Ohsung Electronics URCMX350-N RF Remote Controller User Manual I User s Manual

Ohsung Electronics Co., Ltd. RF Remote Controller I User s Manual

Contents

User Manual

  Order Number  : GETEC-C1-10-200  FCC Certification Test Report Number  : GETEC-E3-10-107  Page 1 / 1  EUT Type: RF Remote Controller FCC ID.: OZ5URCMX350-N   APPENDIX I : USER’S MANUAL
Owner’sManual
MX-350 Owner’s Manual © 2004 Universal Remote Control, Inc.The information in this manual is copyright protected. No part of this manual may be copied or reproducedin any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CON-TROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMIS-SIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without priornotice. MX-350 is a registered trademark of Universal Remote Control, Inc. Power of Simple is a trademark ofUniversal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks oftheir respective companies or organizations.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 Thank You!Thank you for purchasing the MX-350     Pre-Programmed andLearning Remote Control. This manual is designed to assist youstep-by-step as you setup the MX-350 to replace all of yourremote controls and automate your home entertainment system.TM
1Table of ContentsGetting Started 2Button Layout 3Basic Setup 5Pre-Programmed Method 5Learning Method 9Volume Control Punch Through 12Advanced Operation 14Advanced Setup 16Editing Button Labels 16Macro Button Setup 19Favorite Channel Setup 21Hiding and Adding Pages 23Erasing 25Cloning One MX-350 to Another 26Recalling Pre-Programmed Settings 27Utilizing Optional RF Base Stations 28IR/RF Signal Setting 31ID # - Setting Base Station Address 33EMITT - Setting IR Emitter Outputs 34BLAST - Setting the Front Panel Blaster On or Off 35Pre-Programmed Code Tables 37Frequently Asked Questions 61Warranty 62Specifications 63Federal Communication Commission Interference Statement64
2Getting StartedCongratulations!You’ve purchased one of the most advanced and easy to setup control sys-tems available. The MX-350’s built-in library includes thousands of differentbrands and models of remote controls. In most systems, all you have to doto setup the MX-350 is enter which brands and models you own. If you owna component too new to be in the library, the MX-350 uses advanced learn-ing technology to quickly set each MX-350 button, one at at time. Setting upyour MX-350 to replace all your existing remote controls can be done in afew minutes. Basic Setup is described on pages 5 to 13.The MX-350’s exciting advanced features automate and customize operationin many ways. You could use Macro Setup to power on all of your compo-nents and start the show with the press of one button!  With the MX-350’sunique Favorite Channel capability, you can tune in a channel with thepress of one button instead of entering the entire channel number. Any ofthe button names on the display can be edited as you like.  It is best todelay any Advanced Setup (described on pages 14 to 36) until after youfinish Basic Setup. Battery InstallationRemove the battery compartment cover by pressing up the cover lock.Insert four AAA batteries into the battery compartment as shown in thediagram. The MX-350++++----
3MAINButtontakes youto theMAINMenu.ScreenLabeledDisplayButtonsLIGHTButtonPAGENumbersFUNCTIONButtons TITLEFAVORITECHANNELButtonPAGEButtonschange thepage ofDisplayButtons.Button LayoutUniversal Remote Control, Inc.Transmitting“Busy” SignalIndicator**Note: When a command, macro or favorite channel is being transmitted, an icon will appearin the top right corner of the display. While the MX-350 is “busy”, it will ignore a button push.
4The MX-350Selecting a New DEVICE Changes All Button Commands InstantlyThe MX-350 can operate ten different devices even though it is only oneremote control. Let’s try it now! Press the MAIN button, then press the TVDEVICE button.The top of the screen changes from MAIN to TV. Now all of the buttonschange their function to operate a TV. Press the page buttons. Watch thelabels of the display buttons change with each press. There are eight pagesof display buttons already labeled for TV operation. To operate anothercomponent (e.g., VCR, DVD etc.), press the MAIN button to return to theMAIN menu. The MAIN menu displays five of your Devices on thescreen. Simply press one of the screen-labeled Device buttons to operateanother device. If you don’t see the device name you want, then use thePAGE buttons to display the remaining five devices on page 2 of theMAIN menu. Light ButtonPress the LIGHT button to backlight all the buttons. To turn off the back-lighting, press the LIGHT button again, or just wait ten seconds (the back-lighting automatically shuts itself off).TVDEVICEButtonMAINButtonLIGHTButton
5Basic SetupYou can start setting up your MX-350 using either the Pre-ProgrammedMethod or the Learning Method. However, all the buttons of the MX-350 aresetup at once with the Pre-Programmed Method, so it is usually faster thanthe one-button-at-a-time Learning Method.Pre-Programmed MethodPower on the A/V component you wish to setup, so that you can testcodes by sending power off commands.Refer to the pre-programmed code tables on pages 38 - 59 andwrite down the code numbers listed for your A/V component. Thecode numbers are listed by categories of devices, then by brand.See page 37 for a category list.Press and hold both the MAIN and ENT (Enter) buttons for approxi-mately three seconds. The top of the display will show “SETUP”.You are in SETUP mode now.Note: You have 30 seconds to perform a step while you are in SETUP mode. Ifyou don’t press a button within that time, the MX-350 will time out and return tonormal operation.MAINButton ENTButton123Universal Remote Control, Inc.
6Press the P-PRO button to select the Pre-Programmed Method.The display changes so that you can select which Device button tosetup. In this step you choose the name of the device you’d like to setup.Use the cursor UP or DOWN buttons to change the flashing name.When it is correct, press the SELECT button.For Example: I wanted to setup the TV Device button first, so I pressed thecursor UP or DOWN until “TV” was flashing in the display.The bottom of the display will flash “FROM TABLE”. P-PROButtonThe MX-35045UPSELECTDOWN    Press a Page button to display theother five Device names.FirstFiveDeviceNames
7In this step you verify the type of component you plan to operatewith this device button. If the flashing name is correct, pressSELECT. If the name flashing in the display is incorrect (for example, you are setting upAUX to operate a Laser Disc Player), use the UP and DOWN buttons tochange the flashing name to the correct type of component.Note: Each name that appears in the display may include several types ofcomponents. For example, the DVD category includes DVD players andLaser Disc Players.  See page 37 for a list of component types each CodeTable contains.Point the MX-350 at the component, then enter the first three digitcode number from your notes using the numbered buttons. Afteryou enter each three digit number, look at the component to see ifit turned off.Continue to enter code numbers until the component powers off. For Example: I have a Sony TV. I found the code numbers 070, 139,147,126, 185, 194 and 085 under Sony in the TV TABLE. Using the numberedbuttons on the MX-350, I entered  070 and looked at the TV. It didn’t turn off,so I entered 139, then 147 and so on, until I found the code that poweredoff the TV. 67SELECTUse thenumberbuttons toenter the codenumber.Universal Remote Control, Inc.
8Note: If a component fails to turn off after you have entered all of the codenumbers listed for your brand, you can scan through the other brands in thetable using the UP and DOWN buttons (there is a chance that yourcomponent was actually manufactured by another brand). However, most ofthe code tables are so large it is usually faster to use the Learning Method onPage 9.When the component turns off, save the code number you enteredby pressing the SAVE button that appears on the screen. Exit SETUP mode by pressing the MAIN button two times. Whenthe display shows “MAIN”, you are back in normal operatingmode.SAVEButtonCodeNumberYouEnteredMAINButtonThe MX-35089Scan Up to the next CodeNumberScan Down to the previous Code NumberPress Power On or PowerOff to test if the devicepowers off.
9Repeat steps one through nine for each of your devices. If you aremissing any commands, use the learning method, described nextLearning MethodThe MX-350 can learn commands from your old remote controls one-but-ton-at-a-time by following these simple steps:Line-up the MX-350 with your old remote control, head-to-head,one or two inches apart.On the MX-350, press and hold the MAIN and ENT (Enter) buttons atthe same time for approximately three seconds. The top of the dis-play will show “SETUP”. You are in SETUP mode now.Note: You have 30 seconds to perform a step while you are in SETUP mode. Ifyou don’t press a button within that time, the MX-350 will time out and return tonormal operation.Press the LEARN button. The top of the screen will change to “LEARN”.10Universal Remote Control, Inc.LEARNButton123
The display will show a list of the first five devices. Select the device you would like to teach commands to by pressingthe Device button.Now, press any button you want to teach a command to. Note: If you don’t see the display button you would like to teach, use thePAGE buttons. The only buttons you can’t teach are the PAGE and MAIN but-tons.Once you press a button, the top of the display will change from“LEARN” to “READY”.10The MX-350456Press  anyof theDeviceButtons.PressanyButton.
11Press and hold the button you want on your old remote control untilthe display changes to either “GOOD” or “FAILED”.If the “GOOD” label appears on top of the display, you were successful.Now, press the next button you wish to teach. Keep repeating steps 6through 7 until you have learned all the buttons you want.If the “FAILED” label appears on top of the display, try to teach thesame button in MX-350 once again by repeating steps 6-7. Continue to teach any commands from any of your remote controlsby repeating steps 5-7 (to go back to step five, press MAIN once).Once you completed teaching all the buttons, return to normal opera-tion by pressing the MAIN button twice. Test all your new commands. If any of them don’t work, try learning again using these notes:789Move to another room. Plasma TVs, sunlight, halogen orquartz lighting can interfere with the learning process.Although the old remote control seems to work fine,change the batteries to fresh alkaline batteries.Vary the distance between the remote controls gradually. Try 1/4”, 1”, 2”and so on, up to 4 feet.Tap the button on the original remote control instead ofpressing and holding it during the learning process.Universal Remote Control, Inc.
