Option OCF1 Wireless Pack User Manual CHAPTER1

Download:
Mirror Download [FCC.gov]
Document ID	164657
Application ID	owH1yBbg3OrbNIyoPWHDgg==
Document Description	Exhibit 8 Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.31kB (153825 bits)
Date Submitted	2001-08-15 00:00:00
Date Available	2001-10-19 00:00:00
Creation Date	2001-07-31 16:59:21
Producing Software	Acrobat PDFWriter 4.05 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	CHAPTER1.PDF
Document Creator	CHAPTER1.FM
Document Author:	stefand

Getting Started
Congratulations on the purchase of your new Compaq iPAQ
Pocket PC GSM/GPRS Wireless Data and Voice Pack. Your
Wireless Pack integrates the power of a state-of-the-art digital
mobile Wireless Pack with the simplicity of your Compaq iPAQ
handheld computer.
To use your Wireless Pack, you must first activate your account
with your network provider. See page 9 of this chapter.
Your account information is located on your SIM (Subscriber
Identity Module) card. If a SIM card did not come with your
Wireless Pack, your network provider will provide one when you
subscribe to their service. Your SIM card must be inserted into
your Wireless Pack before you can use it.
Just follow the seven easy steps in this chapter to get up and
running quickly.
Wireless Pack User’s Guide
1–1
Getting Started
Step 1: Setting up your handheld
computer
1. If you haven’t already set up your handheld, follow the steps
that came with your handheld to set it up.
2. (Recommended) Synchronize your handheld with your computer.
If you need additional information about synchronizing, refer to
the User manual that came with your handheld.
1–2
Wireless Pack User’s Guide
Getting Started
Step 2: Getting to know your Wireless
Pack
Wireless Pack User’s Guide
1–3
Getting Started
Jacket Components
Component
1–4
Function
Antenna
Receives and sends signals on
your Wireless Pack. The
antenna does not telescope out
of the Wireless Pack.
Audio jack
Enables you to connect a
headset so you can view your
handheld screen while you are
on a voice call.
Internal Battery
Battery is incorporated into the
sleeve and powers your
Wireless Pack.
Power
Turns on your Wireless Pack
and activates the signal.
Wireless Pack User’s Guide
Getting Started
Jacket Components
Component
Function
Power Button
Your Wireless Pack stays on
until you remove it from your
handheld or press the power
button to turn it off.
Speaker
Functions as the earpiece on
your Wireless Pack.
LED
Provides status information for
your Wireless Pack for GSM /
GPRS. The color of the light
and the blink state indicate the
status as follows:
Green/Blinking slow = On and
in service
No light = Off or battery
depleted
Red/Blinking slow = Low
battery voltage also shown in
WCS display
Red/solid = Charging
Green/solid = Charged
Green/Blinking fast =
Indicates SMS or Voicemail
message is waiting
Red/Blinking fast = Shows
unit is powered on but not
registered on network.
Wireless Pack User’s Guide
1–5
Getting Started
To adjust the volume during a voice call, press the scroll buttons
on the front of your handheld.
1–6
Wireless Pack User’s Guide
Getting Started
Step 3: Insert your SIM card
The SIM (Subscriber Identity Module) card is a small rectangular
plastic piece. The SIM card is included with your service
provider’s documentation and is often referred to as a
“smartcard”.
If your SIM card is already inserted in your Wireless Pack, skip
to Step 4.
Insert the SIM card into the slot.
Since calls are billed to your telephone number, you can move
your SIM card to any mobile device that uses a SIM card, and the
calls will be billed to your account.
Step 4: Connect the Wireless Pack to your
handheld
Slide the iPAQ into the Wireless Pack until it clicks into place.
The Pocket PC will alert you when the sleeve is ready to be used.
You can disable the sound made when you insert the iPAQ into
the Wireless Pack. Press the Qmenu button, tap Expansion Pack,
then select Disable Insertion Sound.
To view the Expansion Pack properties, press the Qmenu button,
then tap Expansion Pack. If the Expansion Pack is installed
properly, the name of the Expansion Pack will appear in the
Expansion Pack Properties screen.
Wireless Pack User’s Guide
1–7
Getting Started
To remove your Wireless Pack from your handheld, slide the
sleeve down and off your iPAQ.
1–8
Wireless Pack User’s Guide
Getting Started
Step 5: Charge the battery
