Ohsung Electronics URCMX350-N RF Remote Controller User Manual I User s Manual

Ohsung Electronics Co., Ltd. RF Remote Controller I User s Manual

Contents

User Manual

Download: Ohsung Electronics URCMX350-N RF Remote Controller User Manual I User s Manual
Mirror Download [FCC.gov]Ohsung Electronics URCMX350-N RF Remote Controller User Manual I User s Manual
Document ID1388174
Application IDrbnUbVAsapILCGLV9Z37Dg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize107.62kB (1345208 bits)
Date Submitted2010-12-09 00:00:00
Date Available2011-01-23 00:00:00
Creation Date2010-12-03 18:45:07
Producing SoftwareAcrobat Distiller 9.4.0 (Windows)
Document Lastmod2010-12-07 19:26:21
Document TitleMicrosoft Word - I_User_s Manual.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: C7F6C1A4

Order Number
: GETEC-C1-10-200
FCC Certification
Test Report Number
: GETEC-E3-10-107
Page 1 / 1
APPENDIX I
: USER’S MANUAL
EUT Type: RF Remote Controller
FCC ID.: OZ5URCMX350-N
Owner’s
Manual
Thank You!
Thank you for purchasing the MX-350 TM Pre-Programmed and
Learning Remote Control. This manual is designed to assist you
step-by-step as you setup the MX-350 to replace all of your
remote controls and automate your home entertainment system.
MX-350 Owner’s Manual © 2004 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may be copied or reproduced
in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior
notice. MX-350 is a registered trademark of Universal Remote Control, Inc. Power of Simple is a trademark of
Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of
their respective companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
Table of Contents
Getting Started
Button Layout
Basic Setup
Pre-Programmed Method
Learning Method
Volume Control Punch Through
12
Advanced Operation
14
Advanced Setup
16
Editing Button Labels
16
Macro Button Setup
19
Favorite Channel Setup
21
Hiding and Adding Pages
23
Erasing
25
Cloning One MX-350 to Another
26
Recalling Pre-Programmed Settings
27
Utilizing Optional RF Base Stations
28
IR/RF Signal Setting
31
ID # - Setting Base Station Address
33
EMITT - Setting IR Emitter Outputs
34
BLAST - Setting the Front Panel Blaster On or Off
35
Pre-Programmed Code Tables
37
Frequently Asked Questions
61
Warranty
62
Specifications
63
Federal Communication Commission Interference Statement
64
The MX-350
Getting Started
Congratulations!
You’ve purchased one of the most advanced and easy to setup control systems available. The MX-350’s built-in library includes thousands of different
brands and models of remote controls. In most systems, all you have to do
to setup the MX-350 is enter which brands and models you own. If you own
a component too new to be in the library, the MX-350 uses advanced learning technology to quickly set each MX-350 button, one at at time. Setting up
your MX-350 to replace all your existing remote controls can be done in a
few minutes. Basic Setup is described on pages 5 to 13.
The MX-350’s exciting advanced features automate and customize operation
in many ways. You could use Macro Setup to power on all of your components and start the show with the press of one button! With the MX-350’s
unique Favorite Channel capability, you can tune in a channel with the
press of one button instead of entering the entire channel number. Any of
the button names on the display can be edited as you like. It is best to
delay any Advanced Setup (described on pages 14 to 36) until after you
finish Basic Setup.
Battery Installation
Remove the battery compartment cover by pressing up the cover lock.
Insert four AAA batteries into the battery compartment as shown in the
diagram.
- +
+ - +
+ -
Universal Remote Control, Inc.
Button Layout
Transmitting
“Busy” Signal
Indicator*
TITLE
FAVORITE
CHANNEL
Button
LIGHT
Button
PAGE
Buttons
change the
page of
Display
Buttons.
Screen
Labeled
Display
Buttons
PAGE
Numbers
MAIN
Button
takes you
to the
MAIN
Menu.
FUNCTION
Buttons
*Note: When a command, macro or favorite channel is being transmitted, an icon will appear
in the top right corner of the display. While the MX-350 is “busy”, it will ignore a button push.
The MX-350
Selecting a New DEVICE Changes
All Button Commands Instantly
The MX-350 can operate ten different devices even though it is only one
remote control. Let’s try it now! Press the MAIN button, then press the TV
DEVICE button.
TV
DEVICE
Button
MAIN
Button
The top of the screen changes from MAIN to TV. Now all of the buttons
change their function to operate a TV. Press the page buttons. Watch the
labels of the display buttons change with each press. There are eight pages
of display buttons already labeled for TV operation. To operate another
component (e.g., VCR, DVD etc.), press the MAIN button to return to the
MAIN menu. The MAIN menu displays five of your Devices on the
screen. Simply press one of the screen-labeled Device buttons to operate
another device. If you don’t see the device name you want, then use the
PAGE buttons to display the remaining five devices on page 2 of the
MAIN menu.
Light Button
Press the LIGHT button to backlight all the buttons. To turn off the backlighting, press the LIGHT button again, or just wait ten seconds (the backlighting automatically shuts itself off).
LIGHT
Button
Universal Remote Control, Inc.
Basic Setup
You can start setting up your MX-350 using either the Pre-Programmed
Method or the Learning Method. However, all the buttons of the MX-350 are
setup at once with the Pre-Programmed Method, so it is usually faster than
the one-button-at-a-time Learning Method.
Pre-Programmed Method
Power on the A/V component you wish to setup, so that you can test
codes by sending power off commands.
Refer to the pre-programmed code tables on pages 38 - 59 and
write down the code numbers listed for your A/V component. The
code numbers are listed by categories of devices, then by brand.
See page 37 for a category list.
Press and hold both the MAIN and ENT (Enter) buttons for approximately three seconds. The top of the display will show “SETUP”.
You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in SETUP mode. If
you don’t press a button within that time, the MX-350 will time out and return to
normal operation.
MAIN
Button
ENT
Button
The MX-350
Press the P-PRO button to select the Pre-Programmed Method.
P-PRO
Button
The display changes so that you can select which Device button to
setup.
First
Five
Device
Names
Press a Page button to display the
other five Device names.
In this step you choose the name of the device you’d like to setup.
Use the cursor UP or DOWN buttons to change the flashing name.
When it is correct, press the SELECT button.
UP
SELECT
DOWN
For Example: I wanted to setup the TV Device button first, so I pressed the
cursor UP or DOWN until “TV” was flashing in the display.
The bottom of the display will flash “FROM TABLE”.
Universal Remote Control, Inc.
In this step you verify the type of component you plan to operate
with this device button. If the flashing name is correct, press
SELECT.
SELECT
If the name flashing in the display is incorrect (for example, you are setting up
AUX to operate a Laser Disc Player), use the UP and DOWN buttons to
change the flashing name to the correct type of component.
Note: Each name that appears in the display may include several types of
components. For example, the DVD category includes DVD players and
Laser Disc Players. See page 37 for a list of component types each Code
Table contains.
Point the MX-350 at the component, then enter the first three digit
code number from your notes using the numbered buttons. After
you enter each three digit number, look at the component to see if
it turned off.
Use the
number
buttons to
enter the
code
number.
Continue to enter code numbers until the component powers off.
For Example: I have a Sony TV. I found the code numbers 070, 139,147,
126, 185, 194 and 085 under Sony in the TV TABLE. Using the numbered
buttons on the MX-350, I entered 070 and looked at the TV. It didn’t turn off,
so I entered 139, then 147 and so on, until I found the code that powered
off the TV.
The MX-350
Note: If a component fails to turn off after you have entered all of the code
numbers listed for your brand, you can scan through the other brands in the
table using the UP and DOWN buttons (there is a chance that your
component was actually manufactured by another brand). However, most of
the code tables are so large it is usually faster to use the Learning Method on
Page 9.
Scan Up to the next Code
Number
Scan Down to the previous
Code Number
Press Power On or Power
Off to test if the device
powers off.
When the component turns off, save the code number you entered
by pressing the SAVE button that appears on the screen.
Code
Number
You
Entered
SAVE
Button
Exit SETUP mode by pressing the MAIN button two times. When
the display shows “MAIN”, you are back in normal operating
mode.
MAIN
Button
Universal Remote Control, Inc.
10
Repeat steps one through nine for each of your devices. If you are
missing any commands, use the learning method, described next
Learning Method
The MX-350 can learn commands from your old remote controls one-button-at-a-time by following these simple steps:
Line-up the MX-350 with your old remote control, head-to-head,
one or two inches apart.
On the MX-350, press and hold the MAIN and ENT (Enter) buttons at
the same time for approximately three seconds. The top of the display will show “SETUP”. You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in SETUP mode. If
you don’t press a button within that time, the MX-350 will time out and return to
normal operation.
Press the LEARN button.
LEARN
Button
The top of the screen will change to “LEARN”.
The MX-350
The display will show a list of the first five devices.
Select the device you would like to teach commands to by pressing
the Device button.
Press any
of the
Device
Buttons.
Now, press any button you want to teach a command to.
Press
any
Button.
Note: If you don’t see the display button you would like to teach, use the
PAGE buttons. The only buttons you can’t teach are the PAGE and MAIN buttons.
Once you press a button, the top of the display will change from
“LEARN” to “READY”.
10
Universal Remote Control, Inc.
Press and hold the button you want on your old remote control until
the display changes to either “GOOD” or “FAILED”.
If the “GOOD” label appears on top of the display, you were successful.
Now, press the next button you wish to teach. Keep repeating steps 6
through 7 until you have learned all the buttons you want.
If the “FAILED” label appears on top of the display, try to teach the
same button in MX-350 once again by repeating steps 6-7.
Continue to teach any commands from any of your remote controls
by repeating steps 5-7 (to go back to step five, press MAIN once).
Once you completed teaching all the buttons, return to normal operation by pressing the MAIN button twice. Test all your new commands.
If any of them don’t work, try learning again using these notes:
Move to another room. Plasma TVs, sunlight, halogen or
quartz lighting can interfere with the learning process.
Although the old remote control seems to work fine,
change the batteries to fresh alkaline batteries.
