Ohsung Electronics URCMX-900 RF REMOTE CONTROLLER User Manual User s Manual I

Ohsung Electronics Co., Ltd. RF REMOTE CONTROLLER User s Manual I

Contents

Users Manual

Order Number : GETEC-C1-09-179 FCC Part 15 subpart C Test Report Number : GETEC-E3-09-091 Page 1 / 1 EUT Type: RF Remote Controller FCC ID.: OZ5URCMX-900 APPENDIX I : USER’S MANUAL
Operating Your SystemWith The Genesis MX-900
This remote control was Custom Programmed for you by:For questions about your Custom Programming call:Custom Programming of a complex home theater and/or a multi-roomsystem is one of the most challenging tasks within an audio/video instal-lation. It involves an intimate knowledge of how the components interactand exact details on the proper sequences of control. Only a Complete Control dealer has the requisite experience and trainingto quickly and effectively customize a remote control for true automatedoperation.Congratulations on your choice! MX-900 Owners Manual © 2006 Universal Remote Control, Inc.Front Cover Photo courtesy of Robert Ridenour of Connected Technologies, www.connected-technologies.comThe information in this manual is copyright protected. No part of this manual maybe copied or reproduced in any form without prior written consent from UniversalRemote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. Complete Control is a registered trademark of Universal Remote Control, Inc.Entertainment Made Simple is a trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of theirrespective companies or organizations.Universal Remote Control, Inc.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 Universal Remote Control®
TABLE OFCONTENTSIntroduction 1The LIGHT Button 1Optional RF “No Rules” Operation 2Installing Batteries 3Programming the Genesis 4Selecting a New “Activity” 5Using the Genesis to Control an “Activity” 6Displaying the Setup Screen 7Selecting from the Setup Screen 7Setting the LCD 8Sound Volume 10Light Settings 10System Settings 11Version Information Displays 11Warranty 12Specifications 12Information To The User 13Warning 13
GENESIS OWNERS MANUALCongratulations!You’ve purchased a unique synthesis of hardware and software engineering,the Complete Control Genesis. The Genesis achieves a magnificent combina-tion of power and flexibility, simplifying and automating operation of even themost complex system.One Touch Blue BacklightingSimply press the LIGHT button to backlight the screen. Integrated Sound SignalingThe Genesis incorporates a small speaker for beeps. Anytime you press abutton, the Genesis signals that it has understood your command with abeep sound.Custom Labeled Buttons The Genesis is equipped with a bright easy to read LCD screen whichlabels the six buttons to the right of the screeen. These button labelschange based on what you are watching or listening to. Thus, if you haveselected Watching TV, you will see a list of buttons that are useful to thatactivity, while if you select DVD, the buttons will control the DVD.LIGHT ButtonPress the Light button on theside of the Genesis to backlightthe LCD display and all of thebuttons.Page 1
Page 2GENESIS OWNERS MANUALOptional RF “No Rules” OperationIn combination with a Complete Control RF Base Station, the Genesis cancontrol your system without being in line-of-sight of the equipment. 3.The MRF-300’s built-in Front Blaster sends commands tocomponents in the same cabinet space as the MRF-300.4. Self-adhesive “Flashers”affix to theInfrared sensors on the front panels of yourcomponents.The Flashers relay commandsto components out of sight of the MRF-300’s Front Blaster.The flashers plug in tothe MRF-300’s rear flasher line outputs viatheir 10 foot cables. Uniquely, the MRF-300can also connect to rear panel IR Inputs viaits adjustable IR Line Outputs.2.The RFX-150 RF Sensor can be freelypositioned for optimal reception.Either the MRF-300 or the MRF-250 RF base station is compatible with theGenesis. Both incorporate RF addressing. RF Addressing gives you the ability tocontrol equipment locations throughout your home, even if they are concealedin other rooms or are behind closed doors.1.The Genesis sends radio wavesin every direction, so you don’thave to point the remote any-more!
