Netgear orporated WGT634U 108 Mbps Wireless Media Router User Manual

Netgear Incorporated 108 Mbps Wireless Media Router HR314 Qcard

a href="https://usermanual.wiki/Netgear-orporated" itemprop="url"> Netgear orporated >

Users Manual

Start HereFollow these instructions to set up your router.Verify That Basic Requirements Are Met Assure that the following requirements are met:• You have your broadband Internet service settings handy.• The networking settings of the computer are set to obtain an IP address automatically.For instructions on how to do this, please see the animated tutorials on the 108 MbpsWireless Media Router Resource CD for Windows®computers or the Reference Manualon the 108 Mbps Wireless Media Router Resource CD for Macintosh®computers.• For USB disk file sharing, you must have an approved USB storage device. See theReference Manual on the 108 Mbps Wireless Media Router Resource CD for a list ofapproved devices. First, Connect the Router to the Internet11Connect the Router Between Your PC & Modema. Turn off your computer and cable or DSL broadband modem.b. Disconnect the Ethernet cable (A)which connects from the Ethernetport of your computer to the cableor DSL broadband modem.c. Securely insert the Ethernet cable from your broadband modem into theInternet port (B) on the WGT634U.d. Securely insert one end of the Ethernet cable that came with your router into aLAN port on the router such as LAN port 4 (C), and the other end into theEthernet port of your computer (D).22Restart Your Network in the Correct SequenceWarning: Failure to restart your network in the correct sequence could prevent youfrom connecting to the Internet.a. First, turn on the cable or DSL modem and wait 2 minutes.b. Now, turn on your router by plugging in the power cord, and then wait 30 seconds. c. Last, turn on your computer. Note: If software usually logs you in to the Internet, do not run that software orcancel it if it starts automatically. d. Check the status lights and verify the following:• Power: The power light goes on when your turn the router on. • LAN: A LAN light on the router such as the one for LAN port 4 is lit. If noLAN lights are lit, check that the Ethernet cable connecting the powered oncomputer to the router is securely attached at both ends.• Internet: The Internet light on the router is lit. If the Internet light is not lit,check that the Ethernet cable is securely attached to the router Internet portand the powered on modem. 33Log in to the Routera. From your PC, launch a browser such as Internet Explorer or Netscape®Navigator.b. Connect to the router by typing http://192.168.1.1 in the address field. c. When prompted, enter admin for the router user name and password for therouter password, both in lower case letters.d. After logging in to the router, you will see the Internet Connection SetupWizard on the settings main page.Installation GuideBroadband modemBroadband modem108 Mbps Wireless Media Router WGT634UBroadband modem108 Mbps Wireless Media Router WGT634UPower Internet Port LAN Port 4ABInternet PortCLAN Port 4D
22Configure the Wireless Adapter SettingsUse the settings in step 1 to configure the wireless adapter of your computer. The settings of the computer and router must match exactly.33Verify Wireless ConnectivityVerify wireless connectivity by connecting to the Internet or by logging in to therouter. If you have problems with wireless connectivity, refer to the TroubleshootingTips below or to the Reference Manual on the 108 Mbps Wireless Media RouterResource CD.You are now wirelessly connected to the Internet! Set up wireless security accordingto the instructions in the Wireless chapter of the Reference Manual on the 108 MbpsWireless Media Router Resource CD.How Do I Set Up File and Photo Sharing?For information on how to set up the USB storage device for file/photo sharing andapproved USB drives, please refer to the Reference Manual on the 108 Mbps Wireless MediaRouter Resource CD.Note: Do not connect the USB storage device until prompted to do so by the File/PhotoSharing Wizard.Troubleshooting TipsHere are some tips for correcting simple problems that prevent you from connecting to theInternet or connecting to the router.Make sure the wireless settings in the computer and router match exactly •The Wireless Network Name (SSID), channel, and WEP settings of the router andwireless computer must match exactly.Be sure to restart your network in the correct sequence•Follow this sequence. Turn off the modem, router, and computer. Turn on the modemfirst and wait two minutes. Next turn on the router, and finally the computer.44Run the Setup Wizard to Connect to the Interneta. You are now connected to the router. If you do not see the menu above, clickthe Setup Wizard link on the upper left of the main menu.b. Click Nextto proceed. Follow the screen prompts and input your ISP settings, as needed.c. If prompted with the message that new software is available, click Yes to updateyour router with the latest software enhancements.d. At the end of the Setup Wizard, click the Test button to verify your Internetconnection and register your product. If you have trouble connecting to theInternet, use the Troubleshooting Tips below to correct basic problems, or referto the Reference Manual on the 108 Mbps Wireless Media Router Resource CD.You are now connected to the Internet!Now, Set Up Basic Wireless Connectivity11Configure the WGT634U Wireless SettingsClick Wireless Settings in the main menu.Select a Region. Leave the other settingsunchanged. Click Apply to save your changes.*201-10094-01*201-10094-01 February 2004©2004 NETGEAR, Inc. NETGEAR, the Netgear logo and Everybody's connecting are trademarks or registeredtrademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registeredtrademarks of Microsoft Corporation in the United States and/or other countries. Other brand and productnames are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved.Technical SupportPLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPEDWITH YOUR PRODUCT. By registering your product at www.NETGEAR.com/register, we can provide you withfaster expert technical support and timely notices of product and software upgrades.Attention: When you configure the wireless settings of this deviceplease make sure to select the correct country settings. Due to EU-law the country settings must be identical to the country, wherethe device is operating (important due to non-harmonized frequencies in the EU).802.11b Restrictions: European standards dictate maximum radiated transmit power of 100 mW EIRP and frequency range of 2.400 – 2.4835 GHz. In France, the equipment mustbe restricted to the 2.4465 – 2.4835 GHz frequency range and must be restricted to indoor use.!0560Make sure the Ethernet cables are securely plugged in •For each powered on computer connected to the router with a securely plugged inEthernet cable, the corresponding router LAN port status light will be lit. The labelon the bottom of the router identifies the number of each LAN port. •The Internet port status light on the router will be lit if the Ethernet cable from therouter to the modem is plugged in securely and the modem and router are turned on.Make sure the network settings are correct•LAN and wirelessly connected computers must be configured to obtain an IP addressautomatically via DHCP. For instructions on how to do this, please see the animatedtutorials on the 108 Mbps Wireless Media Router Resource CD or Appendix C in theReference Manual on the 108 Mbps Wireless Media Router Resource CD.•Some cable modem ISPs require you to set the router to use the MAC address of thecomputer registered on the account. If so, in the Basic Settings menu Router MACAddress section, select “Use this Computer’s MAC address.” The router will thencapture and use the MAC address of the computer that you are now using. You mustbe using the computer that is registered with the ISP. Click Apply to save your settings. Restart the network in the correct sequence.Wireless FeatureNetwork Name (SSID) NETGEARWEP Security DisabledDefault Setting
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  -•Reorient or relocate the receiving antenna. -•Increase the separation between the equipment and receiver. -•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -•Consult the dealer or an experienced radio/TV technician for help.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Download:
Mirror Download [FCC.gov]
Document ID398530
Application IDAXVQqFLfwOnOz9SGYWerMw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize24.6kB (307438 bits)
Date Submitted2004-02-24 00:00:00
Date Available2004-02-24 00:00:00
Creation Date2004-01-30 14:28:12
Producing SoftwareAcrobat Distiller 4.0 for Macintosh
Document Lastmod2004-02-18 09:20:58
Document TitleHR314 Qcard
Document CreatorQuarkXPress(tm) 4.11
Document Author: regina
FCC ID Filing: PY3WGT634U

Navigation menu