PHILIPS Consumer Electronics SE65H US DECT PHONE-HEADSET User Manual USERS MANUAL 1

Download:
Mirror Download [FCC.gov]
Document ID	932968
Application ID	EdUk7Iw8pd5aTfdMsx41tA==
Document Description	USERS MANUAL 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	142.77kB (1784579 bits)
Date Submitted	2008-04-24 00:00:00
Date Available	2008-04-25 00:00:00
Creation Date	2008-03-03 10:02:58
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-03-03 10:03:28
Document Title	USERS MANUAL 1
Document Creator	PScript5.dll Version 5.2

01GB01COV.book Page 1 Wednesday, January 16, 2008 1:30 PM
Register your product and get support at
www.philips.com/welcome
SE655
US-EN Telephone Answering Machine
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
01GB01COV.book Page 2 Wednesday, January 16, 2008 1:30 PM
01GB01COV.book Page 1 Wednesday, January 16, 2008 1:30 PM
Table of contents
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.8.1
2.8.2
2.9
2.10
2.11
2.12
3.1
3.2
Important Safety
Instructions
Environment and safety 6
Safety information
Power requirements
Battery requirements
Telephone connection
Safety precautions
Conformity
Environmental care
Equipment approval
Information
Notification to the local
telephone company
Rights of the
Phone Company
Interference Information
Noise
10
Hearing Aid Compatibility
(HAC)
10
FCC RF Radiation
Exposure Statement
10
11
11
3.3
Important
Power requirements
Electric, Magnetic and
Electromagnetic Fields
(“EMF”)
Recycle your batteries
4.1
The RBRC® seal
Service Centers
13
13
Your phone
14
Table of contents
12
13
5.1
5.2
5.3
5.4
What’s in the box
14
Overview of your phone 15
Display icons and Messages17
Overview of the
base station
18
6.1
6.2
6.3
6.3.1
6.3.2
6.4
6.5
6.6
6.7
Getting started
Connect the base station
Wall mounting the base
Install your phone
Install battery
Charge battery
Attach/Remove belt clip
Install optional headset
Using multipacks
Menu structure
19
19
19
20
20
21
21
21
21
22
7.1
7.1.1
7.1.2
7.1.3
7.1.4
7.1.5
7.1.6
Using your phone
Make a call
Predialling
Direct dialling
Call from redial list
Call from the call log
Call from the phonebook
Call using Direct Access
Memory
Enter a Dialing Pause
Answer a call
Handsfree answering
End a call
27
27
27
27
27
27
28
7.1.7
7.2
7.2.1
7.3
8.1
8.2
28
28
28
29
29
Use more of
your phone
30
Switch the handset on/off 30
Keypad lock/unlock
30
01GB01COV.book Page 2 Wednesday, January 16, 2008 1:30 PM
8.3
8.4
8.4.1
8.4.2
8.4.3
8.5
8.5.1
8.5.2
8.5.3
8.5.4
8.5.5
8.5.6
8.5.7
8.6
8.6.1
8.6.2
8.6.3
8.6.4
8.6.5
8.7
8.8
8.8.1
8.8.2
8.8.3
8.8.4
8.9
8.9.1
8.9.2
8.9.3
8.9.4
Text or number entry
Call in progress
Adjust earpiece or speaker
volume
Mute/Unmute microphone
Activate/Deactivate
loudspeaker mode
Using your Phonebook
Store a contact in the
phonebook
Access phonebook
Modify a phonebook entry
Select phonebook melody
Delete a phonebook entry
Delete all phonebook
entries
Direct Access Memory
Using the Redial list
Access Redial list
View redial number details
Save a redial number into
the phonebook
Delete a redial number
Delete all redial numbers
Call waiting
Using the Call log
Access the Call log
Save call list entry into the
phonebook
Delete a call list entry
Delete all call list entries
Using the Intercom
Intercom another handset
Transfer an external call to
another handset
Answer an external call
during intercom
Switch between an internal
and external call
30
30
30
30
30
31
31
31
31
32
32
33
33
33
34
34
34
34
34
35
35
35
35
36
36
36
36
37
37
37
8.9.5
8.10
8.11
8.11.1
8.11.2
8.11.3
8.11.4
9.1
9.2
9.2.1
9.2.2
9.2.3
9.3
9.4
9.5
9.6
9.7
9.8
10
10.1
10.1.1
10.1.2
10.2
10.3
10.3.1
10.3.2
10.4
10.5
10.6
10.7
10.8
Establish a three-party
conference call
Paging
Clock and Alarm settings
Set Date and Time
Set Time and Date Format
Set Alarm
Set Alarm Tone
37
37
38
38
38
38
39
Personal settings
39
Change the Handset Name 39
Handset Tones
39
Set the Ring Volume
39
Set the Ring Tones
40
Activate/Deactivate
Key Beep
40
Change the
Display Language
40
Select the
Display Wallpaper
41
Select the Color Theme 41
Set the Display Contrast 41
Set the Backlight Time
41
Deactivate/Activate Auto
Hang-Up
41
Advanced settings
Easy Call
Set Easy Call to On or Off
Set Easy Call number
Auto Conference
Call Barring
Set Call Barring Mode
Set a Call Barring number
XHD Sound
Change PIN
Registration
Unregister
Reset Unit
42
42
42
42
43
43
43
43
44
44
44
45
45
Table of contents
01GB01COV.book Page 3 Wednesday, January 16, 2008 1:30 PM
10.9
10.10
10.11
10.12
10.13
Set Area Code
Set Auto Prefix
Change the Dial Mode
Set First Ring Detection
Default Settings
46
46
47
47
47
11
11.1
11.1.1
11.1.2
Network Service
Voice Mail
Access Voice Mail
Set Voice Mail Number
48
48
48
48
12
Telephone answering
machine (TAM)
Playing Messages
Playback of messages via
handset
Functions available during
playback
Delete all messages
