OPTOELECTRONICS OPN2002I Laser Data Collector User Manual
OPTOELECTRONICS Co., Ltd. Laser Data Collector
Contents
- 1. user manual
- 2. Users Manual
user manual
Master Specification Data Collector with Bluetooth Model No. OPN-2002i Manufacturing Specification No. XF1OPN2002 Issue No. Issue Date DOC_ID SS12003 Edition 1st 2012-8-1 Approved by Optoelectronics Co., Ltd. 4-12-17 Tsukagoshi Warabi-shi, Saitama 335-0002 Japan TEL +81-48-446-1183 FAX +81-48-446-1184 営業 営業管理 CS Q A/QC 照査 作成 OPN-2002i DOC ID:SS12003 Revision History DOC_ID 型 :SS12003 名 :OPN-2002i Edition Date Section 1st 2012-8-1 Description of Changes (Initial Issue) OPN-2002i Index DOC ID:SS12003 page 1. ABSTRACT ................................................................................................................................. 1 2. OVERVIEW................................................................................................................................. 1 3. BASIC SPECIFICATION ........................................................................................................... 2 4. DETAILED VIEW....................................................................................................................... 4 5. ELECTRICAL SPECIFICATIONS ............................................................................................ 5 5.1. USB.......................................................................................................................................... 5 5.2. Charging Cradle ...................................................................................................................... 5 6. INTERFACE ............................................................................................................................... 5 6.1. USB .......................................................................................................................................... 5 6.1.1. Connector....................................................................................................................................... 5 6.1.2. USB Interface Circuit...................................................................................................................... 5 6.2. Bluetooth.................................................................................................................................. 6 6.3. Serial Interface ........................................................................................................................ 6 6.3.1. Connector....................................................................................................................................... 6 6.3.2. Serial Interface Circuit.................................................................................................................... 6 7. OPTICAL SPECIFICATIONS.................................................................................................... 7 7.1. Laser Scanning Specification..................................................................................................7 7.2. Laser Scanning Specification..................................................................................................7 7.2.1. Laser Scanning Tilt......................................................................................................................... 7 7.2.2. Scanning Curvature ....................................................................................................................... 7 8. TECHNICAL SPECIFICATIONS.............................................................................................. 7 8.1. Print Contrast Signal .............................................................................................................. 8 8.2. Depth of Field and Resolution ................................................................................................ 8 8.3. Pitch, Skew, and Tilt ............................................................................................................... 9 8.4. Curvature............................................................................................................................... 11 9. ENVIRONMENTAL SPECIFICATIONS ................................................................................ 12 9.1. Temperature .......................................................................................................................... 