Vary the distance between the remote controls
gradually. Try 1/4”, 1”, 2”and so on, up to 4 feet.
Tap the button on the original remote control instead of
pressing and holding it during the learning process.
11
The MX-350
Volume Control Punch Through
In most home entertainment systems, the sound volume is only controlled by one device. In some systems, it is the TV speakers that make
the sound, so you would use the TV device on the MX-350 to raise and
lower the volume. In another system, it might be a surround sound
receiver and speakers that control the sound, so you would use the
MX-350’s AUDIO device to adjust the volume. Constantly switching the
MX-350 to TV or AUDIO to adjust the volume is inconvenient in daily
life.
You can use Punch Through to set the MX-350’s volume buttons to always
control the sound in your system. That way when the MX-350 is set to
VCR or DVD, the volume up, down and mute buttons will work perfectly without switching back to AUDIO or TV. Here’s how:
Enter Setup mode by pressing and holding both MAIN and ENT for
three seconds. The top of the display show you are in SETUP mode
now.
Note: You have 30 seconds for each step, otherwise the MX-350 will time
out automatically.
Press the PAGE UP button to get to page 2 of the SETUP menu.
Press the PUNCH button.
Press the VOL button. The display confirms by displaying “VOL” at the
top of the screen. This sets up the group of three buttons (Volume Up,
Volume Down and Mute) in one action!
Select
Volume
The bottom of the display flashes ”PUNCH TO”.
12
Universal Remote Control, Inc.
Press the device button for the device that doesn’t have volume
control commands yet (i.e.,DVD). This is the device you are going
to PUNCH TO for the volume and mute commands.
Select
the Device
you want to
“Punch To”
Note: If you wish to PUNCH to the MAIN device, press the POWER OFF
button at this time.
The bottom of the display will then flash “PUNCH FROM”. Now
you select the device that has the volume commands you want
(i.e.,TV for systems using the TV speakers, AUDIO for systems with
surround sound receivers). The bottom of the
display will flash “SAVED”.
Repeat steps 3-5 until all your devices operate the volume perfectly. Press the MAIN button twice to return to normal operating
mode and test your Punch Through settings.
Note: The Punch Through feature is not limited to
volume and can also be applied to channel or other functions. If you find
yourself switching to a particular device frequently to use a group of controls, consider using Punch Through for another group, as listed here:
VOL - Volume Up, Volume Down and Mute
CH - Channel Up, Channel Down, Prev. Channel and Number buttons (0-9, +10, ENT)
PLAY - Play, Stop, Pause, Rewind and Fast Forward
VOD - Guide, Menu, Info, Exit, Up, Down, Left, Right, Sel
POWER - Power On and Power Off
13
The MX-350
Advanced Operation
Setting Backlight Options
You can adjust the amount of time that the MX-350 backlight stays on by
entering the SETUP mode and proceeding to page two (using the PAGE
UP button), then pressing the LIGHT button on the display (not the
Backlight button). Then enter the amount of time you would like the
light to stay on using the number pad (0-99 seconds). After making your
selection, press the SAVE button.
If you don’t want backlighting at all (this extends battery life), press the ON
button that appears on the screen. The ON will change to OFF. Press the
SAVE button. Exit the setup mode by pressing the MAIN button.
The FAV Button
When you press the FAV button, the display changes to a list of your
favorite TV channels. Each button can be set to instantly select the channel
on your TV. There are eight pages of five favorite channel buttons for a total
of 40. Simply touch the PAGE buttons to display the other favorite channels. To return to the last device you viewed, press MAIN once (a second
press will take you to the MAIN menu).
FAV
Button
Favorite
Channel
Buttons
To setup your Favorite Channel buttons go to page 21.
14
Universal Remote Control, Inc.
Adjusting Contrast
You can make the text darker by pressing both the MAIN and cursor UP
buttons at the same time. To make the text appear lighter, press both the
MAIN and cursor DOWN buttons at the same time.
MAIN
Button
Cursor
Up & Down
Buttons
Contrast set low.
Contrast set high.
Transmitting (Busy Signal) Icon
When a command is being transmitted, an icon will appear in
the top right corner of the display. It is a useful aid when setting
up Macros and FAVs, since it flashes with every step of a
sequence of commands.
15
The MX-350
Advanced Setup
After you’ve finished all your basic setup, you can choose to make operation easier by customizing the MX-350 just the way you want, using the
Advanced Setup features described in this section.
Editing Button Labels
You can change the name of any of the display buttons (including
Favorite Channels) by following these steps:
Press and hold both the MAIN and ENT (Enter) buttons for approximately three seconds. The top of the display will show “SETUP”.
You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in SETUP mode. If you don’t
press a button within that time, the MX-350 will time out and return to normal operation.
Press the EDIT button.
EDIT
Button
The display changes to the EDIT menu. Press the TEXT button.
TEXT
Button
The screen displays the list of devices and “EDIT” will appear at
the top of the screen. Navigate to the device and page where there
is a button label you want to EDIT, selecting between the FAV,
MAIN, DEVICE, then using the PAGE button.
16
Universal Remote Control, Inc.
Press the button you wish to edit. The first character of your button
label blinks.
Blinking
Character
EDIT flashes at the bottom of the screen.
Change the character by
using any of the number
keys. Each press of the
same number button selects
the next character of that
number’s group, as shown
here.
A,B,C,1
J,K,L,4
S,T,U,7
D,E,F,2
M,N,O,5
V,W,X,8
G,H,I,3
P,Q,R,6
Y,Z,9
Once the character you
want appears, move to the
next space by pressing the
RIGHT cursor button.
UP Cursor
button deletes ALL text.
LEFT Cursor
button
moves blinking
character left.
RIGHT Cursor
button
moves blinking
character right.
DOWN Cursor
button deletes the currently
blinking character.
17
The MX-350
When you are finished editing the button, press the button you
edited and “SAVED” will flash at the bottom of the display.
To change any other button labels on the same device, press the next
button, then repeat steps 6-8. If you wish to edit a button on another
device, press the MAIN button once, then repeat Steps 4-8.
Once you’ve finished editing buttons, press the MAIN button four
times to return to normal operation.
Edit the MAIN Menu Title or a MAIN Menu Device Label
You can change the title of the MAIN Menu or a MAIN Menu device
label by following these steps after you’ve entered TEXT Edit mode
(described in the steps one through four in the preceding pages).
Once you’ve entered TEXT Edit mode, the top of the screen displays
EDIT and the first five devices of the MAIN Menu. There are five
pages you can access via the Page UP or DOWN buttons. When the
top of the screen says EDIT, pressing a device button jumps to the pages for
that device so that you can edit a device’s LCD buttons normally. However,
if you continue to tap the Page button, the top of the screen will change
from EDIT to MAIN. While it says MAIN, there are three pages of LCD buttons. The first two list the Devices of the MAIN Menu and enable you to
change the device names when pressed. The third page titled MAIN has only
one entry for the LCD buttons; “MAIN”. When you press the corresponding
hard button, you can relable the MAIN title itself.
Select the title to edit by pressing the adjacent hard button.
Edit the text (described on steps 5 and 6 on page 17).
Press the button you edited to save the changes. Here’s an example:
The MAIN Menu
title has been
changed to PATIO,
so whenever the
MAIN button is
pressed, the user is
reminded that this is
the Patio remote.
Each of the MAIN
menu device buttons has been custom labeled for
the activities the
user likes to use
out on the Patio.
18
Universal Remote Control, Inc.
Macro Button Setup
Imagine turning on your TV, your DVD player and your surround sound
receiver by pressing a single button on your MX-350! What would normally take three remotes and three button pushes, the MX-350 can
accomplish with the press of one button. We call that a “Macro”. Any
of the Display buttons, the Power On or the Power Off buttons (on any
Device or Page) can be set to be Macro buttons!
To setup a macro button, follow these easy steps:
Enter the SETUP mode by pressing and holding both MAIN and
ENT for three seconds.
Note: You have 30 seconds for each step, otherwise the MX-350 will time
out automatically.
Press the MACRO button. The top of the display will show
“MACRO”. The bottom of the display will flash “SELECT”.
Navigate to the Device and Page where there is a button you would
like to set as a Macro button using the MAIN, DEVICE, and PAGE buttons.
Advanced Options:
If you wish to set one of the DEVICE buttons as a macro, on step 3, press the
Page Up button twice. The top of the display changes to MAIN, and you can
navigate to MAIN page 1 or page 2 before going on to Step 4.
Another option for DEVICE button macros is to only send the macro if the button is pressed and held. This is setup by entering a delay as the first step of the
macro. The amount of delay determines how long the user must press the button before the macro is sent. The advantage of this option is that a normal
press of the DEVICE button will simply switch devices without issuing the
macro.
Press the button you want to set as a Macro button. The top of the
screen will display the label of the button you selected. At the bottom of the screen it displays “STEP0”, indicating that no macro
steps have been entered yet.
19
The MX-350
Navigate to the Device and Page that has a button you want in your
macro using the MAIN, DEVICE and PAGE buttons. Then press the
button with the command you want. Whenever a button is pressed,
another Macro step is counted and displayed at the bottom of the
screen.
Don’t worry about the number of steps. Each macro button can
store up to 190 steps, so you are not likely to run out of steps!
Note: You can program delays in between commands by pressing the
PAUSE button. Each press adds half a second to the delay.
Press the LIGHT button to end your macro. A new screen displays
three choices:
SAVE
Button
SAVE — If you are happy with your macro, press the
SAVE button.
UNDO — The UNDO button lets you erase the last step.
EXIT — The EXIT button erases all the macro steps.
Press the MAIN button twice to return to normal operation.
20
Universal Remote Control, Inc.
Favorite Channel Setup
Imagine surfing all your favorite channels, without ever typing in a
channel number. By simply setting up each of the favorite channel buttons, you can make TV, cable or satellite operation fun and easy. To
setup a Favorite Channel button, follow these steps:
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the MX-350 will time
out automatically.
Press the FAV display button.
FAV
Button
The top of the display will show “FAV”. The bottom of the display
will flash “SELECT”.