Volume Control Punch Through In most home entertainment systems, the sound volume is only con-trolled by one device. In some systems, it is the TV speakers that makethe sound, so you would use the TV device on the MX-350 to raise andlower the volume. In another system, it might be a surround soundreceiver and speakers that control the sound, so you would use theMX-350’s AUDIO device to adjust the volume. Constantly switching theMX-350 to TV or AUDIO to adjust the volume is inconvenient in dailylife.You can use Punch Through to set the MX-350’s volume buttons to alwayscontrol the sound in your system. That way when the MX-350 is set toVCR or DVD, the volume up, down and mute buttons will work perfect-ly without switching back to AUDIO or TV. Here’s how:Enter Setup mode by pressing and holding both MAIN and ENT forthree seconds. The top of the display show you are in SETUP modenow.Note: You have 30 seconds for each step, otherwise the MX-350 will timeout automatically. Press the PAGE UP button to get to page 2 of the SETUP menu.Press the PUNCH button.Press the VOL button. The display confirms by displaying “VOL” at thetop of the screen. This sets up the group of three buttons (Volume Up,Volume Down and Mute) in one action!The bottom of the display flashes ”PUNCH TO”. 12The MX-350123SelectVolume
13Press the device button for the device that doesn’t have volumecontrol commands yet (i.e.,DVD). This is the device you are goingto PUNCH TO for the volume and mute commands.Note: If you wish to PUNCH to the MAIN device, press the POWER OFFbutton at this time.The bottom of the display will then flash “PUNCH FROM”. Nowyou select the device that has the volume commands you want(i.e.,TV for systems using the TV speakers, AUDIO for systems withsurround sound receivers). The bottom of the display will flash “SAVED”.Repeat steps 3-5 until all your devices operate the volume perfect-ly. Press the MAIN button twice to  return to normal operatingmode and test your Punch Through settings.Note: The Punch Through feature is not limited to volume and can also be applied to channel or other functions. If you findyourself switching to a particular device frequently to use a group of con-trols, consider using Punch Through for another group, as listed here:VOL - Volume Up, Volume Down and MuteCH - Channel Up, Channel Down, Prev. Channel and Number buttons (0-9, +10, ENT)PLAY - Play, Stop, Pause, Rewind and Fast ForwardVOD - Guide, Menu, Info, Exit, Up, Down, Left, Right, SelPOWER - Power On and Power Off645Universal Remote Control, Inc.Selectthe Deviceyou want to“Punch To”
14Advanced OperationSetting Backlight OptionsYou can adjust the amount of time that the MX-350 backlight stays on byentering the SETUP mode and proceeding to page two (using the PAGEUP button), then pressing the LIGHT button on the display (not theBacklight button). Then enter the amount of time you would like thelight to stay on using the number pad (0-99 seconds). After making yourselection, press the SAVE button. If you don’t want backlighting at all (this extends battery life), press the ONbutton that appears on the screen. The ON will change to OFF. Press theSAVE button. Exit the setup mode by pressing the MAIN button.The FAV ButtonWhen you press the FAV button, the display changes to a list of yourfavorite TV channels. Each button can be set to instantly select the channelon your TV. There are eight pages of five favorite channel buttons for a totalof 40. Simply touch the PAGE buttons to display the other favorite chan-nels. To return to the last device you viewed, press MAIN once (a secondpress will take you to the MAIN menu).To setup your Favorite Channel buttons go to page 21.The MX-350FavoriteChannelButtonsFAVButton
15Adjusting ContrastYou can make the text darker by pressing both the MAIN and cursor UPbuttons at the same time. To make the text appear lighter, press both theMAIN and cursor DOWN buttons at the same time.Transmitting (Busy Signal) IconWhen a command is being transmitted, an icon will appear inthe top right corner of the display. It is a useful aid when settingup Macros and FAVs, since it flashes with every step of asequence of commands.Contrast set low.CursorUp & Down ButtonsMAIN ButtonContrast set high.Universal Remote Control, Inc.
16Advanced SetupAfter you’ve finished all your basic setup, you can choose to make opera-tion easier by customizing the MX-350 just the way you want, using theAdvanced Setup features described in this section.Editing Button LabelsYou can change the name of any of the display buttons (includingFavorite Channels) by following these steps:Press and hold both the MAIN and ENT (Enter) buttons  for approx-imately three seconds. The top of the display will show “SETUP”.You are in SETUP mode now.Note: You have 30 seconds to perform a step while you are in SETUP mode. If you don’tpress a button within that time, the MX-350 will time out and return to normal operation.Press the EDIT button.The display changes to the EDIT menu. Press the TEXT button.The screen displays the list of devices and “EDIT” will appear atthe top of the screen. Navigate to the device and page where thereis a button label you want to EDIT, selecting between the FAV,MAIN, DEVICE, then using the PAGE button.The MX-350TEXTButton1234EDITButton
17Press the button you wish to edit. The first character of your buttonlabel blinks.5BlinkingCharacterEDIT flashes at the bottom of the screen.Universal Remote Control, Inc.A,B,C,1 D,E,F,2 G,H,I,3J,K,L,4 M,N,O,5 P,Q,R,6S,T,U,7 V,W,X,8 Y,Z,9DOWN Cursorbutton deletes the currentlyblinking character.UP Cursorbutton deletes ALL text.LEFT Cursor button moves blinkingcharacter left.RIGHT Cursor button moves blinkingcharacter right.Change the character byusing any of the numberkeys. Each press of thesame number button selectsthe next character of thatnumber’s group, as shownhere.Once the character youwant appears, move to thenext space by pressing theRIGHT cursor button.6
18When you are finished editing the button, press the button youedited and “SAVED” will flash at the bottom of the display.To change any other button labels on the same device, press the nextbutton, then repeat steps 6-8. If you wish to edit a button on anotherdevice, press the MAIN button once, then repeat Steps 4-8. Once you’ve finished editing buttons, press the MAIN button fourtimes to return to normal operation.Edit the MAIN Menu Title or a MAIN Menu Device LabelYou can change the title of the MAIN Menu or a MAIN Menu devicelabel by following these steps after you’ve entered TEXT Edit mode(described in the steps one through four in the preceding pages).Once you’ve entered TEXT Edit mode, the top of the screen displaysEDIT and the first five devices of the MAIN Menu. There are fivepages you can access via the Page UP or DOWN buttons. When thetop of the screen says EDIT, pressing a device button jumps to the pages forthat device so that you can edit a device’s LCD buttons normally. However,if you continue to tap the Page button, the top of the screen will changefrom EDIT to MAIN. While it says MAIN, there are three pages of LCD but-tons. The first two list the Devices of the MAIN Menu and enable you tochange the device names when pressed. The third page titled MAIN has onlyone entry for the LCD buttons; “MAIN”. When you press the correspondinghard button, you can relable the MAIN title itself.Select the title to edit by pressing the adjacent hard button.Edit the text (described on steps 5 and 6 on page 17).Press the button you edited to save the changes. Here’s an example:The MX-3507891234Each of the MAINmenu device but-tons has been cus-tom labeled forthe activities theuser likes to useout on the Patio.The MAIN Menutitle has beenchanged to PATIO,so whenever theMAIN button ispressed, the user isreminded that this isthe Patio remote.
19Macro Button SetupImagine turning on your TV, your DVD player and your surround soundreceiver by pressing a single button on your MX-350!  What would nor-mally take three remotes and three button pushes, the MX-350 canaccomplish with the press of one button. We call that a “Macro”.  Anyof the Display buttons, the Power On or the Power Off buttons (on anyDevice or Page) can be set to be Macro buttons! To setup a macro button, follow these easy steps:Enter the SETUP mode by pressing and holding both MAIN andENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will timeout automatically. Press the MACRO button. The  top of the display will show“MACRO”. The bottom of the display will flash “SELECT”. Navigate to the Device and Page where there is a button you wouldlike to set as a Macro button using the MAIN, DEVICE, and PAGE but-tons.Advanced Options: If you wish to set one of the DEVICE buttons as a macro, on step 3, press thePage Up button twice. The top of the display changes to MAIN, and you cannavigate to MAIN page 1 or page 2 before going on to Step 4. Another option for DEVICE button macros is to only send the macro if the but-ton is pressed and held. This is setup by entering a delay as the first step of themacro. The amount of delay determines how long the user must press the but-ton before the macro is sent.  The advantage of this option is that a normalpress of the DEVICE button will simply switch devices without issuing themacro.Press the button you want to set as a Macro button. The top of thescreen will display the label of the button you selected. At the bot-tom of the screen it displays “STEP0”, indicating that no macrosteps have been entered yet.Universal Remote Control, Inc.1234
20Navigate to the Device and Page that has a button you want in yourmacro using the MAIN, DEVICE and PAGE buttons. Then press thebutton with the command you want. Whenever a button is pressed,another Macro step is counted and displayed at the bottom of thescreen. Don’t worry about the number of steps. Each macro button canstore up to 190 steps, so you are not likely to run out of steps!Note: You can program delays in between commands by pressing thePAUSE button. Each press adds half a second to the delay.Press the LIGHT button to end your macro. A new screen displaysthree choices:Press the MAIN button twice to return to normal operation.The MX-350SAVEButtonSAVE —UNDO —EXIT —If you are happy with your macro, press theSAVE button.The UNDO button lets you erase the last step. The EXIT button erases all the macro steps.567
21Favorite Channel SetupImagine surfing all your favorite channels, without ever typing in achannel number. By simply setting up each of the favorite channel but-tons, you can make TV, cable or satellite operation fun and easy. Tosetup a Favorite Channel button, follow these steps:Enter SETUP mode by pressing and holding both MAIN and ENTfor three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will timeout automatically. Press the FAV display button. The  top of the display will show “FAV”. The bottom of the displaywill flash “SELECT”. Use the Page buttons until you can see the name (i.e., ABC, CBS,NBC) of the favorite channel you wish to setup.Press the favorite channel button you wish to setup. The top of thescreen changes to show the channel name. The bottom of thescreen displays “STEP0”, indicating that you have not entered thechannel number yet.Press either the TV, SAT or CABLE Device button (select the device youuse to enter channel numbers).Press each of the number buttons for the channel.Note: Some brands of television require an ENT(Enter) command after thechannel numbers. 12FAVButton345Universal Remote Control, Inc.6
22Note: If a number is repeated when setting the channel (for example,channel“33” or “522”) it is usually best to set a half second delay in between theidentical numbers by pressing the PAUSE button. Each press of the PAUSEbutton increases the delay by a half second.Press the LIGHT button after you enter the channel number. A new screen appears:To save the channel you entered, press the SAVE button. TheUNDO button lets you erase the last entry. The EXIT button erasesall entries for this button.When you are finished setting up Favorite Channel buttons, pressthe MAIN button twice to return to normal operation.The MX-35078SAVEButtonUse the PAUSE Button to setdelays between steps, each pressof the pause button increases thedelay by a half second.