Turn the Answering
Machine On/Off
Play, Record, or Delete an
Outgoing Message
Set the Answer mode
Answering Machine
Settings
Ring Delay
Remote Access
Handset Screening
Setting the Outgoing
Message Language
12.1
12.1.1
12.1.2
12.2
12.3
12.4
12.5
12.6
12.6.1
12.6.2
12.6.3
12.6.4
55
15
INDEX
57
49
50
50
50
50
51
51
51
52
53
53
Technical data
53
14
Frequently asked
questions
Connection
Set-up
Sound
54
54
54
55
Table of contents
Product behaviour
49
49
13
14.1
14.2
14.3
14.4
01GB01COV.book Page 4 Wednesday, January 16, 2008 1:30 PM
Important Safety
Instructions
Some of the following information may
not apply to your particular product;
however, when using telephone
equipment, basic safety precautions
should always be followed to reduce the
risk of fire, electric shock and injury to
persons, including the following:
1 Read and understand all
instructions.
2 Follow all warnings and instructions
marked on the product.
3 Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4 Telephones should not be used
while you are in a bathtub, shower
or pool. Immersion of the
telephone or handset in water could
cause an electrical shock.
5 Slots and openings in the cabinet
back or bottom are provided for
ventilation, to protect it from
overheating.These openings must
not be blocked or covered. The
openings should never be blocked
by placing the product on the bed,
sofa, rug, or other similar
surface.This product should not be
placed in a built-in installation unless
proper ventilation is provided.
6 This product should be operated
only from the type of power source
10
11
12
13
indicated on the marking label. If
you are not sure of the type of
power supply to your home, consult
your dealer or local power
company.
Do not allow anything to rest on
the power cord. Do not locate this
product where the cord will be
abused by persons walking on it.
Do not overload wall outlets and
extension cords as this can result in
the risk of fire or electric shock.
Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric
shock.
Never spill liquid of any kind on the
product.
To reduce the risk of electric shock,
do not disassemble this product, but
take it to a qualified service
personnel when service or repair
work is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause
electric shock when the appliance is
subsequently used.
Do not expose the product to
extreme temperatures such as areas
near a hot radiator or stove or in a
hot car.
Do not place lighted candles,
cigarettes, cigars, etc., on the
telephone.
Never touch uninsulated telephone
wires or terminals unless the
Important Safety Instructions
01GB01COV.book Page 5 Wednesday, January 16, 2008 1:30 PM
telephone line has been
disconnected at the network
interface.
14 Never install or modify telephone
wiring during a lightning storm.
15 Never install telephone jacks in wet
locations unless the jack is
specifically designed for wet
locations.
16 Use caution when installing or
modifying telephone lines to
prevent electrical shock and/or fire.
17 Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
A When the power supply cord or
plug is damaged or frayed.
B If the product has been exposed to
rain or water.
C If the product does not operate
normally by following the operating
instructions.
D If the product’s cabinet has been
damaged.
E If the product exhibits a distinct
change in performance.
18 Avoid using a telephone (other than
a cordless type) during an electrical
storm. There may be a remote risk
of electric shock from lightning.
19 Do not use the telephone to report
a gas leak in the vicinity of the leak.
20 Do not place this product on an
unstable cart, stand or table.The
product may fall, causing serious
damage to the product.
IF YOUR PRODUCT UTILIZES
BATTERIES,THE FOLLOWING
Important Safety Instructions
ADDITIONAL PRECAUTIONS
SHOULD BE OBSERVED:
1 Use only the type and size of
battery(ies) specified in the user
manual.
2 Do not dispose of the battery(ies)
in fire. They may explode. Check
with local codes for possible special
disposal instructions.
3 Do not open or mutilate the
battery(ies). Released electrolyte is
corrosive and may cause damage to
the eyes or skin. It may be toxic if
swallowed.
4 Exercise care in handling
battery(ies) in order not to short
out the battery(ies) with conducting
materials such as rings, bracelets,
and keys.The battery(ies) or
conductor may overheat and cause
burns.
5 Do not attempt to recharge the
battery(ies) provided with or
identified for use with this product
that are not intended to be
charged.The battery(ies) may leak
corrosive electrolyte or explode.
6 Do not attempt to rejuvenate the
battery(ies) provided with or
identified for use with this product
by heating them. Sudden release of
the battery(ies) electrolyte may
occur causing burns or irritation to
eyes or skin.