Use the Page buttons until you can see the name (i.e., ABC, CBS,
NBC) of the favorite channel you wish to setup.
Press the favorite channel button you wish to setup. The top of the
screen changes to show the channel name. The bottom of the
screen displays “STEP0”, indicating that you have not entered the
channel number yet.
Press either the TV, SAT or CABLE Device button (select the device you
use to enter channel numbers).
Press each of the number buttons for the channel.
Note: Some brands of television require an ENT(Enter) command after the
channel numbers.
21
The MX-350
Note: If a number is repeated when setting the channel (for example,channel
“33” or “522”) it is usually best to set a half second delay in between the
identical numbers by pressing the PAUSE button. Each press of the PAUSE
button increases the delay by a half second.
Use the PAUSE Button to set
delays between steps, each press
of the pause button increases the
delay by a half second.
Press the LIGHT button after you enter the
channel number. A new screen appears:
SAVE
Button
To save the channel you entered, press the SAVE button. The
UNDO button lets you erase the last entry. The EXIT button erases
all entries for this button.
When you are finished setting up Favorite Channel buttons, press
the MAIN button twice to return to normal operation.
22
Universal Remote Control, Inc.
Hiding and Adding Pages
Each of your MX-350 Devices contains up to eight pages (if a page has no
IR data, it will be HIDDEN). However, you can HIDE any page from the
users view. A hidden page still appears in SETUP modes, so can be used
in macros. If you change your mind and would like the user to see a
hidden page, you can ADD them. You can add or hide pages on devices,
or on your favorite channel pages using this simple process:
Note: Be sure to program your Macros before you hide pages with a potential macro step in them. You can’t access hidden pages during macro setup.
However, after you finish Macro setup, you can hide pages without affecting operation of your macros.
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the MX-350 will time out
automatically.
Press the EDIT button.
EDIT
Button
Press the PAGE button.
PAGE
Button
“PAGE” appears at the top of the screen.
23
The MX-350
Navigate to any page, using the MAIN, DEVICE, FAV, and PAGE buttons.
FAV
Button
DEVICE
Buttons
PAGE
Buttons
MAIN
Button
When you select a page, the top of the screen
indicates whether you want to “ADD?” or “HIDE?” the page displayed. When you would like to change a page’s visibility, press the
LIGHT button.
This page is hidden.
To ADD it, press the
LIGHT button.
This page is visible.
To HIDE it, press the
LIGHT button.
You can continue to ADD or HIDE pages on other devices by repeating Steps 4 and 5.
When you are finished adding and hiding pages, press the MAIN button four times to return to normal operation.
24
Universal Remote Control, Inc.
Erasing
You can erase an individual button with a learned command, a macro
or a favorite channel. You can erase an entire Device’s learned command or macro buttons. You can also erase ALL your learned commands on all devices or all your macros or favorite channels everywhere. If you really want a fresh start, it is possible to reset everything to
the factory default condition.
Erasing Learned Buttons, Macros or Favs
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note : You have 30 seconds for each step, otherwise the MX-350 will time
out automatically.
Press a PAGE button to display page two of Setup.
Press the ERASE button.
Press either the LEARN, MACRO or FAV button.
The following screen appears:
ALL — If you press ALL, the MX-350 displays a SURE? button. After the SURE
button is pressed, all the buttons will be erased.
DEVICE— If you press DEVICE, a list of Devices will appear. Press the
device button that you wish to erase. The bottom of the screen
will flash ERASE twice, then ERASED.
KEY— If you press KEY, you’ll have to navigate to the Device and Page
you want using the MAIN, DEVICE and PAGE buttons. Press a
button to erase it. The bottom of the display will flash ERASE
twice, then ERASED.
To return to normal operating mode, press the MAIN button four times.
25
The MX-350
Erasing the Entire MX-350
To erase EVERYTHING, press and hold both the MAIN and the STOP
buttons for 15 seconds. After 15 seconds, the RESET screen appears.
Press the SURE button to erase all of your settings and return to the factory default setup.
SURE
Button
Cloning One MX-350 to Another
If you own two or more MX-350, you can copy and transfer all the setup
from one MX-350 to another. Just follow these easy steps:
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the MX-350 will time
out automatically.
Press a PAGE button to display page two of Setup.
Press the CLONE button.
Align the two MX-350 head-to-head, about an inch apart.
Press the RECV display button on the new MX-350 you would like to
setup by cloning.
Press the SEND display button on the MX-350 you previously setup.
Press the START button on the new MX-350 and then press the
START button on the MX-350 you previously setup.
Note: Cloning typically takes about 90 seconds.
After completion, the cloned MX-350 will flash “GOOD”.
Return to normal operation by pressing the MAIN button twice.
26
Universal Remote Control, Inc.
Recalling Pre-Programmed Settings
If you didn’t write down the code numbers you setup your MX-350 with,
you can recall them via this simple process:
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the MX-350 will time
out automatically.
Go to page two of the SETUP menu via the PAGE UP button.
Press the RECAL button. The display changes to the recall screens. The
screen automatically switches between four screens, alternately flashing page one devices and code numbers then those for page two.
Note: Pay attention to the page numbers on the bottom of the screen. Page
1 code numbers are the ones setup for the Page1 Devices. Page 2 code
numbers are the ones setup for the Page 2 Devices.
Write down the code numbers as they appear.
Return to normal operation by pressing the MAIN button twice.
27
The MX-350
Utilizing Optional RF Base Stations
You can use the MX-350 as you would your other remote controls. It transmits very powerful line-of-sight output using infrared light commands
(invisible to the naked eye). When you point the MX-350 at the components,
expect the range to be between 30 and 50 feet. When the remote is not
pointed in the general direction of the components, the range will vary
(depending on reflective surfaces, lighting, etc.).
However, the MX-350 also sends radio signals in every direction. By purchasing the MRF-100 or the addressable MRF-250 or MRF-350 base stations, you can operate your equipment with the MX-350 50 to 100 feet away
(through walls, doors, cabinets, inside or outside). Since the RF Base
Station picks up the MX-350's radio signals from any direction, regardless of
distance, the MX-350 doesn’t have to be pointed!
Using MRF-250 or MRF-350 Addressable Base Stations
By installing an MRF-250 or MRF-350 base station you gain freedom from
interference from a nearby room, house or condo where someone else
might be using an RF remote control. Addressable base stations are
assigned one of 15 unique ID#’s. This allows multiple equipment locations in one house to be controlled by any MX-350. In operation it’s simple:
when you select a device located in the Den, the MX-350 only talks to the
base station in the Den. When you select a device located in the Family
Room, the MX-350 only talks to it!
When used with an MRF-250 or MRF-350 base station, the MX-350 can be
programmed to control identical components, for example, a media room
array of TV’s . The intelligent routing of the MRF-250 or the MRF-350 base
station will send your commands only to the TV you want to control. The
other identical TV’s will not receive commands. Of course, if your system
utilizes identical satellite receivers, cable boxes, VCR’s or disc changers
you can utilize IR routing just as easily for them. If you have more than six
identical components, up to 15 addressable MRF-250’s or MRF-350’s can
be installed to control them (thus allowing up to 90 identical components
in one house).
Note: The MX-350's radio signals will not control components directly.
Components that came with "no pointing" radio remote controls cannot
be operated by the MX-350 unless the component can be switched to standard
28
Universal Remote Control, Inc.
The MX-350 sends radio signal to
the MRF-100, MRF-250 or the
MRF-350 RF Base Stations.
The RF Base Station converts radio signals to standard infrared commands and sends them out via a
built-in front blaster to components in the same
cabinet space.
Self-adhesive “flashers” (included with the MRF-250 or the
MRF-350) affix to the front panels of your components. The
flashers relay infrared commands to components out-of-sight of
the front blaster. The flashers plug into the rear flasher line output jacks. Each flasher has a 10’ cable to easily reach components on nearby shelves.
29
The MX-350
RF Settings Overview
The MX-350 is factory set to work out of the box with an MRF-100 base station, which is not addressable. The only setting that affects operation with
an MRF-100 is the RF/IR setting (to operate, the MX-350 must be set to IR/RF
or RF- it will not operate the MRF-100 in IR mode). The MX-350 will operate
with an MRF-250 or MRF-350 base station set to ID#0 with the factory
default settings. However, in order to gain the advantages of addressable
base stations (no interference between systems within one house or a
condo development with potential interference between two different condos, turning the front blaster on or off, or routing identical commands to a
stack of identical televisions or satellite receivers etc.) you must reset the
MX-350 and the Base Station ID# to any address other than ID#0. ID#0 is an
“open door” to any RF signal, it is not a true address. It is extremely useful
for testing whether any interference is present, since the base station’s STATUS LED will flicker if interference is present. Once the base station is
moved to a location where the LED does not flicker, the ID# can be
changed to one of the other addresses.
Note that ID#0 does not allow any emitter or blaster configuration. Before
changing any emitter or blaster settings, you must reset the ID# to an
address other than 0. Here are the factory default RF settings of the MX-350:
IR/RF (Type of Signal) - All devices are factory set to send both an IR line of
sight signal and an omnidirectional RF signal.
ID# (Base Station Address) - All devices are factory set with ID #0.
EMITT (IR Emitter Line Output) - All devices are factory set to output IR commands through ALL IR Emitter Line Outputs.
BLAST (Base Station Front Panel Blaster) - The blaster is factory set to be on.
Changing the RF Settings
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the MX-350 will time
out automatically.
Press the PAGE buttons until page three of Setup is displayed (RF is
the only choice on Page 3).
30
Universal Remote Control, Inc.
Press the RF button.
