Netgear orporated 16100335 AC 1200 WiFi Range Extender User Manual AC1200 WiFi Range Extender Model EX6200

Download:
Mirror Download [FCC.gov]
Document ID	3036963
Application ID	SF+45/EkMzz1kgZdpAKERQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	235.5kB (2943721 bits)
Date Submitted	2016-06-22 00:00:00
Date Available	2016-12-20 00:00:00
Creation Date	2016-03-14 14:40:28
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-03-14 14:43:10
Document Title	AC1200 WiFi Range Extender Model EX6200
Document Creator	FrameMaker 10.0.2
Document Author:	NETGEAR

AC1200 WiFi Range Extender
Model E X6200
User Manual
March 2016
202-11298-06
350 East Plumeria Drive
San Jose, CA 95134
USA
AC1200 WiFi Range Extender
Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and use it to register your product at
https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR
recommends registering your product through the NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR.
Phone (Other Countries): Check the list of phone numbers at http://support.netgear.com/general/contact/default.aspx.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
See the regulatory compliance document before connecting the power supply.
Trademarks
© NETGEAR, Inc. NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are
used for reference purposes only.
Table of Contents
Chapter 1
Overview
Unpack Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Top Panel LEDs and Front Panel USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel Ports, Buttons, Antennas, and Connector . . . . . . . . . . . . . . . . . . . . . . 9
Attach the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Attach the Rubber Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Retrieve and Display the Product Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
When to Use Your Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How the Extender Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Support for the 801.11ac Networking Standard. . . . . . . . . . . . . . . . . . . . . . . . . 14
Chapter 2
Get Started
Use the Extender in Extender Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set Up the Extender Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect to an Existing WiFi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect Ethernet-Enabled Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Use the Extender in Access Point Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Access Extender Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Run Smart Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 3
16
16
16
20
21
23
23
Optimize Extender Performance
Boost Your Video Streaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjust the WiFi Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Chapter 4
Extender Network Settings
View Connected Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
View WiFi Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Change the WiFi Network Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turn Off the SSID Broadcast to Create a Hidden Network . . . . . . . . . . . . . . . . .
Disable or Enable the WiFi Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Change the WiFi Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Use WPS to Add a Computer to the Extender’s WiFi Network. . . . . . . . . . . . . .
Use WPS with the Push Button Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Use WPS with the PIN Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deny Access to a Computer or WiFi Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set Up an Access Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Change the Extender’s Device Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set Up the Extender to Use a Static IP Address . . . . . . . . . . . . . . . . . . . . . . . . . .
29
29
30
31
32
33
34
35
35
36
37
38
39
AC1200 WiFi Range Extender
Use the Extender with MAC Filtering or Access Control . . . . . . . . . . . . . . . . . . . 40
Chapter 5 Maintain and Monitor the Extender
Change the Extender User Name and Password. . . . . . . . . . . . . . . . . . . . . . . . . .
Turn Password Protection Off and On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recover a Forgotten User Name or Password. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automatically Adjust for Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . .
Manually Set the Extender Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back Up and Manage the Extender Configuration . . . . . . . . . . . . . . . . . . . . . . . .
Back Up the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restore the Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Return the Extender to Its Factory Default Settings . . . . . . . . . . . . . . . . . . . . . .
Update the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turn the NETGEAR Logo LED On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restart the Extender Remotely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43
44
44
45
45
46
46
47
48
50
51
51
Chapter 6 Share a USB Storage Device
USB Storage Device Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Share Files Across Your WiFi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Access a USB Storage Device Attached to the Extender. . . . . . . . . . . . . . . . . . .
Turn the USB Port Off and On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Add a Network Folder on a USB Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Password-Protect a Folder on a USB Storage Device . . . . . . . . . . . . . . . . . . . . .
Use the Extender USB Port to Share a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . .
53
53
54
55
56
57
57
Chapter 7 Use the Extender as a Media Server
Specify ReadyDLNA Media Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Play Media from a USB Drive on TiVo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Chapter 8 Share a USB Printer
Install the Printer Driver and Cable the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . .
Download the ReadySHARE Printer Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Install the ReadySHARE Printer Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Use the Shared Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
View or Change the Status of a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Use the Scan Feature of a Multifunction USB Printer . . . . . . . . . . . . . . . . . . . . .
Change NETGEAR USB Control Center Settings . . . . . . . . . . . . . . . . . . . . . . . . . .
65
65
66
67
68
69
70
Chapter 9 FAQs and Troubleshooting
FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Cannot Connect to the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Cannot Join a WiFi Network and Receive an Error Message . . . . . . . . . . . . . . . . 73
AC1200 WiFi Range Extender
Appendix A
Factory Settings and Technical Specifications
Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Technical and Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
1.
Overview
Your extender boosts your existing network range and speed, delivering dual-band WiFi. The
extender combines excellent range with maximum WiFi performance.You can also use the
extender in access point mode as a WiFi access point and create a new WiFi hotspot by using a
wired Ethernet connection.
This chapter covers the following topics:
•
Unpack Your Extender
•
Top Panel LEDs and Front Panel USB Port
•
Rear Panel Ports, Buttons, Antennas, and Connector
•
Attach the Stand
•
Attach the Rubber Feet
•
When to Use Your Extender
•
How the Extender Works
•
Support for the 801.11ac Networking Standard
Note: For more information about the topics covered in this manual, visit the
support website at support.netgear.com.
Note: Firmware updates with new features and bug fixes are made
available from time to time on downloadcenter.netgear.com. Some
products can regularly check the site and download new firmware, or
you can check for and download new firmware manually.
AC1200 WiFi Range Extender
Unpack Your Extender
Your box contains the following items.
Snap-on stand
Four rubber feet
Extender
Power
adapter
Figure 1. Package contents
Top Panel LEDs and Front Panel USB Port
Use the LEDs during installation to find the best location for the extender or to monitor the
extender performance. The following figure shows the extender in upright position, with the
stand attached. (For information about attaching the stand, see Attach the Stand on
page 10.)
2.4 GHz Link Rate LED
5 GHz Link Rate LED
Device to Extender LED
LAN LEDs (1 through 5)
USB LED
USB 3.0 port (on the front panel)
Figure 2. Top panel LEDs and front panel USB port
Overview
AC1200 WiFi Range Extender
The following table describes the LEDs.
Table 1. Front panel LEDs
LED
Description
Green. The 2.4 GHz WiFi connection between the extender and the WiFi
router is optimum.
Note: If you press the WPS button on the rear panel of the extender, the LED
blinks green for two minutes.
2.4 GHz Link Rate LED
Amber. The 2.4 GHz WiFi connection between the extender and the WiFi
router is good.
Note: This LED also lights amber during the startup process of the extender.
After about one minute, the LED lights green or turns off, depending on the
WiFi connection between the extender and the WiFi network.
Red. The 2.4 GHz WiFi connection between the extender and the WiFi router
is poor.
Off. The extender and the WiFi router do not have a 2.4 GHz WiFi connection.
Green. The 5 GHz WiFi connection between the extender and the WiFi router
is optimum.
Note: If you press the WPS button on the rear panel of the extender, the LED
blinks green for two minutes.
5 GHz Link Rate LED
Amber. The 5 GHz WiFi connection between the extender and the WiFi router
is good.
Note: This LED also lights amber during the startup process of the extender.
After about one minute, the LED lights green or turns off, depending on the
WiFi connection between the extender and the WiFi network.
Red. The 5 GHz WiFi connection between the extender and the WiFi router is
poor.
Off. The extender and the WiFi router do not have a 5 GHz WiFi connection.
LAN LEDs
(1 through 5)
Green. An Ethernet device is connected to the LAN port.
Off. No Ethernet device is connected to the LAN port.
Overview
AC1200 WiFi Range Extender
Table 1. Front panel LEDs
LED
Description
Device to Extender
LED
Green. The extender is connected to a computer or WiFi device.
Note: If you press the WPS button on the rear panel of the extender, the LED
blinks green for two minutes.
Amber. The extender is starting or is applying WiFi settings. After about one
minute, the LED turns green.
During the startup process, both Link Rate LEDs also light amber. After about
one minute, these LED light green or turn off, depending on the WiFi
connection between the extender and the WiFi network.
Note: The Device to Extender LED blinks amber during a firmware update.
Off. The extender is not connected to a computer or WiFi device.
USB LED
Solid green. A USB device is connected to the USB port.
Off. No USB device is connected to the USB port.
Rear Panel Ports, Buttons, Antennas, and Connector
The following figure shows the ports, buttons, antennas, and connector on the rear panel of
the extender.
Two preinstalled 5dBi antennas
Ethernet LAN ports
WPS button
On/Off button Power connector
Restore Factory Settings button
Figure 3. Rear panel
Overview
AC1200 WiFi Range Extender
The antennas are preinstalled. In the unlikely situation that an antenna is loose, you must
tighten it. (A loose antenna could affect the performance of the extender.)