12 9.2. Humidity................................................................................................................................ 12 9.3. Ambient Light Immunity ...................................................................................................... 12 9.4. Dust and Drip Proof .............................................................................................................. 12 9.5. Vibration Strength(without packing) ................................................................................... 13 9.6. Vibration Strength (in individual packing) .......................................................................... 13 Drop Impact Strength......................................................................................................................... 13 9.7. Drop Impact Strength ........................................................................................................... 13 9.8. Electrical Specifications ........................................................................................................ 13 10. REGULATORY COMPLIANCE............................................................................................... 14 10.1. Laser Safety ........................................................................................................................... 14 10.2. Product Safety ....................................................................................................................... 14 10.3. EMC ....................................................................................................................................... 14 10.4. Other ...................................................................................................................................... 15 11. ROHS......................................................................................................................................... 15 12. MTBF ........................................................................................................................................ 15 13. PRECAUTIONS........................................................................................................................ 15 13.1. 13.2. Precaution against Laser Light ............................................................................................ 15 Handling ................................................................................................................................ 15 OPN-2002i DOC ID:SS12003 13.3. Radio Low .............................................................................................................................. 16 13.4. Export Administration Regulations...................................................................................... 16 13.5. Bluetooth................................................................................................................................ 16 13.6. Frequency Band..................................................................................................................... 16 14. PRODUCT LABEL ................................................................................................................... 18 15. PACKAGING SPECIFICATIONS ........................................................................................... 19 15.1. Individual Packaging Specification ...................................................................................... 19 15.2. Collective Packaging Specification ....................................................................................... 20 16. WARRANTY.............................................................................................................................. 21 16.1. Warranty period..................................................................................................................... 21 16.2. Delivery.................................................................................................................................. 21 16.3. Repair Timeframe.................................................................................................................. 21 16.4. Maintenance Period............................................................................................................... 21 16.5. Other ...................................................................................................................................... 