7 When replacing battery(ies), all
batteries should be replaced at the
same time. Mixing fresh and
discharged batteries could increase
internal cell pressure and rupture
01GB01COV.book Page 6 Wednesday, January 16, 2008 1:30 PM
the discharged battery(ies). (Applies
to products employing more than
one separately replaceable primary
battery.)
8 When inserting battery(ies) into
this product, the proper polarity or
direction must be observed.
Reverse insertion of battery(ies) can
cause charging, and that may result
in leakage or explosion.
9 Remove battery(ies) from this
product if storing over 30 days
because the battery(ies) could leak
and damage the product.
10 Discard “dead” battery(ies) as soon
as possible since “dead” batteries
are more likely to leak in a product.
11 Do not store this product, or the
battery(ies) provided with or
identified for use with this product,
in high temperature areas.
Batteries that are stored in a freezer
or refrigerator for the purpose of
extending shelf life should be
protected from condensation during
storage and defrosting. Batteries
should be stabilized at room
temperature prior to use after cold
storage.
12 If your product uses rechargeable
battery(ies), charge the battery(ies)
only in accordance with the
instructions and limitation specified
in the User Manual.
SAVE THESE INSTRUCTIONS
Environment and
safety
2.1
Safety information
This telephone is not designed for
making emergency telephone calls when
the power fails. An alternative should be
made available for access to emergency
calling.
2.2
Power requirements
This product requires an electrical supply
of 120 volts, single phase alternating
current, excluding IT installations defined
in standard UL 60950.
2.3
Battery requirements
The handset requires power source of
two rechargeable NiMH batteries, size
AAA 1.2V 750mAh (Hr11/45). IF THE
INCORRECT TYPE OF BATTERIES ARE
USED,A WARNING MESSAGE WILL BE
DISPLAYED.
Use only Philips Multi-Life 750mAh
rechargeable NimH batteries.
For servicing or replacement, you can
purchase a suitable headset through
service centre or retail shop.
Caution
The electrical network is classified as
dangerous according to criteria in the
standard UL 60950. The only way to
power down this product is by
unplugging the power supply from the
Environment and safety
01GB01COV.book Page 7 Wednesday, January 16, 2008 1:30 PM
electrical outlet. Ensure the electrical
outlet is located close to the apparatus
and is always easily accessible.
2.4
Telephone connection
The voltage on the network is classified
as TNV- 3 (Telecommunication Network
Voltages, as defined in the standard UL
60950). Following a power cut, the call in
progress is lost.
Caution
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe system, if present, are
connected together. This precaution may
be particularly important in rural areas.
2.5
Safety precautions
• Do not allow the handset to come
into contact with liquids or moisture.
• Do not open the handset, base station
or charger.This could expose you to
high voltages.
• Do not allow the charging contacts of
the charger or the battery to come
into contact with extraneous
conductive materials.
• There is a slight chance that the
telephone could be damaged by an
electrical storm. It is recommended
that users unplug the phone from the
USB socket and the phone line from
the phone wall socket during a storm.
Environment and safety
• Do not use the handset in an
explosive hazard area such as where
there is gas leaking.
• Young children should be supervised
to ensure that they do not play with
the telephone.
• Because the phone works by sending
radio signals between the base unit
and the handset, wearers of hearing
aids may experience interference in
the form of a humming noise.
• We advise that this phone should not
be used near intensive care medical
equipment or by persons with
pacemakers.
• Your phone can interfere with
electrical equipment such as
answering machines, TV and radio
sets if placed too close. It is
recommended that you position the
base unit at least one meter from such
appliances.
Caution
Use only the mains adapter supplied with
this telephone. Incorrect adapter polarity
or voltage can seriously damage the unit.
Caution
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries;
use recommended type supplied with
this telephone. NiMH batteries must be
disposed of in accordance with the
applicable waste disposal regulations.
FCC CERTIFICATION NUMBER IS
LOCATED ON THE CABINET
BOTTOM
01GB01COV.book Page 8 Wednesday, January 16, 2008 1:30 PM
The term “IC:” before the certification
number signifies that Industry Canada
technical specifications were met.This
certification means that the equipment
meets certain radio communications and
operational requirements.
2.6
Conformity
We, Philips declare that the product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. This
product can only be connected to the
analogue telephone networks of the
countries mentioned on the packaging.
You can find the Declaration of
Conformity on www.p4c.philips.com.
2.7
Environmental care
Please remember to observe
the local regulations regarding
the disposal of your
packaging materials, exhausted
batteries and old phone and,
where possible, promote their
recycling.
Philips has marked the packaging
with standard symbols designed to
promote the recycling and
appropriate disposal of your
eventual waste.
A financial contribution has been
paid to the associated national
recovery & recycling system.
The labeled packaging material is
recyclable.
2.8
Equipment approval
Information
Your telephone equipment is approved
for connection to the public switched
telephone network and is in compliance
with parts 15 and 68, FCC Rules and
Regulations and the Technical
Requirements for Telephone Terminal
Equipment published by ACTA.
2.8.1 Notification to the local
telephone company
On the bottom of this equipment is a
label indicating, among other
information, the US number and Ringer
Equivalence Number (REN) for the
equipment.You must, upon request,
provide this information to your
telephone company.
