Panasonic of North America FZN1A Portable Handset with WLAN, Bluetooth and RFID User Manual RM01A OI PL
Panasonic Corporation of North America Portable Handset with WLAN, Bluetooth and RFID RM01A OI PL
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
RM151A_US_RMF _Draft2.0 Operating Instructions Smart Handheld EB-3901 Operating Instructions Read Me First Tablet Computer Model No. FZ-N1 series Safety Precautions ..................................................................2 Regulatory Information ......................................................... 10 Trademark and License Information....................................... 27 Accessories ........................................................................... 30 ⢠Refer to the Operating Instructions â Basic Guide by downloading from the URL below URL:- http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html Thank you for purchasing a Panasonic product. Please read this document carefully before using the product and keep this document in a safe place for future reference. For detailed information about this product, refer to the Reference Manual, which is available by tapping [Online Manual] in the productâs app list. (Download required.) Safety Precautions To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGER Denotes potential hazards that will result in serious injury or death. WARNING Denotes potential hazards that could result in serious injury or death. CAUTION Denotes potential hazards that could result in minor injury. NOTICE Denotes potential hazards that could result in property damage. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to specific operating procedures that must not be performed. This symbol is used to alert users to specific operating procedures that must be followed in order to operate the product safely. This symbol is used to alert users to specific operating procedures for which special attention is required. Battery DANGER The battery is for use solely with this product. Do not use it with any other products. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Charge the battery using the specified method. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. Do not throw the battery into a fire or expose it to excessive heat. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Do not disassemble, modify, or insert sharp foreign objects into the battery. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Do not short the positive (+) and negative (â) contacts. Do not carry the battery around or store it together with necklaces, hairpins, etc. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Keep the battery away from extreme heat, such as fire and direct sunlight. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. Do not expose the battery to water or other liquids. Electrolyte leakage, overheating, smoke, rupture, or fire may result. Safety Precautions Do not throw the battery or subject it to strong impact such as dropping or applying high pressure. Electrolyte leakage, overheating, smoke, rupture, or fire may result. ⢠Stop using the product if the battery is subjected to strong impact or if the battery is noticeably damaged or deformed. If the battery deteriorates, replace it with a new one. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. WARNING Do not directly touch electrolyte that has leaked from the battery. Electrolyte may enter the eyes and cause blindness, or may come into contact with skin or clothing and cause rashes. ⢠Flush with clean water without rubbing and seek medical advice. Do not place the battery in microwave ovens or pressurized containers. Sudden application of heat or pressure may damage the battery, resulting in electrolyte leakage, overheating, smoke, rupture, or a fire. If the battery smells or leaks electrolyte, keep the battery away from fire. Failure to do so may result in electrolyte leakage, overheating, smoke, rupture, or a fire. This product, charger WARNING When using the product for extended periods, do not expose your skin to the product for a prolonged period. Generated heat can cause low-temperature burns. Do not disassemble, repair, or modify the product. This may cause the battery to short circuit or overheat, which may result in a fire or electric shock. Do not insert foreign objects into the product. This may cause the battery to short circuit or overheat, which may result in a fire or electric shock. Do not allow conductive materials such as metal objects to touch the expansion bus connector. This may cause a short circuit and overheating, which may result in battery electrolyte