Installing BatteriesOpen the battery cover by pressingthe release and pulling back thecover on the back of the control.Remove the cover.Observe the + and - polarity indications inside the battery compartment.Place the four AAA batteries intotheir positions in the battery com-partment observing the + and -polarity indicators on the batteries. Now, replace the battery cover byinserting the hinged end in first,then snapping the cover back intoplace.Page 3GENESIS OWNERS MANUAL++--
Programming the GenesisThe Genesis is programmed via a Windows PC equipped with a USB port(programming cable included), using our proprietary software, MX-900Editor. You can download this software from our website:www.universalremote.comBasic setup takes only a few minutes with this software. However, to fullyautomate an audio/video system the user must have a detailed knowledgeof each component, you the user (and your preferences) and how thesystem is connected and operated. We highly recommend that you use aprofessional audio/video installer to program your Genesis so you will beable to enjoy all the benefits of the Genesis as well as one touch operationvia macros. Page 4GENESIS OWNERS MANUAL
Page 5GENESIS OWNERS MANUALSelecting a New “Activity”The Genesis’s WATCH and LISTEN buttons display the activities you cancontrol with your Genesis. When you want to watch something else (aDVD movie, a videotape or an HDTV broadcast), simply press theWATCH button and select the new activity. When you want to listen tothe radio or to a CD, touch the LISTEN button and select what you wouldlike to listen to.Your installer will have programmed the button you pressed to totally con-figure your system to watch or listen to whatever you selected. Now, thescreen will change, and all of the LCD buttons will be reconfigured togive you full control of your system while watching or listening to yourselection!Press either of the PAGE buttons to see any other available choices. PAGE DISPLAYAt the bottom of the LCD screen, thepage display informs you if there areother pages of buttons available.When you press the WATCH button,you can see the most frequently usedactivities you have for watching thesources in your system. When you press the LISTEN button,you can see the most frequently usedactivities you have for listening inyour system.
Using the Genesis to Control an “Activity”Once you’ve selected a new activity, the Genesis displays the title of theactivity at the top of the screen. Below the title, the LCD displays the cus-tomized names of any special features you need for the activity. All thehard buttons of the Genesis have now changed to functions optimized forthis activity.The Title displayswhat activity youcan control.The Channel andPrevious Channelbuttons will changechannels when youhave selected anactivity like WatchCABLETV or Watch SAT TV .The Number keypadwill enter numbers forthe activity you’veselected. Thus, forwatching Cable TV,you use the numberkeypad to enter chan-nel numbers, whilewhen listening to CD,the number keypadenters track numbers.The LCD buttonlabels describe special featuresfor this activity. The transport buttons(Play, Stop, Skip-, Skip+,FF, REW and Pause)operate when the select-ed activity requires them(for example, if youwatch CABLETV with aTiVo type of DVR, thesebuttons will control thebuilt-in DVR, while ifyou are watching aDVD, these buttons willcontrol the DVD player).The Volume andMute buttons alwayscontrol the soundregardless of whatscreen is displayed.Press either of thePAGE buttons to seeany other availablechoices. The 4 way cursorbuttons enable youto navigate onscreen guides andmenus with ease.Page 6GENESIS OWNERS MANUAL
Displaying the Setup ScreenYou can adjust the settings of the Genesis whenever youlike by pressing and holding both the WATCH and theENTER button at the same time for three seconds. Whenyou do, the screen will change to the SETUP screen. Ifyou do not press any button on the SETUP screen within30 seconds, the Genesis will time out and automaticallyreturn to normal operation. You can return to normaloperation before that by pressing either the WATCH orthe LISTEN button.At the same time, press andhold both the WATCH but-ton and the ENTER button.When the SETUP screenappears, you can release thetwo buttons.GENESIS OWNERS MANUALPage 7Selecting from the Setup ScreenSimply touch the button for the setting you’d like to adjust:LCD - The appearance of the screen.LIGHT - What the LIGHT buttondoes.SOUND - The volume of thebeeps.SYSTEM - The battery low warn-ing.VERSION - No adjustments arepossible. Displays factory info.