The REN is useful in determining the
number of devices you may connect to
your telephone line and still have all of
these devices ring when your telephone
number is called. In most (but not all)
areas, the sum of the RENs of all devices
connected to one line should not exceed
5. To be certain of the number of devices
you may connect to your line as
determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA.
A compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a
Environment and safety
01GB01COV.book Page 9 Wednesday, January 16, 2008 1:30 PM
compatible modular jack that is also
compliant. See installation instructions
for details.
Notes
• This equipment may not be used on
coin service provided by the
telephone company.
• Party lines are subject to state tariffs,
and therefore, you may not be able to
use your own telephone equipment if
you are on a party line. Check with
your local telephone company.
• Notice must be given to the
telephone company upon permanent
disconnection of your telephone from
your line.
• If your home has specially wired alarm
equipment connected to the
telephone line, ensure the installation
of this product does not disable your
alarm equipment. If you have
questions about what will disable
alarm equipment, consult your
telephone company or a qualified
installer.
2.8.2 Rights of the Phone
Company
Should your equipment cause trouble on
your line which may harm the telephone
network, the telephone company shall,
where practicable, notify you that
temporary discontinuance of service may
be required.Where prior notice is not
practicable and the circumstances
warrant such action, the telephone
company may temporarily discontinue
Environment and safety
service immediately. In case of such
temporary discontinuance, the telephone
company must:
(1) promptly notify you of such
temporary discontinuance; (2) afford you
the opportunity to correct the situation;
and (3) inform you of your right to bring
a complaint to the Commission pursuant
to procedures set forth in Subpart E of
Part 68, FCC Rules and Regulations.
The telephone company may make
changes in its communications facilities,
equipment, operations or procedures
where such action is required in the
operation of its business and not
inconsistent with FCC rules and
Regulations. If these changes are
expected to affect the use or
performance of your telephone
equipment, the telephone company must
give you adequate notice, in writing, to
allow you to maintain uninterrupted
service.
2.9
Interference Information
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference; and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules.
01GB01COV.book Page 10 Wednesday, January 16, 2008 1:30 PM
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna (that is, the antenna for radio
or television that is “receiving” the
interference).
• Reorient or relocate and increase the
separation between the
telecommunications equipment and
receiving antenna.
• Connect the telecommunications
equipment into an outlet on a circuit
different from that to which the
receiving antenna is connected.
If these measures do not eliminate the
interference, please consult your dealer
or an experienced radio / television
technician for additional suggestions.
Also, the Federal Communications
Commission has prepared a helpful
booklet, “How To Identify and Resolve
Radio/TV Interference Problems”. This
booklet is available from the U.S.
10
Government Printing Office,
Washington, D.C. 20402.
Please specify stock number 004-00000345-4 when ordering copies.
Notice: The changes or modifications
not expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment.
2.10 Noise
Electrical pulse noise is present at one
time or another.This is most intense
during electrical storms. Certain kinds of
electrical equipment, such as light
dimmers, fluorescent bulbs, motors, fans,
etc., also generate pulse noise. Because
radio frequencies are susceptible to this,
you may on occasion hear pulse noise
through the receiver.This is usually only a
minor annoyance and should not be
interpreted as a defect of the unit.
2.11
Hearing Aid Compatibility
(HAC)
This telephone system meets FCC and
Industry Canada standards for Hearing
Aid Compatibility.
2.12
FCC RF Radiation Exposure
Statement
This equipment complies with FCC RF
radiation exposure limits set forth for an
uncontrolled environment.This
equipment should be installed and
operated with a minimum distance of
Environment and safety
01GB01COV.book Page 11 Wednesday, January 16, 2008 1:30 PM
20 centimeters between the radiator and
your body.This transmitter must not be
co-located or operating in conjunction
with any other antenna or transmitter.
For hand held operation, this phone has
been tested and meets the FCC RF
exposure guidelines. Use of other
accessories may not ensure compliance
with FCC RF exposure guidelines.
Important
Take time to read this user manual
before you use your phone. It contains
important information and notes
regarding your phone.
NOTICE: This product meets the
applicable Industry Canada technical
specifications.
The equipment must be installed using an
acceptable method of connection. The
customer should be aware that
compliance with the above conditions
may not prevent degradation of service
in some situations.
Repairs to certified equipment should be
made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations made
by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
Important
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe systems, if present, are
connected together. This precaution may
be particularly important in rural areas.
CAUTION: Users should not attempt to
make such connections themselves, but
should contact the appropriate electric
inspection authority, or electrician, as
appropriate.
NOTES: This equipment may not be used
on coin service provided by the
telephone company.
3.1
Power requirements
• This product requires an electrical
supply of 220-240 volts AC. In case of
power failure, the communication can
be lost.
• The Electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical
outlet is always easily accessible.
• The voltage on the network is
classified as TNV-3
(Telecommunication Network
Voltages), as defined in the standard
UL 60950.
Warning
To avoid damage or malfunction:
• Do not allow the charging contacts or
the battery to come into contact with
metal objects.
