Ozmo OZMO-WM012-A1 Dual Band WiFi Direct Transceiver User Manual OZMO2000WM012 Wireless Module Datasheet
Ozmo, Inc Dual Band WiFi Direct Transceiver OZMO2000WM012 Wireless Module Datasheet
Ozmo >
manual
User Guide
© 2012 Ozmo, Inc. Portions may be covered by one or more of U.S. Patents No. 8,102,871
8,089,982 7,701,271 B1 and 7,826,408 B1. U.S. and foreign patents pending.
Page 1 of 9
OZMO2000WM012 Wireless Module
User guide
APP-0131-AN-V1.0 – May 2012
1 General Description
The OZMO2000WM012 Wireless Module is
a fully assembled and tested general-
purpose module using the OZMO2000
wireless System-on-Chip (SoC). The module
contains the OZMO2000 chip, memory,
antenna, and all other necessary
components to operate the OZMO2000.
The memory is preloaded with firmware that
is compatible with Windows 7 SoftAP or Wi-
Fi CERTIFIED™ Wi-Fi Direct host systems.
With modified firmware, the OZMO2000 can
support other interfaces, such as I2C,
PCM/I2S a second SPI and GPIO. Contact
your Ozmo FAE for assistance with these
interfaces.
For detailed information on the OZMO2000
component itself, refer to the OZMO2000
datasheet.
2 Features
Small, self-contained SMT module
On-board memory stores OZMO2000
program image, MAC address and security
credentials
On-chip regulators allow direct connection to
battery or unregulated supply between 1.8V
and 3.6V. ( certain limitations may apply
depending on module version )
Total module height is 4mm
3 Benefits
On-board 8051 processor eliminates need
for external micro-controller.
Flexible application interfaces included: SPI,
UART, I2C, PCM/I2S, GPIOs, LED drivers
with PWM support and a General-Purpose
ADC.
Great battery life thanks to low power radio
and systems design.
Low latency thanks to agile systems
architecture and fast wake up algorithms.
OZMO2000WM012 Module User Guide
© 2012 Ozmo, Inc. Portions may be covered by one or more of U.S. Patents No. 8,102,871
8,089,982 7,701,271 B1 and 7,826,408 B1. U.S. and foreign patents pending.
Page 2 of 9
4 Table of Contents
OZMO2000WM012 Wireless Module .............................................................................................. 1
User guide ....................................................................................................................................... 1
1 General Description ................................................................................................................ 1
2 Features .................................................................................................................................. 1
3 Benefits ................................................................................................................................... 1
4 Table of Contents .................................................................................................................... 2
5 Applications information .......................................................................................................... 3
5.1 Application Diagram......................................................................................................... 3
5.2 Using the module ............................................................................................................. 3
6 Pinout / Pin Description ........................................................................................................... 4
6.1 Module Pinout .................................................................................................................. 4
7 Electrical Characteristics ......................................................................................................... 4
7.1 Absolute Maximum Ratings ............................................................................................. 4
7.2 Recommended Operating Conditions ............................................................................. 5
7.3 Terminal Characteristics .................................................................................................. 5
7.4 Radio Characteristics....................................................................................................... 6
7.4.1 Radio Frequencies ................................................................................................... 6
7.4.2 Transmitter ............................................................................................................... 6
7.5 ESD Caution Notice ......................................................................................................... 6
8 Module Floorplan .................................................................................................................... 6
9 Ordering Information ............................................................................................................... 7
10 Regulatory notes ..................................................................................................................... 8
10.1 FCC ID ............................................................................................................................. 9
OZMO2000WM012 Module User Guide
© 2012 Ozmo, Inc. Portions may be covered by one or more of U.S. Patents No. 8,102,871
8,089,982 7,701,271 B1 and 7,826,408 B1. U.S. and foreign patents pending.
Page 3 of 9
5 Applications information
5.1 Application Diagram
Figure 1 Application Diagram
5.2 Using the module
The WM012 module is designed to operate with customized embedded firmware programmed
into the module by Ozmo Devices which controls the functioning of the radio and the various
interfaces.
