Netgear orporated AC791L Mobile Hot Spot User Manual

Netgear Incorporated Mobile Hot Spot 07 Notification of Compliance June 4 2015 v18

a href="https://usermanual.wiki/Netgear-orporated" itemprop="url"> Netgear orporated >

Contents

07_Notification of Compliance_June_4_2015_v18

Notification of Compliance Regulatory Compliance Information This document includes user requirements for operating NETGEAR products in accordance with national laws including usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable national regulatory authority. The NETGEAR product firmware limits operation to only the channels allowed in a particular region or country. Therefore, all options described in this document may not be available in your version of the product. This document applies to both Class A and Class B devices:  Class A devices are intended to be used in a commercial or industrial environment. They are not intended to be used in a residential home or be available for general public use.  Class B devices are intended to be used in a residential setting, and may also be used in commercial and industrial applications. Examples of Class B devices are telephones, personal computers, and residential data gateways.  Fuses should only be installed by service personnel.  NETGEAR recommends the use of 26 AWG or larger gauge phone line cords. Europe – EU Declaration of Conformity This section applies to products bearing the CE or CE! mark: Products bearing the CE or CE! mark comply with the following EU directives:  EMC Directive 2004/108/EC  Low Voltage Directive 2006/95/EC  Ecodesign Directive 2009/125/EC  RoHS Directive 2011/65/EU If the product has telecommunications functionality, it also complies with the requirement of the following EU directive:  R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity. The EU CE Declaration of Conformity may be found at http://support.netgear.com/app/answers/detail/a_id/11621/. Caution for installing this equipment outdoors: (Valid in all EU member states, EFTA states, and Switzerland.) Be aware that outdoor installations require special attention and will only be handled by trained and qualified installation personnel. No one from the general public is permitted to install NETGEAR wireless products outdoors when external antennas, power and grounding must be installed for use. Particular attention has to be given allowed operational frequencies. Contact NETGEAR for instructions on how to contact an installer for outdoor operations if this product requires the special considerations for outdoor installations. For detailed information concerning installations in France, the user should contact the national spectrum authority in France (http://www.arcep.fr/ )
The following paragraphs apply to WN2500RP: This device is a 2.4GHz and 5GHz wideband transmission system (transceiver), intended for indoor use only in all EU member states, EFTA states, and Switzerland. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for applying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10mW EIRP in the frequency range of 2454-2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. The following paragraph applies to the LG2210: External antenna requirement: Net gain (antenna + cable) of external antenna is required to be less than 1.14dBi (minimum gain of internal antenna). Warning NETGEAR Class A products that may be utilized in domestic/residential environments may cause radio interference in which case the user may be required to take adequate measures. FCC Requirements for Operation in the United States Information in this section applies to products bearing the FCC mark (or statement): FCC Information to User This NETGEAR product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. The following statement applies to these products:  C6300  FS305v2  R6200v3  WNDR3400v3  C7000BMX  FS308v2  R6220  WNDR3700v5  D3600  FS605v4  R7500  WNDR4300v2  D3610  FS608v4  R8000  WNDR4500v3  D6000  GS205v2  STS7000  WNR2010  D6010  GS208v2  VEGN2200  WNR2020  D6200V2  GS305  VMB3000  WNR614  D7000  GS308v2  VMC3010  WNR618  EX2700  GS605v5  VMC3030  EX3700  GS608v4  WN370  EX6100  HMNC100  WN1000v4  EX6150  JNR1010v2  WN2500RP  EX6200  JR6150  WN3000RPv2  EX7000  JWNR2000v5  WN3500RP  FS205v2  JWNR2010v5  WNA1000Mv2  FS208v2  R6050  WNDA3100v3
Download:
Mirror Download [FCC.gov]
Document ID2668293
Application IDOowVKFFht8y4+zUZGUNAgQ==
Document Description07_Notification of Compliance_June_4_2015_v18
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize69.82kB (872749 bits)
Date Submitted2015-07-06 00:00:00
Date Available2016-01-04 00:00:00
Creation Date2015-06-04 13:44:48
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2015-06-25 11:58:26
Document Title07_Notification of Compliance_June_4_2015_v18
Document CreatorMicrosoft® Word 2013
Document Author: Lisa Pampuch
FCC ID Filing: PY3AC791L

Navigation menu