11
01GB01COV.book Page 12 Wednesday, January 16, 2008 1:30 PM
• Do not open it as you could be
exposed to high voltages.
• Do not allow the charger to come
into contact with liquids.
• Never use any other battery than the
one delivered with the product or
recommended by Philips: risk of
explosion.
• Always use the cables provided with
the product.
• Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.
• This equipment is not designed to
make emergency calls when the
power fails. An alternative has to be
made available to allow emergency
calls.
• Do not expose the phone to
excessive heat caused by heating
equipment or direct sunlight.
• Do not drop your phone or allow
objects to fall on your phone.
• Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
• Do not use the product in places
where there are explosive hazards.
• Do not let small metal objects come
into contact with the product. This
can deteriorate audio quality and
damage the product.
• Active mobile phones in the vicinity
may cause interference.
About operating and storage
temperatures:
• Operate in a place where
temperature is always between 0 and
35º C (32 to 95º F).
• Store in a place where temperature is
always between -20 and 45º C (-4 to
113º F).
• Battery life may be shortened in low
temperature conditions.
3.2
1.
2.
3.
4.
5.
12
Electric, Magnetic and
Electromagnetic Fields
(“EMF”)
Philips Royal Electronics
manufactures and sells many
consumer oriented products which
usually, as with any electronic
apparatus, have the ability to emit
and receive electro magnetic signals.
One of Philips’ leading Business
Principles is to take all necessary
health and safety precautions for
our products, to comply with all
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
Philips is committed to develop,
produce and market products that
cause no adverse health effects.
Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
Philips plays an active role in the
development of international EMF
Important
01GB01COV.book Page 13 Wednesday, January 16, 2008 1:30 PM
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
integration in its products.
3.3
Recycle your batteries
Do not dispose your rechargeable
batteries. Call the toll fee number 1-800822-8837 to get instructions on how to
recycle your batteries.
The
RBRC®
seal
The RBRC® Seal
on the nickel metal
hydride battery
indicates that
Philips Royal
Electronics is
voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
The RBRC® program provides a
convenient alternative to placing used
nickel metal hydride batteries into the
trash or municipal waste, which may be
illegal in your area.
Philips’s participation in RBRC® makes it
easy for you to drop off the spent battery
at local retailers participating in the
The RBRC® seal
RBRC® program or at authorized Philips
product service centers.
Please call 1-800-8-BATTERY for
information on Ni-MH battery recycling
and disposal bans/restrictions in your
area. Philips’s involvement in this
program is part of its commitment to
protecting our environment and
conserving natural resources.
RBRC® is a registered trademark of
Rechargeable Battery Recycling
Corporation.
4.1
Service Centers
US service center
Philips Accessories & Computer
Peripherals North America1881 Route
46 WestLedgewood, NJ 07852
Phone: (800) 233-8413
E-mail support:
http://www.support.philips.com/support
13
01GB01COV.book Page 14 Wednesday, January 16, 2008 1:30 PM
Your phone
Congratulations on your purchase and welcome to Philips!
To truly benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
5.1
What’s in the box
Handset
Base Station with
bracket
Battery door
Belt clip
2 AAA rechargeable
batteries
Power supply
Line cord*
User manual
Guarantee
Quick Start Guide
Note
* You may find in the box the line adaptor delivered separately from the line cable. In this
case, you have to connect the line adaptor to the line cord first before plugging
the line cord to the line socket.
In multihandset packs, you will find one or more additional handsets, chargers with power
supply units and additional rechargeable batteries.
14
Your phone
01GB01COV.book Page 15 Wednesday, January 16, 2008 1:30 PM
5.2
Overview of your phone
A Event LED
The event LED on your handset blinks
when there is a new message recorded
on your telephone answering machine. If
you have subscribed to Caller Line
Identification, the event LED also blinks
when there is a new call, or a new voice
mail message.
B Earpiece
Your phone
C Display
See section 5.3 for an overview of the
display icons.
D Select key o
Select the function displayed on the
screen or go to the next lower level in a
menu. Also used to confirm entries (for
example when setting date and time).
E Back/Clear key c
Press to clear (delete) a character or
number when making an entry. Long
press to clear all.
When navigating menus, press to move
to the previous higher menu level (Back
is displayed).
F Navigation keys n
In idle mode: Scroll up u to access the
Call log and scroll down d to access
the Phonebook.
During a call: Scroll n to increase or
decrease earpiece and speaker volume.
Editing and entry: Move to the previous
character u or next character d.
In other modes: Scroll up u and down
d a menu list or go to the previous
or next record in the Phonebook, Redial
list, or Call log.
G Talk key t
In idle mode: Make an external call or
answer an incoming external or internal
call.
During a call: Activate the flash function.
In other modes: Dial the selected
number in the Phonebook, Redial list, or
Call log.
H Hang-up/Exit key h
In idle mode: Long press (5 seconds) to
switch off the handset.
15
01GB01COV.book Page 16 Wednesday, January 16, 2008 1:30 PM
When the handset is switched off: Long
press (1 second) to switch it on.
During a call: Hang up a call.
In other modes: Press to return to idle
mode.
Menu key m
In idle mode: Go to the main menu.