To tighten an antenna:
1. Straighten the antenna.
2. Turn the antenna clockwise until tightened.
After you have tightened the antenna, you can change its position.
Attach the Stand
If you prefer to place the extender in upright (vertical) position, attach the stand that comes
with the extender.
Although the extender functions well in either horizontal or vertical position, a horizontal
position might give a better performance.
Figure 4. Attaching the stand
Overview
10
AC1200 WiFi Range Extender

To attach the stand:
1. Place the stand on a flat surface.
2. Hold the extender in upright position with the left side of the extender pointing down. (The
left side has three rectangular openings.)
The top panel of the extender and the three vertical support posts of the stand must face
the same direction.
3. Lower the extender onto the stand until the support posts of the stand snap into the
rectangular openings of the extender.
Attach the Rubber Feet
If you prefer to place the extender in horizontal position, you can attach the rubber feet that
come with the extender.
Figure 5. Attaching the rubber feet

To attach the rubber feet:
1. Place the extender upside down, with the red panel facing you. (The red panel is the
bottom.)
2. In each corner, attach a rubber foot in such a way that it covers the triangle.
Overview
11
AC1200 WiFi Range Extender
Retrieve and Display the Product Label
The product label that you can retrieve from the bottom panel of the extender contains the
preset login information, serial number, security pin, MAC addresses of the radios, and other
information.

To retrieve the product label from the extender:
1. Place the extender upside down, with the red panel facing you. (The red panel is the
bottom.)
2. Locate the label handle with NETGEAR printed on it, and pull out the product label.
Label handle
Figure 6. Pulling out the product label
Preset login information
Serial number
Security pin
MAC address of the 2.4 GHz radio
MAC address of the 5 GHz radio
Figure 7. Product label
Overview
12
AC1200 WiFi Range Extender
When to Use Your Extender
NETGEAR recommends that you connect to the extender only when your existing home
network connection is poor. Data traffic routed through the extender is inherently slower than
traffic routed directly from the network.
NETGEAR recommends that you connect through the extender network only when the WiFi
device is in a “dead zone” where connection from the existing network is poor or nonexistent.
How the Extender Works
The extender works like a bridge between a WiFi router (or a WiFi access point) and a WiFi
device outside the range of the WiFi router. The extender performs two main jobs:
•
The extender connects to a WiFi network that is up and running.
When the extender connects over WiFi to an existing network, it functions as a network
client, similar to how a WiFi device connects to a network.
•
The extender acts as an access point for WiFi devices.
The extender broadcasts its own WiFi network that WiFi devices can join. In its role as an
access point, the extender performs tasks that WiFi routers do, such as broadcasting its
network name (SSID).
The extender must do each of these jobs so that both ends of the bridge are in place.
WiFi Range
Extender
Boosts the range of your
existing WiFi and creates
a stronger signal in
hard-to-reach areas.
Existing WiFi
Sometimes your router
does not provide the WiFi
coverage you need.
Figure 8. Range extender in a home
Overview
13
AC1200 WiFi Range Extender
Support for the 801.11ac Networking Standard
The extender supports the 802.11ac networking standard. This new standard offers better
speed, improved reliability, and more range than older WiFi networking standards.
The extender is backward compatible with earlier WiFi standards. However, to get the
benefits of 802.11ac, your WiFi router must support the 802.11ac WiFi networking standard.
To learn more about the 802.11ac WiFi networking standard, visit
http://www.netgear.com/landing/80211ac/.
Figure 9. Speed comparison between the 802.11n and 802.11ac standards
Overview
14
2.
Get Started
This chapter covers the following topics:
•
Use the Extender in Extender Mode
•
Use the Extender in Access Point Mode
•
Access Extender Settings
•
Run Smart Setup
15
AC1200 WiFi Range Extender
Use the Extender in Extender Mode
The extender repeats signals from an existing WiFi router or access point. Place the
extender, apply power, and connect the extender to your WiFi network.
Note: You can also use the extender as a WiFi access point and create a
new WiFi hotspot by using a wired Ethernet connection. See Use the
Extender in Access Point Mode on page 21.
Set Up the Extender Hardware

To set up the extender hardware:
1. Attach the stand or the rubber feet.
For more information, see Attach the Stand on page 10 or Attach the Rubber Feet on
page 11.
2. Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup process.
3. Connect the power adapter to the extender and plug it into an electrical outlet.
Wait for the Power LED to light green.
If the Power LED does not light green, press the Power On/Off button on the extender.
The Link Rate LEDs and the Device to Extender LED light amber and then turn off.
Connect to an Existing WiFi Network
To extend the range of your WiFi network, you must connect the extender to your existing
WiFi network. You can do this in one of two ways:
•
Connect with WPS. For more information, see Connect with WPS on page 16.
•
Connect with web browser setup. For more information, see Connect with Web
Browser Setup on page 18.
Connect with WPS
You can use WiFi Protected Setup (WPS) to connect the extender to your WiFi router without
typing your existing router’s WiFi network name (SSID) or WiFi password.
If you do not want to use WPS, see Connect with Web Browser Setup on page 18.