Setting the LCDWith these settings, you can set the Genesis to constantly display the LCDwhen not in use, or show a blank screen when not in use. Additionally, youcan control the contrast of the screen.Page 8GENESIS OWNERS MANUALTo activate the LCD On/Off setting, pressthis button. See below.To activate the CONTRAST setting, pressthis button. See the next page.To activate the BRIGHTNESS setting, pressthis button. See the next page.To exit without saving any changes youhave made, press EXIT.To exit without saving any changes youhave made, press EXIT.To change the timer interval, press theLEFT or RIGHT arrow keys.If you set the LCD to OFF, the timer set-tings will appear. The LCD will go blankafter waitting the interval you set here byadjusting the LEFT and RIGHT arrowkeys.The timer can be set to turn off the LCDbetween 10 seconds and 20 minutes.To SAVE any changes you have made,press SAVE.LCD Timer Setting:The Timer Interval is displayed here.
Page 9GENESIS OWNERS MANUALSetting LCD ContrastYou can adjust the contrast of the LCD screen using the LEFT and RIGHTarrow keys once the LCD contrast screen has been selected (shown on theprevious page).Setting LCD BrightnessYou can adjust the brightness of the LCD screen using the LEFT andRIGHT arrow keys once the LCD Brightness screen has been selected(shown on the previous page).Adjust the LCD brightness with theLEFT and RIGHT keys as shown inthe previous pages.The current CONTRAST is displayed here via a bar graph.Adjust the CONTRAST setting withthe LEFT and RIGHT keys as shownin the previous pages.To exit without saving anychanges you have made, pressEXIT.To SAVE any changes you havemade, press SAVE.The current Brightness is dis-played here as a bar graph.To SAVE any changes you havemade, press SAVE.To exit without saving anychanges you have made, pressEXIT.
Light SettingsYou can adjust the backlighting of the remote in two additional ways:1. You can turn on/off the LCD and the hard button backlighting. 2. You can select the amount of time the lighting stays on after the last buttonpress from a range of values between 10 seconds and 90 seconds.Sound VolumeYour Genesis beeps whenever a button is pressed. However, you can adjustthe volume of the beep to one of four levels as shown here:Page 10GENESIS OWNERS MANUALThe current Beep volume is dis-played here as a “bar”.OFFSLIGHT BEEPMODERATE BEEPLOUDEST BEEPAdjust the volume of the beep byTAPPING the LEFT and RIGHT arrowkeys as shown in the previous pages.The current timer setting is displayed here in seconds.Adjust the backlighting timer settingwith the LEFT and RIGHT keys asshown in the previous pages.Change whether the backlight-ing is on or off by pressing thisbutton. If you want the backlightingalways OFF, set it to OFF.If you would like the backlight-ing on, select ON.
System SettingsYou can set your Genesis to display the Low Battery warning at a powerlevel between 0% and 20% (in 5% increments). Version Information DisplaysShould you be curious, the Version indicates what firmware and softwareversions were used to program your Genesis.Page 11GENESIS OWNERS MANUALTo exit, press WATCH.Press here to adjust the batterywarning level. The Memory bar indicatesavailable memory with Black.The memory in use is White.The Power bar indicates avail-able power with Black. To exit, press WATCH.