23Hiding and Adding PagesEach of your MX-350 Devices contains up to eight pages (if a page has noIR data, it will be HIDDEN). However, you can HIDE any page from theusers view. A hidden page still appears in SETUP modes, so can be usedin macros. If you change your mind and would like the user to see ahidden page, you can ADD them. You can add or hide pages on devices,or on your favorite channel pages using this simple process:Note: Be sure to program your Macros before you hide pages with a poten-tial macro step in them. You can’t access hidden pages during macro setup.However, after you finish Macro setup, you can hide pages without affect-ing operation of your macros.Enter SETUP mode by pressing and holding both MAIN and ENTfor three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time outautomatically. Press the EDIT button.Press the PAGE button.“PAGE” appears at the top of the screen.Universal Remote Control, Inc.123EDITButtonPAGEButton
24Navigate to any page, using the MAIN, DEVICE, FAV, and PAGE but-tons.When you select a page, the top of the screen indicates whether you want to “ADD?” or “HIDE?” the page dis-played. When you would like to change a page’s visibility, press theLIGHT button.You can continue to ADD or HIDE pages on other devices by repeat-ing Steps 4 and 5. When you are finished adding and hiding pages, press the MAIN but-ton four times to return to normal operation.The MX-3504567This page is hidden. To ADD it, press theLIGHT button.This page is visible. To HIDE it, press theLIGHT button.MAINButtonDEVICEButtonsPAGEButtonsFAVButton
25ErasingYou can erase an individual button with a learned command, a macroor a favorite channel. You can erase an entire Device’s learned com-mand or macro buttons. You can also erase ALL your learned com-mands on all devices or all your macros or favorite channels every-where. If you really want a fresh start, it is possible to reset everything tothe factory default condition.Erasing Learned Buttons, Macros or FavsEnter SETUP mode by pressing and holding both MAIN and ENTfor three seconds. Note : You have 30 seconds for each step, otherwise the MX-350 will timeout automatically. Press a PAGE button to display page two of Setup.Press the ERASE button.Press either the LEARN, MACRO or FAV button.The following screen appears:If you press ALL, the MX-350 displays a SURE? button. After the SUREbutton is pressed, all the buttons will be erased.If you press DEVICE, a list of Devices will appear. Press thedevice button that you wish to erase. The bottom of the screenwill flash ERASE twice, then ERASED.If you press KEY, you’ll have to navigate to the Device and Pageyou want using the MAIN, DEVICE and PAGE buttons. Press abutton to erase it. The bottom of the display will flash ERASEtwice, then ERASED.To return to normal operating mode, press the MAIN button four times.1234ALL —DEVICE— KEY— Universal Remote Control, Inc.
26Erasing the Entire MX-350To erase EVERYTHING, press and hold both the MAIN and the STOPbuttons for 15 seconds. After 15 seconds, the RESET screen appears.Press the SURE button to erase all of your settings and return to the fac-tory default setup.Cloning One MX-350 to AnotherIf you own two or more MX-350, you can copy and transfer all the setupfrom one MX-350 to another. Just follow these easy steps:Enter SETUP mode by pressing and holding both MAIN and ENTfor three seconds.  Note: You have 30 seconds for each step, otherwise the MX-350 will timeout automatically. Press a PAGE button to display page two of Setup.Press the CLONE button. Align the two MX-350 head-to-head, about an inch apart.Press the RECV display button on the new MX-350 you would like tosetup by cloning.Press the SEND display button on the MX-350 you previously setup.Press the START button on the new MX-350 and then press theSTART button on the MX-350 you previously setup. Note: Cloning typically takes about 90 seconds.After completion, the cloned MX-350 will flash “GOOD”.Return to normal operation by pressing the MAIN button twice.The MX-350SUREButton 12345678
27Recalling Pre-Programmed SettingsIf you didn’t write down the code numbers you setup your MX-350 with,you can recall them via this simple process:Enter SETUP mode by pressing and holding both MAIN and ENTfor three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will timeout automatically. Go to page two of the SETUP menu via the PAGE UP button.Press the RECAL button. The display changes to the recall screens. Thescreen automatically switches between four screens, alternately flash-ing page one devices and code numbers then those for page two.Note: Pay attention to the page numbers on the bottom of the screen. Page1 code numbers are the ones setup for the Page1 Devices. Page 2 codenumbers are the ones setup for the Page 2 Devices.Write down the code numbers as they appear. Return to normal operation by pressing the MAIN button twice.12345Universal Remote Control, Inc.
28Utilizing Optional RF Base StationsYou can use the MX-350 as you would your other remote controls. It trans-mits very powerful line-of-sight output using infrared light commands(invisible to the naked eye). When you point the MX-350 at the components,expect the range to be between 30 and 50 feet. When the remote is notpointed in the general direction of the components, the range will vary(depending on reflective surfaces, lighting, etc.). However, the MX-350 also sends radio signals in every direction. By pur-chasing the MRF-100 or the addressable MRF-250 or MRF-350 base sta-tions, you can operate your equipment with the MX-350 50 to 100 feet away(through walls, doors, cabinets, inside or outside).  Since the RF BaseStation picks up the MX-350's radio signals from any direction, regardless ofdistance, the MX-350 doesn’t have to be pointed!Using MRF-250 or MRF-350 Addressable Base Stations By installing an MRF-250 or MRF-350 base station you gain freedom frominterference from a nearby room, house or condo where someone elsemight be using an RF remote control.  Addressable base stations areassigned one of 15 unique ID#’s.  This allows multiple equipment loca-tions in one house to be controlled by any MX-350. In operation it’s simple:when you select a device located in the Den, the MX-350 only talks to thebase station in the Den.  When you select a device located in the FamilyRoom, the MX-350 only talks to it!When used with an MRF-250 or MRF-350 base station, the MX-350 can beprogrammed to control identical components, for example, a media roomarray of TV’s .  The intelligent routing of the MRF-250 or the MRF-350 basestation will send your commands only to the TV you want to control.  Theother identical TV’s will not receive commands. Of course, if your systemutilizes identical satellite receivers, cable boxes, VCR’s or disc changersyou can utilize IR routing just as easily for them. If you have more than sixidentical components, up to 15 addressable MRF-250’s or MRF-350’s canbe installed to control them (thus allowing up to 90 identical componentsin one house). Note: The MX-350's radio signals will not control components directly.Components that came with "no pointing" radio remote controls cannotbe operated by the MX-350 unless the component can be switched to standard The MX-350
29Universal Remote Control, Inc.The RF Base Station converts radio signals to stan-dard infrared commands and sends them out via a built-in front blaster to components in the samecabinet space.The MX-350 sends radio signal tothe MRF-100, MRF-250 or theMRF-350 RF Base Stations.Self-adhesive “flashers” (included with the MRF-250 or theMRF-350) affix to the front panels of your components. Theflashers relay infrared commands to components out-of-sight ofthe front blaster. The flashers plug into the rear flasher line out-put jacks. Each flasher has a 10’ cable to easily reach compo-nents on nearby shelves.