To use WPS to connect the extender to your WiFi router:
1. Make sure that the extender is powered on.
Get Started
16
AC1200 WiFi Range Extender
2. Press the WPS button on the extender.
Both Link Rate LEDs
minutes.
and the Device to Extender LED
blink green for two
3. Within two minutes, press the WPS button on your WiFi router.
When the extender connects to your existing WiFi network, the WPS LED on the
extender lights and the Link Rate LED lights. If the Link Rate LED does not light, try
again. If it still does not light, see Connect with Web Browser Setup on page 18.
4. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender
to the 5 GHz band.
5. Unplug the extender and move it to a new location that is about halfway between your router
and the area with a poor router WiFi signal.
DO
DON’T
The location that you choose must be within the range of your existing WiFi router
network.
6. Plug the extender’s power adapter into an electrical outlet and wait for the Power LED to
light green.
7. Use the Link Rate LEDs to help you choose a spot where the extender-to-router connection
is optimal.
8. If a Link Rate LED does not light amber or green, plug the extender’s power adapter into an
outlet closer to the router and try again.
Keep moving the extender to outlets closer to the router until a Link Rate LED lights
amber or green.
9. On your computer or WiFi device, find and connect to the new extended WiFi network.
The extender creates two new extended WiFi networks. The extender’s new WiFi
network names are based on your existing WiFi network name, with _EXT at the end of
the name.
For example:
•
Existing WiFi network name. MyNetworkName
•
New extended network names. MyNetworkName_2GEXT and
MyNetworkName_5GEXT
Use the same WiFi password that you use for your WiFi router.
10. Test the extended WiFi range by moving your computer or WiFi device to the area with a
poor router WiFi signal:
Get Started
17
AC1200 WiFi Range Extender
a. Leave your computer or WiFi device in the area with a poor router WiFi signal and
return to the extender.
b. Check the Device to Extender LED on the extender:
• If the Device to Extender LED is solid green or amber, your extended WiFi
network reaches the area with a poor router WiFi signal and your network setup is
complete.
•
If the Device to Extender LED is red, your extended WiFi network does not reach
the area with a poor router WiFi signal.
You must move the computer or WiFi device closer to the extender until the
Device to Extender LED turns solid green or amber.
Connect with Web Browser Setup
1. Use a WiFi network manager on the computer or WiFi device to find and connect to the
NETGEAR_EXT (SSID) WiFi network.
After the connection with the computer or WiFi device is established, the Device to
Extender LED
lights solid green.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Click the NEW EXTENDER SETUP button.
5. Complete the fields on the page and click the NEXT button.
6. Select the WiFi Range Extender button.
Get Started
18
AC1200 WiFi Range Extender
The extender searches for WiFi networks in your area and displays a list.
7. Select a WiFi network to extend and click the NEXT button.
If you do not want to extend both WiFi bands, clear the 2.4GHz WiFi Networks or the
5 GHz WiFi Networks check box.
8. In the Password (Network Key) field, type the existing WiFi network password (also called
passphrase or security key) and click the NEXT button
9. Set the network name (SSID) and password for your new extender WiFi network and click
the NEXT button.
Wait for the page to display a list of available extended WiFi networks, which could take
up to one minute.
10. Connect the computer or WiFi device to the new extended WiFi network using the SSID and
password that you created in Step 9.
Note: To connect additional devices, repeat Step 10.
11. Make sure that your computer or WiFi device is connected before you click the Continue
button.
12. Click the Continue button.
A message displays confirming that the extender is connected and ready.
13. Click the Next button.
The registration page displays.
14. Complete the registration fields and click the Finish button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status page displays.
15. Unplug the extender and move it to a new location that is about halfway between your router
and the area with a poor router WiFi signal.
DO
DON’T
The location that you choose must be within the range of your existing WiFi router
network.
16. Plug the extender into an electrical outlet and wait for the Power LED to light green.
17. Use the Link Rate LEDs to help you choose a spot where the extender-to-router connection
is optimal.
Get Started
19
AC1200 WiFi Range Extender
18. If the Link Rate LEDs do not light amber or green, plug the extender’s adapter into an outlet
closer to the router and try again.
Keep moving the extender to outlets closer to the router until a Link Rate LED lights
amber or green.
19. Reconnect your computer or WiFi device to the new extended WiFi network.
20. Test the extended WiFi range by moving your computer or WiFi device to the area with a
poor router WiFi signal:
a. Leave your computer or WiFi device in the area with a poor router WiFi signal and
return to the extender.
on the extender:
b. Check the Device to Extender LED
•
If the Device to Extender LED is solid green or amber, your extended WiFi
network reaches the area with a poor router WiFi signal and your network setup is
complete.
•
If the Device to Extender LED is red, your extended WiFi network does not reach
the area with a poor router WiFi signal.
You must move the computer or WiFi device closer to the extender until the
Device to Extender LED turns solid green or amber.
Connect Ethernet-Enabled Devices
After the extender is connected to your existing WiFi network, you can connect wired devices
to the extender using Ethernet cables. Those devices can then access your existing network
through the extender’s WiFi connection.
Figure 10. Connect an Ethernet-enabled device to an Ethernet LAN port
Get Started
20
AC1200 WiFi Range Extender
Use the Extender in Access Point Mode
You can use the extender as a WiFi access point, which creates a new WiFi hotspot by using
a wired Ethernet connection.

To install the extender as an access point:
1. Attach the stand or the rubber feet.
For more information, see Attach the Stand on page 10 or Attach the Rubber Feet on
page 11.
2. Use an Ethernet cable to connect your router to the Ethernet port on the extender.
Ethernet
Extender Ethernet LAN port
WiFi router
3. Turn on your extender.
Plug the extender into an electrical outlet. Press the Power button if necessary.
The Link Rate LEDs and the Device to Extender LED light amber and then turn off.
4. Use a WiFi network manager on a computer or WiFi device to find and connect to the
NETGEAR_EXT (SSID) WiFi network.
After the connection with the computer or WiFi device is established, the Device to
Extender LED
lights solid green.
Note: In access point mode, you can connect your computer or WiFi device
to the extender only using a WiFi connection.
5. Launch a web browser.
6. Enter www.mywifiext.net in the address field of the browser.
Get Started
21
AC1200 WiFi Range Extender
The first time that you log in to the extender, the Create Account page displays.
7. Complete the fields and click the NEXT button.
8. Click the ACCESS POINT button.
The extender checks for an Internet connection through the router that you connected to
the extender.
9. When prompted, set the network name (SSID), security option, and password for each WiFi
band, and click the NEXT button.
Your settings are applied and the extender is ready to be used as an access point.
10. Use a WiFi network manager on the computer or WiFi device to connect to the new access
point WiFi network.
11. Click the Continue button.
A page displays that says you successfully created an access point.
12. Click the Next button.
The registration page displays.
13. Follow the onscreen instructions to register your extender.
Get Started
22
AC1200 WiFi Range Extender
Access Extender Settings
After installation, you can log in to the extender to view or change the extender’s settings.

To log in to the extender:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the
new extended WiFi network.
After the connection with the computer or WiFi device is established, the Device to
Extender LED
lights solid green.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
Run Smart Setup
You can use Smart Setup to change the extender settings. This is an easy way to connect the
extender to a different router or to change the extender WiFi network name (SSID) or WiFi
password.

To run Smart Setup:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the
new extended WiFi network.
After the connection with the computer or WiFi device is established, the Device to
Extender LED
lights solid green.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Click the SMART SETUP button.
The Welcome page displays.
6. Click the WIFI RANGE EXTENDER button.
The extender scans for WiFi signals and finds the WiFi networks in your area and
displays a list.
Get Started
23
AC1200 WiFi Range Extender
7. If you do not want to extend both WiFi bands, clear the 2.4GHz WiFi Networks or the 5
GHz WiFi Networks check box.
8. Select your WiFi network and click the NEXT button.
9. When prompted, enter the password to connect to your WiFi network and click the NEXT
button.
The extender connects to your existing router’s WiFi network.
10. When prompted, complete the fields to name your extended networks and click the NEXT
button.
The extender applies your settings to its WiFi network names and WiFi passwords.
During this change, the extender disconnects you from its WiFi network.
The following page displays:
11. Use a WiFi network manager on the computer or WiFi device to connect to the new
extended WiFi network and click the Continue button.
12. Click the Next button.
The Status page displays.
Get Started
24
3.
Optimize Extender Performance
This chapter covers the following topics:
•
Boost Your Video Streaming
•
Adjust the WiFi Coverage
25
AC1200 WiFi Range Extender
Boost Your Video Streaming
Get the most out of your HD entertainment with FastLane technology. With FastLane
technology, the extender connects to your router using one band and connects to your
devices using another band. Because a band is dedicated to each function, performance is
enhanced.
If all your devices and your WiFi router support only the 2.4 GHz band, or all your devices
and your WiFi router support only the 5 GHz band, do not enable FastLane Technology.
When you enable FastLane Technology, two options are available:

•
Use the 2.4 GHz band to connect the extender to the WiFi devices and use the 5 GHz
band to connect the extender to the WiFi router. Use this mode if your WiFi router
supports the 5 GHz band but the devices that you want to use for gaming and streaming
support the 2.4 GHz band.
•
Use the 5 GHz band to connect the extender to the WiFi devices and use the 2.4 GHz
band to connect the extender to the WiFi router. Use this mode if the devices that you
want to use for gaming and streaming support the 5 GHz band but your WiFi router
supports the 2.4 GHz band.
To activate FastLane mode:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Do More > FastLane.
Optimize Extender Performance
26
AC1200 WiFi Range Extender
6. Select a radio button:
• Router-to-Extender in 2.4 GHz only and Extender-to-Device in 5 GHz only.
•
Router to Extender in 5 GHz only and Extender-to-Device in 2.4 GHz only.
7. Click the Save button.
Your changes are saved.
Adjust the WiFi Coverage
You can set the extender’s WiFi coverage depending on how large you want your coverage
area to be.

To adjust the WiFi coverage:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Do More > WiFi Coverage.
6. Select a Wireless Output Power radio button.
If your extender is covering a small area, select a lower-output power percentage. If your
extender is covering a large area, select a higher-output power percentage.
7. Click the SAVE button.
Your settings are saved.
Optimize Extender Performance
27
4.
Extender Network Settings
This chapter covers the following topics:
•
View Connected Devices
•
View WiFi Settings
•
Change the WiFi Network Name
•
Turn Off the SSID Broadcast to Create a Hidden Network
•
Disable or Enable the WiFi Radios
•
Change the WiFi Speed
•
Use WPS to Add a Computer to the Extender’s WiFi Network
•
Deny Access to a Computer or WiFi Device
•
Set Up an Access Schedule
•
Change the Extender’s Device Name
•
Set Up the Extender to Use a Static IP Address
•
Use the Extender with MAC Filtering or Access Control
28
AC1200 WiFi Range Extender
View Connected Devices
You can view a list of devices that are connected to the extender network.

To view connected devices:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Connected Devices.
View WiFi Settings

To view the WiFi settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
Extender Network Settings
29
AC1200 WiFi Range Extender
5. Select Settings > Wireless.
Change the WiFi Network Name

To change the WiFi network name:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
Extender Network Settings
30
AC1200 WiFi Range Extender
5. Select Settings > Wireless.
6. In each Network Name (SSID) field, type a network name.
7. Click the SAVE button.
Your settings are saved.
Turn Off the SSID Broadcast to Create a Hidden Network
By default, the extender broadcasts its WiFi signal so that its wireless network names
(SSIDs) are easy for you to find and connect to from your computer, tablet, or smartphone.
You can turn off the SSID broadcast to create a hidden WiFi network. To connect to a hidden
network you must know its SSID and password and manually enter them.

To turn off the SSID broadcast to create a hidden network:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
Extender Network Settings
31
AC1200 WiFi Range Extender
5. Select Settings > Wireless.
6. Clear the Broadcast the Network name (SSID) check box.
7. Click the SAVE button.
Your settings are saved.
Disable or Enable the WiFi Radios
By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands. If
you disable the WiFi radios, then no one can connect with WiFi to the extender.

To disable or enable the WiFi radios:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
Extender Network Settings
32
AC1200 WiFi Range Extender
5. Select Settings > Wireless.
6. Select or clear the Enable 2.4 GHz WiFi check box.
7. Select or clear the Enable 5 GHz WiFi check box.
8. Click the SAVE button.
Your settings are saved.
Change the WiFi Speed

To change the WiFi speed:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
Extender Network Settings
33
AC1200 WiFi Range Extender
5. Select Settings > Wireless.
6. In each WiFi Speed menu, select a speed.
7. Click the SAVE button.
Your settings are saved.
Use WPS to Add a Computer to the Extender’s WiFi
Network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s
network without entering the WiFi network passphrase or key. Instead, you use a WPS button
or enter a PIN to connect.
If you use the push button method, the WiFi device that you are trying to connect must
include a physical push button or a software button. If you use the PIN method, you must
know the PIN of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi
security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on the
extender network and generates a random passphrase. You can view this passphrase on the
WiFi Settings page (for more information, see View WiFi Settings on page 29).
For information about using WPS to connect the extender to a WiFi network during setup,
see Use the Extender in Access Point Mode on page 21.
Extender Network Settings
34
AC1200 WiFi Range Extender
Use WPS with the Push Button Method
To use the Push Button method to connect a WiFi device to the extender’s WiFi network, the
WiFi device that you are trying to connect must have a physical push button or a software
push button.

To use WPS to add a computer or WiFi device to the extender’s WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
6. Leave the Push Button (recommended) radio button selected.
7. Click the WIFI PROTECTED SETUP (WPS) button.
Both Link Rate LEDs
minutes.
and the Device to Extender LED
blink green for two
For two minutes, the extender attempts to add the computer or WiFi device to its WiFi
network.
8. Within two minutes, go to the computer WiFi device and press or click its WPS button.
9. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.
Use WPS with the PIN Method
To use the PIN method to connect a WiFi device to the extender’s WiFi network, you must
know the PIN of the WiFi device that you are trying to connect.
Extender Network Settings
35
AC1200 WiFi Range Extender

To add a computer or WiFi device to the extender’s WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS).
The Connect Devices (WPS) page displays.
6. Select the PIN Number radio button.
7. Type the PIN of the WiFi device in the field.
8. Click the NEXT button.
For four minutes, the extender attempts to find the computer or WiFi device.
9. Within four minutes, go to the WiFi device and use its WPS software to join the WiFi
network.
10. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices.
The WiFi device displays onscreen.
Deny Access to a Computer or WiFi Device
By default, access control is disabled so that it is easy for you to connect to the extender’s
WiFi networks.
You can deny network access to specific computers and WiFi devices based on their MAC
addresses. Each network device is assigned a MAC address, which is a unique 12-character
physical address, containing the hexadecimal characters 0–9, a–f, or A–F only, and
separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the
label of the WiFi device. If you cannot access the label, you can display the MAC address
using the network configuration utilities of the computer. You might also find the MAC
addresses on the Connected Devices page (see View Connected Devices on page 29).
Extender Network Settings
36
AC1200 WiFi Range Extender

To use WiFi access control to deny access:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Connected Devices.
6. In the WiFi Devices section, select the Enable Access Control check box.
The WiFi devices table displays the name and MAC address of WiFi devices that are
connected to the extender.
7. Select the Deny check box for the device.
8. Click the SAVE button.
Your settings are saved and that device cannot connect to the extender’s WiFi network.
Set Up an Access Schedule
You can control access to all users during specific periods of the day. You can set up an
access schedule that prevents Internet access through the extender network based on the
times that you set.
Extender Network Settings
37
AC1200 WiFi Range Extender

To set up an access schedule:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Do More > Access Schedule.
6. Select the Access Schedule On radio button.
The page adjusts.
7. In the Days menu and the Time menu, select the days and time when you want to disable
Internet access.
8. Click the Add Time button to add the time that you specified to the Scheduled Times table.
9. Click the SAVE button.
Your settings are saved.
Change the Extender’s Device Name
The default name is EX6200.

