Novatron X14 HiFi-Audio User Manual X14 English ver1 1
Novatron Co., Ltd. HiFi-Audio X14 English ver1 1
Novatron >
Contents
- 1. User Manual_Part I
- 2. User Manual_Part II
User Manual_Part I
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4110644 |
| Application ID | 0v0/FTi9QkrmEtfH9fiApQ== |
| Document Description | User Manual_Part I |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 497.32kB (6216439 bits) |
| Date Submitted | 2018-12-19 00:00:00 |
| Date Available | 2018-12-19 00:00:00 |
| Creation Date | 2018-12-19 17:39:29 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2018-12-19 17:39:31 |
| Document Title | Microsoft Word - X14 User manual_English_ver1.1 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | jmkang |
Rev1.1
English
Gracenote® End User License Agreement
This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”). The
software from Gracenote (the “Gracenote Software”) enables this application to perform disc and/or file
identification and obtain music-related information, including name, artist, track, and title information (“Gracenote
Data”) from online servers or embedded databases (collectively, “Gracenote Servers”) and to perform other
functions. You may use Gracenote Data only by means of the intended End-User functions of this application or
device.
You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal
non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Software or any
Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED
HEREIN.
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote
Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all
use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in
Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no
circumstances will Gracenote become liable for any payment to you for any information that you provide. You
agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name.
The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly
assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who
you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service.
The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote makes no
representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the
Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data
categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or
Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be
uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or
categories that Gracenote may provide in the future and is free to discontinue its services at any time.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS
THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE
SERVER.
IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES.
© Gracenote, Inc. 2009
※ NOTICE
Gracenote service is only licensed for 2 years.
Can be extended for 1 year for 5EURO
NOTIFICATION of GNU General Public License
This product contains a software which, as a free software, is fully or partly subject to the terms of a license of the GNU
General Public License Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). Upon request
(nwkoh@novatron.co.kr), you will also receive the software's source code on a customary data storage device. In return, we
will claim the production costs of this storage device. You can find the complete license text subsequently.
You can learn more on http://www.gnu.org/licenses/gpl-2.0.html. Since this is a free software, the software developers
exclude the liability to the extent permitted by law. Please note that, naturally, the warranty for the hardware is not
affected by this and is fully in place. We gladly answer any of your questions at nwkoh@novatron.co.kr.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public
License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all
its users. This
General Public License applies to most of the Free Software Foundation's software and to any other program whose
authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You
can apply it to
your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses
are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if
you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in
new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that
forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of
such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure
that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy,
distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified by someone else and passed on,
we want its recipients to know that what they have is not the original, so that any problems introduced by others will not
reflect on the original
authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger
that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To
prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The
precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or
other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this
General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is
included without limitation in the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The
act of
running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work
based on the
Program (independent of having been made by running the Program). Whether that is true depends on what the Program
does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided
that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep
intact all the
notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy
of this License
along with the Program. You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of
these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and
the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any
part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for
such
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice
and a
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program
under
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on the Program is not required to print an
announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program,
and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not
apply to those
sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which
is a work based
on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees
extend to the
entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim
rights or contest
your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative
or
collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the
Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form
under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the
terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to
be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative
is
allowed only for noncommercial distribution and only if you received the program in object code or executable form with
such
an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making
modifications to it. For an executable work, complete source code means all the source code for all modules it contains,
plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
However, as a special exception, the source code distributed need not include anything that is normally distributed (in
either source or binary
form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable. If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent access to copy the source code from the same place
counts as distribution of the source code, even though third parties are not compelled to copy the source along with the
object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under
this License.
However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so
long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or
distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by
modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License
to do so, and
all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the
original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any
further
restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by
third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues),
conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not
excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations
under this
License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For
example, if a patent
license would not permit royalty-free redistribution of the Program byall those who receive copies directly or indirectly
through you, then
the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to
apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any
such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is
implemented by public license practices. Many people have made generous contributions to the wide range of software
distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she
is willing
to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the
original copyright holder who places the Program under this License may add an explicit geographical distribution
limitation excluding
those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License
incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and "any
later version", you have the option of following the terms and conditions either of that version or of any later version
published by the Free
Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software, which is copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally. NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND
CONDITIONS
How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and
change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of
each source file to most effectively
convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full
notice is found.
Copyright (C)
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License
as published by
the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also, add information on how to
contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision
version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type
`show w'.
This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The
hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course,
the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or
menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne,
Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by
James Hacker. , 1 April 1989 Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what
you want to do, use the GNU Lesser General Public License instead of this License.
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright © 2007 Free Software Foundation, Inc. It will ask for OSD language, Audio Ripping Format, Network Setup, Time setting, HDD
format.
【 TIP ① 】 You will be asked about formatting the HDD only if the HDD installed has NOT
been formatted.
3-2. Turn ON for normal use
Switch the unit on at the rear of the X14. Power it on using the remote control or the power
button on the top of the X14. The X14 should take about 30~40 seconds to boot up as it is
looking to see if a network is connected.
After the X14 is powered ON, the below screen will show up in sequence.