30RF Settings OverviewThe MX-350 is factory set to work out of the box with an MRF-100 base sta-tion, which is not addressable. The only setting that affects operation withan MRF-100 is the RF/IR setting (to operate, the MX-350 must be set to IR/RFor RF- it will not operate the MRF-100 in IR mode). The MX-350 will operatewith an MRF-250 or MRF-350 base station set to ID#0 with the factorydefault settings. However, in order to gain the advantages of addressablebase stations (no interference between systems within one house or acondo development with potential interference between two different con-dos, turning the front blaster on or off, or routing identical commands to astack of identical televisions or satellite receivers etc.) you must reset theMX-350 and the Base Station ID# to any address other than ID#0. ID#0 is an“open door” to any RF signal, it is not a true address. It is extremely usefulfor testing whether any interference is present, since the base station’s STA-TUS LED will flicker if interference is present. Once the base station ismoved to a location where the LED does not flicker, the ID# can bechanged to one of the other addresses.Note that ID#0 does not allow any emitter or blaster configuration. Beforechanging any emitter or blaster settings, you must reset the ID# to anaddress other than 0. Here are the factory default RF settings of the MX-350:IR/RF (Type of Signal) - All devices are factory set to send both an IR line ofsight signal and an omnidirectional RF signal.ID# (Base Station Address) - All devices are factory set with ID #0.EMITT (IR Emitter Line Output) - All devices are factory set to output IR com-mands through ALL IR Emitter Line Outputs. BLAST (Base Station Front Panel Blaster) - The blaster is factory set to be on.Changing the RF SettingsEnter SETUP mode by pressing and holding both MAIN and ENTfor three seconds.  Note: You have 30 seconds for each step, otherwise the MX-350 will timeout automatically. Press the PAGE buttons until page three of Setup is displayed (RF isthe only choice on Page 3).The MX-35012
31Press the RF button. The RF Settings Menu appears. See the notes on the followingpages for more info on each option. Make your selection by press-ing the button you want:After you’ve made a new setting and SAVED your change, use theEXIT button to return to the RF settings menu to change any othersetting. Once you are finished all settings, use the MAIN button toreturn to normal operationIR/RF Signal SettingYou can set the signal to be IR line-of-sight only, RF only or IR and RFsimultaneously. Additionally, you can set the signal the same way for ALLten of your devices OR you can set the signal differently for each device(the plasma TV could be set to be IR line-of-sight only, while the DVDplayer and the Satellite receiver are set to be RF only). A good reason to setthe signal to RF only is to prevent too much IR being sent to a sensitivecomponent from two arrivals at the front panel (one directly from the MX-350, one from the RF base station). A good reason to set the signal to IRonly is that another room has an MRF-100 base station (no RF address) soit will receive commands from the MX-350 unless it is set to IR only.Universal Remote Control, Inc.345RF Button Signal (IR, RF or Both) Base Station ID #Emitters - ALL or a specific EmitterBlaster - Turn the Blaster On or OffExit this Menu
32From the RF Settings Menu, select IR/RF.Decide whether you are changing the Signal for all devices or justone of the devices of the MX-350.Select ALL to change the signal settings to ALLdevices in the MX-350. Then, go to Step 4.Select DEVIC to change the signal settings tojust one of the devices in the MX-350. Then, goto Step 3.The display changes to a list of the names of your devices. If you havetwo pages of devices, pressing either of the page buttons will displaythe other page. Select the device you would like to change IR/RF set-tings, then go to Step 4.Select the new setting by pressing the desired button, then press SAVEto save your new setting and return to the RF settings menu.The MX-3501243Both IR and RF will be output Only IR line-of-sightOnly RF will be outputSave the new settingExit this Menu without changingthe IR/RF settingsSelect a device PageButtonsdisplay theother pageof devices.
33When you are installing a system within 100 feet of another equipmentlocation in the same home OR near a home, condo, yacht or motorhome that might potentially have an RF remote control of any kind, it isrecommended that you use an addressable base station and set theaddress as described here.You can operate up to 15 different equipment locations, each with anMRF-250 or MRF-350 assigned a unique Receiver ID#.  You programeach or all of your MX-350 devices to the appropriate equipment locationby assigning the corresponding ID# in the RF Settings Menus.From the RF Settings Menu, select ID#.Decide whether you are changing the ID# for all devices or just oneof the devices of the MX-350.Select ALL to change the ID# for ALL devicesin the MX-350. Then, go to Step 4.Select DEVIC to change the ID# for just one ofthe devices in the MX-350. Then, go to Step 3.The display changes to a list of the names of your devices. If you havetwo pages of devices, pressing either of the page buttons will displaythe other page. Select the device you would like to change the ID#,then go to Step 4.Universal Remote Control, Inc.ID # - Setting Base Station Address123Select a device PageButtonsdisplay theother pageof devices.
Select the new setting by pressing the desired button, then press SAVEto save your new setting and return to the RF settings menu.EMITT - Setting IR Emitter OutputsThe MRF-250 and MRF-350 Base Stations enable you to route orsteer the IR commands from any Device to any or all of the IRLine Outputs. This allows you to control identical devices usingthe exact same IR commands (such as an array of television setsin a media room or a stack of identical satellite receivers installedin a central location with one satellite receiver dedicated to eachroom with a television). Each button push (or macro step) is rout-ed to the specific IR Line Output you’ve assigned to a device. Inthe factory set default settings, the MX-350 is set to route IR com-mands from any device to ALL IR Line Outputs simultaneously. Tochange the MX-350 default settings follow these steps:From the RF Settings Menu, select EMITT.Decide whether you are changing the Emitter settings for all devicesor just one of the devices of the MX-350.Select ALL to change the Emitter settings toALL devices in the MX-350. Then, go to Step 4.Select DEVIC to change the Emitter settings tojust one of the devices in the MX-350. Then, goto Step 3.34The MX-35012Displays the current ID# Change the ID# to a higher numberChange the ID# to a lower numberSave the new settingExit this Menu without changingthe IR/RF settings4
The display changes to a list of the names of your devices. If you havetwo pages of devices, pressing either of the page buttons will displaythe other page. Select the device you would like to change theEmitter settings, then go to Step 4.Select the new setting by pressing the desired button, then pressSAVE to save your new setting and return to the RF settings menu.BLAST - Setting the Front Panel Blaster On or OffThe MRF-250 and MRF-350 Base Stations have a configurablefront panel high power IR LED or “blaster” for controlling compo-nents in the same cabinet space without emitters attached to theirfront panel. The front panel blaster can overpower or saturate thesensors of some A/V components, so if intermittent operationoccurs, the blaster should be turned off.The blaster is incompatible with a stack of identical components,since all components will receive IR commands at once, no mat-ter what device is selected. Turn off the front panel blaster by fol-lowing the steps described on the next page:35Universal Remote Control, Inc.34Select a device PageButtonsdisplay theother pageof devices. Displays the Line Output # or ALLChange the Line Output upwardsChange the Line Output downwardsSave the new settingExit this Menu without changingthe EMITT settings
From the RF Settings Menu, select  BLAST.Decide whether you are changing the Blaster for all devices or justone of the devices of the MX-350.Select ALL to change the blaster settings toALL devices in the MX-350. Then, go to Step 4.Select DEVIC to change the blaster settings tojust one of the devices in the MX-350. Then, goto Step 3.The display changes to a list of the names of your devices. If you havetwo pages of devices, pressing either of the page buttons will displaythe other page. Select the device you would like to change IR/RF set-tings, then go to Step 4.Select the new setting by pressing the desired button, then press SAVEto save your new setting and return to the RF settings menu.36The MX-3501243Turn Blaster ON.Turn Blaster OFF.Save the new settingExit this Menu without changingthe BLAST settingsSelect a device PageButtonsdisplay theother pageof devices.
37Pre-Programmed Code TablesThe MX-350’s Pre-Programmed code library is divided into categories (TV, VCR,AUX, etc.). Each category actually includes many types of components. Forexample, the VCR category includes TV/VCR combo units.Within each category, the code numbers are listed in rows by brand(Sony, Panasonic, B & K, etc.). Some brands have more than one threedigit code for you to try. Just circle the correct row and refer to it whileyou setup (step-by-step instructions for using Pre-Programmed codes arefound on page 5).TVs, Plasma/LCD TVs, Projectors and MonitorsCable TV Descramblers/Tuners and WEBTVsDVD Players, TV/DVD Combos, TV/DVD/VCRCombos, DVD Recorders, and Laser Disc PlayersVCRs and TV/VCR Combos Amps, Preamps, A/V Receivers and XM RadiosSatellite ReceiverCD Players and Changers Digital Video Recorders (TiVo, Replay)Media PCs, GAME Systems, iPod,TAPE Decks, Lighting Systems and CustomInstallation Products    Pages 38-41Pages 41-43Pages 43-47Pages 47-49Pages 49-52Page 52-54Pages 54-56Page 56Pages 56-60TVCABLEDVDVCRAUDIOSATCDDVRAUXUniversal Remote Control, Inc.