RF Button
The RF Settings Menu appears. See the notes on the following
pages for more info on each option. Make your selection by pressing the button you want:
Signal (IR, RF or Both)
Base Station ID #
Emitters - ALL or a specific Emitter
Blaster - Turn the Blaster On or Off
Exit this Menu
After you’ve made a new setting and SAVED your change, use the
EXIT button to return to the RF settings menu to change any other
setting. Once you are finished all settings, use the MAIN button to
return to normal operation
IR/RF Signal Setting
You can set the signal to be IR line-of-sight only, RF only or IR and RF
simultaneously. Additionally, you can set the signal the same way for ALL
ten of your devices OR you can set the signal differently for each device
(the plasma TV could be set to be IR line-of-sight only, while the DVD
player and the Satellite receiver are set to be RF only). A good reason to set
the signal to RF only is to prevent too much IR being sent to a sensitive
component from two arrivals at the front panel (one directly from the
MX-350, one from the RF base station). A good reason to set the signal to IR
only is that another room has an MRF-100 base station (no RF address) so
it will receive commands from the MX-350 unless it is set to IR only.
31
The MX-350
From the RF Settings Menu, select IR/RF.
Decide whether you are changing the Signal for all devices or just
one of the devices of the MX-350.
Select ALL to change the signal settings to ALL
devices in the MX-350. Then, go to Step 4.
Select DEVIC to change the signal settings to
just one of the devices in the MX-350. Then, go
to Step 3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change IR/RF settings, then go to Step 4.
Page
Buttons
display the
other page
of devices.
Select a device
Select the new setting by pressing the desired button, then press SAVE
to save your new setting and return to the RF settings menu.
Both IR and RF will be output
Only IR line-of-sight
Only RF will be output
Save the new setting
Exit this Menu without changing
the IR/RF settings
32
Universal Remote Control, Inc.
ID # - Setting Base Station Address
When you are installing a system within 100 feet of another equipment
location in the same home OR near a home, condo, yacht or motor
home that might potentially have an RF remote control of any kind, it is
recommended that you use an addressable base station and set the
address as described here.
You can operate up to 15 different equipment locations, each with an
MRF-250 or MRF-350 assigned a unique Receiver ID#. You program
each or all of your MX-350 devices to the appropriate equipment location
by assigning the corresponding ID# in the RF Settings Menus.
From the RF Settings Menu, select ID#.
Decide whether you are changing the ID# for all devices or just one
of the devices of the MX-350.
Select ALL to change the ID# for ALL devices
in the MX-350. Then, go to Step 4.
Select DEVIC to change the ID# for just one of
the devices in the MX-350. Then, go to Step 3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change the ID#,
then go to Step 4.
Page
Buttons
display the
other page
of devices.
Select a device
33
The MX-350
Select the new setting by pressing the desired button, then press SAVE
to save your new setting and return to the RF settings menu.
Displays the current ID#
Change the ID# to a higher number
Change the ID# to a lower number
Save the new setting
Exit this Menu without changing
the IR/RF settings
EMITT - Setting IR Emitter Outputs
The MRF-250 and MRF-350 Base Stations enable you to route or
steer the IR commands from any Device to any or all of the IR
Line Outputs. This allows you to control identical devices using
the exact same IR commands (such as an array of television sets
in a media room or a stack of identical satellite receivers installed
in a central location with one satellite receiver dedicated to each
room with a television). Each button push (or macro step) is routed to the specific IR Line Output you’ve assigned to a device. In
the factory set default settings, the MX-350 is set to route IR commands from any device to ALL IR Line Outputs simultaneously. To
change the MX-350 default settings follow these steps:
From the RF Settings Menu, select EMITT.
Decide whether you are changing the Emitter settings for all devices
or just one of the devices of the MX-350.
Select ALL to change the Emitter settings to
ALL devices in the MX-350. Then, go to Step 4.
Select DEVIC to change the Emitter settings to
just one of the devices in the MX-350. Then, go
to Step 3.
34
Universal Remote Control, Inc.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change the
Emitter settings, then go to Step 4.
Page
Buttons
display the
other page
of devices.
Select a device
Select the new setting by pressing the desired button, then press
SAVE to save your new setting and return to the RF settings menu.
Displays the Line Output # or ALL
Change the Line Output upwards
Change the Line Output downwards
Save the new setting
Exit this Menu without changing
the EMITT settings
BLAST - Setting the Front Panel Blaster On or Off
The MRF-250 and MRF-350 Base Stations have a configurable
front panel high power IR LED or “blaster” for controlling components in the same cabinet space without emitters attached to their
front panel. The front panel blaster can overpower or saturate the
sensors of some A/V components, so if intermittent operation
occurs, the blaster should be turned off.
The blaster is incompatible with a stack of identical components,
since all components will receive IR commands at once, no matter what device is selected. Turn off the front panel blaster by following the steps described on the next page:
35
The MX-350
From the RF Settings Menu, select BLAST.
Decide whether you are changing the Blaster for all devices or just
one of the devices of the MX-350.
Select ALL to change the blaster settings to
ALL devices in the MX-350. Then, go to Step 4.
Select DEVIC to change the blaster settings to
just one of the devices in the MX-350. Then, go
to Step 3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change IR/RF settings, then go to Step 4.
Page
Buttons
display the
other page
of devices.
Select a device
Select the new setting by pressing the desired button, then press SAVE
to save your new setting and return to the RF settings menu.
Turn Blaster ON.
Turn Blaster OFF.
Save the new setting
Exit this Menu without changing
the BLAST settings
36
Universal Remote Control, Inc.
Pre-Programmed Code Tables
The MX-350’s Pre-Programmed code library is divided into categories (TV, VCR,
AUX, etc.). Each category actually includes many types of components. For
example, the VCR category includes TV/VCR combo units.
Within each category, the code numbers are listed in rows by brand
(Sony, Panasonic, B & K, etc.). Some brands have more than one three
digit code for you to try. Just circle the correct row and refer to it while
you setup (step-by-step instructions for using Pre-Programmed codes are
found on page 5).
TV
TVs, Plasma/LCD TVs, Projectors and Monitors
CABLE Cable TV Descramblers/Tuners and WEBTVs
Pages 38-41
Pages 41-43
DVD
DVD Players, TV/DVD Combos, TV/DVD/VCR
Combos, DVD Recorders, and Laser Disc Players
Pages 43-47
VCR
VCRs and TV/VCR Combos
Pages 47-49
AUDIO Amps, Preamps, A/V Receivers and XM Radios
Pages 49-52
SAT
Satellite Receiver
Page 52-54
CD
CD Players and Changers
Pages 54-56
DVR
Digital Video Recorders (TiVo, Replay)
Page
AUX
Media PCs, GAME Systems, iPod,
TAPE Decks, Lighting Systems and Custom
Installation Products
37
56
Pages 56-60
TV - TVs, Plasmas, Projectors and Monitors
BRAND
CODE NUMBERS
ADMIRAL
ADVENT
AKAI
AMARK
AMPRO
AMSTRAD
ANAM
AOC
APEX DIGITAL
AQUAVISION
ASTAR
AUDIOVOX
AVENTURA
AVION
BENQ
BLAUPUNKT