Redial key r
Access the Redial list in idle mode.
K Loudspeaker key l
In idle mode: Turn on the loudspeaker
and dial the number. Answer an incoming
call using handsfree mode.
During a call: Toggle the loudspeaker on/
off.
L Number keys
Use to dial numbers and write characters.
With key 1, a long press dials your
voice mail subscriber access number.
With keys 3 to 9, a long press dials
one of your direct memory access
numbers.
M */Keypad lock & Format key
In idle mode: Long press to lock/ unlock
keypad.
Predialling or editing: Press to enter a “*”.
Off hook: Long press to temporarily
switch to tone (DTMF) dialling if using
pulse.
N Ringer off key #
In idle mode: Long press to turn the
ringer on/off.
Dialling or editing: Long press to insert a
pause (during predialling) and short press
to insert a “#”.
Editing: Short press to switch upper/
lower case.
16
During call log display: Toggles area code
and long distance display on/off.
O Mute key s
When off hook: Deactivate/activate the
microphone.
P Call transfer key & Intercom
key i
In idle mode: Initiate an internal call.
During a call: Short press to hold the line
and page another handset. Long press to
set up a conference between an external
call and two handsets.
Q Microphone
R Belt clip hole
S Loudspeaker
Warning
Handsfree activation can suddenly
increase the volume of the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
T Headset jack
U Battery door
Your phone
01GB01COV.book Page 17 Wednesday, January 16, 2008 1:30 PM
5.3
Display icons and Messages
Indicates that the battery is fully
charged. This icon blinks during
charge and when the battery is
low.
When the Icon is empty the
battery is practically discharged.
Note
If Warning Batt flashes together
with a blinking battery icon,
batteries of the wrong type are
installed in the handset. Replace
with batteries of the correct type.
If you subscribe to voice mail
service, blinks when there are
new messages.
Blinks when there is new voice
mail.
Indicates new and missed calls
in the call log records. Blinks
when there are missed calls.
Appears when the alarm clock
is activated. Blinks when the
alarm time comes.
Appears when the loudspeaker
is activated.
Appears when the ringer is off.
Your phone
Select
OK
Back
Clear
Steady on when the answering
machine is on. Blinks when
messages have been received by
the answering machine; blinks
rapidly when answering machine
memory is full.
Indicates that the handset is
registered and within range of
the base station. Icon blinks
when the handset is out of
range or is searching for a base.
Appears when in the menu
mode. Press the key directly
below to move to the next
menu level or to confirm a
selection.
Appears to request confirmation
of an operation. Press the key
directly below to confirm.
Indicates that more options are
available in a scroll list, or that
you can adjust the volume.
Appears when in menu mode.
Press the key directly below to
return to the previous menu level.
Press the key directly below to
clear (delete) a character or
number when making an entry.
Long press to clear all.
17
01GB01COV.book Page 18 Wednesday, January 16, 2008 1:30 PM
5.4
Overview of the base station
A Handset locator key a
Locate handset.
Long press to start registration
procedure.
B Speaker
C Message counter
Steady ON: shows the number of old
messages.
Blinking: Shows the number of new
messages only.
Two horizontal bars “--” blinking:
Indicates that the answering machine
memory is full.
Also shows the base volume level when
adjusting the volume.
D On/Off key e
Short press to switch the answering
machine on/off.
E Volume keys -+
Increase or decrease the speaker volume.
There are 5 volume levels during
playback. There are 5 volume levels plus
OFF during idle mode and call screening.
18
F Erase key x
Short press to delete the current
message during message playback.
Long press (2 seconds) when in idle
mode to delete all old messages. (New
messages will not be deleted.)
G Previous key b
Go to previous message if pressed within
1 second of current message playback.
Replay current message if pressed after 1
second of current message playback.
H Next key f
Skip to the next message during message
playback.
Play/Stop key p
Play phone messages (the first recorded
will be played first). There will be a short
beep between messages and a double
beep when all messages have been
played.
Stop message playback.
Your phone
01GB01COV.book Page 19 Wednesday, January 16, 2008 1:30 PM
Getting started
6.1
Connect the base station
1 Place the base station in a central
location near the telephone line
socket and electricity socket.
2 Connect the line cord and the
power cable to their corresponding
connectors at the back of the base
station.
Connect the other end of the line
cord and power cable to their
respective sockets .
Note
The line adaptor may not be attached to
the line cord. In this case, you have to
connect the line adaptor to the line cord
first before plugging the line cord to the
line socket.
Warning
Avoid placing the base station too close
to large metal objects such as filing
cabinets, radiators or electrical
appliances. This can impair the range and
sound quality. Buildings with thick
internal and external walls may impair
transmission of signals to and from the
base.
Warning
Power is applied when the power
adaptor is plugged into the unit and
connected to the electricity socket. The
only way to power down the unit is to
unplug the power adaptor from the
electricity socket. Therefore, ensure that
the electricity socket is easily accessible.
The power adaptor and telephone line
cord have to be connected correctly, as
incorrect connection could damage the
unit. Always use the telephone line cord
supplied with the unit. Otherwise, you
may not get a dial tone.