1) Booting image
2) Booting completed and ready for use
Music DB: Play loaded(ripped) music in
Browser : See all storages such as hard
X14 Music DB folder.
disk of X14, USB host and networked
CD Play/Rip: Load(rip) CD or play
storages.
Setup : Change settings
it(Optional Function)
Playlist: Make Playlist and play it.
i-Service: Play i-Radio or online music
services
Input: To select Input source
30
4. SETUP
Go into SETUP menu with remote controller.
You can select each item with the arrow key and confirm it
with the OK button.
4-1. Music DB
Select the Display Mode and confirm with the OK button.
4-1-1. Display Mode
You may set one of fourteen(14) options, see below. For example, if you set Title, the Music DB
will display the title (song) list when you go into the Music DB. (※ default: Album)
※ Default : Album
※ For example
Artist/Track : Artist list → Title(song) list
Artist/Album : Artist list → Album list of the artist → Track (song) list of the album
4-1-2. Album View
You can set the list to show albums in the Music DB by its album name (text) or album cover art
using this setup.( ※ default : text mode )
31
※ Artist view, Genre view, Composer view and Track view also are available.
4-1-3. Track Numbering
With the Track Numbering option at SETUP, you may decide
whether you allow the track number to be added at the front
of title for each track when you rip CD. (※ Default: Enabled)
4-1-4. Append Artist in Album View
If you want to add Artist name to Album name, you should
set this option as ON (※ Default: ON)
4-1-5. Storage for Music DB
You can select a HDD(SSD)1, USB or NAS(Network attached storage) for Music DB storage. If one
of them is selected as MusicDB storage, its color will be red.
※ Default is HDD1
[CAUTION]
※ NOTE: Please remember to check this setting first when you see ‘Query Error’ on the screen in
trying access to your music DB. For example, you will see ‘Query Error’ on the screen when you
try accessing your Music DB of internal (installed) HDD with Music DB storage set to USB.
32
※ When you use an external USB hard disk, please make sure to supply Power to the external
USB hard disk in case the external USB hard disk is designed originally to connect to a Power
supply.
4-1-6. Recovery
It is possible for damage or errors to occur on the album or files in the Music DB when you run
several functions like; ‘Rename, Delete, Copy to DB, or CD ripping’ etc. If there are errors in the
Music DB, the X14 may not play the files properly or may not rip CDs properly. The Music DB
Recovery function will help to clear these problems.
4-1-6-1. How to run Music DB Recovery function
① Go to the Music DB. ② Select Recovery and press the OK key.
※ It will take some time to start and finish if your Music DB is quite large.
4-1-6-2. Music DB Recovery run
After you run the Music DB Recovery, as shown above, you can see the results of the Recovery as
displayed below.
Go to Music DB of SETUP and select Recovery Result.
The left screen will appear if your Music DB is OK
The left screen will appear if something was dubious
※ ‘Moved’ means the song file moved to ‘Recovery’ folder.
※ ‘song file’ is actual file.
※ ‘Deleted’ means the info in the Music DB was deleted.
※ ‘Album’, ‘genre’, ‘artist’ and ‘song’ are just info(text file).
They are not actual music files.
33
4-1-6-3. To create ‘Recovery MM-DD hh-mm’ folder
automatically on HDD (or USB)
During Music DB Recovery run, the X14 creates a ‘Recovery MM-DD hh-mm’ folder automatically
on the internal HDD (or USB). The checked files or album folders will be stored (moved) there.
4-1-6-4. Importing files from the ‘Recovery’ folder to the Music
DB again.
After checking the files have moved to the ‘Recovery’ folder, you can import them to the Music
DB again with the ‘Copy to DB’ function.
4-1-6-5. To clear the list on Recovery Result
You can clear the list on the Recovery Result as follows:
① Place the cursor on the screen of the Recovery Result.
② Select the list you want to clear with the RIGHT key
③ Press the MENU key
④ You can clear all or the selected list only.
34
4-1-7. Backup
4-1-7-1 How to do Backup
X14 offers two backup methods. One is 'Background backup', the other is 'Interactive backup'.
※ Background backup: You can do other works like playing even in backup processing.
※ Interactive backup: You can't do anything in backup processing.
※You need an external USB hard disk drive which has a bigger capacity than the Music DB.
① Go to SETUP > MusicDB > Backup
② Confirm 'Backup' with OK key
③ Dialog window will show up like left picture.
"Do you want to backup by Background
Mode?
④ If you select and confirm 'Yes', next step for
'Background backup' will show up. But, if you
select and confirm 'No', next step for
'Interactive backup' will show up.
⑤ Select backup storage and confirm it with
OK key.
⑥ It will check space of the backup storage
⑦ Select OK and confirm it to start backup
⑧ 'MusicDB Backup : Started' message will
show up and disappear in about three(3)
seconds.
※ Now, you can go back by RETURN key for
other works!!!!
1) While backup in progress, if you do CD ripping or file importing to DB, these ripped files
and imported files will not be backed up.
2) While backup in progress, device response will be delayed slightly when try using other
function.
