Neptune Technology Group R900M R900M Modular RF Circuit Board User Manual 13 0317 Exhibit Cover
Neptune Technology Group Inc. R900M Modular RF Circuit Board 13 0317 Exhibit Cover
Contents
- 1. Manual
- 2. User Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2052370 |
| Application ID | 53iL5sPfXyteeV2KCOt9xQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 9.48kB (118461 bits) |
| Date Submitted | 2013-08-23 00:00:00 |
| Date Available | 2013-08-23 00:00:00 |
| Creation Date | 2013-08-20 13:59:04 |
| Producing Software | ScanSoft PDF Create! 7 |
| Document Lastmod | 2013-08-20 13:59:05 |
| Document Title | Microsoft Word - 13-0317 - Exhibit Cover.doc |
| Document Creator | Microsoft Word - 13-0317 - Exhibit Cover.doc |
| Document Author: | courtney.mcgann |
Certification Exhibit FCC ID: P2SR900M IC: 4171B-R900M FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Project Number: 13-0317 Manufacturer: Neptune Technology Group Inc. Model: R900M Manual 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Manual information for products utilizing the R900M All products containing the R900M modular RF circuit board will have the following information included in the product manual. FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this device not expressly approved by Neptune Technology Group In could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help.” RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Professional Installation In accordance with section 15.203 of the FCC rules and regulations, the MIU must be professionally installed by trained utility meter installers. 1600 Alabama Highway 229, Tallassee AL 36078 (334)293-6555 Industry Canada The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Under Industry Canada regulations, this radio transmitter (4171B-R900M) may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This radio transmitter (4171B-R900M) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (4171B-R900M) a été approuvé par Industrie Canada pourfonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximalet l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Manufacture Neptune Technology Group Neptune Technology Group Model Number 12527-xxx 12641-002 12641-003 Maximum Gain Impedance 0dBi 2.1dBi 2.1dBi 75 ohm 50ohm 50ohm This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 1600 Alabama Highway 229, Tallassee AL 36078 (334)293-6555
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 3 XMP Toolkit : 3.1-701 Producer : ScanSoft PDF Create! 7 Creator Tool : Microsoft Word - 13-0317 - Exhibit Cover.doc Create Date : 2013:08:20 13:59:04-04:00 Modify Date : 2013:08:20 13:59:05-04:00 Title : Microsoft Word - 13-0317 - Exhibit Cover.doc Creator : courtney.mcgann Author : courtney.mcgannEXIF Metadata provided by EXIF.tools