To change the extender’s device name:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
Extender Network Settings
38
AC1200 WiFi Range Extender
5. Select Settings > WiFi Settings.
The WiFi Settings page displays.
6. Scroll down and click the IP Address heading to expand the IP address settings.
7. In the Device Name field, type a name.
8. Click the SAVE button.
Your settings are saved.
Set Up the Extender to Use a Static IP Address
The extender comes set up to use a dynamic IP address, which is the correct setting for most
home networks.

To set up the extender to use a static IP address:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > WiFi Settings.
The WiFi Settings page displays.
Extender Network Settings
39
AC1200 WiFi Range Extender
6. Scroll down and click the IP Address heading to expand the IP address settings.
By default, the Dynamically get IP Address from Router radio button is selected.
7. Select the Use Static IP Address radio button.
8. Complete the fields to specify the IP network IP addresses.
9. Click the SAVE button.
Your settings are saved.
Use the Extender with MAC Filtering or Access Control
When the WiFi device connects through the extender to your router, the MAC address of the
wireless device that is shown on the router is translated to another MAC address. If your
router's MAC filter, wireless access control, or ACL is enabled, the WiFi device connects to
the extender but cannot get an IP address from the extender and cannot access the Internet.
To allow the wireless device to receive an IP address from the extender and access the
Internet, you must provide the translated MAC address to the router.

To add a translated MAC address to your router:
1. Log in to your router and disable the MAC filter, wireless access control, or ACL.
For more information about how to disable your router’s MAC filter, wireless access
control, or ACL, see your router’s documentation.
2. Power on the extender and connect all of your WiFi devices to the extender.
3. Make sure that the Link Rate LED remains lit.
4. Log in to your extender:
a. Launch a web browser.
b. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
c. Enter your user name and password.
5. Click the Menu icon
Extender Network Settings
40
AC1200 WiFi Range Extender
The extender menu displays.
6. Select Settings > Connected Devices.
The Connected Devices section displays the MAC addresses and virtual MAC addresses
for computers and WiFi devices that are connected to the extender network.
7. On the router, add the extender’s virtual MAC address and all the virtual MAC addresses
connected to the extender network to your router’s MAC filter table.
8. Enable the router’s MAC filter, wireless access control, or ACL.
Extender Network Settings
41
5.
Maintain and Monitor the Extender
This chapter covers the following topics:
•
Change the Extender User Name and Password
•
Turn Password Protection Off and On
•
Recover a Forgotten User Name or Password
•
Automatically Adjust for Daylight Saving Time
•
Back Up and Manage the Extender Configuration
•
Return the Extender to Its Factory Default Settings
•
Update the Firmware
•
Turn the NETGEAR Logo LED On or Off
•
Restart the Extender Remotely
42
AC1200 WiFi Range Extender
Change the Extender User Name and Password
You can change the user name and password to log in to the extender.

To add an extender user:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Password.
6. In the New User Name field, type an user name.
7. Type the password in the New Password field and the Verify Password field.
8. Select questions and answers.
9. Click the SAVE button.
Your settings are saved.
Maintain and Monitor the Extender
43
AC1200 WiFi Range Extender
Turn Password Protection Off and On
NETGEAR recommends that you leave password protection on to help keep your network
secure. You can turn password protection off and on.

To turn password protection off and on:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Password.
The Password Settings page displays.
6. Select the Password Off or Password On radio button.
7. Click the SAVE button.
Your settings are saved.
Recover a Forgotten User Name or Password
If you changed the password to access the extender and set up password recovery, you can
recover your password if you lose it.

To recover your password to access the extender:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
You are prompted to enter a user name and password.
3. Click the Username & Password Help link.
A page displays requesting the answers to your security questions.
4. Enter the saved answers to your security questions.
5. Click the NEXT button.
Your email and password are displayed.
6. Click the BACK button.
A login window opens.
7. Log in to the extender.
Maintain and Monitor the Extender
44
AC1200 WiFi Range Extender
Automatically Adjust for Daylight Saving Time

To set up the extender to automatically adjust for daylight saving time:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Do More > Access Schedule.
The Access Schedule page displays.
6. Select the Automatically adjust for daylight savings time check box.
7. click the SAVE button.
Your settings are saved.
Manually Set the Extender Clock

To manually set the extender clock:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Do More > Access Schedule.
The Access Schedule page displays.
6. In the Extender Clock section, select the Manual radio button.
7. To specify the time, complete the fields or click the Sync Clock button to synchronize the
extender time to the time on the computer or WiFi device that you are using.
8. Click the SAVE button.
Your settings are saved.
Maintain and Monitor the Extender
45
AC1200 WiFi Range Extender
Back Up and Manage the Extender Configuration
When the extender works correctly after initial setup, NETGEAR recommends that you back
up the extender configuration settings. After you have back up the settings, if you change the
extender configuration settings but are not content with the new settings, you can restore the
extender configuration to the backed-up settings.
Back Up the Configuration Settings
You can back up the configuration file of the extender.

To back up the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Other.
6. Click the Backup button.
Your browser extracts the configuration file from the extender. By default, the name of the
backup file is NETGEAR_Ex6200.cfg.
7. If your browser is not set up to save downloaded files automatically, locate where you want
to save the file.
Maintain and Monitor the Extender
46
AC1200 WiFi Range Extender
Restore the Configuration Settings
You can restore the configuration file of the extender to a previously saved configuration file.

To restore the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Other Settings.
6. Click the Browse button.
7. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_EX6200.cfg.
CAUTION:
After you click the Restore button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
8. Click the Restore button.
A confirmation pop-up window opens.
9. Confirm your decision.
Maintain and Monitor the Extender
47
AC1200 WiFi Range Extender
The extender configuration is restored and the extender restarts. This process takes
about one minute.
Return the Extender to Its Factory Default Settings
Under some circumstances (for example, if you lose track of the changes that you made to
the extender settings), you might want to erase the configuration and reset the extender to
factory default settings.
To reset the extender to factory default settings, you can either use the Restore Factory
Settings button on the rear panel or log in to the extender and reset it.
For a list of factory default settings, see Factory Default Settings on page 76.

To use the Restore Factory Settings button to return the extender to factory default
settings:
CAUTION:
This process erases any settings that you configured in the extender.
1. Insert a straightened paper clip into the hole of the Restore Factory Settings button
and hold it for about seven seconds.
Restore Factory
Settings button
2. Release the button.
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting!
The extender resets and restarts. This process takes about one minute.
Maintain and Monitor the Extender
48
AC1200 WiFi Range Extender

To log in to the extender and reset the extender’s to factory settings:
CAUTION:
This process erases any settings that you configured in the extender.
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Other.
CAUTION:
After you click the Erase button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
6. Click the Reset button.
A confirmation pop-up window opens.
7. Confirm your decision.
The extender returns to its factory settings and restarts. This process takes about one
minute.
Maintain and Monitor the Extender
49
AC1200 WiFi Range Extender
Update the Firmware
Unless you changed the settings in the Firmware Update page previously, the extender is set
up to check for new firmware automatically at login.

To check manually for new firmware and, if available, update the firmware:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Firmware Update.
6. Click the Check Online button.
7. If new firmware is available, follow the onscreen prompts to download it onto your computer.
Note: You might need to unzip the firmware file.
8. Click the Browse button.
9. Locate and select the new firmware file.
The firmware file name ends with a .chk extension.
CAUTION:
After you click the Upload button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
10. Click the Upload button.
The firmware update starts and the extender restarts. The firmware update process takes
a couple of minutes.
Maintain and Monitor the Extender
50
AC1200 WiFi Range Extender
Turn the NETGEAR Logo LED On or Off
When you power on the extender, the NETGEAR logo LED lights white. You can change this
setting to turn off the LED.