35
4-1-7-2 How to check backup progress and result
※ While backup in progress
① Go to SETUP > MusicDB > Backup
② Place the cursor on the 'backup'
③ Press MENU key
④ You can choose 'State of Progress' or 'Backup Result'
※ While no backup in progress
-. Step: Backup MusicDB
-. Total tracks: total track number of MusicDB
-. Current tracks: number of backed up tracks until now
-. Elapsed: total time passed until now
-. Estimated: total time to backup
4-1-7-3 How to stop backup
① Go to SETUP > MusicDB > Backup
② Place the cursor on the 'backup'
③ Press MENU key
④ You can choose 'Stop Backup'
36
4-1-8. Restore
You can restore the backup data in the Music DB of the X14.
① Connect the backup device to the USB host port of the X14.
② Go to the Music DB of SETUP and select Restore, and confirm it with the OK button.
③ You can see the backup device and select it, confirm using the OK key to start Restore.
4-1-9. MusicDB Integrity Check
This function will check any error in MusicDB. You can
select when this check will do. In shutdown or in Booting.
※ Default: In Shutdown.
※ As 'MusicDB Integrity Check' process will have effect
on booting time, we recommend to set it as 'In
Shutdown'
4-2. CD Ripping
NOTE: For CD Ripping, you need to buy an external USB Optical Disk Drive separately
because X14 manufacturer doesn’t provide the ODD. You can buy it easily from local
store or from online store like Amazon. And, many laptop users already have it.
Select CD Ripping and confirm it with the OK button. The below items will be displayed.
4-2-1. Bit Rate and Quality
You can select bit rate and the quality level for ripping to MP3 files.
There are two (2) items.(This is for ripping a CD to an MP3 file)
□ Compressed Rate : 128K / 192K / 320K
[default] 192K
□ Quality level : Excellent / Best / Good / Fast / Very fast
37
[default] Very fast
Select one of the above options and confirm with the OK button on the remote control.
【 TIP ① 】 The time required to rip a CD to MP3 format based on each quality level option is
shown below.
Option of quality level
Normal playing time
Required time to convert to MP3
X 1.5 (150%)
Excellent
Best
The time required to
X 1.08 (108%)
Good
play music in CD
X 1 (100%)
Fast
normally.
X 3/4 (75%)
Very fast[Default]
X 1/3 (33.3%)
※Quality level affects on the MP3 and Ogg ripping in view of sound quality, and on the FLAC
ripping in view of file size.
【 TIP ② 】 Estimated Storage capacity
CD Ripping option
500GB HDD
1 TB HDD
2 TB HDD
4 TB HDD
WAV(uncompressed)
650 CDs
1,300 CDs
2,600 CDs
5,200 CDs
128K
7,500 CDs
15,000 CDs
30,000 CDs
60,000 CDs
MP3 /
192K
5,000 CDs
10,000 CDs
20,000 CDs
40,000 CDs
OGG
320K
3,000 CDs
6,000 CDs
12,000 CDs
24,000 CDs
Compressed Rate
These figures may vary slightly according to the number of tracks on a CD
4-2-2. Audio Format (Audio Rip Format)
You can select one of the following audio formats for CD Ripping;
※ default is WAV
4-2-3. FreeDB TextCode
In the case that the FreeDB text is broken, you may try changing the FreeDB TextCode as shown
below.
38
4-2-4. FreeDB Install
You can install the FreeDB data to the storage of the X14 as a FreeDB data (DVD) is supplied by
the manufacturer. Once you install the FreeDB data to the X14 the inserted CD information
(metadata like title, album name, artist, etc) will be displayed on the X14 screen without network
connection.
To install the FreeDB data to the X14 hard disk, insert the FreeDB data DVD into the CD slot of
the X14 and go to SETUP and select FreeDB to install. You will see the CD, select and confirm with
the OK button.
The X14 will shut down and reboot to start installing the FreeDB data
automatically.
When using X14 with network(internet) connected, you don't need to FreeDB data
because it's useless when X14 is connected to network(internet)
4-2-5. FreeDB Update
You can get a FreeDB update from the Cocktail Audio website (www.cocktailaudio.com).
To update your copy the FreeDB load the file downloaded from www.cocktailaudio.com to a
memory stick and insert the memory stick into the USB host port of the X14. Navigate to SETUP
and select FreeDB Update. Press the OK button. You can see the USB memory and select it with
the OK button to find the FreeDB update file. Confirm with the OK button to begin the
installation.
4-2-6. FreeDB Delete
You can delete FreeDB data if you don't like it after
installing it into X14
39
4-2-7. Auto Rip
When ripping many CDs at one time, this function will be
useful. If Auto Rip is set as ON, X14 will rip CD by itself if
you insert CD, and eject CD by itself after finishing
ripping without pressing any key
※ Default: OFF
4-3. Audio
Select Audio and confirm it with the OK key
4-3-1. Player View
You can set one of the following; Cover & List, Music Info or List Only.
※ NOTE: Using INFO button of remote control, you
can change player view to Cover & List, Music Info or
List Only like below.
※ Default: Cover & List
[ Cover & List ]
[ Music info ]
40
[ List Only ]
4-3-2. Equalizer
You can set one of the following; Normal → Classical→ Live → Pop → Rock → Jazz → Dance
→ Vocal → Soft → Bass → Normal
① Select Equalizer and confirm it with OK key to open the
preset EQ list like below.