1. Plug the travel charger into a wall outlet.
2. Insert the travel charger cable into the connector on your
handheld. You can also put your handheld with the Wireless
Pack into the cradle and insert the travel charger into the connector on the cradle.
When your Wireless Pack is on, the charge icon appears in the
software application while your Wireless Pack charges. Note that
your Wireless Pack must be in your handheld while charging, and
that it takes about 90 minutes to charge the battery. It’s time to
recharge the battery when you observe one of the following:
•
The LED turns red and blinks slowly
•
The LED does not turn on when you turn on your Wireless
Pack.
Wireless Pack User’s Guide
1–9
Getting Started
Step 6: Turn on your Wireless Pack
After the battery is charged, you can begin using your Wireless
Pack
1. Press the Power button on your Wireless Pack for two seconds
until you hear a beep.
2. Wait maximum two minutes for your Wireless Pack to locate
your service provider’s network. Do not tap OK.
When your Wireless Pack locates the network, the Network
Search dialog displays a Welcome message and your network
provider’s name appears in the upper-left corner of the Voice
application. If you are in an area without coverage, the Network
Search dialog displays an “Unable to register to the network”
message and “No Service” appears in the upper-left corner of the
Voice application.
1–10
Wireless Pack User’s Guide
Getting Started
Step 7: Activate your account
If you received a new SIM card with your Wireless Pack, you
need to call your network provider to activate your account. Your
network provider’s telephone number is located on the materials
that came with your Wireless Pack
Once you receive your telephone number, it may take a few hours
to become fully active. Some network providers send a special
message with your telephone number. Follow these steps to
check the telephone number:
1. Make sure your phone is on for at least 30 seconds.
2. Press the Phone button on your Wireless Pack for GSM /
GPRS to access the Phone application.
3. Tap the Menu icon.
4. Under Options, tap Phone Info.
5. Tap OK.
Wireless Pack User’s Guide
1–11
Getting Started
Congratulations
You’re ready to use your Wireless Pack. Keep these things in
mind as you use your new device:
•
If you travel outside a coverage area, your Wireless Pack
remains on but you can’t make or receive calls. If this occurs,
the LED blinks red quickly and the Wireless Pack
periodically tries to register to the network. When you return
to a coverage area, the LED blinks green slowly.
•
If you travel outside a coverage area, you can’t receive SMS
text messages. However, the messages are stored by the
network and you will receive them when you return to a
coverage area.
•
Your account includes a voicemail feature so people can
always leave you a message even when your Wireless Pack is
off.
Always use care when operating a mobile device. If you plan to
use your Wireless Pack while driving a car, we recommend using
a headset for hands-free operation. See “Connecting a headset” to
learn how to connect a headset to your Wireless Pack.
1–12
Wireless Pack User’s Guide
Getting Started
Appendix: Safety and General Information
Exposure to Radio Frequency Energy
Exposure to Radio Frequency Energy
The Wireless Pack Radio Product is designed to comply with the
following national standard regarding exposure of human beings
to radio frequency electromagnetic energy:
•
American National Standards Institute (ANSI
IEEE. C95. 1-1992)
FCC Statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:(1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
Wireless Pack User’s Guide
1–13
Getting Started
The use of shielded I/O cables is required when connecting this
equipment to any and all optional peripheral or host devices.
Failure to do so may violate FCC rules.
Canadian RFI Statement
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
exigences du Réglement sur le matériel brouilleur du Canada.
1–14
Wireless Pack User’s Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 14
Creator                         : CHAPTER1.FM
Create Date                     : 2001:07:31 16:59:21
Title                           : CHAPTER1.PDF
Author                          : stefand
Producer                        : Acrobat PDFWriter 4.05 for Windows

EXIF Metadata provided by EXIF.tools