BOXLIGHT
CAIRN
CANDLE
CAPEHART
CETRONIC
CITIZEN
CLASSIC
COBY
CONCERTO
CONTEC
CORONADO
CRAIG
CROWN
CURTIS MATHES
CXC
DAEWOO
DAYTRON
DELL
DIBOSS
DIGITAL PROJECTION
DREAMVISION
DURABRAND
DWIN
DYNASTY
DYNATECH
DYNEX
EIKI
ELECTROGRAPH
ELECTROHOME
ELEMENT
EMERSON
072 081 161 160
247 388
474 475 404 405 458 473 197 146 248
112 143
073 167 157 183
052
043 054 056 080 112 131
197 004 112 058
006 310
573 574
477
452 453 454 503 076 103 273 388
401
441
423 443
088
266
201
197 002 003 004
058
043
197 002 003 004 043 101 103 143
043
568
004
043 050 051
143
043 054
043 143
197 101 004 143
043
004 016 043 044 076 077 103 114 125 127 143 369
004 143
319 320 321
329
437 570
235 312 313 314 343 344 345
401
177 257
043
062
399 454
187
470 466
024 076 143 196
526
514 401 197 004 005 028 043 047 048 050 051 076 077 096 143 151 153 154
155
324 579 590
323
007 057
556 410 299 346 396 198 223 219 246
028 043 052 401
043
242 268
197 008 009 034 056 073 074 130 144 155 160 161 165 004 091 157 183
EPSON
ESA
FISHER
FUJITSU
FUNAI
FUTURETECH
GATEWAY
GE
38
TV (continued) - TVs, Plasmas, Projectors and Monitors
BRAND
CODE NUMBERS
GEM
GOLDSTAR
GRUNDIG
HAIER
HALL MARK
HANNSPREE
HISENSE
HITACHI
391
004 102 106 112 113 116 119 127 143
220 083
502 501
004
381
419 442
554 411 460 380 004 009 010 011 012 023 075 143 158 163 166 072 221 250
586 587 589
HP
421 316 327 378 379 481
HUMAX
518
HYUNDAI
337 338
ILO
472
INFINITY
164
INFOCUS
230 330 331 332 333 252 409 449 470 531 532 547 548 564
INSIGNIA
350 354 399 400 401 402 403 454 457
JBL
164
JCPENNEY
197 004 008 009 024 030 065 101 143 156 160
JENSEN
013
JVC
471 533 534 034 038 070 083 145 199 210 240 241 244 245 406 420 581
KEC
043
KENWOOD
197 070
KLEGG
466
KLOSS
002 059
KMC
143
KNOLL SYSTEMS 409 230
KONKA
457
KREISEN
530
KTV
197 043 143 154
LG
522 523 243 284 283 363 364 365 366 569 576 577
LODGENET
072
LOEWE
222 223 224 164 322 422
LOGIK
072
LUXMAN
004
LXI
166 007 015 052 081 160 164
MAGNAVOX
549 467 197 003 004 022 059 060 061 063 064 127 160 164 094 226 264 390
MARANTZ
535 536 537 538 539 540 558 559 560 561 562 563 197 164 184 397 281 584
MATSUI
164
MAXENT
242
MEMOREX
007 072 004
METZ
088
MGA
197 004 024 028 042
MINERVA
088
MINTEK
362
MISAKAI
401
MITSUBISHI
519 540 550 004 024 028 040 042 109 124 146 191 225 237 267 300 348 450
MTC
197 004 062 101
NAD
015 025
NEC
565 566 428 448 132 130 134 197 040 016 024 056 019 236 237 262 272 281
575
NIKO
527
NIKEI
043
NORCENT
367
NUVISION
351 567
OLEVIA
432 376 394 504
ONKING
043
39
TV (continued) - TVs, Plasmas, Projectors and Monitors
BRAND
CODE NUMBERS
ONWA
OPTOMA
OPTONICA
ORION
PANASONIC
PHILCO
PHILIPS
043
360 553 249 265 270
019 081
096
552 524 429 430 034 056 080 092 164 208 261 359 377 583
197 003 024 056 059 060 063 064 164 004
551 431 424 425 197 003 004 005 038 059 093 161 164 127 184 206 259 260
264 274 294
PHILIPS/MAGNAVOX 260 294
PIONEER
520 438 447 459 385 393 397 197 018 023 025 116 135 190 203 204 209 234
237 334 335 336 533 582
PLANAR
513
POLAROID
507 508 505 506 493 494 388 353 354 356
PORTLAND
077 004 143
PROJECTION DESIGN 545 546 417 418 541 542 543 544
PROSCAN
144 160 161 165 167
PROTON
004 058 131 143 171 173 193 392 571
PROTRON
392 398 498 499 500
PROVIEW
493
PROX
572
QUASAR
034 056 092
RADIO SHACK
019 043 143 004 127
RCA
160 161 165 065 156 144 197 004 023 024 056 074 152 333 585 588
REALISTIC
007 019 043 047
REVOLUTION HD 466
ROCTEC
186
RUNCO
395 414 415 416 476 168 169 178 179 180 181 182 183 073 157 340 341 342
SAMPO
197 058 004 202
SAMSUNG
516 517 427 434 461 462 463 464 004 050 089 101 105 127 143 160 211 228
229 253 254 258 309 578
SANSUI
399
SANYO
509 510 511 512 166 007 020 053 057 082 187 266
SCEPTRE
276
SCOTT
004 028 043 048 143 497
SEARS
015 030 004 007 028 057 143 094 160 082 165 166
SELECO
189 200 205
SHARP
496 555 214 251 306 307 308 326 468 170 081 019 028 029 014 004 022 143
175
SHERWOOD
349
SIEMENS
088
SIGNATURE
072
SIM2
313 205 200
SONY
521 412 444 445 446 491 070 085 139 147 126 185 194 207 213 277 278 279
SOUNDESIGN
004 028 003 043
SOYO
528
SPECTRICON
112
SPECTRONIQ
499 500
SSS
004 043
STARGATE
572
SUPERSCAN
401
SUPRE MACY
002
SVA
328
SYLVANIA
514 401 469 197 003 059 060 063 064 164 044 160 127 052
SYMPHONIC
052 401
SYNTAX OLEVIA 376 394 432 504
TANDY
081
40
TV (continued) - TVs, Plasmas, Projectors and Monitors
BRAND
CODE NUMBERS
TATUNG
TCL
TECHNICS
TECHVIEW
TECHWOOD
TEKNIKA
TELEFUNKEN
TELERENT
TERA
THOMPSON
TMK
TOSHIBA
056 062
426
034 080
557
004
002 003 004 024 028 043 072 101 143
037 046 086 087
072
172
215
004
480 455 456 465 007 015 030 040 062 101 138 216 287 290 291 230 288 289
292 293 315 237 325 382 479
TOTEVISION
143
TRUTECH
529
UNIVERSAL
008 009
VIDEO CONCEPTS 146
VIDIKRON
440 406 414 415 439 174 184 188 192 340 342 395
VIDTECH
004
VIEWSONIC
433 389 390 271 242
VIORE
472
VISCO
526 528
VITO
478
VIZIO
386 387
WARDS
004 008 009 019 028 060 061 063 064 072 074 143 164 034
WESTINGHOUSE 435 436 495 076 077 280
WINBOOK
339
YAMAHA
407 408 451 370 371 372 373 197 004
YORK
004
YUPITERU
043
ZENITH
368 522 072 073 095 103 157 183 217 243 282 283 284 285 363
ZONDA
112
CABLE - Cable Set Top Boxes
BRAND
ABC
ADB
ADELPHIA
ADVANCED NEWHOUSE
ALTRIO
AMERICAST
ANTRONIX
ARCHER
ARMSTRONG
AT&T
AT&T BROADBAND
ATLANTIC BROADBAND
BELL SOUTH
BLUE RIDGE
BRESNAN
BUCKEYE COMM
CABLEVISION
CODE NUMBERS
103 003 004 039 042 046 053
115
111 110 043 074
043
043
099
014
005 007 014
074
151
074
043 074
099
043 074
074
074
108 043 074
41
CABLE (continued) - Cable Set Top Boxes
BRAND
CENTURION
CENTURY
CHARTER
CISCO
CITIZEN
COGECO
COMBANO
COMCAST
COMSAT
COMTRONICS
COX DIGITAL CABLE
DIGEO
DIGICABLE
EAGLE
EASTERN
ELECTRICORD
GEMINI
GE
GENERAL INSTRUMENT
GNC
GOLDEN CHANNEL
HAMLIN
HITACHI
INSIGHT
JERROLD
M-NET
MAGNAVOX
MASSILLON
MEDIA ONE
MEDICOM
MEMOREX
MOTOROLA
MOVIE TIME
MOXI
NCTC
NOVAPLEX
NOW TV
NSC
OAK
PACE
PANASONIC
PARAGON
PHILIPS
PIONEER
PRUCER
PTS
PULSAR
QUEST
RCA
RCN
RECOTON
REGAL
REGENCY
RODGERS
SAMSUNG
SCIENTIFIC ATLANTA
CODE NUMBERS
092
007
111 110 043 074
113 151 043
007
074
080 081
110 043 074 113
074
030
043 074
153
101
020 030 040
057 066
032
008 054
072
103 002 003 004 008 009 010 069 074 104
099
030
049 050 055
103 055
074
103 002 003 004 008 009 010 069 074 104 109 110
037
010 012 064 079 094
074
107
074
052
151 152 110 111 112 120 103 002 003 004 008 009 010 069 074 104 109
028 032
111 153
074
092
114
015 028 038 071
031 037 053
043 074 113
044 047
052
006 012 013 020 085
103 034 051 063 076 105 043
059
011 071 074
052
112
047
074
098
049 050
057
043
123 030
123 043 003 011 041 042 045 046 151
42
CABLE (continued) - Cable Set Top Boxes
BRAND
SEREN
SERVICE ELECTRIC
SHAW
SIGECOM
SIGNAL
SIGNATURE
SL MARX
SONY
SPRUCER
STARCOM
STARGATE
SUSQUEHANNA
TADIRAN
TIMELESS
TIME WARNER
TOCOM
TOSHIBA
UNIKA
UNITED CABLE
UNIVERSAL
VIDEOTRON
VIEWSTAR
VERIZON
WIDE OPEN WEST
ZENITH
CODE NUMBERS
043
074
074
043
030
103
030
108
047 078
002 004 008 009
008 030 097 104
043 074
030
030
043 074
039 040 056
052
007 014
004 053
005 007 014 032 035
043
012 015 018 086 087 088 089
110 121
043 099
052 060 093 100
CABLE - WEBTVs
BRAND
ECHOSTAR
MITSUBISHI
SONY
PHILIPS/MAGNAVOX
CODE NUMBERS
106
102
096
095
DVD - DVD Players
BRAND
ADCOM
ALPINE
AKAI
APEX DIGITAL
ARCAM
AUDIOVOX
CALIFORNIA AUDIO
CAMBRIDGE AUDIO
CARY AUDIO DESIGN
CLASSE
COBY
CYBERHOME
DENON
CODE NUMBERS
157
098
281
111 112 115 116 236
122
284
021 124
215 323 333
174 312
167
258 260 326 327
271 313
329 007 080 173 287 288
43
DVD (continued) - DVD Players
BRAND
DP-1
DURABRAND
EMERSON
ESA
GATEWAY
GE
GRADIENTE
GRUNDIG
GO VIDEO
HARMAN KARDON
HITACHI
FUNAI
ILO
INSIGNIA
INTEGRA
JVC
KENWOOD
KISS
KLH
KRELL
LECSON
LEXICON
LG
LINN
LITEON
MAGNAVOX
MALATA
MARANTZ
MCINTOSH
MEMOREX
MERIDIAN
MINTEK
MITSUBISHI
MYRYAD
NAD
NAKAMICHI
ONKYO
OPPO
PANASONIC
PARASOUND
PHILIPS
PIONEER
POLKAUDIO
POLAROID
PRIMARE
PROCEED
PROSCAN