② Select one of 10 options
※ NOTE: Equalizer works in Speaker Out (inside amplifier) only.
※ NOTE: During playing, you can also change preset E.Q using EQ button.
4-3-3. Analog In Volume
You can control volume level
of Analog In
※ Default: 0
4-3-4. Analog Out Volume
You can set Analog Out
Volume as Variable or Fixed
※ Default: Variable
※ Fixed: X14 volume will be set
as 0dB (Max). You can’t control
volume with X14
4-3-5. Analog Out
Analog Out can be set as OFF
or ON
※ Default: ON
41
4-3-6. Recording Sample Rate
When recording, you can set Recording Sample Rate as one
of three (3) options like 48KHz, 96KHz, 192KHz.
※ NOTE: The higher sample rate, the more recording space is
needed.
※ Default: 48Khz
4-3-7. Digital Out Volume
※ Variable: You can control
volume for Digital Out with X14
※ Fixed: X14 volume will be set as
0dB (Max). You can’t control
volume for Digital Out with X14
※ Default: Variable
4-3-8. Digital Out
You can set one of three (3) options like 48KHz, 96KHz, 192KHz and Passthrough
1) 48Khz : Max 48KHz frequency
2) 96Khz : Max 96KHz frequency
3) 192Khz : Max 192KHz frequency
4) Passthrough : Send out as it is and Max 192Khz
※ Default: 96KHz
42
4-3-9. SPDIF
You can set as ON or OFF for
SPDIF digital output
※ Default: ON
4-3-10. Speaker Out
You can set as ON or OFF for
Speaker Out
※ Default: ON
4-3-11. Gapless Play
The X14 supports gapless playback function for MP3 files, WAV, FLAC and DSD files only.
※ Default: ON
【 TIP 】
※LAME-encoded MP3 files only supported
※The Gapless play function works properly on ‘Repeat All’ and ‘Normal’ modes only. For example
in ‘Shuffle’ mode Gapless play is not supported
4-3-12. Slide Show Effect
Six (6) options are available like All, Fade in & out,
Transition, Rotation, Flip and None.
※ NOTE: For detailed explanation, refer to 17-1. Photo Slide Show (Page 100)
43
4-3-13. Slide Show Time
You can set show time and effect time according to your taste.
※ Show time: The time required to show one photo
※ Effect time: The time required to transit one photo to other
photo
※NOTE: For detailed explanation, refer to 17-1. Photo Slide Show (Page 100)
4-4. Network
※ Make sure your Ethernet cable or a USB WiFi dongle is connected.
Select Network and press the OK button.
① Select Network and confirm with the OK button.
② Select Wired Setup or Wireless Setup and confirm it with
OK button.
【 TIP 】 To check network information, press Network Info.
4-4-1. Wired Setup
4-4-1-1. DHCP (Auto IP)
③ Select DHCP(Auto IP) and confirm with the OK button. There is
no need to enter any values.
④ Select OK and confirm with the OK button.
⑤ The screenshot shown on the left will be displayed if the
network is connected successfully.
44
4-4-1-2. Static IP
① Select Static IP and confirm with the OK button.
② Enter the values such as; IP Address, Subnet mask, etc.
③ Select OK and confirm with the OK button
④ The screen to the left will be shown if the network is
connected successfully.
4-4-2. Wireless Setup.
The X14 offers two kinds of method for wireless network connection
4-4-2-1 Open SSID
① Select ‘Wireless Setup’ and confirm with
OK key.
② Select ‘Scan Ap List’. All AP available will
be listed up.
③ Select proper AP and confirm with OK
key.
④ If the AP has a password, enter it and
select OK and confirm OK key.
The screen to the left will be shown if the
network is connected successfully.
※ With CAP/NUM key of remote control, you can toggle
number, capital, small alphabet or symbols for typing.
45
4-4-2-2 Hidden SSID
① Select 'Set AP Manually' to open the
window for AP name input like left.
② Input AP name and select OK and confirm
it.
⑤ The window for the password input will
show up. The follow procedure is same as
‘Open SSID’
4-4-2-3 WiFi Repeater Roaming function
In case that signal strength of the connected AP goes down -45db, the X14 will be
connected to the AP which has same SSID and better signal strength if it is detected
4-4-3. Network Info
Select Network Info and confirm with the OK key. You can
see the network information displayed as shown below.
4-4-4. Wireless Info
Select Wireless Info and confirm with the OK key. You can
check the Wireless LAN signal strength, see below screen
shot.
4-4-5. Wake ON LAN
If Wake ON LAN is set as ON,
X14 can be powered ON by a
signal from outside via
network.
※ Default: OFF
In case that Wake ON LAN is set as ON, X14 Power LED on the front will stay as Blue
even though you power it off by remote control or front power button. 수정요망
46
4-5. Network Service
Select Network Service and
confirm with the OK key. There
are several items like Samba
Server, Web Server, UPnP
Server and FTP Server and
Shareplay(Airplay)
4-5-1 Samba Server
If you would like to see the folders on the X14 hard disk through your network connected PC you
can set up the following:
① Select Samba Server and confirm with the OK key. Set Samba Server as ON, see below
※ default: OFF
② Select Samba Server and confirm with the OK button.