The General Purpose Input-Output pins (referred to as AIO or GPIO pins) are configured and
monitored by the firmware.
Depending on the programmed functionality, the module will send data over the wireless link
corresponding to the inputs received on the AIO pins, or will output digital signals from the AIO
pins based on data received over the wireless link.
Ozmo application engineers will work with customers to define the desired Input-Output behavior
and develop the customized firmware to achieve the desired digital input-output behavior. This
has no effect on the radio operation which is defined by low-level firmware and hardware and
always operates in accordance with FCC and Wi-Fi standards. The custom aspects of the
firmware only affect the formatting and timing of the back-end digital I/O functions.
OZMO2000WM012 Module User Guide
© 2012 Ozmo, Inc. Portions may be covered by one or more of U.S. Patents No. 8,102,871
8,089,982 7,701,271 B1 and 7,826,408 B1. U.S. and foreign patents pending.
Page 4 of 9
6 Pinout / Pin Description
6.1 Module Pinout
Figure 3 shows the pinout of the module from the top view.
Figure 2 Module Pinout (Top View)
7 Electrical Characteristics
7.1 Absolute Maximum Ratings
Parameter
Min
Max
Units
Storage temperature
-40
+125
°C
Supply voltage: VBATT
-0.3
3.6
V
GND
-0.3
0.3
V
Supply voltage: Digital I/O pins
-0.3
VBATT + 0.3
V
OZMO2000WM012 Module User Guide
© 2012 Ozmo, Inc. Portions may be covered by one or more of U.S. Patents No. 8,102,871
8,089,982 7,701,271 B1 and 7,826,408 B1. U.S. and foreign patents pending.
Page 5 of 9
Parameter
Min
Max
Units
RF Input Power
+10
dBm
7.2 Recommended Operating Conditions
Parameter
Min
Typ
Max
Units
Operating temperature
0
+70
°C
Supply voltage: VBATT (1)
1.8
3.6
V
GND
0
V
(1) Additional limitations may apply. See ordering information for more detail.
7.3 Terminal Characteristics
Parameter
Conditions
Min
Typ
Max
Units
VIL, input logic low
1.8 < VBATT < 1.95
-
0.3VBATT
V
VIH, input logic high
1.8 < VBATT < 1.95
0.7VBATT
-
V
ΔV, input hysteresis
0.4
V
II, input resistance
Pull-up resistor to VBATT
42
KΩ
VOL, output logic low
IOL = 8 mA (AIO[15:3],
TDO, TSTSEL1, AUXO
0.2 VBATT
V
VOL, output logic low
IOL =16 mA (AIO[2:0])
0.2 VBATT
V
VOH, output logic high
IOL = 8 mA (AIO[15:03,
TDO, AUX0)
0.8 VBATT
V
VOH, output logic high
IOL = 16 mA (AIO[2:0])
0.8 VBATT
V
IOZ, output tri-state current
0.0 V < V0 < 3.6 V
-10
10
μA
CI, input capacitance
5
pF
CIO, input / output
capacitance
5
pF
OZMO2000WM012 Module User Guide
© 2012 Ozmo, Inc. Portions may be covered by one or more of U.S. Patents No. 8,102,871
8,089,982 7,701,271 B1 and 7,826,408 B1. U.S. and foreign patents pending.
Page 6 of 9
7.4 Radio Characteristics
7.4.1 Radio Frequencies
This module operates on standard Wi-Fi channels within the 2.412GHZ to 2.472GHz bands
(limited to 2462MHz for operation in the US), and the 4.915GHZ to 5.825GHz bands (limited to
5180-5240MHz and 5745-5825MHz for operation in the US). Ozmo Devices will program the
module with firmware which automatically selects the channel according to the designated
application requirements established with the customer.
7.4.2 Transmitter
The WM012 module is designed to operate at firmware-controlled transmit power power levels.