To turn the NETGEAR logo LED on or off:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Other.
The Other Settings page displays. The LED Logo section displays the LED status as on
or off.
6. Click the OFF or ON button.
The NETGEAR logo LED turns off or on.
Restart the Extender Remotely
You can log in to the extender and restart it. When the extender restarts, all computers and
WiFi devices that are connected to its WiFi network are automatically disconnected.

To restart the extender remotely:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Settings > Other.
The Other Settings page displays.
6. Click the RESTART button and click the Yes button to confirm.
The extender restarts, which takes about two minutes.
Maintain and Monitor the Extender
51
6.
Share a USB Storage Device
This chapter describes how to access and configure a USB storage drive attached to your
extender. The USB port on the extender can be used only to connect USB storage devices such
as flash drives or hard drives, or a printer. Do not connect computers, USB modems, CD drives,
or DVD drives to the extender USB port.
This chapter contains the following sections:
•
USB Storage Device Requirements
•
Access a USB Storage Device Attached to the Extender
•
Turn the USB Port Off and On
•
Add a Network Folder on a USB Drive
•
Password-Protect a Folder on a USB Storage Device
•
Use the Extender USB Port to Share a Printer
52
AC1200 WiFi Range Extender
USB Storage Device Requirements
The extender works with most USB-compliant external flash and hard drives. For the most
up-to-date list of USB drives that the extender supports, visit
http://kbserver.netgear.com/readyshare.
Some USB external hard drives and flash drives require you to load the drivers onto the
computer before the computer can access the USB device. Such USB devices do not work
with the extender.
The extender supports the following file system types for full read and write access:
•
FAT16, FAT32
•
NTFS
•
NTFS with compression format enabled
•
Ext2
•
Ext3
•
Ext4
•
HFS
•
HFS+
Note: Do not connect computers, USB modems, CD drives, or DVD drives
to the extender USB port.
Share Files Across Your WiFi Network
You can share data that is stored on most common USB storage devices across your WiFi
network with ReadySHARE® USB Storage Access.

To access your USB device from a Windows computer:
1. Insert your USB device into the USB 3.0 port on the extender.
2. If your USB device includes a power supply, you must use it when you connect the USB
device to the extender.
When you connect the USB device to the extender USB port, it might take up to two
minutes before it is ready for sharing. By default, the USB device is available to all
computers on your local area network (LAN).
3. Select Start > Run.
4. Enter \\readyshare in the dialog box and click the OK button.
A page automatically opens and displays the files and folders on the device.
Share a USB Storage Device
53
AC1200 WiFi Range Extender

To access your USB device from a Mac:
1. Insert your USB device into the USB 3.0 port on the extender.
If your USB device includes a power supply, you must use it when you connect the USB
device to the extender.
When you connect the USB device to the extender USB port, it might take up to two
minutes before it is ready for sharing. By default, the USB device is available to all
computers on your local area network (LAN).
2. On a Mac that is connected to the network, launch Finder and select
Go > Connect to Server.
3. In the Server Address field, enter smb://readyshare.
4. When prompted, select the Guest radio button.
5. Click the Connect button.
A window automatically opens and displays the files and folders on the device.
Access a USB Storage Device Attached to the Extender
ReadySHARE lets you access and share a USB drive connected to the extender USB port.
(If your USB drive uses special drivers, it is not compatible.)

To connect a USB drive:
1. Insert your USB storage drive into the USB 3.0 port on the front of the extender.
2. If your USB drive uses a power supply, you must use it when you connect the USB drive to
the extender.
When you connect the USB drive to the extender USB port, it might take up to two
minutes before it is ready for sharing. By default, the USB drive is available to all
computers on your local area network (LAN).

To access the USB drive from a Mac:
1. Select Go > Connect to Server.
2. In the Server Address field, type smb://readyshare as the server address.
3. Click the Connect button.
4. When prompted to enter your name and password, select the Guest radio button.
5. Click the Connect button.

To access the USB drive from a Windows computer:
1. Select Start > Run.
2. Enter \\readyshare in the dialog box.
3. Click the OK button.
Share a USB Storage Device
54
AC1200 WiFi Range Extender

To map the USB device to a Windows network drive:

To map the USB device to a Windows network drive:
1. Connect your USB storage device to the USB port on the router.
If your USB device uses a power supply, you must use it when you connect the USB
device to the router.
When you connect the USB device to the extender’s USB port, it might take up to two
minutes before it is ready for sharing. By default, the USB drive is available to all
computers on your local area network (LAN).
2. Select Start > Run.
3. Enter \\readyshare in the dialog box.
4. Click the OK button.
A window automatically opens and displays the USB Storage device.
5. Right-click the USB storage device and select Map network drive.
The Map Network Drive page displays:
6. Select the drive letter to map to the network folder.
7. Click the Finish button.
The USB device is mapped to the drive letter that you specified.
8. To connect to the USB storage device as a different user, select the Connect using
different credentials check box, click the Finish button, and do the following:
a. Type the user name and password.
b. Click the OK button.
The USB storage device is mapped to the drive letter that you specified.
Turn the USB Port Off and On
By default the USB port is on, but you can log in to the extender and turn it off and on.

To turn the USB port off and on:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
Share a USB Storage Device
55
AC1200 WiFi Range Extender
5. Select Do More > USB Port.
6. Select the USB Port On or USB Port Off radio button.
7. Click the SAVE button.
Your settings are saved.
Add a Network Folder on a USB Drive
You can add network folders on the USB storage device.

To add a network folder:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Do More > USB Port.
6. In the Connected Devices section, click the Add Folder button.
7. Browse and select a folder on the USB device.
8. Click the SAVE button.
Your settings are saved.
Share a USB Storage Device
56
AC1200 WiFi Range Extender
Password-Protect a Folder on a USB Storage Device

To password-protect a folder:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Do More > USB Port.
6. To add a folder, in the Connected Devices section, click the Add Folder button.
7. Browse and select a folder on the USB device.
8. To password-protect read access, in the Read Access menu, select Password On.
9. To password-protect write access, in the Write Access menu, select Password On.
10. Click the SAVE button.
Your settings are saved.
Use the Extender USB Port to Share a Printer
By default, the extender is set up to share content on the USB port so that you can connect a
USB storage device. You can share a USB printer instead.

To use the USB port to share a printer:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
Share a USB Storage Device
57
AC1200 WiFi Range Extender
The extender menu displays.
5. Select Do More > USB Port.
6. Select the Share Printer radio button.
7. Follow the onscreen prompts to connect your printer to the USB port and share it.
8. Click the SAVE button.
Your settings are saved.
Share a USB Storage Device
58
7.
Use the Extender as a Media Server
This chapter contains the following sections:
•
Specify ReadyDLNA Media Server Settings
•
Play Media from a USB Drive on TiVo
Note: For information about how to connect the USB drive and to specify its
settings, see Chapter 6, Share a USB Storage Device.
59
AC1200 WiFi Range Extender
Specify ReadyDLNA Media Server Settings
By default, the extender functions as a ReadyDLNA media server, which lets you stream
music and movies from an attached USB device to DLNA/UPnP AV-compliant media players,
such as Xbox360, Playstation, and NETGEAR media players.