③ Select Host Name and Workgroup.
④ Enter host name and workgroup name and select OK and confirm with the OK button.
※ How to see the folders of the X14 hard disk on your PC screen (based on Window 7 )
① Click the ‘START’ icon on the left/bottom on your monitor.
② Select ‘Computer’ and click it.
③ You may see ‘Network’
④ Click ‘Network’, then you may see all servers (The X14 default host name is X14) connected to
local network.
⑤ Select ‘X14’ and click it.
⑥ You may see the two folders, LocalStorages and MusicDB.
※ WARNING: You must NOT access to the MusicDB folder related to database. If you delete
or edit something inside of the folder, it will make MusicDB serious trouble.
47
4-5-2 Network Sharing (Samba Client)
You can connect the X14 and the storage devices in the same network. If you want to stream the
file in remote devices and play it with the X14, you need to do ‘network sharing’ first as below.
1) How to add ‘shared folder’
① Go to Browser and click 'NET'
when network is enabled
② Click 'Add share' and the below
screen shows up
③ Click the Server (Workgroup＼Server), then you may get
workgroup and server as below.
※ For example, you selected
'WORKGROUP' and 'USER-PC'
Then, the picture below will show
up.
※ User Name default: guest
④ Place the cursor on the Share, and click it. Then the shared
folders will be displayed as below.
⑤ Select the folder that you want to add
⑥ For example, you select 'Music' folder. Then, the screen
below will show up to make 'Nick Name'. The very 'Nick
Name' will be listed on the X14 screen as networked folder.
⑦ You can change the nick name (Music) freely as you want.
※ Same nick name can’t be used.
⑧ Select OK and confirm it. The screen below will show up.
48
⑨ Now, you may select ‘Music’ folder and click it to play the
files in the shared folder.
2) How to edit and remove ‘shared folder’
① Place the cursor on any folder listed on the screen.
② Press MENU key to open popup menu as the picture on
the left. You may add or edit here.
3) Convenient method to input the user name that you input previously
Place the cursor on the User
Name and click it. Then, you may
see the user name that you input
previously
4-5-3 Web Server
With the Web Server function of the X14, you can enjoy the following functions:
Add album cover art to all albums stored (ripped) in the X14 Music DB through Internet.
Edit ID3-tag information of each song
Play and control the X14 through the WebInterface
Make playlists with songs stored in the Music DB of the X14
Refer to '4-5-3-2 How to start WebInterface' on page 51
4-5-3-1. How to enable Web Server
Select Web Server and confirm with the OK key. Set to ON as shown below
49
4-5-3-2. How to start WebInterface
The X14 WebInterface is available in two formats; one for PC (tablet PC also), the other is for
smart phones.
① You can get the IP address of your X14 from SETUP.
(SETUP / Network / Network Info)
② Type in the IP address (for example, 192.168.0.4) into
the address window in the web browser of the PC or
Smart phone, see below.
PC Screen
Smart Phone screen
50
Main Screen
Please click the items marked with quadrangle. Then, you may see various functions
4-5-4 UPnP Server
If you have a device (like a PC) which supports UPnP client protocol, you can play music stored in
the X14 Music DB through the UPnP device.
Default setting for UPnP Server is ON, see below.
51
4-5-5 FTP Server
Select FTP Server and confirm with the OK key. Set it to ON. User Name is fixed as Guest. Default
password is 0000. You may change password should you wish to.
【 TIP 】 You may use the FTP software like ‘File Zilla’. The character should be set as ‘UTF-8’.
※What you can do with FTP Server function?
After installing FTP software like ‘File Zilla’ onto your PC, you can copy, delete or move files or
folders between X14 hard disk and your PC hard disk.
4-5-6 Shareplay(Airplay)
You can set Airplay function
as OFF if needed
※Default: ON
4-6. Internet Service
X35 integrated Online Music Services into its software. So, you can play Qobuz, TIDAL, Deezer,
Napster with X14 directly if you subscribe for those services and put their user name and
password here properly.
52
4-7. System
① Select System and confirm
with the OK button.
4-7-1. OSD (On Screen Display) Language.
② Select OSD Language and confirm with the OK button.
Supported languages will be displayed.
③ Select your preferred language and confirm with the OK
button.
【 TIP ③ 】 Default is English.
4-7-2. Auto Play
Select Auto Play and confirm
with the OK button. You can
set it to ON or OFF.
※ Default : OFF
【 TIP 】 For detailed explanation of Auto Play function, refer to 18-15 Auto Play (Page 107)
4-7-3. Resume Play
When you boot up the X14, it will automatically resume playing the music in the Music DB,
Browser or i-Radio from where it was last stopped.
Select Resume Play and
confirm with the OK key.
Set it as ON as shown left.
※ Default is OFF
【 TIP 】
※This function does NOT work in the case that the ‘Alarm’ function or ‘Auto Play’ function is
enabled.
※Function priority : Alarm function ---- Auto Play function ----- Resume Play function
53
4-7-4. Play in Browser
1) Including Sub-Folder : All songs
in sub-folders also will be played.