Page 12GENESIS OWNERS MANUALUSALimited Warranty StatementYour Universal Remote Control, when delivered to you in new condition,is warrantedagainst defects in materials or workmanship as follows: UNI-VERSALREMOTE CONTROL,INC. warrants this product against defects inmaterial or workmanship for a period of one(1) year and as set forth below.Universal Remote Control will, at its sole option, repair theproduct usingnew or comparable rebuilt parts, or exchange the product for a compara-blenew or rebuilt product. In the event of a defect, these are your exclusiveremedies.This Limited Warranty covers only the hardware components packagedwith the Product. Itdoes not cover technical assistance for hardware or soft-ware usage and it does not coverany software products whether or notcontained in the Product; any such software is pro-vided "AS IS" unlessexpressly provided for in any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freight prepaid,in its originalpackaging or packaging affording adequate protection toUniversal Remote Control at theaddress provided in the Owner's Manual.It is your responsibility to backup any macroprogramming, artwork, soft-ware or other materials that may have been programmed intoyour unit. It islikely that such data, software, or other materials will be lost during ser-viceand Universal Remote Control will not be responsible for any suchdamage or loss. Adated purchase receipt, Bill of Sale, Installation Contractor other verifiable Proof ofPurchase is required. For product support andother important information visit UniversalRemote Control's website:http://www.UniversalRemoteControl.com or call the UniversalRemoteControl Customer Service Center (914) 835-4484.This Limited Warranty only covers product issues caused by defects inmaterial or work-manship during ordinary consumer use. It does not coverproduct issues caused by anyother reason, including but not limited toproduct issues due to commercial use, acts ofGod, third-party installation,misuse, limitations of technology, or modification of or to anypart of theUniversal Remote Control product. This Limited Warranty does notcoverUniversal Remote Control products sold as USED, AS IS, REFUR-BISHED, so-called "BSTOCK" or consumables (such as batteries). ThisLimited Warranty is invalid if the factory-applied serial number has beenaltered or removed from the product. This LimitedWarranty is valid only inthe United States of America. This Limited Warranty specificallyexcludesproducts sold by unauthorized resellers.
Page 13GENESIS OWNERS MANUALUNIVERSALREMOTE CONTROLSHALLNOT BE LIABLE FOR ANYINCI-DENTALORCONSEQUENTIALDAMAGES FOR BREACH OF ANYEXPRESSOR IMPLIED WARRANTYOR CONDITION ON THIS PRODUCT. EXCEPTTO THE EXTENT PROHIBITED BYAPPLICABLE LAW, THERE IS NOOTHER WARRANTYEXPRESSED OR IMPLIED. UNIVER-SALREMOTECONTROLWILLNOT BE HELD RESPONSIBLE FOR STATEMENTS MADE-BYOTHERS CONCERNING THE MERCHANTABILITYOR FITNESS FORAPARTICULARPURPOSE ON THIS PRODUCT. Some states or jurisdictionsdo not allow the exclusion orlimitation of incidental or consequential dam-ages, or allow limitations on how long animplied warranty lasts, so theabove limitations or exclusions may not apply to you. ThisLimitedWarranty gives you specific legal rights and you may have other rightswhich varyfrom state to state or jurisdiction to jurisdiction.SpecificationsMemory - 4 Megabits of Flash Memory (for User Configuration)Devices - Flexible, typically can support up to 40 DevicesPages - Flexible, typically can support up to 40 Pages on each DeviceLearning Capability - Standard frequencies (15kHz to 460kHz)Macro Capability - Up to 255 steps each, however nesting is allowed IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environmentRF Range (radio frequency): 50 to 100 feet, depending upon the environmentRF Frequency: 418MHzWeight: 14 ounces (with batteries)Size: 8” H x 2.25” W x 1.25” DBatteries: 4 AAA Batteries
Page 14NOTEInformation To The UserThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouragedto try to correct the interference by one more of the following measures:◆Reorient or relocate the receiving antenna.◆Increase the separation between the equipment and receiver.◆Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.◆Consult the dealer or an experienced radio/TV technician for help.WarningChanges or modifications not expressly approved by the manufacturercould void the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TVinterference caused by unauthorized modifications to this equipment.Such modifications could void the user's authority to operatethe equipment.
Page 15NOTE
Page 16NOTE
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comOCE-0050A REV. 03

Navigation menu