38ADMIRAL 072 081 161 160ADVENT 247 388AKAI 474 475 404 405 458 473 197 146 248AMARK 112 143AMPRO 073 167 157 183AMSTRAD 052ANAM 043 054 056 080 112 131AOC 197 004 112 058APEX DIGITAL 006 310AQUAVISION 573 574ASTAR 477AUDIOVOX 452 453 454 503 076 103 273 388AVENTURA 401AVION 441BENQ 423 443BLAUPUNKT 088BOXLIGHT 266CAIRN 201CANDLE 197 002 003 004CAPEHART 058CETRONIC 043CITIZEN 197 002 003 004 043 101 103 143CLASSIC 043COBY 568CONCERTO 004CONTEC 043 050 051CORONADO 143CRAIG 043 054CROWN 043 143CURTIS MATHES 197 101 004 143CXC 043DAEWOO 004 016 043 044 076 077 103 114 125 127 143 369DAYTRON 004 143DELL 319 320 321DIBOSS 329DIGITAL PROJECTION437 570DREAMVISION 235 312 313 314 343 344 345DURABRAND 401DWIN 177 257DYNASTY 043DYNATECH 062DYNEX 399 454EIKI 187ELECTROGRAPH 470 466ELECTROHOME 024 076 143 196ELEMENT 526EMERSON 514 401 197 004 005 028 043 047 048 050 051 076 077 096 143 151 153 154155EPSON 324 579 590ESA 323FISHER 007 057FUJITSU 556 410 299 346 396 198 223 219 246FUNAI 028 043 052 401FUTURETECH 043GATEWAY 242 268GE 197 008 009 034 056 073 074 130 144 155 160 161 165 004 091 157 183BRAND CODE NUMBERSTV - TVs, Plasmas, Projectors and Monitors
39TV (continued) - TVs, Plasmas, Projectors and MonitorsGEM 391GOLDSTAR 004 102 106 112 113 116 119 127 143GRUNDIG 220 083HAIER 502 501HALL MARK 004HANNSPREE 381HISENSE 419 442HITACHI 554 411 460 380 004 009 010 011 012 023 075 143 158 163 166 072 221 250586 587 589HP 421 316 327 378 379 481HUMAX 518HYUNDAI 337 338ILO 472INFINITY 164INFOCUS 230 330 331 332 333 252 409 449 470 531 532 547 548 564INSIGNIA 350 354 399 400 401 402 403 454 457JBL 164JCPENNEY 197 004 008 009 024 030 065 101 143 156 160JENSEN 013JVC 471 533 534 034 038 070 083 145 199 210 240 241 244 245 406 420 581KEC 043KENWOOD 197 070KLEGG 466KLOSS 002 059KMC 143KNOLL SYSTEMS 409 230KONKA 457KREISEN 530KTV 197 043 143 154LG 522 523 243 284 283 363 364 365 366 569 576 577LODGENET 072LOEWE 222 223 224 164 322 422LOGIK 072LUXMAN 004LXI 166 007 015 052 081 160 164MAGNAVOX 549 467 197 003 004 022 059 060 061 063 064 127 160 164 094 226 264 390MARANTZ 535 536 537 538 539 540 558 559 560 561 562 563 197 164 184 397 281 584MATSUI 164MAXENT 242MEMOREX 007 072 004METZ 088MGA 197 004 024 028 042MINERVA 088MINTEK 362MISAKAI 401MITSUBISHI 519 540 550 004 024 028 040 042 109 124 146 191 225 237 267 300 348 450MTC 197 004 062 101NAD 015 025NEC 565 566 428 448 132 130 134 197 040 016 024 056 019 236 237 262 272 281575NIKO 527NIKEI 043NORCENT 367NUVISION 351 567OLEVIA 432 376 394 504ONKING 043BRAND CODE NUMBERS
40BRAND CODE NUMBERSTV (continued) - TVs, Plasmas, Projectors and MonitorsONWA 043OPTOMA 360 553 249 265 270OPTONICA 019 081ORION 096PANASONIC 552 524 429 430 034 056 080 092 164 208 261 359 377 583PHILCO 197 003 024 056 059 060 063 064 164 004PHILIPS 551 431 424 425 197 003 004 005 038 059 093 161 164 127 184 206 259 260264 274 294PHILIPS/MAGNAVOX260 294PIONEER 520 438 447 459 385 393 397 197 018 023 025 116 135 190 203 204 209 234237 334 335 336 533 582PLANAR 513POLAROID 507 508 505 506 493 494 388 353 354 356PORTLAND 077 004 143PROJECTION DESIGN545 546 417 418 541 542 543 544PROSCAN 144 160 161 165 167PROTON 004 058 131 143 171 173 193 392 571PROTRON 392 398 498 499 500PROVIEW 493PROX 572QUASAR 034 056 092RADIO SHACK 019 043 143 004 127RCA 160 161 165 065 156 144 197 004 023 024 056 074 152 333 585 588REALISTIC 007 019 043 047REVOLUTION HD 466ROCTEC 186RUNCO 395 414 415 416 476 168 169 178 179 180 181 182 183 073 157 340 341 342SAMPO 197 058 004 202SAMSUNG 516 517 427 434 461 462 463 464 004 050 089 101 105 127 143 160 211 228229 253 254 258 309 578SANSUI 399SANYO 509 510 511 512 166 007 020 053 057 082 187 266SCEPTRE 276SCOTT 004 028 043 048 143 497SEARS 015 030 004 007 028 057 143 094 160 082 165 166SELECO 189 200 205SHARP 496 555 214 251 306 307 308 326 468 170 081 019 028 029 014 004 022 143175SHERWOOD 349SIEMENS 088SIGNATURE 072SIM2 313 205 200SONY 521 412 444 445 446 491 070 085 139 147 126 185 194 207 213 277 278 279SOUNDESIGN 004 028 003 043SOYO 528SPECTRICON 112SPECTRONIQ 499 500SSS 004 043STARGATE 572SUPERSCAN 401SUPRE MACY 002SVA 328SYLVANIA 514 401 469 197 003 059 060 063 064 164 044 160 127 052SYMPHONIC 052 401SYNTAX OLEVIA 376 394 432 504TANDY 081
BRAND CODE NUMBERSTV (continued) - TVs, Plasmas, Projectors and MonitorsTATUNG 056 062TCL 426TECHNICS 034 080TECHVIEW 557TECHWOOD 004TEKNIKA 002 003 004 024 028 043 072 101 143TELEFUNKEN 037 046 086 087TELERENT 072TERA 172THOMPSON 215TMK 004TOSHIBA 480 455 456 465 007 015 030 040 062 101 138 216 287 290 291 230 288 289292 293 315 237 325 382 479TOTEVISION 143TRUTECH 529UNIVERSAL 008 009VIDEO CONCEPTS 146VIDIKRON 440 406 414 415 439 174 184 188 192 340 342 395VIDTECH 004VIEWSONIC 433 389 390 271 242VIORE 472VISCO 526 528VITO 478VIZIO 386 387WARDS 004 008 009 019 028 060 061 063 064 072 074 143 164 034WESTINGHOUSE 435 436 495 076 077 280WINBOOK 339YAMAHA 407 408 451 370 371 372 373 197 004YORK 004YUPITERU 043ZENITH 368 522 072 073 095 103 157 183 217 243 282 283 284 285 363ZONDA 112ABC 103 003 004 039 042 046 053ADB 115ADELPHIA 111 110 043 074ADVANCED NEWHOUSE043ALTRIO 043AMERICAST 099ANTRONIX 014ARCHER 005 007 014ARMSTRONG 074AT&T 151AT&T BROADBAND074ATLANTIC BROADBAND043 074BELL SOUTH 099BLUE RIDGE 043 074BRESNAN 074BUCKEYE COMM 074CABLEVISION 108 043 074CABLE - Cable Set Top BoxesBRAND CODE NUMBERS41
42BRAND CODE NUMBERSCABLE (continued) - Cable Set Top BoxesCENTURION 092CENTURY 007CHARTER 111 110 043 074CISCO 113 151 043CITIZEN 007COGECO 074COMBANO 080 081COMCAST 110 043 074 113COMSAT 074COMTRONICS 030COX DIGITAL CABLE043 074DIGEO 153DIGICABLE 101EAGLE 020 030 040EASTERN 057 066ELECTRICORD 032GEMINI 008 054GE 072GENERAL INSTRUMENT103 002 003 004 008 009 010 069 074 104GNC 099GOLDEN CHANNEL030HAMLIN 049 050 055HITACHI 103 055INSIGHT 074JERROLD 103 002 003 004 008 009 010 069 074 104 109 110M-NET 037MAGNAVOX 010 012 064 079 094MASSILLON 074MEDIA ONE 107MEDICOM 074MEMOREX 052MOTOROLA 151 152 110 111 112 120 103 002 003 004 008 009 010 069 074 104 109MOVIE TIME 028 032MOXI 111 153NCTC 074NOVAPLEX 092NOW TV 114NSC 015 028 038 071OAK 031 037 053PACE 043 074 113PANASONIC 044 047PARAGON 052PHILIPS 006 012 013 020 085PIONEER 103 034 051 063 076 105 043PRUCER 059PTS 011 071 074PULSAR 052QUEST 112RCA 047RCN 074RECOTON 098REGAL 049 050REGENCY 057RODGERS 043SAMSUNG 123 030SCIENTIFIC ATLANTA123 043 003 011 041 042 045 046 151
43CABLE (continued) - Cable Set Top BoxesBRAND CODE NUMBERSSEREN 043SERVICE ELECTRIC074SHAW 074SIGECOM 043SIGNAL 030SIGNATURE 103SL MARX 030SONY 108SPRUCER 047 078STARCOM 002 004 008 009STARGATE 008 030 097 104SUSQUEHANNA 043 074TADIRAN 030TIMELESS 030TIME WARNER 043 074TOCOM 039 040 056TOSHIBA 052UNIKA 007 014UNITED CABLE 004 053UNIVERSAL 005 007 014 032 035VIDEOTRON 043VIEWSTAR 012 015 018 086 087 088 089VERIZON 110 121WIDE OPEN WEST043 099ZENITH 052 060 093 100ECHOSTAR 106MITSUBISHI 102SONY 096PHILIPS/MAGNAVOX095ADCOM 157ALPINE 098AKAI 281APEX DIGITAL 111 112 115 116 236ARCAM 122AUDIOVOX 284CALIFORNIA AUDIO021 124CAMBRIDGE AUDIO215 323 333CARY AUDIO DESIGN174 312CLASSE 167COBY 258 260 326 327CYBERHOME 271 313DENON 329 007 080 173 287 288CABLE - WEBTVs BRAND CODE NUMBERSDVD - DVD PlayersBRAND CODE NUMBERS
