Onity RFRCU RF ROOM CONTROL UNIT User Manual

Onity, Inc. RF ROOM CONTROL UNIT 04 0170 Manual

a href="https://usermanual.wiki/Onity" itemprop="url"> Onity >

USERS MANUAL

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 FCC Part 15.247 Certification Test Report FCC ID: R32-RFRCU FCC Rule Part: 15.247 ACS Report Number: 04-0170-15C Manufacturer: Onity, Inc. Equipment Type: Modular Radio Model: RFRCU Installation and Operators Guide
Onity, Inc. 2100A Nancy Hanks Drive. Norcross GA 30071 USA Phone 1-770-935-4228. Toll Free 1-866-to-Onity Fax1-770-488-6305. www.onity.biz EUT – Product Manual Room Control Unit The Room Control Unit (RCU) is the ‘brain’ of Onity’s new Wireless Energy Management System(EMS). It receives the temperature, humidity, guest settings, fan mode, motion status, and door status from the various system devices and determines how to operate the HVAC system and lighting control. The RCU has six relay drivers for outputs, a local door switch input, three setup buttons, three LED indicators, a local temperature sensor input, and a Real Time Clock (RTC) interface. The RCU receives transmissions from all the wireless devices via its on board radio. RCU Power Up When power is first supplied to the RCU, the three LEDs each flash once, the initial configuration check is started, and the 16 DIP Switch settings are read. These DIP Switch settings are ONLY read during the power up routine. Any changes made to these settings will not take effect until the unit is shut down and powered back up. If there is no response from the on board radio, the CFG LED (red) will flash. The unit will try once per second to communicate with the on board radio. As long as no communication is found, the red LED will continue to flash. BFR – Building, Floor, Room. The unique ID of the RCU. This ID is configured in all the devices that will transmit to this RCU.. If there is a response from the on board radio, the state of the LED will depend on whether or not the unit has been configured. If the unit has been configured with a valid BFR, the red LED will turn ON. If the unit has not yet been configured with a valid BFR, the red LED will turn OFF.
Download:
Mirror Download [FCC.gov]
Document ID461958
Application IDjNpFFGp8wxjFVYSF6IWIDQ==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize4.57kB (57169 bits)
Date Submitted2004-08-20 00:00:00
Date Available2004-08-20 00:00:00
Creation Date2004-08-11 14:22:51
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2004-08-11 14:48:57
Document TitleMicrosoft Word - 04-0170 Manual.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: Brooke Copeland
FCC ID Filing: R32-RFRCU

Navigation menu