21 17. PHYSICAL FEATURES ........................................................................................................... 21 17.1. Dimensions ............................................................................................................................ 21 17.2. Weight .................................................................................................................................... 21 17.3. Mechanical Drawing.............................................................................................................. 22 18. SUPPORTED SYMBOLOGIES ............................................................................................... 23 18.1. 1D symbologies ...................................................................................................................... 23 OPN-2002i DOC ID:SS12003 1. Abstract This manual provides specifications for the OPN-2002i Laser Barcode Scanner. 2. Overview The OPN-2002i scanner enables data transmission of barcode using Bluetooth wireless thechnology. z The OPN-2002i is handy and simple data collector. Data transmission is performed via a USB or Bluetooth. z The OPN-2002i has SPP and HID profiles. z Power supply is 3.7V, 230mAh(typ.) and Lithium-ion polymer battery is used. z The power supply charging is done via a USB interface or charging cradle. z MFi license agreement approved by Apple Inc. OPN-2002i DOC ID:SS12003 3. Basic Specification Item Spedification Note Control Section Input Section Display section RTC CPU 32bit CISC/96MHz FROM 512Kbyte + 32KByte SRAM 96Kbyte FROM(ストレージ) 1Mbyte Key type 2 keys: Trigger, Function LED bi-colors(red and green) 2pcs, a blue LED Beeper Tone:variable variable Contents year, month, day, hour, minute and second Error ≤±90seconds per a month Bluetooth For user data frequency, Volume:3-level Frequency 2402MHz ~ 2480MHz Specification Bluetooth Ver2.1 I /F Communication 10m distance It may shorter depending on usage environments Output level Class 2 4dBm max. Profile SPP/HID USB ・Full-Speed 12Mbps ( HID/COM ) ・Hi-Power Bus-powered 対応 Serial interface 2contacts for cradle. Optical Section Light emitting device Red laser diode Wave length / output 650±10nm ≤1mW power Scan rate 100±20scan/sec JAN,EAN,UPC-A,UPC-E,NW-7 (Codabar), Supported Industrial 2 of 5,Interleaved 2 of 5, Symbologies Code 11,Code 39,Code 93,Code 128 等 at 25 deg. C Refer to Chapter18 for details 1D Symbologies Minimum Resolution Code 39 : 0.127mm PCS 0.9 Curvature Radius ≥ 15mm ( 8-digiet JAN) Radius ≥ 20mm ( 13-digit JAN) PCS 0.9 Scan Angle DOF(mm) Code 39 Minimum PCS Pitch:α≤ ±35° Skew:β≤ ±50°(Excluding dead zone) Tilt:γ≤ ±20° Resolution:0.127 60~100 Resolution:0.15 40~130 Resolution:0.25 40~220 Resolution:0.5 40~360 Resolution:1.0 50~570 PCS 0.9 PCS 0.9 With over 70% reflectivity of space and quiet zone. 0.45 OPN-2002i DOC ID:SS12003 Item Specification Main Battery Lithium-ion polymer battery 230mAh(typ.) Up-time 10hours or more Power Environmental Specification Range of Operation(Charging) Voltage Current consump Charging tion Tempera Operating ture Storage Operating Humidity Storage Ambient Fluorensc Light ent Immunity Sunlight: Vibration Drop Dust and drip proof When a barcode is scanned twice in 10 sec. at 25 deg. C 4.5 ~ 5.5 V <500mA 0 ~ 50 ℃ -20 ~ 60 ℃ 20%RH ~ 85%RH 20%RH ~ 85%RH No frost, no condensation. No frost, no condensation. 4,000 lx or less 80,000 lx or less Increase the frequency of vibration from 10 Hz to 100 Hz at an accelerated velocity of 19.6 m/s2 (2G) for 6 minutes each in X, Y and Z-direction. Repeated this test for 10 times. Drop 3 times, at each 6 faces (right, left, front, back and top), from a height of 120 cm onto a concrete surface. IP42 Item Specification Laser safety Safety standards Regulatory EMC JIS C 6802:2011 Class2 IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class Ⅱ EN60950-1:2005 IEC60950-1:2006 EN55022 EN55024 FCC Part 15 Subpart C , Subpart B ClassB VCCI ClassB Product safety CE Marking Other Bluetooth logo certification MFi License program Immunity test ESD immunit Note No destruction 10kV (Air) No malfunctio 8kV (Air) Note For residential, commercial and light-industrial environments Condition: IEC61000-4-6 compliant Physical Features Dimensions 62.0(D) × 32.0(W) × 17.0(H) (mm) Weight Approx. 