To specify media server settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
5. Select Do More > USB Port.
By default, the Enable Media Server and Enable TiVo support check boxes are
selected. This allows the extender to function as a media server and allows the extender
to play media on your TiVo device.
6. To change the name of the media server device, type a new name in the Network/Device
Name field and click the Update button.
7. Leave the Content scan check box selected so that the extender automatically scans and
detects media files that are added to the attached USB device.
Use the Extender as a Media Server
60
AC1200 WiFi Range Extender
Note: The extender scans only shared folders that are set up with full read
access without a password.
8. Click the SAVE button.
Your changes are saved.
Play Media from a USB Drive on TiVo
You can set up your TiVo to access media files stored on a USB device that is connected to
your extender. The TiVo must be on the same network as the extender. This feature supports
the following file formats:
•
Video. See and play mpeg1, and mpeg2 files.
•
Music. See and play MP3 files.
•
Pictures. View images in .jpg format.
You can use the TiVo (Series 2 and up) Home Media Option to play photos and music on
your Windows or Mac computer in your TiVo user interface.

To set up the extender to work with TiVo:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2. In the address field of your browser, enter www.mywifiext.net.
3. When prompted, enter your user name and password.
4. Click the Menu icon
The extender menu displays.
Use the Extender as a Media Server
61
AC1200 WiFi Range Extender
5. Select Do More > USB Port.
6. If it is not yet selected, select the Enable TiVo support check box.
7. Click the SAVE button.
Your changes are saved.

To play videos:
1. On the TiVo, select TiVo Central > My Shows.
2. Go to the bottom of the list and select the EX6200.
Use the Extender as a Media Server
62
AC1200 WiFi Range Extender

To play music or view photos:
1. On the TiVo, select TiVo Central > Music, Photos, & Showcases.
2. Select an item to play or watch.

To copy TiVo files to a computer:
Use a TiVo Desktop accessory, available at
https://www.tivo.com/shop/accessories#streaming-software.
Use the Extender as a Media Server
63
8.
Share a USB Printer
The ReadySHARE Printer utility lets you share a USB printer that is connected to a USB port on
your extender. You can share this USB printer among the Windows and Mac computers on your
network.
This chapter contains the following sections:
•
Install the Printer Driver and Cable the Printer
•
Download the ReadySHARE Printer Utility
•
Install the ReadySHARE Printer Utility
•
Use the Shared Printer
•
View or Change the Status of a Printer
•
Use the Scan Feature of a Multifunction USB Printer
•
Change NETGEAR USB Control Center Settings
64
AC1200 WiFi Range Extender
Install the Printer Driver and Cable the Printer
Some USB printer manufacturers (for example, HP and Lexmark printers) request that you
do not connect the USB cable until the installation software prompts you to do so.

To install the driver and cable the printer:
1. On each computer on your network that shares the USB printer, install the driver
software for the USB printer.
If you cannot find the printer driver, contact the printer manufacturer.
2. Use a USB printer cable to connect the USB printer to the extender USB port.
USB 3.0 port (on the front panel)
Download the ReadySHARE Printer Utility
The utility works on Windows and Mac computers.

To download the utility:
1. Visit www.netgear.com/readyshare.
2. Scroll down to the Print From the Comfort of Your Home Network section at the bottom of
the page.
3. Click one of the following links.
• Download PC installer and get started. This is the utility for Windows computers.
•
Download Mac installer and get started. This is the utility for MAC computers.
4. Follow the onscreen instructions to download the ReadySHARE Printer utility setup file and
install.
Share a USB Printer
65
AC1200 WiFi Range Extender
Install the ReadySHARE Printer Utility
You must install the ReadySHARE Printer utility on each computer that will share the printer.
After you install it, the utility displays as NETGEAR USB Control Center on your computer.

To install the utility:
1. Double-click the ReadySHARE Printer utility setup file that you downloaded.
The InstallShield wizard displays.
2. Follow the wizard instructions to install NETGEAR USB Control Center.
After the InstallShield Wizard completes the installation, the NETGEAR USB Control
Center prompts you to select a language:
Share a USB Printer
66
AC1200 WiFi Range Extender
3. Select a language from the list and click the OK button.
Some firewall software, such as Comodo, blocks NETGEAR USB Control Center from
accessing the USB printer. If you do not see the USB printer displayed, you can disable
the firewall temporarily to allow the utility to work.
4. Select the printer and click the Connect button.
The printer status changes to Manually connected by Mycomputer. Now, only your
computer can use the printer.
5. Click the Disconnect button.
The status changes to Available. Now all computers on the network can use the printer.
6. To exit the utility, select System > Exit.
Use the Shared Printer
For each computer, after you click the Connect and Disconnect buttons once, the utility
automatically manages the printing queue and handling. By default, the utility starts
automatically whenever you log on to Windows and runs in the background.

To manually connect and print:
1. Click the NETGEAR USB Control Center icon
The main page displays.
2. Click the Connect button.
The printer status changes to Manually connected by Mycomputer. Now, only the
computer you are using can use this printer.
3. Use the print feature in your application to print your document.
4. To release the printer so that all computers on the network can use it, click the Disconnect
button.
Share a USB Printer
67
AC1200 WiFi Range Extender

To print and release the printer to any computer on the network:
1. To print your document, use the print feature in your application.
The NETGEAR USB Control Center automatically connects your computer to the USB
printer and prints the document. If another computer is already connected to the printer,
your print job goes into a queue to wait to be printed.
2. If your document does not print, use the NETGEAR USB Control Center to check the status.
View or Change the Status of a Printer

To view or change the status:
1. Click the NETGEAR USB Control Center icon
The Status column shows the status for each device:
•
Available. No print jobs are in process. You can use the USB printer from any
computer in the network.
•
Connected. Your computer is connected to the printer and will be released when your
print job is done.
•
Manually Connected by. Only the connected computer can use the printer.
•
Waiting to Connect. Your computer is not connected to the shared printer yet.
2. To print from your computer when the status shows Manually connected by to another
computer, click the Disconnect button.
The printer is released from the connection and the status changes to Available.
3. To print from your computer when the status shows Waiting to Connect:
a. Click the Connect button.
The printer status changes to Manually connected by Mycomputer. Now, only your
computer can use the printer.
b. To allow the printer to be shared, click the Disconnect button.
The printer is released from the connection and the status changes to Available.
Share a USB Printer
68
AC1200 WiFi Range Extender
Use the Scan Feature of a Multifunction USB Printer
If your USB printer supports scanning, you can also use the USB printer for scanning. For
example, the USB printer displayed in the Windows Printers and Faxes window is ready for
print jobs.

To use the scan feature of a multifunction USB printer:
1. Launch the NETGEAR USB Control Center.
2. Make sure that the printer status shows as Available.
3. Click the Network Scanner button.
The scanner page displays so that you can use the USB printer for scanning.
Share a USB Printer
69
AC1200 WiFi Range Extender
Change NETGEAR USB Control Center Settings
You can stop the NETGEAR USB Control Center from starting automatically when you log in
to Windows. You can also change the language and specify the time-out to release the
printer connection.

To turn off automatic NETGEAR USB Control Center startup:
1. Select Tools > Configuration.
2. Clear the Automatically execute when logging on Windows check box.
3. Click the OK button.
Your change is saved.

To change the language:
1. Select Tools > Configuration.
2. In the Language list, select a language.
3. Click the OK button.
The next time NETGEAR USB Control Center starts, the language changes.