RCA
RJTECH
ROTEL
SAMSUNG
SANSUI
SANYO
SENSORY SCIENCE
SHARP
SHERWOOD
CODE NUMBERS
190
143
143
143
175
026 027
021
083
137 091 220 221 222
084 140
101
143
268
292 143 297 322 331
324 142 180 192 280 338
302 012
123 151
279
135
104
126
305 148
303 321 322 091 057 074
306 309
320 264 265
096 066 143 282
267
083 105 201 202 315 332
125
163
153
111 282
017
134 102
278 088 155
103
324 314 274 280 076 035 180 338
266 311 312
289 285 205 198 199 021 042 139 144 150
245
317 276 277 066 095 105 166 176
303 304 305 172 213 283 092 099 107 108 131 162 337
083
235 236 237 284 295 296 297
193 194
086
026 027
290 307 026 027 273
269
335 336
275 301 200 056 070 119 137 159 165 170
154
147
223 222
325 094
245 246 247 248 249 250
44
DVD (continued) - DVD Players
BRAND
SONY
SPECTRONIQ
SUPERSCAN
SV2000
SYLVANIA
SYMPHONIC
TAG MCLAREN
TEAC
THOMPSON
THULE
TOSHIBA
TRUTECH
VENTURER
VINC
YAMAHA
ZENITH
CODE NUMBERS
286 033 118 126 145 160 189 191 238 239 240 241 242 243
310
143
143
143
143
156
270
026 027
177
273 298 300 319 035 034 128 141 130 164 187 188 214
293
149
161 308
042 089 066 158 166 195 196 197 328 334
057 074 091 182
DVD - TV/DVD Combos
BRAND
AUDIOVOX
COBI
DURABRAND
EMERSON
ESA
FUNAI
INSIGNIA
MINTEK
POLAROID
SAMSUNG
SV2000
SYLVANIA
SYMPHONIC
TRUTECH
TOSHIBA
CODE NUMBERS
284
327
143
143
143
143
143 292
282
284 295 296 297
165
143
143
143
293
130 300
DVD - TV/DVD/VCR Combos
BRAND
DURABRAND
EMERSON
ESA
INSIGNIA
MAGNAVOX
PANASONIC
POLAROID
SYLVANIA
SIMPHONIC
TOSHIBA
CODE NUMBERS
143
143
143
143
143
144 205
235
143
143
164 298
45
DVD - DVD/VCR Combos
BRAND
GO VIDEO
PANASONIC
PHILIPS
SAMSUNG
SANSUI
TOSHIBA
ZENITH
CODE NUMBERS
137
150
105 (VCR Functions for VCR 067)
137 159
154
141 187 214
091 182
DVD - DVD Recorders
BRAND
CYBERHOME
GATEWAY
GO VIDEO
ILO
KISS
LITEON
LG
ONKYO
PANASONIC
PHILIPS
PIONEER
SAMSUNG
SENSORY SCIENCE
SONY
TOSHIBA
ZENITH
CODE NUMBERS
271
175
220 221 222
268
279
265 320
303 321 322
324
139 289
176 277 317
172
301
222
191 238 239 240 241 242 243
188
182
DVD - Laser Disc Players
BRAND
DENON
FUNAI
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
OPTIMUS
PANASONIC
PHILIPS
PIONEER
RADIO SHACK
RCA
REALISTIC
RUNCO
SANYO
SHARP
SONY
TECHNICS
CODE NUMBERS
206 207
120
152 013
032 121
211
121
121
049 013
113
032
106 117 121
120
002
049
127
075
152 013
053 110
113
46
DVD (continued) - Laser Disc Players
BRAND
THETA DIGITAL
TOSHIBA
YAMAHA
CODE NUMBERS
032
152 106
043 129
VCR - VCRs
BRAND
AIWA
AKAI
AMPRO
ANAM
AUDIO DYNAMICS
BROOKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
DAYTRON
DBX
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GE
GO VIDEO
GOLDSTAR
HARMAN KARDON
HITACHI
INSTANTREPLAY
JCL
JCPENNEY
JENSEN
JVC
KENWOOD
LLOYD
LXI
MAGIN
MAGNAVOX
MARANTZ
MARTA
MATSUI
MEI
MEMOREX
MGA
MINOLTA
MITSUBISHI
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
CODE NUMBERS
034
016 043 046 124 125
072
031
012 023 039 043
035 037 129
028 031
108
003 040 135
031 041
005 007 010 065 108 110 111 112 116 117 119
108
012 023 039 043
034 053
059
005 006 017 025 027 029 031 034 035 036 037 046 101 116 129 131 138
003 008 009 010
034
031 063 072 107 109
132 136 040 115
012 013 020 101 106 114 123
012 045
004 018 026 034 043 063 137 013
031
031
012 013 015 040 066 101
043
012 031 043 048 050 055 060 130
014 048 034 047
034
003 009 017 034 106
040
031 034 041 067 068
012 031 067 069
101
027 030
031
003 010 014 031 034 053 072 101 102 134 139
045 046 059
013 020
013 020 045 046 051 059 061 049
034 040
024 034
012 023 039 043 048
043
053 054
47
VCR (continued) - VCRs
BRAND
ORION
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RADIO SHACK
RCA
REALISTIC
RICO
SALORA
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHINTOM
SIGNATURE
SONY
SOUNDESIGN
STS
SYLVANIA
SYMPHONIC
TANDY
TATUNG
TEAC
TECHNICS
TEKNIKA
THOMAS
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
CODE NUMBERS
025
066 070 083 133 140 074
013 020 031 063
031 034 067
031 034 054 067 071 101
101
013 021 048
108
072
002 014
066 075
123
013 020 041 107 109 140 034 040
003 008 010 014 031 034 040 053 054 101
058
014
032 040 066 102 104 107 109 112 113 115 120 122 125
022 043 048 135
003 007 010 014 134 102
017 037 112 129 131
003 008 009 010 013 014 081 101 017 073 112
031 054
024
034
003 031 052 056 057 058 076 077 078
034
013
031 034 059 067
034
010 034
039 043
034 039 043
031 070
019 031 034 101
034
006
008 013 042 047 059 079 082 112 131 081
040 101
040
012
048
012 034 046
040
003 013 017 024 031 034 040 053 054 131
012 034 039 043
034 048 056 058 072 080 101
VCR - TV/VCR Combos
BRAND
DAEWOO
FUNAI
GOLDSTAR
CODE NUMBERS
005 117
034
101 123
48
VCR (continued) - TV/VCR Combos
BRAND
HITACHI
JCPENNEY
LG
LLOYD
MAGNAVOX
MEMOREX
PANASONIC
PHILIPS
RADIO SHACK
RCA
SEARS
SONY
SYLVANIA
SYMPHONIC
THOMAS
ZENITH
CODE NUMBERS
034
101
101 123
034
034 067
101
070
034 067
123
034
101
057
067
034
034
034
AUDIO - Amps, Preamps and A/V Receivers
BRAND
ADC
ADCOM
AIWA
AKAI
AMC
AMEND
AMX
ANGSTROM
ANTHEM
ARAGON
ARCAM
ATLANTIC TECHNOLOGY
AUDIO ACCESS
AUDIO ALCHEMY
AUDIO CONTROL
AUDIO DESIGN ASSOCIATES
AUDIO EASE
AUDIO FILE
AUDIO MATRIX
AUDIO RESEARCH
AUDIO TECHNICA
B&K
BEL CANTO
BOSE
BOSTON ACOUSTICS
BRIX
BRYSTON
CAMBRIDGE AUDIO
CARVER
CARY AUDIO DESIGN
CASIO
CHIRO
CINEMA SOUND
CODE NUMBERS
007
771 082 092 225 161 355 356 366
699 018 104 170 188
138 189
038 125 126 127 128
054
196
142
337
687 157 158 042 043 081 112
418 419 504 590 591 592 793 794 141
342
147
135
448 572
194 011
021 196
071
167
399 406 423 424 425 426
134
801 802 803 804 805
747 748 789 790
409 459 460 070 170 347
447
555
551 023
522 523 524 525 630 683 684 552
006 027 028 061 071 180 185 022 029 077
757 759 443 519
076
140
034 134
49
AUDIO (continued) - Amps, Preamps and A/V Receivers
BRAND
CODE NUMBERS
CITATION
CLASSE
CLARION
COLORADO VNET
CURTIS MATHES
DELPHI
DENON
148
537 410 411 484
026
539
076
415 515 614
811 812 820 821 822 002 034 109 027 037 259 340 349 400 402 422 564 601
602 649 678 679 700 809 810
EAD
099 098
EIGER
149
ELAN
057 290 468 469 470 471 472 481 482 483 508 509
ESCIENT
368 381 451
FANFARE
352
FISHER
047 180 182 297
FLEXTRONICS
378
FOSGATE
062 342
GE
056
GOLDSTAR
008
HAFLER
174
HARMAN KARDON 153 154 118 121 317 318 365
HITACHI
020
INKEL
197
INSIGNIA
589 682
INTEGRA
781 782 784 354 438 439 440 441 442 486 570 584 696 785 786
JAMO
398 799
JBL
263 621
JCPENNEY
076
JENSEN
058
JVC
743 163 191 114 389 390
KENWOOD
420 517 550 026 066 145 146 181 190 197 192 182 199 151 222 180 005 367
374 412 413
KINERGETICS
140
KLEGG
686
KLIPSCH
157 158 042 043 081 112 687
KNOLL
531
KOSS
573
KRELL
624 672 674 150 072 376 384 499 500
KYOCERA
007
LEXICON
120 357 360 364 837 838 839
LINN
761 763 764 124 377
LUXMAN
137 139 052 165 115 004 009
LXI
076 056
MAGNAVOX
086 164 152
MARANTZ
488 492 493 563 721 722 725 726 728 744 754 770 779 780 006 028 031 040
063 185 186 119 289 385
MCINTOSH
496
MCS
076
MERIDIAN
628 100 012 013
MICRO LAB
394
MICROMEGA
119
MONDIAL
157 158 042 043 081 112
MOTOROLA
386
MUSICAL FIDELITY 407 408 647 648
MYRYAD
293 455 457
NAD
603 186 113 478 479 598
NAIM
533 534 535
50
AUDIO (continued) - Amps, Preamps and A/V Receivers
BRAND
CODE NUMBERS
NAKAMICHI
NEC
NETSTREAMS
NEXUS AUDIO
NHT
NILES
NIRO
NUFORCE
NUVO
OLIVE
ONKYO
111 172 183 287
176
616 620
749 750 751
691
403
343
766
404 405 606 607 608 609 610
584
781 782 784 017 046 064 107 108 187 079 080 090 179 275 438 439 440 441
442 486 536 552 629 786
OPTIMUS
026 041 138
OUTLAW
342
PANASONIC
797 798 032 195 177 292 383 516 626 627
PARASOUND
553 129 130 132 294 295 333 334
PASS LABS
431
PHAST
196
PHILIPS
690 063 119 296
PIONEER
823 827 828 545 546 556 014 033 039 044 045 050 069 159 168 116 035 078
198 397 480 513 518 520 521 542
PLINIUS
458
POLKAUDIO
685 709 710 829 830 514 029
PRIMARE
461 462 463 464 465
PROCEED
144
QUAD
526
RCA
549 010 048 117 156 067
REALISTIC