leakage, overheating, smoke, rupture, or a fire. Do not place the product in microwave ovens or electromagnetic cookers. Doing so may cause overheating, smoke, or rupture, which may result in a fire. Do not touch the product or charger during lightning storms if the product is connected to a charger. There is a remote chance of electric shock. Safety Precautions Do not turn the volume up too loud when using headphones, etc. Listening at high volumes for extended periods may result in loss of hearing. Also, turn down the volume before connecting headphones, etc. to prevent sudden loud sounds. Keep SD cards and SIM cards out of the reach of infants and small children. Small objects are suffocation and choking hazards. In the event of accidental swallowing, seek medical help immediately. Do not operate the product while walking, driving, riding a bicycle, etc. Being distracted while engaging in these kinds of activities can cause accidents or falls. Do not use headphones, etc. while driving or in potentially dangerous areas or situations. Your inability to hear the sounds around you can cause accidents. Take special care at rail crossings, station platforms, roads, construction sites, etc. Use only specified batteries. Use of unspecified batteries may result in electrolyte leakage, overheating, smoke, rupture, or a fire. Immediately stop using the product if any of the following occurs. â Product is damaged â Water or foreign objects enter the product â Product emits smoke â Product emits unusual smell or sound â Product becomes unusually hot Continuing use may result in fire or electric shock. Immediately turn the product off, disconnect it from the power supply, and then remove the battery. Contact your technical support representative if any malfunction occurs. Close the headset jack cover and interface cover when using the product near water or other liquids, and in areas with a high concentration of moisture, steam, dust, oily vapors, etc. Foreign material that enters the product may cause fire or electric shock. If foreign material enters the product, turn the product off, disconnect it from the power supply, and then remove the battery. Contact your technical support representative for support or repair. Stop using the product immediately and consult your doctor if you feel any discomfort when staring at flashing lights on the screen. A very small percentage of individuals may experience seizures or blackouts when exposed to certain light patterns or flashing lights for extended periods. Do not look directly at the laser beam or point the barcode reader at another person's eyes. This may damage the eyes. Safety Precautions Do not use the product near automatic control equipment such as automatic doors, fire alarms, etc. RF signals generated by the product may interfere with the proper operation of such equipment. CAUTION Do not leave the product in areas with a high concentration of moisture, steam, dust, oily vapors, etc. for extended periods. Foreign material that enters the product may cause a fire or electric shock. Do not move the product while the charger is connected. There is a remote chance of electric shock. Make sure not to charge the product when it is wet. This may result in a fire or electric shock. Do not expose the skin to the product when using the product in hot or cold environments. Burns, low-temperature burns, or frostbite may result. If direct contact with the skin is necessary, perform the operation as quickly as possible. Do not place the product on an unstable surface. The product may drop, resulting in injury. Do not stack the product. If balance is lost, the product may fall over or drop, resulting in an injury. Do not look directly at the light emitter, or point the flash or barcode reader at another person's eyes. This may damage the eyes or cause temporary loss of eyesight which could result in an accident. Keep away from magnetic sources such as watches and magnetic cards. Failure to do so may cause data corruption or device malfunction. For safety purposes, pull the plug when cleaning the product or if you will not use it for extended periods. Failure to do so may result in a fire or electric shock. If the display is damaged, be careful of broken glass or internal components that may become exposed. Failure to do so can cause injury. Take a 10â15 minute break every hour when using the product. Using the product continuously for extended periods may cause strain injuries and may have detrimental health effects on your eyes, hands, or other parts of your body. Safety Precautions Regulatory Information This product and your health / Ce produit et votre santĂŠ This product and your health / Ce produit et votre santĂŠ This product, like other radio devices, emits radio frequency electromagnetic energy. Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ⢠Using this product on board of airplanes, or ⢠In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product. Ce produit ĂŠmet, comme dâautres appareils radio, de lâĂŠnergie ĂŠlectromagnĂŠtique Ă radiofrĂŠquence. Ce produit fonctionne selon les directives des normes et recommandations de sĂŠcuritĂŠ en matière de radiofrĂŠquences, nous pensons donc quâil peut ĂŞtre utilisĂŠ en toute sĂŠcuritĂŠ par les consommateurs. Ces normes et recommandations sont le reflet du consensus de la communautĂŠ scientifique et rĂŠsultent de dĂŠlibĂŠrations de panels et de commissions de scientifiques qui consultent et interprètent en permanence les nombreux documents de recherche. Dans 10 certaines situations ou dans certains environnements, lâutilisation du produit peut ĂŞtre limitĂŠe par le propriĂŠtaire des lieux ou par les reprĂŠsentants responsables de lâentreprise. Ces situations peuvent inclure : ⢠lâutilisation du produit en avion ou ⢠dans tout autre environnement oĂš le risque dâinterfĂŠrences au niveau dâautres appareils ou services est perçu ou identifiĂŠ comme ĂŠtant dangereux. Si vous nâĂŞtes pas sĂťr de la politique qui sâapplique Ă lâutilisation dâappareils sans fil dans une entreprise ou un environnement spĂŠcifique (aĂŠroports, par exemple), nous vous prions de bien vouloir demander lâautorisation avant dâallumer le produit. Information to the user / Avis aux utilisateurs Information to the user / Avis aux utilisateurs We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by such unauthorized modification will be the responsibility of the user. We and our authorized resellers or distributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. Nous ne pouvons ĂŞtre tenus responsables des interfĂŠrences au niveau de la radio ou de la tĂŠlĂŠvision causĂŠes par des modifications non autorisĂŠes du produit. La correction des interfĂŠrences causĂŠes par de telles modifications non autorisĂŠes relève de la responsabilitĂŠ de lâutilisateur. Nous et nos revendeurs et distributeurs agrĂŠĂŠs ne pouvons ĂŞtre tenus responsables pour les dommages ou les violations de rĂŠglementations gouvernementales qui peuvent survenir dans le cadre du non-respect des prĂŠsentes directives. Regulatory Information 11 Additional safety precautions Additional safety precautions Posted facilities ⢠Turn off the product when in hospitals, health care facilities, or any facility where posted notices require you to do so. Hospitals and health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers ⢠Medical device manufacturers recommend a minimum separation of 15 cm between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. ⢠Persons with pacemakers: â Should ALWAYS keep this product more than 15 cm from their pacemaker when this product is turned ON; â Should use the ear opposite the pacemaker to minimize the potential for interference; â Should not carry this product in a breast pocket; â Should turn off the product immediately if there is any reason to suspect that interference is taking place. Hearing aids ⢠Some digital wireless products may interfere with some hearing aids. In the event of such interference, consult the manufacturer of your hearing aid to discuss alternatives. Other medical devices ⢠If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. 12 Aircraft ⢠Turn off the product after boarding an aircraft, when instructed by flight staff. Obey instructions from flight staff regarding the use of the product in flight. Using this product in an aircraft may be hazardous to the aircraftâs operation and disrupt wireless communication, and may also be illegal. Potentially explosive atmosphere ⢠Turn off the product in areas where a potentially explosive atmosphere exists and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in injury or even death. ⢠Areas with potentially explosive atmosphere may include fueling areas, chemical plants, below deck on boats, fuel or chemical transfer or storage facilities, vehicles using petroleum or natural gas, or areas where the atmosphere contains particles such as grain, dust, or metallic powders, and any other area where you would normally be advised to turn off your vehicle engine. Electronic devices ⢠This product receives and transmits radio frequency signals while switched on. Most electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from this product. Therefore, the use must be restricted in certain situations to avoid