2) Excluding Sub-Folder : Any
song in sub-folders will not be
played
You can play all files in multiple folders or in single folder.
※ Default: Excluding Sub-Folder
① Select folders with RIGHT arrow key.
② Press MENU key to open popup menu
③ Select 'Start Playing' to start playing.
⑤ All songs in the selected folder will be played
4-7-5. Factory Reset
To restore changed values of
setup, select Factory Reset and
confirm with the OK button.
When you boot up after Factory Reset, it will ask for Wizard Setup
4-7-6. HDD Sleep
You can make X14 HDD go to sleep mode by this setting. There are five (5) options like OFF, 10
Min, 20 Min, 30 Min and 1 Hour. During the selected time, if no access to HDD, the HDD goes
into sleep mode.
※ For the X14 to wake up from HDD sleep mode, it takes 3~4
seconds. During this time, the X14’s response to the input
signal from remote control will be delayed.
54
4-7-7. Format Storage
※ NOTE: HDD Format function of the X14 does not support multi-partitioning. If you would like
to make two (2) partitions on the HDD we recommend this is done using your computer.
※ NOTE: The X14 offers
the function to format
internal hard disk and
external USB devices also.
If you format HDD, all data in the HDD will be lost
The format procedure is
same for the both storages.
4-7-8. File System Fix
When you suspect there is some problem in the file system of storages like internal HDD or
connected USB storage, you can try this function to remove some error in file system of storages.
Select File System Fix and confirm with the OK key.
【 Caution 】 We recommend you NOT to run this function if the file system of the X14 hard disk
has no problems.
4-7-9. Brightness
You can control the brightness level of the LCD.
Select Brightness and confirm with the OK key. You can set the
brightness using the LEFT/RIGHT arrow key on the remote
control. ※ Default: 10
55
4-7-10. Alarm
You can set six (6) alarm settings on the X14.
① Go to Alarm at SETUP, and confirm it with OK key.
The following screen will appear.
② Select the line you require and press the OK button.
The following screen will appear.
※ NOTE: The time should be set minimum 10 minutes
later than current time.
③ Set time, cycle and sound source.
④ Set Snooze ON.
⑤ Select OK and confirm it with OK button.
① Selecting time with up/down button.
② Selecting cycle with OK button
③ Selecting sound source from Playlist or iRadio
(My Favorites)
④ Selecting snooze ON/OFF
※ NOTE: In case that Alarm is set, the below icon will show up on the playing screen.
※ NOTE
A : Alarm
2 : Two
D : Day
Alarm is set as ‘after 2 days from
now’.
4-7-11. Auto Shutdown
The X14 will be powered off automatically at the assigned time and date.
① Go to SETUP and select System.
② Select Auto Shutdown and confirm
with the OK key
③ Select from the list and confirm.
56
④ You can set the time on the X14
⑤ Once the time is set move cursor onto the OK icon
and confirm with the OK key.
※ NOTE: Use the arrow key (UP/Down) to change the values. Use the arrow key (left/right) to
move the cursor. Press the OK key to change ‘Repeat’. Use the arrow key (left/right) to set ON/OFF.
⑥ The left screen will show. Press the RETURN key to save
the setting and exit this setup.
※ NOTE: Auto shutdown does not work properly if you set
the shutdown time ‘within 3 minutes of the power
※NOTE: In case that Auto shutdown is set, the below icon will show up on the playing screen.
※NOTE
D : Auto Shutdown
3 : three
H : Hour
After 3 hours, X35 will shutdown
4-7-12. Scroll Speed
Long text is scrolling on the screen. You can set its speed like below.
※ Default: Level 3
4-7-13. List Line Count
The number of text lines displayed on the screen is selectable according to your taste like below.
※ Default: 11 lines
57
4-7-14. User Font
※ Various fonts are available in Windows PC (C:/Windows/Fonts). You can get one of them and
use it for X14 via this function.
① Copy preferred fonts file into USB memory stick or local hard disk of X14.
② go to SETUP > System > User Font: Confirm it with OK key to open menu window like
above
③ Select 'Get User Font' to look for the fonts files and load it.
※ To return to 'X14 original system font, select 'User System font' and confirm it with OK key.
4-7-15. ErP Regulation
According to CE Regulation (ErP/Energy Efficiency Regulation),
X14 will enter into Power Off mode or WOL mode automatically
after 20 minutes without any working or input signal. You can
set this function as ON or OFF
※ Default: OFF
4-8. Time
You can set time format and time via internet or by manual here.
4-8-1. Time Format
X14 displays the time while playing the internet radio.
Pressing the CLOCK key displays time.
X14 can display one of two ways, AM/PM or 24Hours. You
can select which here.
58
4-8-2. Time Set (Internet)
① Select Time Set (Internet) and confirm
it with the OK button. All the time options
will be displayed as below.
【 TIP 】 Make sure that the X14 is connected to network (internet) before you try time setting by
Time Set (Internet).
② Select your preferred time and confirm it with OK button.
【 TIP 】 Default: GMT+00 London
4-8-3. Time Set (Manually)
Without a network (internet) connection, you can set time manually.
① Select Time Set (Manual) as in the above picture and
confirm it with the OK button.
② Input your time manually and select OK to confirm it with
OK button.