28g Excluding the accessories OPN-2002i DOC ID:SS12003 4. Detailed View Figure 1:Detailed View No. Description Name Scanning Window Scanning Window Trigger Key LED Buzzer Hole Strap Hole Function Key Contact Laser light is emitted through this window to read bar codes. The laser light is emitted through this window. A trigger key used to read bar codes A function key that can be configured with application Indicator of operating status, such as bar code reading and warnings Sound from a built-in buzzer comes out through these holes. A hole to attach a hand strap The contact is for charge and communication. OPN-2002i DOC ID:SS12003 5. Electrical Specifications 5.1. USB ・Voltage ・Bus-Power Class ・Current consumption : 4.5-5.5V : Hi-Power ( 500mA max ) : <500mA 5.2. Charging Cradle : 4.5-5.5V ・Voltage 6. Interface The OPN-2002i supports USB, Bluetooth and serial interfaces. 6.1. USB This interface supported FULL Speed USB. 6.1.1. Connector Signal VCC Data(-) Data(+) ( NC ) GND Pin No. ...... ...... Figure 2 : MINI USB B Connector 6.1.2. USB Interface Circuit USB connector 3 Data(+) Microcontroller +5.0V Power Figure 3:USBInterface Circuit Data(-) VCC 45 GND OPN-2002i DOC ID:SS12003 6.2. Bluetooth The OPN-2002i supported Bluetooth. Frequency : 2402MHz ~ 2480MHz Specification : Bluetooth Ver2.1 Communication distance Output level Supported profiles : 10m : Class 2 (4dBm Max.) : SPP/HID Topology of connection : Point-to-point Operating mode : Master or Slave mode Security mode : Enabled Encryption : Enabled 6.3. Serial Interface 6.3.1. Connector Signal VCC RXD TXD GND Pin No. Figure 4 : Serial Interface Connector 6.3.2. Serial Interface Circuit USB connector 3 TXD Microcontroller +5.0V Power RXD VCC GND Figure 5: Serial Interface Cirtuit OPN-2002i DOC ID:SS12003 7. Optical Specifications 7.1. Laser Scanning Specification Item Specification Light-emitting device Emission Wave length Output power Scan Method Scan Rate Scan Scan Angle Angle Effective Scan Angle Unit Red laser diode 650±10 (25 deg.C) <1.0 Bi-directional 100±20 54±5 44 (min.) nm mW Scan/Sec Deg Deg 7.2. Laser Scanning Specification Laser Scanning Tilt Laser scanning tilt is the vertical difference between both ends of a laser scan line. Measure it in the middle of the laser scan line. • Up to 1.2 degrees angle in vertical direction from the scan origin (mirror motor). • Up to 3.1 mm at 150 mm from the scan origin. 7.2.1. Scanning Curvature 7.2.2. The maximum difference between the laser scan line and the line between both ends of the laser scan line. Measure it in the middle of the laser scan line. • Up to 1.27 degrees angle in vertical direction from the scan origin (mirror motor). • Up to 3.3 mm at 150 mm from the scan origin. Curvatu Tilt re Horizontal Line Figure 6 : Laser Scanning Tilt and Curvature 8. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each sectionAmbient Temperature and Humidity Room temperature, room humidity Ambient Light 500 ~ 900 lx (excluding high-frequency lighting) Background Black Reading Test Accept the performance with 10 consecutive successes in reading. Each reading should be done in 0.5 seconds or less. OPN-2002i DOC ID:SS12003 8.1. Print Contrast Signal PSC 0.45 or higher (70% or higher reflectivity of space and quiet zone) PCS = Reflectance of white bar-Reflectance of black bar Reflectance of white bar * Be sure to keep the optical window clean without dirt or scratches, or it may have a bad effect on the reading characteristics. 8.2. Depth of Field and Resolution Distance in this drawing is measured from the front edge of the scanner. Figure 7: Depth of Field Resolution 1.0mm 0.5mm 0.25mm 0.15mm 0.127mm Depth of Field(mm) 60 ~ 570 40 ~ 360 40 ~ 220 40 ~ 130 50 ~ 100 Symbology Code 39 Code 39 Code 39 Code 39 Code 39 PCS 0.9 0.9 0.9 0.9 0.9 Bar Code Sample: Optoelectronics Test Chart, N/W ratio = 1:2.5 Angle : α = 0° β = 15° γ = 0° Curvature :R=∞ Quiet Zone 25mm 18mm 10mm 7mm 5mm Digits 1桁 3桁 8桁 10 桁 4桁 OPN-2002i DOC ID:SS12003 8.3. Pitch, Skew, and Tilt Pitch Skew Dead Zone Tilt :γ : α ≦ ±30° : β ≦ ±50° (Excluding dead zone) : β ≦ ±8 ° (Decoding may fail in some areas as a result of specular reflection) ≦ ±20° Bar Code Sample Distance Angle Curvature Optoelectronics Test Sample PCS 0.9, Resolution 0.25 mm, 9-digit Code 39, Quiet Zone 10 mm, N/W Ratio = 1 : 2.5 PCS 0.9, Resolution 0.26 mm, JAN-13, Quiet Zone 10 mm 100 mm from the edge of the scan engine Pitch angle : β = +15°, γ = 0° Tilt angle : α = 0°, β = +15° Skew angle / Dead zone: α = 0°, γ = 0° R=∞ OPN-2002i