interference. Driving ⢠Give full attention to driving. Driving safely is your first responsibility. ⢠Pull off the road and park before placing or answering a call. It is unsafe to operate the product while driving. ⢠Check the laws and regulations in the areas where you drive, and always obey them. Regulatory Information 13 ⢠Only qualified personnel should install the product in a vehicle. Check regularly that the product is securely mounted in your vehicle and operating properly. ⢠Do not place or install the product in the area over the air bag or in the air bag deployment area. If the air bag inflates, serious injury and/or damage could result. ⢠RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Consult the manufacturer (or its representative) of the vehicle and any equipment that has been added to the vehicle regarding the use of mobile products. ⢠Use hands-free operation, if available and legally permitted. Emergency communications ⢠Never rely solely on a mobile product for essential or emergency communications. Network connections can be affected by remaining battery level, radio signals, service networks, and other conditions, and as a result, emergency communications cannot be guaranteed in all conditions. Antenna ⢠Do not replace the antenna. Unauthorized antennas, modifications, or attachments could damage the product and may violate regulations. ⢠Do not touch or cover the antenna area while the product is on. Call quality, power levels, and the overall performance of the product may be affected and may violate regulations. Volume ⢠Do not turn the volume up too loud when using headphones and earphones. ⢠Exposure to excessive sound pressure levels for extended periods may cause hearing damage. ⢠Being unable to hear sounds in your environment may lead to accidents. 14 Intended use Intended use ⢠This product is not intended for use as, or as part of, nuclear equipment/systems, air traffic control equipment/systems, aircraft cockpit equipment/systems*1, medical devices or accessories*2, life-support systems or other equipment/devices/systems that are involved with ensuring human life or safety. Panasonic will not be responsible for any liability resulting from the use of this product arising out of the foregoing uses. *1 Aircraft cockpit equipment/systems include Class 2 Electrical Flight Bag (EFB) Systems and Class 1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class 1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36. *2 As defined by the European Medical Device Directive (MDD) 93/42/EEC. ⢠Panasonic cannot guarantee any specifications, technologies, reliability, safety (e.g., Flammability/Smoke/Toxicity/Radio Frequency Emission, etc.) requirements related to aviation standards and medical equipment standards that differ from the specifications of our COTS (Commercial-Off-The-Shelf) products. ⢠This product is not intended for use in medical equipment including life-support systems, air traffic control systems, or other equipment, devices or systems that are involved with ensuring human life or safety. Panasonic cannot be held responsible in any way for any damages or loss resulting from the use of this unit in these types of equipment, devices or systems, etc. This product has been designed so as to minimize shock to the LCD, the leakage of liquid (e.g., water) on to the buttons, etc., but no warranty is provided against such trouble. Therefore, as a precision instrument, be extremely careful in the handling of the product. Regulatory Information 15 For USA For USA FCC Part 15 information This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures. ⢠Reorient or relocate the receiving antenna. ⢠Increase the separation between the product and receiver. ⢠Connect the product to an outlet on a circuit different from that to which the receiver is connected. ⢠Consult the dealer or an experienced radio/TV technician for help. FCC caution To assure continued FCC emission limit compliance, use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This product complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This product may not cause harmful interference, and 2. This product must accept any interference received, including interference that may cause undesired operation. 