4-9. Firmware
You can check the current firmware version of your X14 and install the updated new firmware.
Select Firmware and confirm with the OK key.
4-9-1. Current Version
You can check the current firmware
version as shown below. Select
Current Version and confirm with the
OK key.
59
4-9-2. Update manually (Firmware update manually)
① Obtain the new firmware first and put it onto the root directory
of USB memory stick or the HDD of the X14.
② Plug the USB memory stick into the USB host port of the X14.
③ Go to SETUP and select Firmware Update and confirm with the
OK key.
④ Select the storage device containing the new firmware.
⑤ Select xxxxxxxxxx.pkg file and confirm with the OK key
Select OK and confirm with the OK button. The X14 will reboot automatically to update the X14.
4-9-3. Update automatically (Automatic Firmware Update by network)
The X14 will automatically update the
firmware through the network. If you don’t
wish this done automatically you can
change the setting to OFF, see left.
※ Default: ON
4-9-4. What is Automatic Firmware Update by network?
This function is available only when X14 is connected to a network (internet). In the instance that
a higher version of the firmware exists at our server system, your X14 will check it automatically
when the X14 boots up.
※ NOTE: If CANCEL is selected, the folder [New Firmware] is
created automatically in the internal hard disk (or USB), then
the X14 will not ask for a Firmware Update when booting up. If
you delete [New Firmware] through Browser, it will ask again.
※ NOTE: There is no actual data in the [New Firmware] folder.
60
If OK is selected the X14 will try downloading and extracting it automatically.
The X14 will
reboot automatically to update the firmware, see sequence below:
4-9-5. Check now for new firmware
When you want to check if your X14 has the latest firmware
installed, please use this function. If there is higher version of
firmware in our server, the dialog window will show up when
you click this option.
4-10. Bluetooth
When you want to play files in your mobile devices which have
BT function(sender) via the X14, you can use X14 BT function
4-10-1. Pairing
① Go to SETUP > Bluetooth
② Open ‘Pairing’ menu
③ Register X14 to your BT device(phone)
④ Then, your device will be connected to
X14
⑤ You can play now
⑥ If you press BLUETOOTH key, you can
go to BT Now Playing screen
61
4-10-2. Bluetooth Device Name
Here, you can name your X14
with a nice name as you want
※ Default: cocktailAudio X14
4-11. License for Gracenote
4-11-1. Limited Gracenote service
X14 provides Gracenote service to retrieve CD metadata and Album cover art for CD Ripping.
※ NOTICE
But, Gracenote service is free for two (2) years. After two (2) years, if you want to keep using
Gracenote service, you need to pay five (5) EURO per service for one year.
Of course, if you don't like to Gracenote service with payment, CD metadata from freedb
server and album cover art from Google, Amazon, Bing, etc are available in the X14
4-11-2. How to activate license for Gracenote service
※ NOTICE
You need to taka a simple process to activate ‘Gracenote Service’ first like below.
① Go to SETUP>License.
② Click 'License', then below screen will show up
※ Two(2) services are available. One is CD metadata(Cd), the
other is Album coverart(Cover)
③ Click one of them. For example, click 'Gracenote(Cd)
62
There will be License Name and Device Key, which are
needed to activate license
④ Click 'Activate'
⑤ Click 'OK' to finalize 'license activating'
※ After two(2) years, you can take a similar process to buy
license
5. What is the CD Database (Music DB) of X14
The Music DB is a database of the music loaded (ripped or imported) to the X14 (onto the
storage). You can make X14 MusicDB via the functions of 'CD Ripping' and 'Importing to DB'. You
can edit the CD information of each track such as the title, album, artist, year and genre that are
stored in the Music DB. You can search any of your music easily by title, album, artist, year or
genre.
When the X14 is connected to the internet/network the CD information can be retrieved from the
CD metadata server provided by the company with which we contracted for that service.
6. CD Loading (Ripping)
NOTE: For CD Ripping, you need to buy an external USB Optical Disk Drive separately
because X14 manufacturer doesn’t provide the ODD. You can buy it easily from local
store or from online store like Amazon. And, many laptop users already have it.
All music that you load (rip) onto the X14 will be stored in hidden folder (the name of the folder
is .DB), that cannot be seen.
【 TIP ① 】 It is recommended that you connect to the internet to make use of the CD metadata
server when loading (ripping) CDs.
63
6-1. When the X14 is connected to network (Internet)
Make sure to connect X14 to network (Internet) before inserting CD into X14.
① Insert CD into X14, then all tracks will be listed on the screen.
【 TIP ② 】 If the X14 is connected to the Internet, but displays
the track lists instead of the actual music titles, eject the CD & reinsert it into the optical drive again.
② For CD loading (ripping), press the MENU button.
Then the below popup screen is displayed showing “Ripping All”.
6-1-1 Ripping All
This procedure is for loading (ripping) a whole CD.
③ Select Ripping All and press OK button.
Then the below screen is displayed.
④ Select one of five (6) options (WAV, ALAC, AIFF, MP3, OGG,
FLAC) and press OK button.
Then, the below screen is displayed.