44BRAND CODE NUMBERSDVD (continued) - DVD Players DP-1 190DURABRAND 143EMERSON 143ESA 143GATEWAY 175GE 026 027GRADIENTE 021GRUNDIG 083GO VIDEO 137 091 220 221 222HARMAN KARDON 084 140HITACHI 101FUNAI 143ILO 268INSIGNIA 292 143 297 322 331INTEGRA 324 142 180 192 280 338JVC 302 012KENWOOD 123 151KISS 279KLH 135KRELL 104LECSON 126LEXICON 305 148LG 303 321 322 091 057 074LINN 306 309LITEON 320 264 265MAGNAVOX 096 066 143 282MALATA 267MARANTZ 083 105 201 202 315 332MCINTOSH 125MEMOREX 163MERIDIAN 153MINTEK 111 282MITSUBISHI 017MYRYAD 134 102NAD 278 088 155NAKAMICHI 103ONKYO 324 314 274 280 076 035 180 338OPPO 266 311 312PANASONIC 289 285 205 198 199 021 042 139 144 150PARASOUND 245PHILIPS 317 276 277 066 095 105 166 176PIONEER 303 304 305 172 213 283 092 099 107 108 131 162 337POLKAUDIO 083POLAROID 235 236 237 284 295 296 297PRIMARE 193 194PROCEED 086PROSCAN 026 027RCA 290 307 026 027 273RJTECH 269ROTEL 335 336SAMSUNG 275 301 200 056 070 119 137 159 165 170SANSUI 154SANYO 147SENSORY SCIENCE223 222SHARP 325 094SHERWOOD 245 246 247 248 249 250
45BRAND CODE NUMBERSDVD (continued) - DVD Players SONY 286 033 118 126 145 160 189 191 238 239 240 241 242 243SPECTRONIQ 310SUPERSCAN 143SV2000 143SYLVANIA 143SYMPHONIC 143TAG MCLAREN 156TEAC 270THOMPSON 026 027THULE 177TOSHIBA 273 298 300 319 035 034 128 141 130 164 187 188 214TRUTECH 293VENTURER 149VINC 161 308YAMAHA 042 089 066 158 166 195 196 197 328 334ZENITH 057 074 091 182AUDIOVOX 284COBI 327DURABRAND 143EMERSON 143ESA 143FUNAI                    143INSIGNIA 143 292MINTEK 282POLAROID 284 295 296 297SAMSUNG 165SV2000 143SYLVANIA 143SYMPHONIC 143TRUTECH 293TOSHIBA 130 300DURABRAND 143EMERSON 143ESA 143INSIGNIA 143MAGNAVOX 143PANASONIC 144 205POLAROID 235SYLVANIA 143SIMPHONIC 143TOSHIBA 164 298DVD - TV/DVD CombosBRAND CODE NUMBERSDVD - TV/DVD/VCR CombosBRAND CODE NUMBERS
46GO VIDEO 137PANASONIC 150PHILIPS 105 (VCR Functions for VCR 067)SAMSUNG 137 159SANSUI 154TOSHIBA 141 187 214ZENITH 091 182CYBERHOME 271GATEWAY 175GO VIDEO 220 221 222ILO 268KISS 279LITEON 265 320LG 303 321 322ONKYO 324PANASONIC 139 289PHILIPS 176 277 317PIONEER 172SAMSUNG 301SENSORY SCIENCE222SONY 191 238 239 240 241 242 243 TOSHIBA 188ZENITH 182DENON 206 207FUNAI 120KENWOOD 152 013MAGNAVOX 032 121MARANTZ 211MITSUBISHI 121NAD 121OPTIMUS 049 013PANASONIC 113PHILIPS 032PIONEER 106 117 121RADIO SHACK 120RCA 002REALISTIC 049RUNCO 127SANYO 075SHARP 152 013SONY 053 110TECHNICS 113BRAND CODE NUMBERSDVD - DVD/VCR Combos BRAND CODE NUMBERSDVD - DVD RecordersBRAND CODE NUMBERSDVD - Laser Disc Players
47THETA DIGITAL 032TOSHIBA 152 106YAMAHA 043 129AIWA 034AKAI 016 043 046 124 125 AMPRO 072ANAM 031AUDIO DYNAMICS 012 023 039 043BROOKSONIC 035 037 129CANON 028 031CAPEHART 108CRAIG 003 040 135CURTIS MATHES 031 041DAEWOO 005 007 010 065 108 110 111 112 116 117 119DAYTRON 108DBX 012 023 039 043DYNATECH 034 053ELECTROHOME 059EMERSON 005 006 017 025 027 029 031 034 035 036 037 046 101 116 129 131 138 FISHER 003 008 009 010FUNAI 034GE 031 063 072 107 109GO VIDEO 132 136 040 115GOLDSTAR 012 013 020 101 106 114 123HARMAN KARDON012 045HITACHI 004 018 026 034 043 063 137 013INSTANTREPLAY 031JCL 031JCPENNEY 012 013 015 040 066 101JENSEN 043JVC 012 031 043 048 050 055 060 130KENWOOD 014 048 034 047LLOYD 034LXI 003 009 017 034 106MAGIN 040MAGNAVOX 031 034 041 067 068MARANTZ 012 031 067 069 MARTA 101MATSUI 027 030MEI 031MEMOREX 003 010 014 031 034 053 072 101 102 134 139MGA 045 046 059MINOLTA 013 020MITSUBISHI 013 020 045 046 051 059 061 049MTC 034 040MULTITECH 024 034NEC 012 023 039 043 048NORDMENDE 043OPTONICA 053 054BRAND CODE NUMBERSDVD (continued) - Laser Disc PlayersBRAND CODE NUMBERSVCR - VCRs
48ORION 025PANASONIC 066 070 083 133 140 074PENTAX 013 020 031 063PHILCO 031 034 067PHILIPS 031 034 054 067 071 101PILOT 101PIONEER 013 021 048PORTLAND 108PULSAR 072QUARTZ 002 014QUASAR 066 075RADIO SHACK 123RCA 013 020 041 107 109 140 034 040 REALISTIC 003 008 010 014 031 034 040 053 054 101RICO 058SALORA 014SAMSUNG 032 040 066 102 104 107 109 112 113 115 120 122 125SANSUI 022 043 048 135SANYO 003 007 010 014 134 102SCOTT 017 037 112 129 131SEARS 003 008 009 010 013 014 081 101 017 073 112SHARP 031 054 SHINTOM 024SIGNATURE 034SONY 003 031 052 056 057 058 076 077 078SOUNDESIGN 034STS 013SYLVANIA 031 034 059 067SYMPHONIC 034TANDY 010 034TATUNG 039 043TEAC 034 039 043TECHNICS 031 070TEKNIKA 019 031 034 101THOMAS 034TMK 006TOSHIBA 008 013 042 047 059 079 082 112 131 081TOTEVISION 040 101UNITECH 040VECTOR RESEARCH012VICTOR 048VIDEO CONCEPTS 012 034 046VIDEOSONIC 040WARDS 003 013 017 024 031 034 040 053 054 131YAMAHA 012 034 039 043ZENITH 034 048 056 058 072 080 101 DAEWOO                   005 117FUNAI                    034GOLDSTAR                101 123BRAND CODE NUMBERSVCR (continued) - VCRs BRAND CODE NUMBERSVCR - TV/VCR Combos
49HITACHI                  034JCPENNEY                 101LG 101 123LLOYD                    034MAGNAVOX 034 067MEMOREX 101PANASONIC 070PHILIPS 034 067RADIO SHACK 123RCA 034SEARS 101SONY 057SYLVANIA 067SYMPHONIC 034THOMAS 034ZENITH 034ADC 007ADCOM 771 082 092 225 161 355 356 366AIWA 699 018 104 170 188AKAI 138 189AMC 038 125 126 127 128AMEND 054AMX 196ANGSTROM 142ANTHEM 337ARAGON 687 157 158 042 043 081 112ARCAM 418 419 504 590 591 592 793 794 141ATLANTIC TECHNOLOGY342AUDIO ACCESS 147AUDIO ALCHEMY 135AUDIO CONTROL 448 572AUDIO DESIGN ASSOCIATES194 011AUDIO EASE 021 196AUDIO FILE 071AUDIO MATRIX 167AUDIO RESEARCH399 406 423 424 425 426 AUDIO TECHNICA 134B & K 801 802 803 804 805BEL CANTO 747 748 789 790BOSE 409 459 460 070 170 347BOSTON ACOUSTICS447BRIX 555BRYSTON 551 023CAMBRIDGE AUDIO522 523 524 525 630 683 684 552CARVER 006 027 028 061 071 180 185 022 029 077CARY AUDIO DESIGN757 759 443 519CASIO 076CHIRO 140CINEMA SOUND 034 134BRAND CODE NUMBERSAUDIO - Amps, Preamps and A/V ReceiversBRAND CODE NUMBERSVCR (continued) - TV/VCR Combos
50BRAND CODE NUMBERSAUDIO (continued) - Amps, Preamps and A/V ReceiversCITATION 148CLASSE 537 410 411 484CLARION 026COLORADO VNET 539CURTIS MATHES 076DELPHI 415 515 614DENON 811 812 820 821 822 002 034 109 027 037 259 340 349 400 402 422 564 601602 649 678 679 700 809 810EAD 099 098EIGER 149ELAN 057 290 468 469 470 471 472 481 482 483 508 509ESCIENT 368 381 451FANFARE 352FISHER 047 180 182 297FLEXTRONICS 378FOSGATE 062 342GE 056GOLDSTAR 008HAFLER 174HARMAN KARDON 153 154 118 121 317 318 365HITACHI 020INKEL 197INSIGNIA 589 682INTEGRA 781 782 784 354 438 439 440 441 442 486 570 584 696 785 786 JAMO 398 799JBL 263 621JCPENNEY 076JENSEN 058JVC 743 163 191 114 389 390KENWOOD 420 517 550 026 066 145 146 181 190 197 192 182 199 151 222 180 005 367374 412 413KINERGETICS 140KLEGG 686KLIPSCH 157 158 042 043 081 112 687KNOLL 531KOSS 573KRELL 624 672 674 150 072 376 384 499 500KYOCERA 007LEXICON 120 357 360 364 837 838 839LINN 761 763 764 124 377LUXMAN 137 139 052 165 115 004 009LXI 076 056MAGNAVOX 086 164 152MARANTZ 488 492 493 563 721 722 725 726 728 744 754 770 779 780 006 028 031 040063 185 186 119 289 385MCINTOSH 496MCS 076MERIDIAN 628 100 012 013MICRO LAB 394MICROMEGA 119MONDIAL 157 158 042 043 081 112MOTOROLA 386MUSICAL FIDELITY 407 408 647 648MYRYAD 293 455 457NAD 603 186 113 478 479 598NAIM 533 534 535
