.
on Right: Emma
How to Operate the Charger
When a mobile phone cannot be charged
First try the steps below. If the mobile phone still cannot be charged, then contact your dealer.
Corrective Action
There is a foreign obiect or objects Flemove the foreign object or objects
between the mobile phone and between the mobile phone and the
Hashing charging area. charging area,
simultaneously The mobile phone has shifted from Place the mobile phone near the Oi
the position where it was originally mark in the center of the charging
placed. area.
Hashing The charger has mallunctioned. Contact your dealer.
on RM: Ruched
Product Specifications
Standard Oi (Wireless Power Consortium)
Rated Voltage 12V
Operating Temperature Range -4"F to 149"F (-20“C to 65"C)
Power Suppl 1 unit; charging power: 5W (max)
This product is designed to comply with the Qi (Wireless Power consortium) standard, but no guarantees
are given for its compatibility with all products that comply with the standard.
on law Emma
FCC statement
This product complies with the appropriate requirements or the required standards of FCC (Federal
Communication Commission), described below:
This device complies with Part 18 of the FCC rules.
This equipment generates, users, and can radiate radio frequency energy and, if not installed and
used per the instructions, may cause harmful interference to radio communications.
In order to use safely:
- Remove any metal obiects from the charge pad before charging a device.
- Do not open the charger case.
- Do not use the charger if it malfunctions. Contact your dealer.
If the charger interferes with radio communications, attempt to correct the interference:
. Press the switch on the charger once to change the charging frequency band.
. Press and hold the switch on the charger for a few seconds to turn off the charger.
Users with a pacemaker (Implantable heart pacemaker or Implantable blventrlcular pacing pulse
generator without defibrillator functions) 0 ' plantable cardioverter-defibrillamr (ICD) must ensure
that the part of their bodies where the devi is implanted is kept at least 22 cm (8.67 in.) away
from the wireless charger during charging. Charging may atfect the operation of the pacemaker or
ten. Prior to use, consult with a physician or with the manutacturer of the medical device about Ihe
possible effects.
cummm.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 902PP4773
Create Date                     : 2015:06:15 10:28:41+09:00
Modify Date                     : 2015:06:15 10:28:41+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Format                          : application/pdf
Title                           : manual_FCC_verC.pdf
Creator                         : 902PP4773
Document ID                     : uuid:876ee47d-a035-4ad0-97d2-8b2be0bd9f7d
Instance ID                     : uuid:e83c51f8-a062-4282-9317-96d17a46aa03
Page Count                      : 12

EXIF Metadata provided by EXIF.tools