DOC ID:SS12003 Figure 8: Pitch Angle Figure 9: Skew Angle Figure 10: Tilt Angle 10 OPN-2002i DOC ID:SS12003 8.4. Curvature 8-digit JAN 13-digit JAN Bar Code Sample Distance Angle Curvature : R ≧ 15 mm : R ≧ 20 mm Optoelectronics Test Sample PCS 0.9, Resolution 0.26 mm, JAN-13, Quiet Zone 10 mm 100 mm from the edge of the scan engine Skew angle β = +15° R=∞ Figure 11 : Curvature 11 OPN-2002i DOC ID:SS12003 9. Environmental Specifications 9.1. Temperature Operating Strage : 0 ~ 50 ℃ : -20 ~ 60 ℃ 9.2. Humidity Operating Strage : 20 ~ 85%RH(no condensation, no frost) : 20 ~ 85%RH(no condensation, no frost) 9.3. Ambient Light Immunity Scanning performance is guaranteed when the range of illumination on a barcode surface is the following values. Incandescent light : 0 ~ 4,000 lx Fluorescent light : 0 ~ 4,000 lx Sunlight : 0 ~ 80,000 lx Barcode Test Sample Distance Angles Curvature Power Voltage OPTOELECTRONICS test chart Resolution 0.254 mm PDF417 specified in Chapter 7 89 mm from the front edge of the scanner. Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0° R=∞ 3.7 V * Be sure that the direct light or specular reflection from the light source does not enter the light receiving section of the OPN-2002i. 9.4. Dust and Drip Proof IEC IP42 equivalent Protection against solid objects: Level 4 Protected against solid objects greater than 1.0 mm Protection against liquids: Level 2 (JIS IPX2) Protected against dripping water from the vertical when tilted up to 15° 12 OPN-2002i DOC ID:SS12003 9.5. Vibration Strength(without packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in the non-operating state. Repeat this in each X, Y and Z direction. 9.6. Vibration Strength (in individual packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in individually packaged state. Repeat this in each X, Y and Z direction. Drop Impact Strength There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner three times (18 times in total), at each 6 face, from a height of 120cm onto a concrete floor as shown below. 120cm コンクリート Figure 12: Drop test 9.7. Drop Impact Strength (in individual packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges, and 6 faces, from a height of 150 cm onto a concrete floor. 9.8. Electrical Specifications Air discharge Measurement environment Discharge resistance Charging capacitor ±8 kV max. (No malfunction) ±10 kV max. (No destruction) An electrostatic testing device compliant with IEC 61000-4-2 is used. 330 Ω 150 pF 13 OPN-2002i DOC ID:SS12003 10. Regulatory Compliance 10.1. Laser Safety JIS C 6802:2011 Class 2 IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class Ⅱ 10.2. Product Safety EN60950-1:2005 IEC60950-1:2006 10.3. EMC EN55022 EN55024 FCC Part 15 Subpart C , Subpart B ClassB Federal Communications Commission Notices This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Harmful Interference Notice This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance Changes or modifications to this equipment that have not been approved by Ruckus Wireless may void the user's authority to operate this equipment. RF Exposure The OPN-2002n unit (FCC ID: UFOOPN2002I) complies with FCC radiation exposure limits set forth for uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. The unit has very low level of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR). 14 OPN-2002i DOC ID:SS12003 VCCI Class B This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. 10.4. Other Bluetooth logo certification MFi License Program The OPN-2002i uses Bluetooth module which qualifies as radio equipment for low-power radio stations as specified in the Radio Law 38-24-1. Specified Radio Equipment: Low power data communications system in the 2.4GHz band in Article 2 paragraph 1 item (19), Ordinance of MPT. Model type of Bluetooth module:OPA-26X1 Number of certification: 201-125603 11. RoHS The OPN-2002i is compliant with RoHS. RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95/EC 12. MTBF MTBF (Mean Time Between Failures) 10,000 hours 13. Precautions 13.1. Precaution against Laser Light *Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Caution - Do not stare into the laser light from a scanning window. It may harm your eyes. Do not point the laser directly at others’ eyes. It may harm your eyes. Do not stare into the beam with optical instruments. It may harm your eyes. 13.2. Handling Handle this product carefully. Do not deliberately subject it to any