The X14 retrieves each information (title, artist, etc) from the
CD metadata server
⑤ Press OK to start CD ripping
※ NOTE: In case that multiple CD metadata exist, you can select
other metadata for the CD with the NEXT icon, and click Album
cover art if you want to change album cover art
⑥ Now, it's ripping
64
6-1-2. Ripping Tracks
This procedure is for loading (ripping) individual tracks.
① Select Ripping Tracks and confirm with the OK button.
The below screen is displayed.
② Select the track(s) you want to load (rip) with RIGHT ARROW key, the selected tracks will
change to red. After finishing selecting, select OK and confirm with the OK button.
③ Select one of the 6 file type options and confirm with the
OK button.
From here, next procedures are same as the ‘Ripping All’
【 TIP ③ 】 When a CD is inserted into the optical drive, the X14 loads (rips) the CD to a WAV
format first, even if the MP3 option was chosen. The X14 then converts the WAV file into MP3
format afterwards in the background. The X14 continues to convert the files if it is turned on. The
X14 will pause the conversion process during ripping.
【 TIP ④ 】 Explanation of each item on the ripping screen.
① Title of track being ripped
② Number of tracks to be ripped/ total
no of tracks in CD.
③ Title of playing time
④ Total time for playing
⑤ Equivalent play time
⑥ Ripped time
65
6-1-3. Structure of ID3 Tag Edit Dialog Screen in CD Ripping
Mood
Tempo
This 'Next' key will show up in case that
metadata for this CD exists in CD metadata
company server with multiple numbers
6-1-4. How to merge all tracks of Multi-Album into one folder(one
album) when ripping multi-album CDs
For multi-album, you can rip all tracks of multi-albums into one folder(one album)
For example, you have Multi-Album, The world's Greatest
Ballads, which is composed of three(3) CDs. You already
ripped CD1
① Insert CD2 and try ripping procedure. You will meet Tag
Edit screen like left. Place the cursor on the Album name and
press OK
② Then, you will see 'Album Help' screen like left, and the
cursor will be placed on the album which has same 1st
alphabet as CD2's album name. This will help you to look for
the CD1 easily.
③ Place the cursor on the CD1 album and press OK.
66
④ Please select OK to change CD number to '2'
⑤ CD1's album name will be inserted into CD2's Tag Edit
screen like left. Confirm OK
⑥ Select OK and confirm it
6-1-5. How to merge all tracks of Multi-Album into one folder(one
album) after you already rip multi-album CDs to separate folders(albums)
For example, you have multi-album, The world's Greatest
Ballads, which is composed of three(3) CDs. You already
ripped them separately
① Completing CD ripping for all three CDs, go to MusicDB.
There will be three(3) albums like left picture.
CD1
67
CD2
CD3
② Place cursor on the CD2(2nd Album) and press MENU key
③ Confirm 'Album Edit' to open Tag Edit screen like below
picture.
④ Cursor will be on Album name like left picture. Press OK
key to open 'Album Help' screen like below.
⑤ Look for the Album of CD1 and select it with OK key
⑥ Left screen will show up to get CD number. Select OK and
confirm it.
⑦ Then, Tag Edit screen of CD2 will get proper Album name
and CD number like Left.
⑧ Select OK and confirm it.
⑨ CD2(2nd Album) was merged to CD1(1st Album. There
will be just two Albums(CD1 and CD3) like left screen.
※ For CD3(3rd Album), you may send it to the CD1(1st
Album) by the same procedure as above.
⑩ Finally, there will be only one Album like left. Click it.
There will be four folder like left. There will be all tracks in
the [All] folder(Album)
68
6-1-6. Automatic Ripping(Auto Rip) function
When you want to rip many CDs, this function will be helpful.
① Go to SETUP>CD Ripping> Set it as ON (※ Default: OFF)
② Insert CD into CD drive
③ X14 will start CD ripping and eject CD by itself after
finishing ripping without pressing any key
※ NOTICE
1) If CD ripping is not successful, X14 will show up 'error
message' and will wait for your confirmation.
2) After ripping, you don't like metadata or album cover art
missing, you can edit the album tag info and get new album
cover art through 'Album Edit' and 'Cover Art' functions
6-2. In the case that the X14 is NOT connected to a network (Internet).
① Insert CD into X14.
② Select CD Play/Rip icon and press OK.
Track list is displayed as in the screen below.
③ For loading (ripping), press MENU button.
The below screen “Ripping All” is displayed.
【 TIP 】 Without a network (Internet) connection, the inserted CD
will get metadata (tag info) if you installed FreeDB onto X14
storage. The FreeDB data CD is bundled in the X14 package.
6-2-1. Ripping All
This procedure is for loading (ripping) all the tracks on CD.
69
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c016 91.163616, 2018/10/29-16:58:49 Modify Date : 2018:12:19 17:39:31-08:00 Create Date : 2018:12:19 17:39:29-08:00 Metadata Date : 2018:12:19 17:39:31-08:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - X14 User manual_English_ver1.1 Creator : jmkang Document ID : uuid:0b8f6520-ccba-47af-8ee2-ea9a0fc066a7 Instance ID : uuid:37b4fa1d-a738-4bbe-a2d6-45e381cc0c1f Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 69 Author : jmkangEXIF Metadata provided by EXIF.tools