To specify the time-out:
1. Select Tools > Configuration.
2. In the Timeout field, type the number of minutes.
The time-out is the number of minutes that a computer holds its connection to the printer
when the connection isn’t being used.
3. Click the OK button.
Your change is saved.
Share a USB Printer
70
9.
FAQs and Troubleshooting
This chapter covers the following topics:
•
FAQs
•
Cannot Connect to the Extender
•
Cannot Join a WiFi Network and Receive an Error Message
71
AC1200 WiFi Range Extender
FAQs
This section provides answers for difficulties you might experience with the extender.
The web browser setup guide keeps asking me for my network password (passphrase)
or security key, and I am sure that I entered the correct password. What can I do?
The extender is probably placed at the borderline of the range covered by the router or
access point. To improve your signal strength, move your extender closer to your router and
make sure that the 2.4 GHz or 5 GHz Link Rate LED lights solid amber or green.
Table 2. Link Rate LED colors
LED Color
Performance
The extender provides the best performance.
The extender provides a workable performance.
The extender provides a poor performance.
Off
The extender cannot function.
If you are using WEP security, make sure that you are typing the network password in the
correct field.
I am connected to NETGEAR_EXT and launched a browser. Why can’t I see the web
browser setup guide?
Try these troubleshooting steps:
•
Make sure that your computer is set up to use DHCP (most are).
•
Make sure that the Device to Extender LED
IP address.
•
Relaunch the web browser and enter www.mywifiext.net in the address field. Enter your
user name and password.
•
If you are installing the extender as an access point, make sure that you are connecting
your computer or WiFi device to the extender through a WiFi connection instead of an
Ethernet connection.
is green and that you are using a valid
I forgot my login email and password. What can I do?
In the login window, click the Username & Password Help link to answer the security
questions you set up during the initial setup.
If you forgot the answers to your security questions, do the following to set up your login
credentials again:
1. Reset the extender to its factory default settings.
FAQs and Troubleshooting
72
AC1200 WiFi Range Extender
For more information about how to reset the extender, see Return the Extender to Its
Factory Default Settings on page 48.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
The login window opens.
4. Click the NEW EXTENDER SETUP button.
The Create Account page displays.
5. Complete the fields to set up your user name and password.
My router security is WEP, and I entered the wrong passphrase or security key on the
extender. I cannot access the extender anymore. What can I do?
The extender cannot check to see if the WEP passphrase is correct. If you entered the wrong
passphrase, your wireless device is not able to get the IP address from the extender. You
must reset the extender to its factory default settings to get the IP address back. See Factory
Default Settings on page 76.
Can I set up the extender in extender mode if I connect it to the router or access point
with an Ethernet cable?
No. The extender is designed to connect wirelessly to the router or access point if it is in
extender mode. If the extender is in access point mode, you can connect it to the router or
access point with an Ethernet connection.
For more information about access point mode, see Use the Extender in Access Point Mode
on page 21.
Cannot Connect to the Extender
If you cannot connect to the extender, determine what prevents you from connecting:
•
If you forgot your user name or password, click the Username & Password Help link.
For more information, see FAQs on page 72.
•
If your browser displays an error page, include http:// in the address field of your browser
by typing http://www.mywifiext.net.
•
If you already set up the extender but can no longer connect to it over WiFi, check to see
if the Link Rate LED is off or red.
•
If you cannot get a WiFi connection working, you can use an Ethernet cable to connect
your computer to the extender.
Cannot Join a WiFi Network and Receive an Error Message
To join a WiFi network, you must know its network name (also called the SSID) so that you
can select it. If the network is secure, you must know the passphrase or key. If the extender
does not connect to the network that you select, the cause might be one of the following:
FAQs and Troubleshooting
73
AC1200 WiFi Range Extender
•
It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart
Setup (see Run Smart Setup on page 23) to select a WiFi network and retype the
passphrase or key. The passphrase or key is case-sensitive. For example,
PASSWORD25 is not the same as Password25 or password25.
•
If the extender cannot detect your WiFi network, check to see if your WiFi network is still
working. Make sure that the WiFi router is turned on. If possible, move the extender
closer to the WiFi router.
•
If the extender Link Rate LED is red, the WiFi connection between the WiFi router and the
extender is poor. You can establish the best connection with a clear line of sight between
the extender and the WiFi router. Make sure that no physical obstacles exist between the
extender and the WiFi router, and try to move the extender closer to the WiFi router.
If you use Smart Setup, and the extender does not connect to the WiFi router, does not
connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup
displays a message to notify you that the extender is not configured.
To run Smart Setup again, click the YES button. To manually configure the extender, click the
NO, CONFIGURE MANUALLY button.
FAQs and Troubleshooting
74
A.
Factory Settings and Technical
Specifications
This appendix covers the following topics:
•
Factory Default Settings
•
Technical and Environmental Specifications
75
AC1200 WiFi Range Extender
Factory Default Settings
To reset the extender to factory default settings, you can use either the Restore Factory
Settings button on the rear panel or the Erase function. For more information, see Return the
Extender to Its Factory Default Settings on page 48.
The following table shows the factory default settings.
Table 3. Factory default settings
Factory Settings
Smart Setup
WiFi
DHCP
Enabled
WiFi communication
Enabled
WiFi network name (SSID)
NETGEAR_EXT
Security
Disabled
Transmission speed
Auto1
Country/region
Varies by region
Operating mode
802.11ac, 802.11n, 802.11g, 802.11b
Data rate in the 2.4 GHz band
Up to 400 Mbps
Data rate in the 5 GHz band
Up to 867 Mbps
Client enabled
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.
Factory Settings and Technical Specifications
76
AC1200 WiFi Range Extender
Technical and Environmental Specifications
The following table shows the technical and environmental specifications.
Table 4. Technical specifications
Technical Specifications
Network protocol and
standards compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay, NAT
(many-to-one), VPN pass-through (IPSec, PPTP)
Power adapter
•
•
North America (input): 120V, 60 Hz
All regions (output): 12 VDC @ 2.5A 30W maximum
Physical specifications
•
•
Dimensions: 9.72 x 6.85 x 1.22 in (247 x 174 x 31 mm)
Weight: 0.67 lb (302 g)
Environmental
•
•
Operating temperature: 32° to 140°F (0° to 40°C)
Operating humidity: 90% maximum relative humidity, noncondensing
Interface
•
•
•
Local: 10BASE-T, 100BASE-TX, 1000BASE-TX, RJ-45
USB 3.0
802.11ac, 802.11n, 802.11a, 802.11g, 802.11b
Electromagnetic emissions
Meets requirements of FCC Part 15 Class B.
Factory Settings and Technical Specifications
77

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : NETGEAR
Create Date                     : 2016:03:14 14:40:28Z
Keywords                        : NETGEAR, AC1200, WiFi, Range, Extender, User, Manual;, EX6200
Modify Date                     : 2016:03:14 14:43:10-07:00
Subject                         : AC1200 WiFi Range Extender Model EX6200
Language                        : en
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/10/03-12:08:50
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : AC1200 WiFi Range Extender Model EX6200
Creator                         : NETGEAR
Description                     : AC1200 WiFi Range Extender Model EX6200
Creator Tool                    : FrameMaker 10.0.2
Metadata Date                   : 2016:03:14 14:43:10-07:00
Copyright                       : ? NETGEAR, Inc.
Document ID                     : uuid:849d2b68-483e-40f9-a133-867665c32c09
Instance ID                     : uuid:767d7833-ec38-481e-920c-e7ce0a92e3c1
Page Mode                       : UseOutlines
Page Count                      : 77

EXIF Metadata provided by EXIF.tools