of the following: (1) Shock: • Do not drop this product from a height greater than specified in this manual. • Do not place this product under or between any heavy items. • Do not swing this product around holding the hand strap. (2) Temperature Conditions: • Do not use this product at temperatures outside the specified range. • Do not pour boiling water on this product. • Do not throw this product into a fire. (3) Foreign Materials: 15 OPN-2002i DOC ID:SS12003 • Do not immerse this product in water or other liquid. • Do not expose this product to chemicals. (4) Others • Do not disassemble this product. • Do not use this product near a radio or a TV. It may cause reception problems. • This product may be affected by a momentary voltage drop caused by lightning. • This product may not perform properly in a place where it will be subjected to a flickering light, such as a CRT (computer monitor, television, etc.). 13.3. Radio Low The OPN-2002i uses Bluetooth module which qualifies as radio equipment for low-power radio stations (2.4 GHz band advanced data communication systems) as specified in the Radio Law 38-24-1. Therefore it does not need to have a radio station license in Japan. The following activities are prohibited under the Radio Law: ・ Remodeling and disassembly ・ Peeling off the certificate label Do NOT use the scanner under the following environment, as radio interference may affect other device and end up with causing physical or material damage. ・ Safety apparatus and medical device for human body protection ・ Environment where is concerned to cause serious damage 13.4. Export Administration Regulations This product is subject to the strategically controlled exports regulated under “Foreign Exchange and Foreign Trade Laws”. Therefore, export of this product may require an export permission of Japanese government. 13.5. Bluetooth To communicate via Bluetooth, the device which OPN-2002i is connected to must support the same Bluetooth version and profile as OPN-2002i’s. ・ OPN-2002i is compliant to Bluetooth standards. However, we cannot assure the connection between OPN-2002i and other Bluetooth devices which have not been tested. ・ Bluetooth supporting devices use 2.4 GHz frequency band. However, many other sorts of devices also utilize this frequency band. It may have an effect on the communication speed or communication range of this data collector. ・ The use of OPN-2002i outside of the European Union, the United States and Canada is punishable under the law. ・ Communication speed and communication range of OPN-2002i may differ due to the obstacles and radio wave conditions between OPN-2002i and the device, which OPN-2002i is connected to. ・ Conditions of the device, which OPN-2002i is connected to, may also affect the communication speed and communication range of OPN-2002i. 13.6. Frequency Band The frequency band 2.4 GHz is utilized by this product. Read carefully the followings before using this product. In the frequency band of this product, scientific, medical and industrial devices including microwaves are used. Also other radio stations including local private radio station for mobile object identification requiring 16 OPN-2002i DOC ID:SS12003 license for such as manufacturing lines at factories, specific power-saving radio station requiring no license and amateur radio station are managed. 1. Please make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before using this product. 2. In case that radio interference occurs between this product and “other radio stations,” change the service space immediately, or stop transmitting radio wave to avoid the interference. 3. If you have any questions or troubles, please contact our sales office. * This specification manual is subject to change without prior notice. 17 OPN-2002i DOC ID:SS12003 14. Product Label The labels shown below are attached to the back side of the data collector. Figure 13: Product & Laser Caution Label 18 OPN-2002i DOC ID:SS12003 15. Packaging Specifications 15.1. Individual Packaging Specification Assembled package size: 125 x 112 x 40 (WDH mm) AIR PACKING OPN10018003-0-01 Poly bag No.3(0.03×80×150) Neck strap OPN10019106-0-02 テープで止める Mini USB cable(ベージュ) G9904B099-002 BOX No.OPN20018001-0-00 シリアルNo. の 表 示 に つ い て 『 123456 』 123456= 製 品シリアルNo. 6桁のシリアルNo.