51BRAND CODE NUMBERSAUDIO (continued) - Amps, Preamps and A/V ReceiversNAKAMICHI 111 172 183 287NEC 176NETSTREAMS 616 620NEXUS AUDIO 749 750 751NHT 691NILES 403NIRO 343NUFORCE 766NUVO 404 405 606 607 608 609 610OLIVE 584ONKYO 781 782 784 017 046 064 107 108 187 079 080 090 179 275 438 439 440 441442 486 536 552 629 786OPTIMUS 026 041 138OUTLAW 342PANASONIC 797 798 032 195 177 292 383 516 626 627PARASOUND 553 129 130 132 294 295 333 334PASS LABS 431PHAST 196PHILIPS 690 063 119 296PIONEER 823 827 828 545 546 556 014 033 039 044 045 050 069 159 168 116 035 078198 397 480 513 518 520 521 542 PLINIUS 458POLKAUDIO 685 709 710 829 830 514 029PRIMARE 461 462 463 464 465PROCEED 144QUAD 526RCA 549 010 048 117 156 067REALISTIC 019 056 073 075 095REQUEST 731 732 733 351 511 611ROKU 506 507REVOX 162ROTEL 501 502 503 654 074 083 085 RUSSOUND 527 379 391 392 445 446SAMSUNG 016 571 653SANSUI 040 048 110 119 065SANYO 047 059SCOTT 019 091SEARS 076SHARP 652 026 051 094 131 175 181SHERWOOD 388 447 562 682 024 038 055 102 103 105 106 051 030SIRIUS 585 555 767SIMAUDIO 449SLIM DEVICES 512SONANCE 775 776 777SONY 901 902 703 631 693 018 084 093 223 160 166 015 101 184 353 369 372 380395 417 421 574 SOUNDESIGN 036SOUNDSTREAM 084 088SOUNDMATTERS 375SPEAKERCRAFT 508 509 741 742SSI 068STS 007SUGDEN 430SUMO 171SUNFIRE 344 345 346 494 495SYSTEMLINE 759 760
52TAEKWANG 138TEAC 005 019 049 111TECHNICS 122 176 193 178 177 262THETA DIGITAL 136TOSHIBA 060 087 198 510TURTLE BEACH 416WARDS 180XANTECH 508 509XM SATELLITE RADIO614 415 514 515 556YAMAHA 831 026 169 067 123 133 173 264 089 332 373 427 428 432 434 436 540 541557 558 561 565 566 581 583 599 600 643 644 655 661 662 663 664 665 667668 669 676 711 715 717 720 461 740 752 753 897YBA 485ZENITH 143ZON 587ARCAM 504 591BOSE 170DELPHI 415 515FANFARE 352KENWOOD 550MYRYAD 457NAD 113NAIM 535NUVO 404 405 606 607 MUSICAL FIDELITY408 648PIONEER 556POLKAUDIO 514PRIMARE 465RUSSOUND 445 446 SIRIUS 585 555SONY 380XM SATELLITE RADIO415 514 515ALPHASTAR 123AMPLICA 050ASTON 206ATLANTA DTH 203BIRDVIEW 129 113 051 126BSR 053CABLEVISION 148CAPETRONICS 053CHANNEL MASTER013 014 015 018 036 055CHAPARRAL 008 009 012 077BRAND CODE NUMBERSAUDIO (continued) - Amps, Preamps and A/V ReceiversBRAND CODE NUMBERSAUDIO - XM Radios & TunersBRAND CODE NUMBERSSAT - Satellite Receivers
53CITOH 054COOLSAT 211CURTIS MATHES 050DISH NETWORK 122 167 168DIRECTV 173 193 220 221 223 224 225 226 227 228DRAKE 005 006 007 010 011 112 116 141 052DREAM MULTIMEDIA191 205DX ANTENNA 024 046 056 076ECHOSTAR 038 040 057 058 093 094 095 096 097 098 099 100 122 167 168ELECTROHOME 089EURO PLUS 114EUROSAT 114EXPRESSVU 122FORTEC STAR 177 178FUJITSU 017 021 022 027 133 134GE 151 106 150GENERAL INSTRUMENT003 004 016 029 031 059 101 148GOI 122HITACHI 139 140HIRSCHMANN 202HOME CABLE 080 044 029HOUSTON TRACKER033 037 039 104 057 051HTS 122HUGHES 068 154 161 162 165 166 220 221 223 224 225 226 227 228HYTEK 053HYUNDAI 149ICR 023JANIEL 060 147JERROLD 148JVC 122KATHREIN 108KPN 208LEGEND 057LG 170LUXOR 144 062MACOM 010 059 063 064 065MARANTZ 152 153MEMOREX 057MICRONIK MULTIMEDIA207MITSUBISHI 068 154MOTOROLA 148 171NEXT LEVEL 148NEXTWAVE 028 124 125NFUSION 192NORSAT 069 070NTL 209NV 195 196 197PACE 143 173PANASONIC 142 060PANSAT 121 172PERSONAL CABLE117PHILIPS 201 071 152 153 068 154 156PL 023 026PRESIDENT 019 102PRIMESTAR 110 030PROSAT 072BRAND CODE NUMBERSSAT (continued) - Satellite Receivers
54PROSCAN 151 106 150RADIOSHACK 148RCA 151 106 150REALISTIC 043 074SAB 195 196 197 198 199 200SAMSUNG 155 123 163 169 179SATCRUISER 192SATELLITE SERVICE028 035 047 085SKY 171 204 230SONY 103 104STARCAST 041STAR CHOICE 148SUPERGUIDE 020 124 125TEECOM 023 026 075 087 088 090 107 130 137TOSHIBA 002 127 157 158 068 154TOWN & COUNTRY023 026UNIDEN 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136VIEWSTAR 115VOOM 148WINEGARD 128 146ZENITH 081 082 083 084 091 120 159ADCOM 062 042AIWA 012 059 065 088 089 105 122 170 187AKAI 085 195 202AMC 231 232AMEND 118ARCAM 238 275AUDIO ACCESS 119 147AUDIO EASE 165AUDIO TECHNICA 046BEL CANTO 227BSR 037 057CALIFORNIA AUDIO103 008CAMBRIDGE AUDIO268CAPETRONIC 063CARRERA 057 080CARVER 185 041 044 050 086 107 130 134 135 138 139 203 204 167CASIO 111 182CARY AUDIO DESIGN261 262 289 290 291 292CLASSE 267CLARINETTE 182CREEK 159CROWN 035DCS 294DENON 002 123 281EMERSON 042 069 102FISHER 050 185 134 008FRABA 111GENEXXA 010 069 102BRAND CODE NUMBERSSAT (continued) - Satellite ReceiversBRAND CODE NUMBERSCD - CD Players and Changers
55GOLDSTAR 080HAITAI 093HARMAN KARDON272 018 033 047 208HITACHI 042 175INKEL 130 143 144INSIGNIA 298INTEGRA 030 273JCPENNEY 014 061 092 141JENSEN 158JVC 004 022 136 163 213 214 242 243 286KENWOOD 185 007 023 055 071 072 142 137 254KOSS 061KRELL 241 279 285 302KYOCERA 005LINN 295LOTTE 102LUXMAN 011 028 070 076 249 252LXI 059MAGNAVOX 044 107MARANTZ 246 274 296 297 027 041 044 051 077 107 209MCINTOSH 301 212 247MCS 014 073 092MEMOREX 010MISSION 044 107MITSUBISHI 179MITSUMI 153MODULAIRE 182MONDIAL 147MUSICAL FIDELITY258 284MYRYAD 244 265NAD 006 005 067 178 293NAKAMICHI 217 218 219 095NEC 014 062NIKKO 046NSM 044 107ONKYO 030 038 039 168 169 273OPTIMUS 010 050 057 058 081 082 083 085 093 195PANASONIC 103 201 172 008 068 248PARASOUND 233 240PHILIPS 041 044 107 246 253PIONEER 010 020 025 056 174 175 176 257 263PLINIUS 288PRIMARE 266PROCEED 239PROTON 044 107 228QUAD 269QUASAR 103 008RADIO SHACK 182RCA 017 042 150 276REALISTIC 042 050 051 102 181 182 187ROTEL 044 107 161 178 250SAE 044 107SANSUI 044 069 107 128 171 190 125SANYO 050SCOTT 069 102SHARP 026 031 051 066BRAND CODE NUMBERSCD (continued) - CD Players and Changers
56SHERWOOD 003 019 051 096 112 115 119 166SIGNATURE 033SIMAUDIO 280SONY 048 081 097 126 133 177 225 226 164 229 230 259 260 277 278SOUNDESIGN 251SUGDEN 264SUMO 155SYLVANIA 044 107SYMPHONIC 052 181TAEKWANG 195 085TANDY 010TEAC 015 034 036 051 052 101 131 140 079 145TECHNICS 060 103 200 172 184 008 068TECHWOOD 076THETA DIGITAL 234 235 270TOSHIBA 006 067 091 160 148VECTOR RESEARCH080VICTOR 004 022 114 124WARDS 185 033YAMAHA 024 046 054 186 183 236 282 283 287YORX 182DIRECTV 117 121 122 123 124 125 126 127 128HUGHES 117 121 122 123 124 125 126 127 128HUMAX 118 121 122 123 124 125 126 127 128PHILIPS 090 117 121 122 123 124 125 126 127 128PIONEER 117 118 121 122 123 124 125 126 127 128RCA 109REPLAY TV 075SONY 104 105 131TIVO 090 117 118 121 122 123 124 125 126 127 128UNIVERSAL REMOTE CONTROL574 575 573 571 5723M 152AIWA 164APPLE 401 412 476ARCHER 155ARTEC 586ATON 578 579 580 618AUDIO AUTHORITY427 428AURORA 300AUTON 434 191AURORA MULTIMEDIA220AVERMEDIA 437 460BRAND CODE NUMBERSCD (continued) - CD Players and ChangersBRAND CODE NUMBERSDVR - Digital Video Recorders (TiVo, Replay) BRAND CODE NUMBERSAUX - Custom Installation Products
57BRAND CODE NUMBERSAUX (continued) - Custom Installation ProductsBEDIENUNGSANLEITUNG221BOSE 409CASTI 587CHANNEL VISION 561 562 563 564CHIEF 556CLO SYSTEMS 556COMPONEXX 591CONTROL4 495CRAIG 588D-BOX 440DCS 468 469 470DDI 403DELL 261DENON 559DIGITAL STREAM 609DLINK 435 479DLO 418DMX 156DRAPER SCREEN 204DREAMVISION 097DVDO 299 423 576 577DWIN 080ELAN 451 452 453 454 455 456 457 458 441 442 443 444 445 446 447 448 449 521522 538 541 542 543 544 545 546 547 548ELECTROKINETICS438ELGATO 478ELITE SCREENS 431 432EVERQUEST 206EXTRON 151 433FARENHEIT 430FAROUDJA 184FOCAL 436FUJI 209FUZE MEDIA SYSTEMS558GATEWAY 261GRIDLINK 592GRIFFIN 471HAUPPAUGE 294 295HP 481 252 261HUNTER DOUGLAS219IHOME 555INET ACCESS 589INSIGNIA 299 567INTEGRA 439IOGEAR 407IPORT 419JERROLD 153JVC 185 416K2 MOUNTS 556KALEIDESCAPE 259 459KENSINGTON 406KENWOOD 185KEY DIGITAL 461 462 464 465 551 463 595KEYSPAN 297KLIPSCH 425LASONIC 592