019 056 073 075 095
REQUEST
731 732 733 351 511 611
ROKU
506 507
REVOX
162
ROTEL
501 502 503 654 074 083 085
RUSSOUND
527 379 391 392 445 446
SAMSUNG
016 571 653
SANSUI
040 048 110 119 065
SANYO
047 059
SCOTT
019 091
SEARS
076
SHARP
652 026 051 094 131 175 181
SHERWOOD
388 447 562 682 024 038 055 102 103 105 106 051 030
SIRIUS
585 555 767
SIMAUDIO
449
SLIM DEVICES
512
SONANCE
775 776 777
SONY
901 902 703 631 693 018 084 093 223 160 166 015 101 184 353 369 372 380
395 417 421 574
SOUNDESIGN
036
SOUNDSTREAM 084 088
SOUNDMATTERS 375
SPEAKERCRAFT 508 509 741 742
SSI
068
STS
007
SUGDEN
430
SUMO
171
SUNFIRE
344 345 346 494 495
SYSTEMLINE
759 760
51
AUDIO (continued) - Amps, Preamps and A/V Receivers
BRAND
CODE NUMBERS
TAEKWANG
TEAC
TECHNICS
THETA DIGITAL
TOSHIBA
TURTLE BEACH
WARDS
XANTECH
XM SATELLITE RADIO
YAMAHA
138
005 019 049 111
122 176 193 178 177 262
136
060 087 198 510
416
180
508 509
614 415 514 515 556
831 026 169 067 123 133 173 264 089 332 373 427 428 432 434 436 540 541
557 558 561 565 566 581 583 599 600 643 644 655 661 662 663 664 665 667
668 669 676 711 715 717 720 461 740 752 753 897
485
143
587
YBA
ZENITH
ZON
AUDIO - XM Radios & Tuners
BRAND
ARCAM
BOSE
DELPHI
FANFARE
KENWOOD
MYRYAD
NAD
NAIM
NUVO
MUSICAL FIDELITY
PIONEER
POLKAUDIO
PRIMARE
RUSSOUND
SIRIUS
SONY
XM SATELLITE RADIO
CODE NUMBERS
504 591
170
415 515
352
550
457
113
535
404 405 606 607
408 648
556
514
465
445 446
585 555
380
415 514 515
SAT - Satellite Receivers
BRAND
ALPHASTAR
AMPLICA
ASTON
ATLANTA DTH
BIRDVIEW
BSR
CABLEVISION
CAPETRONICS
CHANNEL MASTER
CHAPARRAL
CODE NUMBERS
123
050
206
203
129 113 051 126
053
148
053
013 014 015 018 036 055
008 009 012 077
52
SAT (continued) - Satellite Receivers
BRAND
CITOH
COOLSAT
CURTIS MATHES
DISH NETWORK
DIRECTV
DRAKE
DREAM MULTIMEDIA
DX ANTENNA
ECHOSTAR
ELECTROHOME
EURO PLUS
EUROSAT
EXPRESSVU
FORTEC STAR
FUJITSU
GE
GENERAL INSTRUMENT
GOI
HITACHI
HIRSCHMANN
HOME CABLE
HOUSTON TRACKER
HTS
HUGHES
HYTEK
HYUNDAI
ICR
JANIEL
JERROLD
JVC
KATHREIN
KPN
LEGEND
LG
LUXOR
MACOM
MARANTZ
MEMOREX
MICRONIK MULTIMEDIA
MITSUBISHI
MOTOROLA
NEXT LEVEL
NEXTWAVE
NFUSION
NORSAT
NTL
NV
PACE
PANASONIC
PANSAT
PERSONAL CABLE
PHILIPS
PL
PRESIDENT
PRIMESTAR
PROSAT
CODE NUMBERS
054
211
050
122 167 168
173 193 220 221 223 224 225 226 227 228
005 006 007 010 011 112 116 141 052
191 205
024 046 056 076
038 040 057 058 093 094 095 096 097 098 099 100 122 167 168
089
114
114
122
177 178
017 021 022 027 133 134
151 106 150
003 004 016 029 031 059 101 148
122
139 140
202
080 044 029
033 037 039 104 057 051
122
068 154 161 162 165 166 220 221 223 224 225 226 227 228
053
149
023
060 147
148
122
108
208
057
170
144 062
010 059 063 064 065
152 153
057
207
068 154
148 171
148
028 124 125
192
069 070
209
195 196 197
143 173
142 060
121 172
117
201 071 152 153 068 154 156
023 026
019 102
110 030
072
53
SAT (continued) - Satellite Receivers
BRAND
PROSCAN
RADIOSHACK
RCA
REALISTIC
SAB
SAMSUNG
SATCRUISER
SATELLITE SERVICE
SKY
SONY
STARCAST
STAR CHOICE
SUPERGUIDE
TEECOM
TOSHIBA
TOWN & COUNTRY
UNIDEN
VIEWSTAR
VOOM
WINEGARD
ZENITH
CODE NUMBERS
151 106 150
148
151 106 150
043 074
195 196 197 198 199 200
155 123 163 169 179
192
028 035 047 085
171 204 230
103 104
041
148
020 124 125
023 026 075 087 088 090 107 130 137
002 127 157 158 068 154
023 026
016 025 042 043 044 045 048 049 078 079 080 086 101 135 136
115
148
128 146
081 082 083 084 091 120 159
CD - CD Players and Changers
BRAND
ADCOM
AIWA
AKAI
AMC
AMEND
ARCAM
AUDIO ACCESS
AUDIO EASE
AUDIO TECHNICA
BEL CANTO
BSR
CALIFORNIA AUDIO
CAMBRIDGE AUDIO
CAPETRONIC
CARRERA
CARVER
CASIO
CARY AUDIO DESIGN
CLASSE
CLARINETTE
CREEK
CROWN
DCS
DENON
EMERSON
FISHER
FRABA
GENEXXA
CODE NUMBERS
062 042
012 059 065 088 089 105 122 170 187
085 195 202
231 232
118
238 275
119 147
165
046
227
037 057
103 008
268
063
057 080
185 041 044 050 086 107 130 134 135 138 139 203 204 167
111 182
261 262 289 290 291 292
267
182
159
035
294
002 123 281
042 069 102
050 185 134 008
111
010 069 102
54
CD (continued) - CD Players and Changers
BRAND
GOLDSTAR
HAITAI
HARMAN KARDON
HITACHI
INKEL
INSIGNIA
INTEGRA
JCPENNEY
JENSEN
JVC
KENWOOD
KOSS
KRELL
KYOCERA
LINN
LOTTE
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MEMOREX
MISSION
MITSUBISHI
MITSUMI
MODULAIRE
MONDIAL
MUSICAL FIDELITY
MYRYAD
NAD
NAKAMICHI
NEC
NIKKO
NSM
ONKYO
OPTIMUS
PANASONIC
PARASOUND
PHILIPS
PIONEER
PLINIUS
PRIMARE
PROCEED
PROTON
QUAD
QUASAR
RADIO SHACK
RCA
REALISTIC
ROTEL
SAE
SANSUI
SANYO
SCOTT
SHARP
CODE NUMBERS
080
093
272 018 033 047 208
042 175
130 143 144
298
030 273
014 061 092 141
158
004 022 136 163 213 214 242 243 286
185 007 023 055 071 072 142 137 254
061
241 279 285 302
005
295
102
011 028 070 076 249 252
059
044 107
246 274 296 297 027 041 044 051 077 107 209
301 212 247
014 073 092
010
044 107
179
153
182
147
258 284
244 265
006 005 067 178 293
217 218 219 095
014 062
046
044 107
030 038 039 168 169 273
010 050 057 058 081 082 083 085 093 195
103 201 172 008 068 248
233 240
041 044 107 246 253
010 020 025 056 174 175 176 257 263
288
266
239
044 107 228
269
103 008
182
017 042 150 276
042 050 051 102 181 182 187
044 107 161 178 250
044 107
044 069 107 128 171 190 125
050
069 102
026 031 051 066
55
CD (continued) - CD Players and Changers
BRAND
CODE NUMBERS
SHERWOOD
SIGNATURE
SIMAUDIO
SONY
SOUNDESIGN
SUGDEN
SUMO
SYLVANIA
SYMPHONIC
TAEKWANG
TANDY
TEAC
TECHNICS
TECHWOOD
THETA DIGITAL
TOSHIBA
VECTOR RESEARCH
VICTOR
WARDS
YAMAHA
YORX
003 019 051 096 112 115 119 166
033
280
048 081 097 126 133 177 225 226 164 229 230 259 260 277 278
251
264
155
044 107
052 181
195 085
010
015 034 036 051 052 101 131 140 079 145
060 103 200 172 184 008 068
076
234 235 270
006 067 091 160 148
080
004 022 114 124
185 033
024 046 054 186 183 236 282 283 287
182
DVR - Digital Video Recorders (TiVo, Replay)
BRAND
CODE NUMBERS
DIRECTV
HUGHES
HUMAX
PHILIPS
PIONEER
RCA
REPLAY TV
SONY
TIVO
117 121 122 123 124 125 126 127 128
117 121 122 123 124 125 126 127 128
118 121 122 123 124 125 126 127 128
090 117 121 122 123 124 125 126 127 128
117 118 121 122 123 124 125 126 127 128
109
075
104 105 131
090 117 118 121 122 123 124 125 126 127 128
AUX - Custom Installation Products
BRAND
UNIVERSAL REMOTE CONTROL
3M
AIWA
APPLE
ARCHER
ARTEC
ATON
AUDIO AUTHORITY
AURORA
AUTON
AURORA MULTIMEDIA
AVERMEDIA
CODE NUMBERS
574 575 573 571 572
152
164
401 412 476
155
586
578 579 580 618
427 428
300
434 191
220
437 460
56
AUX (continued) - Custom Installation Products
BRAND
CODE NUMBERS
BEDIENUNGSANLEITUNG
BOSE
CASTI
CHANNEL VISION
CHIEF
CLO SYSTEMS
COMPONEXX
CONTROL4
CRAIG
D-BOX
DCS
DDI
DELL
DENON
DIGITAL STREAM
DLINK
DLO
DMX
DRAPER SCREEN
DREAMVISION
DVDO
DWIN
ELAN
221
409
587
561 562 563 564
556
556
591
495
588
440
468 469 470
403
261
559
609
435 479
418
156
204
097
299 423 576 577
080
451 452 453 454 455 456 457 458 441 442 443 444 445 446 447 448 449 521
522 538 541 542 543 544 545 546 547 548
ELECTROKINETICS 438
ELGATO
478
ELITE SCREENS
431 432
EVERQUEST
206
EXTRON
151 433
FARENHEIT
430
FAROUDJA
184
FOCAL
436
FUJI
209
FUZE MEDIA SYSTEMS 558
GATEWAY
261
GRIDLINK
592
GRIFFIN
471
HAUPPAUGE
294 295
HP
481 252 261
HUNTER DOUGLAS 219
IHOME
555
INET ACCESS
589
INSIGNIA
299 567
INTEGRA
439
IOGEAR
407
IPORT
419
JERROLD
153
JVC
185 416
K2 MOUNTS
556
KALEIDESCAPE
259 459
KENSINGTON
406
KENWOOD
185
KEY DIGITAL
461 462 464 465 551 463 595
KEYSPAN
297
KLIPSCH
425
LASONIC
592
57
AUX (continued) - Custom Installation Products
BRAND
CODE NUMBERS
LG
LINKSYS
LUMAGEN
LUTRON
LUXOM
MAGNAVOX
MAKITA
MARANTZ
MICROSOFT
MINDPATH
NETGEAR
NILES
NSM
NTI
NYKO
ONKYO
OMNIMOUNT
PEERLESS
PHILCO
PIANO DISC
PINNACLE
POLKAUDIO
PRIMARE
PSYCLONE
RCA
ROKU
RUNCO
RUSSOUND
SAGETV
SANSONIC
SCIENTIFIC ATLANTA
SHERWOOD
SIMA
SKARDIN
SOLO ELECTRONICS
SOMFY
SONANCE
SONY
SPEAKERCRAFT
STARCOM
TEN TECHNOLOGY
TIVAX
TURBOSCAN
VELODYNE
VUDU
VUTEC
WURLITZER
XANTECH
