Osram Sylvania IQHOME IQ-H product Zigbee module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2416565
Application ID	SSi3e149qq/J5ca046pWEg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.41kB (505144 bits)
Date Submitted	2014-10-13 00:00:00
Date Available	2014-10-13 00:00:00
Creation Date	2014-09-30 09:54:39
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2014-09-30 10:01:17
Document Title	Microsoft Word - IQ_ZigBee module_non_EDOS_version 1.01
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Version 1.0 non EDOS
OSRAM
Product Specification
ZPR
Issue:
IQ ZigBee module
19.09.2014
Status:
Overview:
The IQ ZigBee module is to be integrated into lamps to realize ZigBee functions.
1. GENERAL DESCRIPTION
1.1. Product identification
1.2. ZigBee IC
1.3. Interface
1.4. Typical voltage
1.5. Communication protocol
1.6. Operation Temperature
2. ELECTRICAL REQUIREMENTS
2.1. Nominal voltage range
2.2. Nominal operating current
IQ‐H product Zigbee module
Marvell 88MZ100
PWM/UART/IIC/SPI; 1ADC; TX & RX for test
3.3V
ZigBee 2012 PRO & ZigBee Light Link 1.0
‐40~105℃
2.2~3.6V
Receiver current(with active CPU 32MHz): 21mA
TX current(with active CPU 32MHz): 34mA
‐
3. MECHANICAL REQUIREMENT
3.1. Terminals
Soldering PAD
PIN connector
14.7mm*20mm*1.9mm
3.2. Size
Approvers
MKT
R&D
For information:
Dai David
Page 1 of 4
Comments:
Version 1.0 non EDOS
OSRAM
Product Specification
ZPR
Issue:
19.09.2014
4. CHANGE INDEX
Vers.
Date
1.0
15.04.2014
1.0.1
19.09.2014
Status:
Change
First draft
Revise Pin assignment
COMMENTS
Section
Change
Approvers
MKT
R&D
For information:
IQ ZigBee module
Dai David
Page 2 of 4
Comments:
Version 1.0 non EDOS
OSRAM
Product Specification
ZPR
19.09.2014
Issue:
IQ ZigBee module
Status:
Page 3 of 4
Comments:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device
into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording
such as the following: Contains Transmitter Module FCC ID: DZO-IQHOME or Contains FCC ID: DZO-IQHOME
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
If the IC number is not visible when the module is installed inside another device, then the outside of the device into which the
module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the
following: Contains IC: 11099A-IQHOME
Approvers
MKT
R&D
For information:
Dai David
Version 1.0 non EDOS
OSRAM
Product Specification
ZPR
19.09.2014
Issue:
IQ ZigBee module
Status:
Page 4 of 4
Comments:
when the module is installed inside another device, the user manual of this device must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
3.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
4.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user
documentation that comes with the product.
Approvers
MKT
R&D
For information:
Dai David

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2014:09:30 09:54:39+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:09:30 10:01:17+08:00
Metadata Date                   : 2014:09:30 10:01:17+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - IQ_ZigBee module_non_EDOS_version 1.01
Document ID                     : uuid:f4ab2e5e-0318-45d2-a4c4-8173bb45d45f
Instance ID                     : uuid:5dc3f489-b78a-4fd0-ae41-276f7daea900
Page Count                      : 4
Author                          : Administrator

EXIF Metadata provided by EXIF.tools