6.2
Wall mounting the base
The base is designed to support wall
mounting. To wall mount the base, follow
the instructions below.
1 Remove the bracket from the back
of the base station by ➀ pressing
the two latches on the inside of the
Getting started
19
01GB01COV.book Page 20 Wednesday, January 16, 2008 1:30 PM
bracket and ➁ rotating the bracket
outward.
Turn the bracket around.
Attach the bracket to the opposite
side of the base station.
Use the pedestal wall mounting to
plug your base station.
20
6.3
Install your phone
Before using the handset, the batteries
have to be installed and fully charged.
Warning
When the batteries are inserted for the
first time, the unit will not be able to
start normally due to the low battery.
You must charge the batteries on the
base station before you can use the
handset.
6.3.1 Install battery
Warning
Always use AAA rechargeable batteries
supplied with your unit. If alkaline
batteries are used instead of
rechargeable batteries, “Warning
Batt” will show on the display and the
battery icon will blink quickly.
1 Slide out the battery cover.
Place the batteries in the correct
polarity as indicated and replace the
cover.
Getting started
01GB01COV.book Page 21 Wednesday, January 16, 2008 1:30 PM
6.3.2 Charge battery
Warning
The handset must be charged for at least
24 hours before using it for the first time.
When the battery level becomes low, the
low battery sensor warns you by blinking
the battery icon. If the battery level
becomes exceedingly low, the phone
automatically switches off shortly after
the icon starts blinking and any function
in progress will not be saved.
1 Place the handset on the charging
cradle of the base station. A beep is
emitted if the handset is placed
correctly.
2 The battery icon
on the display
blinks during charge.
3 The battery icon
becomes steady
when the handset is fully charged.
Note
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
The indoor and outdoor range of the
phone is up to 50 metres and 300 metres
respectively. When the handset moves
beyond the operation range, the antenna
icon
will blink.
Tip
When you reach the range limit the
conversation may become crackly. Move
closer to the base.
6.4
Attach/Remove belt clip
A belt clip allows you to carry your
handset on your belt.
Getting started
To attach the belt clip to your
handset, fit the tabs on the belt clip
into the slots at the back of the
handset and push into place.
To remove the belt clip, simply pull
the clip away from the handset.
6.5
Install optional headset
Your phone may be used with an optional
headset. To use this feature, insert the
headset plug into the headset jack. Your
phone is ready for hands-free
conversations.
6.6
Using multipacks
If you have purchased a multipack you
will have additional handsets, chargers,
power adaptors and AAA rechargeable
batteries.
1 Plug the chargers into a power
socket.
2 Install the batteries supplied into the
handsets.
3 Place the handsets on the chargers
to charge the batteries.
21
01GB01COV.book Page 22 Wednesday, January 16, 2008 1:30 PM
6.7
Menu structure
The SE655 has six menus as shown in the following table.
Menu Name
Icon
Phonebook
Personal Settings
Clock and Alarm
Advanced Settings
Network Services
Answer Machine
Press the menu key m to enter menu mode. Use navigation keys n to navigate
within the menus and all submenus.
Press o Select to enter the next lower menu level. Press c Back to go to the
previous menu level.
The charts below show the menu trees of your phone.
Phonebook
Phonebook
New Entry
List
Enter Name:
Enter Number:
Entry list displayed
Edit Entry
Select Melody
Entry list displayed
Melody details
for selected entry
Delete
Entry list displayed
Delete all?
Delete?
Delete All
Direct Memory
Key list and status
Edit
List of melodies
Delete
22
Getting started
01GB01COV.book Page 23 Wednesday, January 16, 2008 1:30 PM
Personal Settings
Personal Set
Handset Name
Handset Tones
Enter name
Ring Volume
No bar (off)
One bar
…
Five bars
Ring Tones
Progressive
Name of tones 1
…
Name of tones 15
Key Beep
Language
Wallpaper
On
Off
List of languages
Wallpaper 1
Wallpaper 2
Wallpaper 3
Contrast
Wallpaper off
Color 1
…
Color 4
Level 1
Backlight Time
Level 5
20 Seconds
Auto Hang-up
40 Seconds
60 Seconds
On
Color Theme
…
Off
Getting started
23
01GB01COV.book Page 24 Wednesday, January 16, 2008 1:30 PM
Clock and Alarm
Clock & Alarm
Set Date/Time
Set Format
Enter date & time
Time Format
12 Hours
Date Format
24 Hours
DD/MM
MM/DD
Alarm
Off
On Once
On Daily
Alarm Tone
24
Melody 1
Melody 2
Melody 3
Getting started
01GB01COV.book Page 25 Wednesday, January 16, 2008 1:30 PM
Advanced Settings
Advanced Set
Easy Call
Mode
On
Number
Off (by default)
Enter number
Conference
On (by default)
Call Barring
Enter PIN
Enter Number:
Off
Mode
On
Off (by default)
Number
Number 1
…
Number 4
XHD Sound
On (by default)
Off
Change PIN
Getting started
Register
Unregister
Reset
Area code
Reset?