16 FCC RF exposure information This product meets the governmentâs requirements for exposure to radio waves. This product is a radio transmitter and receiver. This product is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this product can be found under Basic Guide of http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html For body-worn operation, this product has been tested and meets FCC RF exposure guidelines when used with a Panasonic accessory designated for this product and when used with an accessory that contains no metal and that positions the mobile device a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The FCC has granted an Equipment Authorization for this product with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this product is on file with the FCC and can be found by searching for the productâs FCC ID number at http://www.fcc.gov/oet/ea/fccid. To find the FCC ID number for your product, first remove the battery pack. The FCC ID number is printed on the nameplate underneath. Regulatory Information 17 Wi-Fi use High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. Using hearing aids with mobile devices When some wireless mobile devices are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and mobile devices also vary in the amount of interference they generate. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. The wireless telephone industry has developed ratings for some of their mobile devices, to assist hearing device users in finding mobile devices that may be compatible with their hearing devices. Not all mobile devices have been rated. Mobile devices that are rated have the rating on their box or label located on the box. The ratings are not guarantees. Results will vary depending on the userâs hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated mobile device successfully. Trying out the mobile device with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Mobile devices rated M3 or M4 are likely to generate less interference to hearing devices than mobile devices that are not labeled. M4 is the better/higher of the two ratings. T-Ratings: Mobile devices rated T3 or T4 are likely to be more usable with a hearing deviceâs telecoil (âT-Coil Switchâ or âTelephone Switchâ) than unrated mobile devices. T4 is the better/higher of the two ratings. (Note that the hearing aid telecoil must be activated in order for it to function, and that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile devices. 18 The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard. Hearing aid compatibility This mobile device has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this mobile device that have not been tested yet for use with hearing aids. It is important to try the different features of this mobile device thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this mobile device for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or mobile retailer. Responsible party Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102, USA Support contact: http://business.panasonic.com/support-computerstablets Disposal USA Only: Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149. TTY information For hearing or speech impaired TTY users, call 1-877-833-8855 using a TTY device. Regulatory Information 19 For Canada / Pour le Canada For Canada / Pour le Canada Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Industrie Canada Le prĂŠsent appareil est conforme aux CNR dâIndustrie Canada applicables aux appareils radio exempts de licence. Lâexploitation est autorisĂŠe aux deux conditions suivantes : (1) lâappareil ne doit pas produire de brouillage, et (2) lâutilisateur de lâappareil doit accepter tout brouillage radioĂŠlectrique subi, mĂŞme si le brouillage est susceptible dâen compromettre le fonctionnement. Wi-Fi use This product (local network devices) for the band 5150- 5250 MHz is only indoor usage to reduce potential for harmful interference to cochannel Mobile Satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN (licenceexempt local area network) devices. Utilisation Wi-Fi Ce produit (appareils pour rĂŠseaux locaux) pour les bandes de frĂŠquences 5 150-5 250 MHz est rĂŠservĂŠ Ă une utilisation Ă lâintĂŠrieur afin de rĂŠduire le risque dâinterfĂŠrence avec les systèmes satellites mobiles utilisant les mĂŞmes canaux. Les radars forte puissance sont dĂŠsignĂŠs comme ĂŠtant les premiers utilisateurs (câest-Ă -dire quâils ont la prioritĂŠ) des bandes de 20 frĂŠquences 5 250-5 350 MHz et 5 650-5 850 MHz. Ces radars peuvent provoquer des interfĂŠrences et/ou des dommages aux dispositifs LAN-EL (rĂŠseaux locaux exempts de licence). RF exposure information This product complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. This product is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by Industry Canada. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by Industry Canada is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by Industry Canada for each model. The highest SAR value for this product can be found under Basic Guide of http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html For body-worn operation, this product has been tested and meets the RF exposure guidelines when used with a Panasonic accessory designated for this product and when used with an accessory that contains no metal and that positions the mobile device a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with the RF exposure guidelines. Information sur lâexposition aux radiofrĂŠquences (RF) Ce produit est conforme aux limites dâexposition dâIndustrie Canada ĂŠtablies pour un environnement non contrĂ´lĂŠ. Ce produit est un ĂŠmetteur-rĂŠcepteur radio. Il a ĂŠtĂŠ conçu et fabriquĂŠ de Regulatory Information 21 façon Ă ne pas dĂŠpasser les limites dâĂŠmission ĂŠtablies par Industrie Canada pour lâexposition Ă lâĂŠnergie des radiofrĂŠquences (RF). Ces directives sont fondĂŠes sur des normes ĂŠlaborĂŠes par des organisations scientifiques indĂŠpendantes au moyen dâune ĂŠvaluation pĂŠriodique et rigoureuse dâĂŠtudes scientifiques. Ces normes comprennent une marge de sĂŠcuritĂŠ substantielle conçue pour assurer la sĂŠcuritĂŠ de toutes les personnes, quel que soit leur âge ou leur ĂŠtat de santĂŠ. La norme dâexposition pour les combinĂŠs sans fil utilise une unitĂŠ de mesure appelĂŠe dĂŠbit dâabsorption spĂŠcifique ou DAS. La limite DAS fixĂŠe par Industrie Canada est de 1,6 W/kg. Les essais portant sur le DAS sont effectuĂŠs en utilisant les positions et les emplacements dâutilisation (par ex. au niveau de lâoreille et portĂŠ au niveau du corps) spĂŠcifiĂŠs par Industrie Canada pour chaque modèle. Les valeurs de DAS les plus ĂŠlevĂŠes obtenues pour ce produit se trouvent dans le Guide de base Ă lâadresse http://pc-dl.panasonic.co.jp/itn/manual/menu_en.html Pour lâutilisation lorsque lâappareil est portĂŠ sur soi, ce produit a ĂŠtĂŠ testĂŠ et dĂŠclarĂŠ conforme aux directives dâexposition aux radiofrĂŠquences (RF) dans le cas dâune utilisation avec un accessoire Panasonic conçu pour ce produit et dans le cas dâune utilisation avec un accessoire ne contenant pas de mĂŠtal et qui maintient lâappareil mobile Ă une distance dâau moins 1,0 cm du corps. En cas dâutilisation avec dâautres accessoires, il est possible que la conformitĂŠ aux directives dâexposition aux radiofrĂŠquences (RF) ne soit pas assurĂŠe. 22 General information / Informations gĂŠnĂŠrales General information / Informations gĂŠnĂŠrales CAUTION / ATTENTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Il y a risque dâexplosion si la batterie est remplacĂŠe par une batterie de type incorrect. Mettre au rebut les batteries usagĂŠes conformĂŠment aux instructions. Recycle information A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Lâappareil que vous vous ĂŞtes procurĂŠ est alimentĂŠ par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. Laser device caution / Mise en garde concernant les appareils laser Laser device caution / Mise en garde concernant les appareils laser CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Regulatory Information 23 This product is using lasers that comply with DHHS RULE 21 CFR CHAPTER I, SUBCHAPTER J and IEC60825-1:2007 regulations. This product utilizes a âClass 2â laser. Class 2 laser readers use a low power, visible diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Caution: Procedures other than those specified herein may result in hazardous radiation exposure. ATTENTION ! CE PRODUIT UTILISE UN LASER. LâUTILISATION DE COMMANDES OU DE RĂGLAGES OU LâEXĂCUTION DE PROCĂDURES AUTRES QUE CEUX INDIQUĂS ICI PEUT ENTRAĂNER LâEXPOSITION Ă DES RADIATIONS DANGEREUSES. NâOUVREZ PAS LES CACHES ET NE PROCĂDEZ PAS AUX RĂPARATIONS VOUS-MĂME. CONFIEZ LâENTRETIEN Ă DU PERSONNEL QUALIFIĂ. Ce produit utilise des lasers conformes aux rĂŠglementations IEC60825-1:2007. Ce produit utilise un laser de classe 2. Les lecteurs laser de classe 2 utilisent une diode visible de faible puissance. Comme avec toute source de lumière très vive, telle que le soleil, lâutilisateur doit ĂŠviter de regarder directement le faisceau lumineux. Lâexposition momentanĂŠe Ă un laser de classe 2 nâest pas connue comme ĂŠtant dangereuse. Attention : les procĂŠdures autres que celles indiquĂŠes ici peuvent entraĂŽner lâexposition Ă des radiations dangereuses. 24 Labeling and device location / Ătiquetage et emplacement de lâappareil (The product illustration is shown with the included Battery Pack installed. / Le produit est illustrĂŠ avec la batterie fournie installĂŠe.) Barcode reader / Lecteur de codes Ă barres When the included Battery Pack (FZ-VZSUN110U) is installed: Quand la batterie fournie (FZ-VZSUN110U) est installĂŠe : When the optional Extended life Battery Pack (FZ-VZSUN120U) is installed: Quand la batterie Ă autonomie prolongĂŠe optionnelle (FZ-VZSUN120U) est installĂŠe : Regulatory Information 25 Laser radiation information ⢠Wavelength: 630-680 nm ⢠Pulse duration: approx. 