The module has been FCC certified at the maximum transmit power settings of 5.1dBm (2.4GHZ
band) and 0.6dBm (5.150GHz band) and 4.2dBm (5.8GHz band). Firmware may be provided to
customers which configures the device at lower transmit power levels to achieve longer battery
life, but it is not possible to operate this module at any higher power levels than those used during
the certification testing.
7.5 ESD Caution Notice
ESD (Electrostatic Discharge) can damage this device. Ozmo, Inc. recommends that all
integrated circuits be handled and stored using appropriate ESD precautions. Failure to observe
proper procedures can cause ESD damage ranging from performance degradation to complete
device failure.
8 Module Floorplan
Figure 4 shows the floorplan of the OZMO2000WM012 Wireless Module.
OZMO2000WM012 Module User Guide
© 2012 Ozmo, Inc. Portions may be covered by one or more of U.S. Patents No. 8,102,871
8,089,982 7,701,271 B1 and 7,826,408 B1. U.S. and foreign patents pending.
Page 7 of 9
Figure 3 Floorplan of the OZMO2000WM012 Wireless Module
The WM012 module is designed to be mounted to the end-equipment printed circuit board (pcb)
as a surface mount component. Standard surface-mount technology (SMT) circuit construction
procedures should be followed.
9 Ordering Information
The OZMO2000WM012 wireless module is made available in the following options:
Order number
Description
OZMO2000WM012AXD-2221
With low voltage Flash. VBATT operating range: 1.8V – 1.95V,
2Mbit Flash, Tray packaging
OZMO2000WM012AXD-2321
With high voltage Flash. VBATT operating range: 2.7V – 3.6V,
2Mbit Flash, Tray packaging
Contact your Ozmo sales representative or FAE with further questions or to confirm availability.
OZMO2000WM012 Module User Guide
© 2012 Ozmo, Inc. Portions may be covered by one or more of U.S. Patents No. 8,102,871
8,089,982 7,701,271 B1 and 7,826,408 B1. U.S. and foreign patents pending.
Page 8 of 9
10 Regulatory notes
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna by moving the end equipment.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, (example - use only shielded interface cables
when connecting to computer or peripheral devices). Any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC & IC Radiation Exposure Statement:
This equipment complies with FCC & IC radiation exposure limits set forth for an uncontrolled
environment..
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. This device is intended only for OEM integrators under the following conditions:
- The transmitter module may not be co-located with any other transmitter or antenna.
As long as the condition above is met, further transmitter test will not be required. However, The
OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed (for example, digital device emissions, PC
peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC & IC authorizations are no
longer considered valid and the FCC & IC IDs cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product (including
the transmitter) and obtaining separate FCC & IC authorizations.
OZMO2000WM012 Module User Guide
© 2012 Ozmo, Inc. Portions may be covered by one or more of U.S. Patents No. 8,102,871
8,089,982 7,701,271 B1 and 7,826,408 B1. U.S. and foreign patents pending.
Page 9 of 9
Indoor usage for 5.2GHz
Important note:
Section 15.407(e) of the FCC Rules states that 5.15 – 5.25 GHZ band UNII devices are restricted
to indoor operations.
If the device is configured for those frequencies, the usage of the device must be restricted to
indoor applications.
End Product Labeling
The final end product must be labeled in a visible area with the corresponding FCC ID number.
Similar to: “Contains Transmitter Module FCC ID: EFU-OZMO-WM012-A1”
Manual Information That Must be Included
The user’s manual for end users must include the following information in a prominent location.
Warning: modifications of the product not approved by the manufacturer can void the
user’s authority to operate the device
The end product using this module must be labeled with the FCC 2part statement
“This device complies with FCC Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.”
This statement can be placed in the user’s manual if the product is too small.
10.1 FCC ID
This module product has been tested to meet FCC requirements for unlicensed devices and the
FCC ID is: EFU-OZMO-WM012-A1
This label is affixed to each module:
Since this module will be embedded inside other equipment such as consumer audio products, or
peripherals like game controllers, that equipment should be marked with a label as follows:
“Contains Transmitter Module FCC ID: EFU-OZMO-WM012-A1”