Enter number
Auto Prefix
Detect Digit:
Dial Mode
Tone
Pulse
First Ring
On
Off
Prefix
25
01GB01COV.book Page 26 Wednesday, January 16, 2008 1:30 PM
Network Services
Netw. Services
Voice mail
Call
Settings
Enter Number
Answer Machine
Answer Machine
Play
Repeat
Next
Previous
Delete
Delete All
Answer On/Off
Record OGM
On
Off
Answer & Rec.
Answer Only
Play
Record Message
Delete
Play
Record Message
Delete
Answer Mode
Settings
Answer & Rec.
Answer Only
Ring Delay
3 Rings
4 Rings
5 Rings
6 Rings
7 Rings
8 Rings
Remote Access
Economy
Activate
HS Screening
On
Voice Language
List of languages
Deactivate (by default)
Off (by default)
26
Getting started
01GB01COV.book Page 27 Wednesday, January 16, 2008 1:30 PM
Using your phone
7.1
Make a call
7.1.1 Predialling
1 Enter the number. (A maximum of
24 digits including * and # are
allowed. Press c Clear to delete
the last digit.) Or long press to
delete all.
2 Press t.
• The call is initiated.
7.1.2 Direct dialling
1 Pick up the handset and press t.
(Or press l to start a call in
speaker mode.)
2 Dial the number.
• The call is initiated.
7.1.3 Call from redial list
1 Press r in idle mode.
2 Scroll n to an entry in the redial
list.
3 Press t.
• The call is initiated.
Note
You can also press t first and then
press c Redial to enter the redial list.
Then scroll n to select a number in the
list and press o Select. The number is
dialed automatically.
Using your phone
7.1.4 Call from the call log
Note
You need to subscribe to Caller Line
Identification service to be able to see
the caller's number or name in the call
log. See section 8.8.1 - “Access the Call
log”.
1 Press u in idle mode.
2 Press o Select to select Call
List.
Note
If the list is already empty, then “List
Empty” is displayed.
3 Scroll n to an entry in the call list.
4 Press t.
• The call is initiated.
7.1.4.1
To choose the format for
call log display
You must choose the correct format to
dial the area code and number of the call
log record chosen. The original incoming
number from the call log will appear as a
7, 10 or 11-digit number. If it is a long
distance call, the prefix digit 1 will
automatically appear in front of the 10digit local calls.
1 When viewing the call log, press *
to change the format of the call log
display as it should be dialed from
your location. For example, if the
call log entry appears as “234-5678900”:
• Press * once to display “1-234567-8900”
• Press * twice to display “5678900”
27
01GB01COV.book Page 28 Wednesday, January 16, 2008 1:30 PM
• Press * 3 times to display “1567-8900”
• Press * 4 times to display
“234-567-8900” again.
2 To dial the current displayed
number, press t key.
• The call is initiated.
Note
You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
log (see “Access the Call log” on
page 35).
When you store an incoming number in
the phonebook, the digits of the number
will be saved exactly as they appear on
the screen.
If the first 3 digits of the incoming
number corresponds to the local area
code set in your phone, they will be
filtered automatically when you press the
t or a key to dial. To change the
local area code, please refer to “Set Area
Code” on page 46.
7.1.5 Call from the phonebook
1 Press d in idle mode.
2 Scroll n to a phonebook entry.
3 Press t.
• The call is initiated.
Tip
Instead of scrolling n to browse the
phonebook entries, you can press the
numeric key corresponding to the first
letter of the entry you wish to locate.
For example, pressing 2 will show the
entries starting with A. Pressing 2 again
will show the entries starting with B, etc.
28
7.1.6 Call using Direct Access
Memory
Press a number key 3 to 9 for more
than 2 seconds to dial a stored direct
access memory number.
Note
See section 8.5.7 for instructions on how
to store, edit, and delete direct access
memory numbers.
7.1.7 Enter a Dialing Pause
Make a long press # after entering one
or more digits to enter a pause in the
dialling sequence. The pause is indicated
by a P.
7.2
Answer a call
Danger
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
When the phone rings, press the t
key.
• The call is established.
Note
• Incoming call has priority over other
events. Whenever there is an
incoming call, other status in progress
such as phone setting, menu
navigation, etc will be aborted.
Tip
You can mute the ring tone of an
incoming call before answering by
pressing on c Silent.
Using your phone
01GB01COV.book Page 29 Wednesday, January 16, 2008 1:30 PM
7.2.1 Handsfree answering
Danger
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
When the phone rings, press l.
• The handset loudspeaker is activated.
7.3
End a call
To end a conversation, press h.
• The call ends.
Tip
When auto hang-up is on, you can simply
place the handset back to its base station
or charger to end the call. This feature is
activated by default.
Note
The call duration (MM:SS) will be
displayed on the handset screen for
about 5 seconds.
Using your phone
29

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
Modify Date                     : 2008:03:03 10:03:28+08:00
Create Date                     : 2008:03:03 10:02:58+08:00
Title                           : 
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Page Count                      : 31
Mod Date                        : 2008:03:03 10:03:28+08:00
Creation Date                   : 2008:03:03 10:02:58+08:00
Metadata Date                   : 2008:03:03 10:03:28+08:00

EXIF Metadata provided by EXIF.tools