58BRAND CODE NUMBERSAUX (continued) - Custom Installation ProductsLG 296LINKSYS 270 566LUMAGEN 472LUTRON 417LUXOM 424MAGNAVOX 584MAKITA 186 201MARANTZ 450MICROSOFT 408 481 107 252 261MINDPATH 205NETGEAR 477NILES 160 187 272NSM 161NTI 421NYKO 554ONKYO 439OMNIMOUNT 552PEERLESS 556PHILCO 584PIANO DISC 085PINNACLE 405POLKAUDIO 557 539 540 162PRIMARE 402PSYCLONE 480RCA 258 585ROKU 565RUNCO 466RUSSOUND 081SAGETV 549SANSONIC 592SCIENTIFIC ATLANTA156 163SHERWOOD 467SIMA 082 429SKARDIN 610SOLO ELECTRONICS207SOMFY 411 078 079SONANCE 419SONY 554 414 164 165 166 271 261SPEAKERCRAFT 473 474STARCOM 153TEN TECHNOLOGY401TIVAX 589 590TURBOSCAN 167VELODYNE 413 203VUDU 553VUTEC 560WURLITZER 410XANTECH 420 426 168 169 170 171 172 276 277 278 279 280 282 283 284 285 286 287288 289 290 291 292 293ZINWELL 591 593ZENITH 567ZENTECH 610
59DELL 261GATEWAY 261HAUPPAUGE 294 295HP 252 261 KEYSPAN 297MICROSOFT 252 261 SONY 261 271MICROSOFT/XBOX 107 408SONY 414APPLE/iPod 401 412BOSE 409DLO 418IPORT 419KENSINGTON 406SONANCE 419TEN TECHNOLOGY401AIWA 015 071 100 114CARVER 006 008 027 024 036 137DENON 105 227 229FISHER 064GOLDSTAR 011HARMAN KARDON233JVC 106 116 239 240KENWOOD 005 013 023 026 064 145 146 181 190LINN 124LUXMAN 035 137 139MAGNAVOX 027MARANTZ 014 027 056 065 087MCINTOSH 238MITSUBISHI 242 243NAD 029 048NAKAMICHI 244 245 025ONKYO 002 012 016 017 018 019 115OPTIMUS 026 054 055PANASONIC 007 010 032 088 195BRAND CODE NUMBERSAUX - Media PC ControlsBRAND CODE NUMBERSAUX - GAME SystemsBRAND CODE NUMBERSAUX - iPod ControlsBRAND CODE NUMBERSAUX - Tape Decks
60BRAND CODE NUMBERSAUX (continued) - Tape Decks PHILIPS 027 087PIONEER 003 039 047 050 066 098 222QUASAR 007 088SANSUI 027 113 119 224SHARP 026 057 131 175 181SHERWOOD 038 004 028 030 033 034SONY 020 022 052 084 089TEAC 009 059 212TECHNICS 007 010 076 088 109 122 193TOSHIBA 112VICTOR 106YAMAHA 021 026 031 067 040COLORADO VNET311 312LEVITON 321LITE TOUCH 208 212LIGHTOLIER CONTROLS307LUTRON 077 158 159 306 308 309 340 341RAKO 301 302 303 304 305WATT STOPPER 319 320X-10 093 183 257XANTECH 188 189BRAND CODE NUMBERSAUX - Lighting Systems
61Frequently Asked QuestionsWhat is a “macro” button?It is an MX-350 button you set to make a lot of things happen when youpress it. For example, to watch a DVD in most home theaters requiresseveral remote controls and many button presses (power up the TV,power up the surround sound, power up the DVD player, set the TV tothe correct video input, set the surround sound to the correct audioinput and finally; press play on the DVD player remote control).Instead of pressing all of those buttons one at a time, the MX-350 enablesyou to setup one button that does it all automatically with one press.For more information on how and why you should setup macro andfavorite channel buttons, read pages 19-22.If the batteries run out, will I lose my settings?No. The MX-350 stores all of your settings in non-volatile FLASH memory.You could remove the batteries for months, replace them at your con-venience and the MX-350 would still remember your settings.Who can I call for more answers?The Universal Remote Control technical support and customer servicestaff are ready to answer any questions you might have. Call us at 1-914-835-4484Monday - Friday, 9AM to 6PM (EST) The MX-350
62USALimited Warranty StatementYour Universal Remote Control, when delivered to you in new condition,is warrantedagainst defects in materials or workmanship as follows:UNIVERSALREMOTE CONTROL,INC. warrants this product againstdefects in material or workmanship for a period of one(1) year and as setforth below. Universal Remote Control will, at its sole option, repairtheproduct using new or comparable rebuilt parts, or exchange the productfor a comparablenew or rebuilt product. In the event of a defect, these areyour exclusive remedies.This Limited Warranty covers only the hardware components packagedwith the Product. Itdoes not cover technical assistance for hardware orsoftware usage and it does not coverany software products whether or notcontained in the Product; any such software is pro-vided "AS IS" unlessexpressly provided for in any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freight prepaid,in its originalpackaging or packaging affording adequate protection toUniversal Remote Control at theaddress provided in the Owner's Manual.It is your responsibility to backup any macroprogramming, artwork,software or other materials that may have been programmed intoyour unit.It is likely that such data, software, or other materials will be lost duringserviceand Universal Remote Control will not be responsible for any suchdamage or loss. Adated purchase receipt, Bill of Sale, Installation Contractor other verifiable Proof ofPurchase  is required. For product support andother important information visit UniversalRemote Control's website:http://www.UniversalRemoteControl.com or call the UniversalRemoteControl Customer Service Center (914) 835-4484.This Limited Warranty only covers product issues caused by defects inmaterial or work-manship during ordinary consumer use. It does not coverproduct issues caused by anyother reason, including but not limited toproduct issues due to commercial use, acts ofGod, third-party installation,misuse, limitations of technology, or modification of or to anypart of theUniversal Remote Control product. This Limited Warranty does notcoverUniversal Remote Control products sold as USED, AS IS,REFURBISHED, so-called "BSTOCK"  or consumables (such as batteries).This Limited Warranty is invalid if the factory-applied serial number hasUniversal Remote Control, Inc.
63Universal Remote Control, Inc.been altered or removed from the product. This LimitedWarranty is validonly in the United States of America. This Limited Warrantyspecificallyexcludes products sold by unauthorized resellers.UNIVERSALREMOTE CONTROLSHALLNOT BE LIABLE FORANYINCIDENTALORCONSEQUENTIALDAMAGES FOR BREACH OFANYEXPRESS OR IMPLIED WARRANTYOR CONDITION ON THISPRODUCT. EXCEPT TO THE EXTENT PROHIBITED BYAPPLICABLELAW, THERE IS NO OTHER WARRANTYEXPRESSED OR IMPLIED.UNIVER-SALREMOTE CONTROLWILLNOT BE HELD RESPONSIBLEFOR STATEMENTS MADEBYOTHERS CONCERNING THEMERCHANTABILITYOR FITNESS FOR APARTICULARPURPOSE ONTHIS PRODUCT. Some states or jurisdictions do not allow the exclusionorlimitation of incidental or consequential damages, or allow limitationson how long animplied warranty lasts, so the above limitations orexclusions may not apply to you. ThisLimited Warranty gives youspecific legal rights and you may have other rights which varyfrom stateto state or jurisdiction to jurisdiction.SpecificationsLearning Capability - 784 IR commands at standard frequencies (15KHz to 455 KHz)Macro Capability - 472 Macros of up to 190 steps eachIR Range (Line of Sight via Infrared): 30-50 feet, depending on the envi-ronmentRF Range (radio frequency): 50 to 100 feet, depending upon the envi-ronmentRF Frequency: 418MHzWeight: 8 oz. (with batteries)Size: 8.5” x 2 7/16” x 1”Batteries: Four AAA Alkaline batteries includedLCD Size: approximately 7/8” x 1-7/8”
64Universal Remote Control, Inc.Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one moreof the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning!Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interference caused byunauthorized modifications to this equipment. Such modifications could void the user'sauthority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.Any changes or modifications not expressly approved by the party responsible forcompliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.
65NOTE
OCE-0024B  REV. 09500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532

Navigation menu