296
270 566
472
417
424
584
186 201
450
408 481 107 252 261
205
477
160 187 272
161
421
554
439
552
556
584
085
405
557 539 540 162
402
480
258 585
565
466
081
549
592
156 163
467
082 429
610
207
411 078 079
419
554 414 164 165 166 271 261
473 474
153
401
589 590
167
413 203
553
560
410
420 426 168 169 170 171 172 276 277 278 279 280 282 283 284 285 286 287
288 289 290 291 292 293
591 593
567
610
ZINWELL
ZENITH
ZENTECH
58
AUX - Media PC Controls
BRAND
DELL
GATEWAY
HAUPPAUGE
HP
KEYSPAN
MICROSOFT
SONY
CODE NUMBERS
261
261
294 295
252 261
297
252 261
261 271
AUX - GAME Systems
BRAND
CODE NUMBERS
MICROSOFT/XBOX 107 408
SONY
414
AUX - iPod Controls
BRAND
APPLE/iPod
BOSE
DLO
IPORT
KENSINGTON
SONANCE
TEN TECHNOLOGY
CODE NUMBERS
401 412
409
418
419
406
419
401
AUX - Tape Decks
BRAND
AIWA
CARVER
DENON
FISHER
GOLDSTAR
HARMAN KARDON
JVC
KENWOOD
LINN
LUXMAN
MAGNAVOX
MARANTZ
MCINTOSH
MITSUBISHI
NAD
NAKAMICHI
ONKYO
OPTIMUS
PANASONIC
CODE NUMBERS
015 071 100 114
006 008 027 024 036 137
105 227 229
064
011
233
106 116 239 240
005 013 023 026 064 145 146 181 190
124
035 137 139
027
014 027 056 065 087
238
242 243
029 048
244 245 025
002 012 016 017 018 019 115
026 054 055
007 010 032 088 195
59
AUX (continued) - Tape Decks
BRAND
PHILIPS
PIONEER
QUASAR
SANSUI
SHARP
SHERWOOD
SONY
TEAC
TECHNICS
TOSHIBA
VICTOR
YAMAHA
CODE NUMBERS
027 087
003 039 047 050 066 098 222
007 088
027 113 119 224
026 057 131 175 181
038 004 028 030 033 034
020 022 052 084 089
009 059 212
007 010 076 088 109 122 193
112
106
021 026 031 067 040
AUX - Lighting Systems
BRAND
COLORADO VNET
LEVITON
LITE TOUCH
LIGHTOLIER CONTROLS
LUTRON
RAKO
WATT STOPPER
X-10
XANTECH
CODE NUMBERS
311 312
321
208 212
307
077 158 159 306 308 309 340 341
301 302 303 304 305
319 320
093 183 257
188 189
60
The MX-350
Frequently Asked Questions
What is a “macro” button?
It is an MX-350 button you set to make a lot of things happen when you
press it. For example, to watch a DVD in most home theaters requires
several remote controls and many button presses (power up the TV,
power up the surround sound, power up the DVD player, set the TV to
the correct video input, set the surround sound to the correct audio
input and finally; press play on the DVD player remote control).
Instead of pressing all of those buttons one at a time, the MX-350 enables
you to setup one button that does it all automatically with one press.
For more information on how and why you should setup macro and
favorite channel buttons, read pages 19-22.
If the batteries run out, will I lose my settings?
No. The MX-350 stores all of your settings in non-volatile FLASH memory.
You could remove the batteries for months, replace them at your convenience and the MX-350 would still remember your settings.
Who can I call for more answers?
The Universal Remote Control technical support and customer service
staff are ready to answer any questions you might have.
Call us at 1-914-835-4484
Monday - Friday, 9AM to 6PM (EST)
61
Universal Remote Control, Inc.
USALimited Warranty Statement
Your Universal Remote Control, when delivered to you in new condition,
is warrantedagainst defects in materials or workmanship as follows:
UNIVERSALREMOTE CONTROL,INC. warrants this product against
defects in material or workmanship for a period of one(1) year and as set
forth below. Universal Remote Control will, at its sole option, repair
theproduct using new or comparable rebuilt parts, or exchange the product
for a comparablenew or rebuilt product. In the event of a defect, these are
your exclusive remedies.
This Limited Warranty covers only the hardware components packaged
with the Product. Itdoes not cover technical assistance for hardware or
software usage and it does not coverany software products whether or not
contained in the Product; any such software is pro-vided "AS IS" unless
expressly provided for in any enclosed software Limited Warranty.
To obtain warranty service, you must deliver the product, freight prepaid,
in its originalpackaging or packaging affording adequate protection to
Universal Remote Control at theaddress provided in the Owner's Manual.
It is your responsibility to backup any macroprogramming, artwork,
software or other materials that may have been programmed intoyour unit.
It is likely that such data, software, or other materials will be lost during
serviceand Universal Remote Control will not be responsible for any such
damage or loss. Adated purchase receipt, Bill of Sale, Installation Contract
or other verifiable Proof ofPurchase is required. For product support and
other important information visit UniversalRemote Control's website:
http://www.UniversalRemoteControl.com or call the UniversalRemote
Control Customer Service Center (914) 835-4484.
This Limited Warranty only covers product issues caused by defects in
material or work-manship during ordinary consumer use. It does not cover
product issues caused by anyother reason, including but not limited to
product issues due to commercial use, acts ofGod, third-party installation,
misuse, limitations of technology, or modification of or to anypart of the
Universal Remote Control product. This Limited Warranty does not
coverUniversal Remote Control products sold as USED, AS IS,
REFURBISHED, so-called "BSTOCK" or consumables (such as batteries).
This Limited Warranty is invalid if the factory-applied serial number has
62
Universal Remote Control, Inc.
been altered or removed from the product. This LimitedWarranty is valid
only in the United States of America. This Limited Warranty
specificallyexcludes products sold by unauthorized resellers.
UNIVERSALREMOTE CONTROLSHALLNOT BE LIABLE FOR
ANYINCIDENTALORCONSEQUENTIALDAMAGES FOR BREACH OF
ANYEXPRESS OR IMPLIED WARRANTYOR CONDITION ON THIS
PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BYAPPLICABLE
LAW, THERE IS NO OTHER WARRANTYEXPRESSED OR IMPLIED.
UNIVER-SALREMOTE CONTROLWILLNOT BE HELD RESPONSIBLE
FOR STATEMENTS MADEBYOTHERS CONCERNING THE
MERCHANTABILITYOR FITNESS FOR APARTICULARPURPOSE ON
THIS PRODUCT. Some states or jurisdictions do not allow the exclusion
orlimitation of incidental or consequential damages, or allow limitations
on how long animplied warranty lasts, so the above limitations or
exclusions may not apply to you. ThisLimited Warranty gives you
specific legal rights and you may have other rights which varyfrom state
to state or jurisdiction to jurisdiction.
Specifications
Learning Capability - 784 IR commands at standard
frequencies (15KHz to 455 KHz)
Macro Capability - 472 Macros of up to 190 steps each
IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 418MHz
Weight: 8 oz. (with batteries)
Size: 8.5” x 2 7/16” x 1”
Batteries: Four AAA Alkaline batteries included
LCD Size: approximately 7/8” x 1-7/8”
63
Universal Remote Control, Inc.
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one more
of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Warning!
Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
64
NOTE
65
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
OCE-0024B REV. 09

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Create Date                     : 2010:12:03 18:45:07+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:12:07 19:26:21-08:00
Metadata Date                   : 2010:12:07 19:26:21-08:00
Producer                        : Acrobat Distiller 9.4.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - I_User_s Manual.doc
Creator                         : 
Document ID                     : uuid:d4b891b0-c367-4986-8a99-2ff06116a005
Instance ID                     : uuid:928edbb6-1f45-46bc-92bb-f819f21baf1b
Page Count                      : 69
Author                          : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OZ5URCMX350-N

Navigation menu