を表 示 【原産国表示】~country of origin~ 中国生産(produced in China)=MADE IN CHINA 日本生産(produced in Japan)=MADE IN JAPAN 【国内向】 個装箱バーコードラベル (3A0002) Model No. MADE IN ▲ ▲ ▲▲ ▲ MODEL NEME OPN-2002i-BLK Spec No. *XF5OPN2002* *バーコード* Item No. *-* *折り目にバーコードがかからない事 Serial No. * △ △ △ △ △ △* Figure 14: Individual Packaging 19 Quantity Ro OPN-2002i DOC ID:SS12003 15.2. Collective Packaging Specification Assembled package size: 595 x 520 x 245 (WDH mm), 100 pieces/box シリアルNo.の順序 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ Carton Box(5B0008 )100台入り ⑯ ① ⑥ ⑪ ⑰ ⑱ ② ⑦ ⑫ ⑭ ⑲ ⑳ 10 15 20 25 30 35 40 45 50 ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱ ⑲ ⑳ 51~ 55 56~ 60 61~ 65 66~ 70 71~ 75 76~ 80 81~ 85 86~ 90 91~ 95 96~100 ③ ⑧ ⑬ 1~ 6~ 11~ 16~ 21~ 26~ 31~ 36~ 41~ 46~ ④ ⑨ ⑮ ⑩ ⑤ 5段 入 り B: 【 国内向】 Missin g Se rial Numbe rラベル A :【 国内向】 外装箱ハ ゙ーコードラベル 欠品が3 つ以上の場合にのみ貼付する Aラベル と並べ正面と背面の2ヶ所に貼付(面の中央付近) 正面と背面の2ヶ所に貼付(面の中央付近) (3C0007) (3C0006) C/No. △△ C/No. △△ MADE IN ▲ ▲ ▲ ▲ ▲ MADE IN ▲ ▲▲ ▲ ▲ OPN-2002i-BLK Product PO# Missing Serial Number Missing Q'ty △△ * △△ △ △ - △ △ * Spec# Item# *XF5OPN2002* *-* バーコード △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ * △△ * S/N(from) *000001* S/N(to) *000 ▲▲ ▲ * Missing Serial Number Missing Q'ty △ 10 * △ △ △△ △△ * 11 * △ △ △△ △△ * 12 ROM-Ver.(MAIN) TC01J** ROM-Ver.(Bluetooht) Shipping Date △ △ △ △ △ △ △ △ / △△ Q'ty TD01J** 20△ △/ △ △/△ △ Ro OPTOELECTRONICS CO.,LTD. OPTOELECTRONICS CO.,LTD. 【原産国表示】~country of origin~ 中国生産(produced in China)=MADE IN CHINA 日本生産(produced in Japan)=MADE IN JAPAN Figure 15: Collective Packaging 20 OPN-2002i DOC ID:SS12003 16. Warranty 16.1. Warranty period OPTOELECTRONICS Co., Ltd. warrants that this product is free of defects or malfunctions for a period of twelve (12) months from its shipment. In case of having defects or malfunctions caused by normal usage in accordance with this specification during the foregoing warranty period, OPTOELECTRONICS shall repair or adjust the product free of charge. Any repair or replacement of the product after the foregoing warranty period shall be charged at regular repair rates. If defects or malfunctions were caused by customer mishandling, product repairs or replacement will be charged at regular repair rates, even during the foregoing warranty period. 16.2. Delivery Products for maintenance or repair shall be sent back to OPTOELECTRONICS. The sender is responsible for all shipping costs. 16.3. Repair Timeframe Repaired products shall be shipped back to the customer within 20 days after acceptance by OPTOELECTRONICS. Expedited repairs may be available, subject to terms agreed to by OPTOELECTRONICS and the customer. 16.4. Maintenance Period The maintenance period of this product is 5 years after its shipment. OPTOELECTRONICS may discontinue maintenance for this product during the 5-year maintenance period if a satisfactory replacement product or maintenance solution is agreed to. 16.5. Other Any additional warranty issues must be discussed with OPTOELECTRONICS on a case-by-case basis. 17. Physical Features 17.1. Dimensions 62.0(D) × 32.0(W) × 17.0(H) (mm) 17.2. Weight Approx. 28g (Excluding the accessories) 21 OPN-2002i DOC ID:SS12003 17.3. Mechanical Drawing Figure 16: Mechanical Drawing 22 OPN-2002i DOC ID:SS12003 18. Supported Symbologies 18.1. 1D symbologies Symbology JAN13 digits JAN13 digits + ADDON2 digits JAN13 digits + ADDON5 digits JAN8 digits JAN8 digits + ADDON2 digits JAN8 digits + ADDON5 digits EAN13 digits EAN13 digits + ADDON2 digits EAN13 digits + ADDON5 digits EAN8 digits EAN8 digits + ADDON2 digits EAN8 digits + ADDON5 digits Instore Code 13 digits Instore Code 8 digits UPC-A UPC-A+ADDON2 digits UPC-A+ADDON5 digits UPC-E UPC-E+ADDON2 digits UPC-E+ADDON5 digits UPC-E1 UPC-E1+ADDON2 digits UPC-E1+ADDON5 digits Code 39 NW-7 (Codabar) Industrial 2 of 5 Symbology Interleaved 2 of 5 Code 93 Code 128 MSI/Plessey IATA UK/Plessey Telepen Matrix 2 of 5 ChinesePostMatrix 2 of 5 NW-7 ABC Code NW-7 CX Code S-Code Tri/Optic Code 39 Full Ascii Code 39 It.Pharmaceutical EAN 128 RSS-14 RSS Limited RSS Expanded PDF417 MicroPDF417 Code 11 Korean Post 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2012:10:10 11:50:42+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2012:10:23 15:55:08+08:00 Metadata Date : 2012:10:23 15:55:08+08:00 Format : application/pdf Title : Microsoft Word - SS12003_OPN-2002i_初版_ENG.doc Creator : skonno0287 Document ID : uuid:9a273da0-e084-41f8-bde1-88e6c6c6a2c5 Instance ID : uuid:3023d2a5-949e-4a93-8370-548ff3be632a Page Count : 27 Author : skonno0287EXIF Metadata provided by EXIF.tools