10 msec ⢠Repetition rate: approx. 1000/18 Hz ⢠Maximum power: 1 mW max ⢠Aiming pattern angle: 48.0° horizontal, 38.0° vertical Informations sur les rayonnements laser ⢠Longueur dâonde : 630-680 nm ⢠DurĂŠe dâimpulsion : environ 10 ms ⢠Frequence de repetition : environ 1000/18 Hz ⢠Puissance max. : 1 mW max ⢠Angle de visĂŠe : 48,0° horizontal, 38,0° vertical 26 Trademark and License Information Trademarks ⢠The BluetoothÂŽ word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Panasonic Corporation is under license. ⢠microSDXC Logo is a trademark of SD-3C, LLC. ⢠The N-Mark logo is a trademark or registered trademark of NFC Forum. ⢠Android is a trademark of Google, Inc. ⢠Wi-Fi, the Wi-Fi logo, the Wi-Fi CERTIFIED logo and Wi-Fi CERTIFIED are trademarks or registered trademarks of Wi-Fi Alliance. ⢠All other trademarks identified herein are the property of their respective owners. License Information ⢠This product is licensed under the MPEG-4 patent portfolio license and AVC patent portfolio license for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the MPEG-4 Visual Standard and AVC Standard (âMPEG-4/AVC Videoâ) and/or (ii) decode MPEG-4/AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide MPEG4/AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com. ⢠This product contains software licensed in compliance with GNU General Public License Version 2.0 (GPL v2.0), GNU Lesser General Public License (LGPL) or any other license. Trademark and License Information 27 The program is free software; you can copy it, redistribute it, and modify it under the terms of the GPL v2.0, LGPL or any other license. At least three (3) years from delivery of products, Panasonic System Networks Co., Ltd. will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2.0 and LGPL or any other license. Additionally, we will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution. Contact Information oss-cd-request@gg.jp.panasonic.com Source code is also freely available to the public via the web site listed below. http://panasonic.net/avc/oss/index.html Please note that we cannot respond to any inquiries regarding the source code. For more details on the relevant software (including license information of GPL v2.0 and LGPL), refer to the information displayed on the following screen: home screen â â [Settings] â [About tablet] â [Legal information]. ⢠This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/source/license.html) ⢠This product includes the Independent JPEG Group's software. This software is based in part on the work of the Independent JPEG Group. ⢠This product includes the software distributed under the terms of The FreeType Project License. This software is based in part of the work of the FreeType Team. 28 ⢠ICU 1.8.1 and later Copyright (c) 1995-2011 International Business Machines Corporation and others. ⢠This product includes other free software or open source software. ⢠For more details on the relevant software (including license information), refer to the information displayed on the following screen: home screen â â [Settings] â [About tablet] â [Legal information]. ⢠TouchSenseÂŽ Technology licensed from Immersion Corporation. TouchSense and other Immersion software contained herein are protected under one or more of the U.S. Patents found at the following address www.immersion.com/patent-marking.html and other patents pending. Trademark and License Information 29 Accessories Product name Model number AC Adaptor CF-AA6373A Battery Pack FZ-VZSUN110U FZ-VZSUN120U Cradle FZ-VEBN111 Charging Cup FZ-VCBN11U Holster FZ-VSTN12U Hand Strap FZ-VSTN11U 30 Accessories 31 Two Riverfront Plaza, Newark, NJ 07102, USA Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Š Panasonic System Networks Co., Ltd. 2016 &*3:<#, *DHQX1149ZA/J1* DHQX1149ZA/J1 C0216-0 Printed in Japan
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : gou.miyahara Create Date : 2016:01:29 11:16:28Z Modify Date : 2016:02:09 12:39:37-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : FrameMaker 8.0 Metadata Date : 2016:02:09 12:39:37-05:00 Format : application/pdf Creator : gou.miyahara Title : RM01A_OI_PL.book Document ID : uuid:45c09ba8-52ed-4eab-84da-caf4e0776a08 Instance ID : uuid:9e0a9eb7-722c-42be-a4cf-c0a7e0f54f35 Page Mode : UseOutlines Page Count : 32EXIF Metadata provided by EXIF.tools